Standards Development
This European Standard specifies the requirements and tests to be performed for electric tubular or square drives without driven part, to be applied to power operated blinds and shutters, in addition to their conformity to the electrical safety requirements specified in EN 60335-1 and EN 60335-2-97. It does not apply to drives with driven part.
The main goal for this revision is to address the following issues:
1. The current test method cannot be used for drives with very high and very low torques (e.g. interior application);
2. The torque applied to the motors on the bench does not represent the “real” torque when complete products are operated, especially in the case of folding arm awnings;
3. The number of cycles carried out on motors are in some cases different to those applied to complete products to assign an endurance class;
4. Battery powered products are not addressed while they now represent an important part of the market, especially for the renovation market.
You are now following this standard. Weekly digest emails will be sent to update you on the following activities:
You can manage your follow preferences from your Account. Please check your mailbox junk folder if you don't receive the weekly email.
You have successfully unsubscribed from weekly updates for this standard.
Comment on proposal
Required form fields are indicated by an asterisk (*) character.