Standards Development

Scope

This document describes the following:

—     polling for proximity cards or objects (PICCs) entering the field of a proximity coupling device (PCD);

—     the byte format, the frames and timing used during the initial phase of communication between PCDs and PICCs;

—     the initial Request and Answer to request command content;

—  methods to detect and communicate with one PICC among several PICCs (anticollision);

—     other parameters required to initialize communications between a PICC and PCD;

—     optional means to ease and speed up the selection of one PICC among several PICCs based on application criteria;

—     optional capability to allow a device to alternate between the functions of a PICC and a PCD to communicate with a PCD or a PICC, respectively. A device which implements this capability is called a PXD.

Protocol and commands used by higher layers and by applications and which are used after the initial phase are described in ISO/IEC 14443-4.

This document is applicable to PICCs of Type A and of Type B (as described in ISO/IEC 14443-2), to PCDs (as described in ISO/IEC 14443-2) and to PXDs.

NOTE 1 Part of the timing of data communication is defined in ISO/IEC 14443-2.

NOTE 2 Test methods for this document are defined in ISO/IEC 10373-6.