If you have difficulty in submitting comments on draft standards you can use a commenting template and email it to admin.start@bsigroup.com. The commenting template can be found here.
This document applies to continuously hot-dip coated products made of low carbon steels for cold forming, of steels for construction and steels with high proof strength for cold forming coated with zinc (Z), zinc-iron alloy (ZF), zinc-aluminium alloy (ZA), aluminium-zinc alloy (AZ), zinc-magnesium alloy (ZM), aluminium-silicon alloy (AS) or aluminium (A) and for continuously hot-dip coated products made of multiphase steels for cold forming coated with zinc (Z), zinc-iron alloy (ZF), zinc-aluminium alloy (ZA) or zinc-magnesium alloy (ZM) with a minimum thickness of 0,20 mm and a maximum thickness of 6,50 mm, delivered as sheet, wide strip , sheet. slit wide strip or cut lengths obtained from slit wide strip or
By agreement at the time of enquiry and order, this document is applicable to continuously hot-dip coated flàt products of an expanded validity range defined for thicknesses t < 0,20 mm.
The concerned standard is prEN 10346 [1] .
It does not apply for
— hot-rolled sheet and strip without coating (see EN 10051 [2]) and
— uncoated or electrolytically coated cold rolled sheet and strip (see 2 Normative references EN 10131 [3]).
Required form fields are indicated by an asterisk (*) character.
You are now following this standard. Weekly digest emails will be sent to update you on the following activities:
You can manage your follow preferences from your Account. Please check your mailbox junk folder if you don't receive the weekly email.
You have successfully unsubscribed from weekly updates for this standard.
Comment by: