If you have difficulty in submitting comments on draft standards you can use a commenting template and email it to admin.start@bsigroup.com. The commenting template can be found here.
Standards Development
This document specifies functional requirements for the design, construction, testing, commissioning/decommissioning, operation, maintenance and, where appropriate, calibration, together with suitable documented provisions for all new gas measuring systems and any major changes of existing systems.
This document also specifies accuracy classes of measuring systems and thresholds applicable to these classes. Demonstration of compliance is achieved through the selection, installation and operation of appropriate measurement instruments, together with suitable documented provisions for calculations. Examples of demonstration of compliance are provided for each accuracy class; however, they are not prescriptive solutions.
This document is applicable for gases of the 2nd family as classified in EN 437. It is also applicable for treated non-conventional combustible gases complying with EN 437 and for which a detailed technical evaluation of the functional requirements (such as injected biomethane) is performed ensuring there are no other constituents or properties of the gases that can affect the metrological and physical integrity of the measuring systems. This version mentions technical topics to consider when hydrogen and natural gas / hydrogen blends flow through the measuring systems. Blends with a hydrogen content between 20mol% and 98 mol% are not considered by this standard. This document applies to hydrogen with a purity as specified in CEN/TS 17977 for rededicated natural gas systems.
This document can also be used as a guideline for measuring systems for other gases e.g. gaseous CO2 for CCUS.
This document does not apply to for raw or sour gases.
This document does not apply to for gas measurement in CNG filling stations.
This document gives guidelines when designing, installing and operating gas meters with additional functionalities (smart gas meters).
Communication protocols and interfaces for gas meters and remote reading of gas meters are outside the scope of this document and are covered by the appropriate parts of the EN 13757 series. which provide a number of protocols for meter communications. Supervisory control and data acquisition protocols (SCADA) are also not covered by this document.
Unless otherwise specified all pressures used in this document are gauge pressures. For associated pressure regulating systems the requirements of EN 12186 and/or EN 12279 apply.
For requirements on design, housing, lay-out, materials for components, construction, ventilation, venting and overall safety of gas measuring systems within the scope of this document, the EN 15001 series, EN 12186, EN 12279 and/or EN 1775 apply additionally, where relevant.
During implementation of the standard mistakes in the references in the informative Annex I 'Hydrogen and its blends with natural gas' have been identified. An easy correction of the reference version at CCMC level was not acceptable due to CEN rules.
The correction would ensure the proper understanding and application of the provisions. Especially the fact that this annex gives significant guidance for the use of the standard for hydrogen in gas infrastructure, i.e. a climate policy topic for decarbonisation of the energy systems, makes a correction necessary.
You are now following this standard. Weekly digest emails will be sent to update you on the following activities:
You can manage your follow preferences from your Account. Please check your mailbox junk folder if you don't receive the weekly email.
You have successfully unsubscribed from weekly updates for this standard.
Comment on proposal
Required form fields are indicated by an asterisk (*) character.