Standards Development

Scope

This document specifies the mounting dimensions of the accessories regarding on interchangeability for 16 MPa (160 bar) compact cylinders conforming to ISO 6020-3. The accessories are applied to mounting with cylinders manufactured in accordance with ISO 6020-3, but this does not limit their application.

This document covers the following accessories of which the identification code is specified in ISO 6099:

— AP2 – rod clevis, female thread (see Figure 1 and Table 1);

— AP4 – rod eye, plain, female thread (see Figure 2 and Table 2);

— AA4 - L – pivot pin (locking plate) (see Figure 3 and Table 3);

— AL6 – locking plate for pivot pin (see Figure 4 and Table 4);

— AA4 - S and AA4 - R – pivot pin plain (see Figure 5-6 and Table 5 respectively).

The design of these accessories is based on the maximum forces derived from pressures and bore diameters of the cylinders specified in ISO 2944 and ISO 3320.