Standards Development

Scope

This document specifies the performance requirements, test methods and required test results of equipment conforming to performance standards not inferior to those adopted by the IMO in resolution MSC.530(106)/Rev.1.This document is based upon the performance standards of IMO resolution MSC.530(106)/Rev.1, and is also associated with IMO resolution A.694(17) and IEC 60945. Reference is made, where appropriate, to IMO resolutions MSC.191(79) and MSC.530(106)/Rev.1, and all subclauses whose wording is identical to that in the resolutions are printed in italics.In association with the above IMO resolution MSC.530(106)/Rev.1, are the International Hydrographic Organization (IHO) publications[1]. IHO S-32, IHO S-52, IHO S-57, IHO S-61, IHO S-63, IHO S-64, S-98, S-100, S-101, S-102, S-104, S-111, S-124, S-128, 129 and S-164. This document has included extracts from the above publications where they are applicable to this equipment. Where reference is made, all subclauses whose wording is identical to that in the publications, are printed in italics.(530/A2.1) These performance standards should apply to all ECDIS equipment carried on all ships as follows:–        dedicated standalone workstation.–        a multifunction workstation as part of an INS.(530/A2.2) These performance standards apply to ECDIS mode of operation, ECDIS in RCDS mode of operation as specified in Annex G and ECDIS backup arrangements as specified in Annex F.(530/A2.3) Requirements for structure, format, encryption and presentation of the ENDS are within the scope of relevant IHO standards, including those listed in the normative references.The requirements of this document are not intended to prevent the use of new techniques in equipment and systems, provided the facilities offered are not inferior to those stated.