| BS ISO 9801:1997 | BS ISO 9801:1997 | | |
| BS EN 61196-3:1999 (R06) | BS EN 61196-3:1999 (R06) | | |
| PD IEC/TR 62152:2004 | Background of terms and definitions of cascaded two-ports | Withdrawn |
| BS EN 61726:2000 | Cable assemblies, cables, connectors and passive microwave components. Screening attenuation measurement by the reverberation chamber method | Current, Work in Hand |
| BS EN 50441-1:2006 | Cables for indoor residential telecommunication installations - Unscreened cables. Grade 1 | Withdrawn |
| BS EN 50441-2:2006 | Cables for indoor residential telecommunication installations - Screened cables. Grade 2 | Withdrawn |
| BS EN 50441-3:2006 | Cables for indoor residential telecommunication installations - Screened cables. Grade 3 | Current |
| BS EN 50441-1:2012 | Cables for indoor residential telecommunication installations - Unscreened cables. Grade 1 | Current |
| BS EN 50441-2:2012 | Cables for indoor residential telecommunication installations - Screened cables. Grade 1 | Current |
| BS EN 50441-4:2012 | Cables for indoor residential telecommunication installations - Cables up to 1 200 MHz. Grade 3 | Current |
| PD IEC/TR 60344:2007 | Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires. Application guide | Current |
| BS EN 62562:2011 | Cavity resonator method to measure the complex permittivity of low-loss dielectric plates | Current |
| DD IEC/PAS 62562:2008 | Cavity resonator method to measure the complex permittivity of low-loss dielectric plates | Withdrawn |
| BS 5425-1:1986 | Coaxial cable for wideband distribution systems - Specification for single unit, semi-airspaced cables for wideband distribution systems | Withdrawn |
| BS EN 50117-2:1996 | Coaxial cables - Sectional specification for indoor drop cables | Withdrawn |
| BS EN 50117-1:1997 | Coaxial cables - Generic specification | Withdrawn |
| BS EN 50117-4-1:2008 | Coaxial cables - Sectional specification for cables for BCT cabling in accordance with EN 50173. Indoor drop cables for systems operating at 5 MHz - 3000 MHz | Current, Work in Hand |
| BS EN 50117-2-1:2005+A1:2008 | Coaxial cables - Sectional specification for cables used in cabled distribution networks. Indoor drop cables for systems operating at 5 MHz - 1000 MHz | Current, Work in Hand |
| BS EN 50117-2-3:2004+A1:2008 | Coaxial cables - Sectional specification for cables used in cabled distribution networks. Distribution and trunk cables for systems operating at 5 MHz - 1000 MHz | Current, Work in Hand |
| BS EN 50117-2-4:2004+A1:2008 | Coaxial cables - Sectional specification for cables used in cabled distribution networks. Indoor drop cables for systems operating at 5 MHz - 3000 MHz | Current, Work in Hand |
| BS EN 50117-2-2:2004+A1:2008 | Coaxial cables - Sectional specification for cables used in cabled distribution networks. Outdoor drop cables for systems operating at 5 MHz - 1000 MHz | Current, Work in Hand |
| BS EN 50117-2-5:2004+A1:2008 | Coaxial cables - Sectional specification for cables used in cabled distribution networks. Outdoor drop cables for systems operating at 5 MHz - 3000 MHz | Current, Work in Hand |
| BS EN 50117-1:2002 | Coaxial cables - Generic specification | Current, Work in Hand |
| BS EN 50117-3:1996 | Coaxial cables used in cabled distribution networks - Sectional specification for outdoor drop cables | Current |
| BS EN 50117-4:1996 | Coaxial cables used in cabled distribution networks - Sectional specification for distribution and trunk cables | Current |
| PD CLC/TR 50117-8:2013 | Coaxial cables used in cabled distribution networks - Repair and substitute of damaged buried cables | Current |
| BS EN 50117-6:1997 | Coaxial cables used in cabled distribution networks - Sectional specification for outdoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz | Current |
| BS EN 50117-5:1997 | Coaxial cables used in cabled distribution networks - Sectional specification for indoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz | Current |
| BS EN 50117-2-1:2002 | Coaxial cables. Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 1000 MHz | Withdrawn |
| BS EN 50117-3-1:2002 | Coaxial cables. Sectional specifications for cables used in telecom applications - Miniaturized cables used in digital communication systems | Current |
| BS EN 61196-4:2004 | Coaxial communication cables - Sectional specification for radiating cables | Current |
| BS EN 50290-2-21:2002 | Communication cables - Common design rules and construction. PVC insulation compounds | Current |
| BS EN 50290-2-22:2002 | Communication cables - Common design rules and construction. PVC sheathing compounds | Current |
| BS EN 50290-2-27:2002+A1:2007 | Communication cables - Common design rules and construction. Halogen free flame retardant thermoplastic sheathing compounds | Current |
| BS EN 50290-2-24:2002+A1:2008 | Communication cables - Common design rules and construction. PE sheathing | Current |
| BS EN 50290-4-2:2008 | Communication cables - General considerations for the use of cables. Guide to use | Current, Work in Hand |
| BS EN 50290-2-26:2002 | Communication cables - Common design rules and construction. Halogen free flame retardant insulation compounds | Current |
| BS EN 50290-2-1:2005 | Communication cables - Common design rules and construction | Current |
| BS EN 50290-1-2:2004 | Communication cables - Definitions | Current |
| BS EN 50290-1-1:2001 | Communication cables. - General | Current |
| BS EN 50290-2-23:2002 | Communication cables. Common design rules and construction - PE insulation | Current, Work in Hand |
| BS EN 50290-2-25:2002 | Communication cables. Common design rules and construction - Polypropylene insulation compounds | Current, Work in Hand |
| BS EN 50290-2-28:2002 | Communication cables. Common design rules and construction - Filling compounds for filled cables | Current |
| BS EN 50290-2-29:2002 | Communication cables. Common design rules and construction - Cross-linked PE insulation compounds | Current |
| BS EN 50290-2-30:2002 | Communication cables. Common design rules and construction - Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing | Current |
| BS EN 50290-2-20:2001 | Communication cables. Common design rules and construction - General | Current |
| BS EN 50290-4-1:2002 | Communication cables. General considerations for the use of cables - Environmental conditions and safety aspects | Current, Work in Hand |
| BS EN 50289-1-16:2007 | Communication cables. Specifications for test methods - Electromagnetic performance. Coupling attenuation of cable assemblies (field conditions) | Current |
| BS EN 50289-1-12:2005 | Communication cables. Specifications for test methods - Electrical test methods - Inductance | Current |
| BS EN 50289-4-12:2004 | Communication cables. Specifications for test methods - Environmental test methods - Vertical flame spread test on bunched small communication cables | Current |
| BS EN 50289-1-13:2004 | Communication cables. Specifications for test methods - Electrical test methods - Coupling attenuation or screening attenuation of patch cords/coaxial cable assemblies/pre-connectorised cables | Current |
| BS EN 50289-1-14:2004 | Communication cables. Specifications for test methods - Electrical test methods - Coupling attenuation or screening attenuation of connecting hardware | Current |
| BS EN 50289-1-15:2004 | Communication cables. Specifications for test methods - Electromagnetic performance - Coupling attenuation of links and channels (laboratory conditions) | Current |
| BS EN 50289-4-4:2008 | Communication cables. Specifications for test methods - Environmental test methods. Resistance to solvents and contaminating fluids | Current |
| BS EN 50289-4-5:2008 | Communication cables. Specifications for test methods - Environmental test methods. Climatic sequence | Current |
| BS EN 50289-4-7:2008 | Communication cables. Specifications for test methods - Environmental test methods. Damp heat, steady state | Current |
| BS EN 50289-4-16:2012 | Communication cables. Specifications for test methods - Environmental test methods. Circuit integrity under fire conditions | Current |
| BS EN 50289-4-17:2011 | Communication cables. Specifications for test methods - Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable | Current |
| BS EN 50289-1-9:2002 | Communication cables. Specifications for test methods. Electrical test methods - Unbalance attenuation (longitudinal conversion loss, longitudinal conversion transfer loss) | Current |
| BS EN 50289-1-6:2002 | Communication cables. Specifications for test methods. Electrical test methods - Electromagnetic performance | Current |
| BS EN 50289-1-11:2002 | Communication cables. Specifications for test methods. Electrical test methods - Characteristic impedance, input impedance, return loss | Current |
| BS EN 50289-1-10:2002 | Communication cables. Specifications for test methods. Electrical test methods - Crosstalk | Current |
| BS EN 50289-1-8:2001 | Communication cables. Specifications for test methods. Electrical test methods - Attentuation - Sec8 : attentuation | Current |
| BS EN 50289-1-7:2001 | Communication cables. Specifications for test methods. Electrical test methods - Velocity of propagation - sec7 : Velocity of propagation | Current |
| BS EN 50289-1-5:2001 | Communication cables. Specifications for test methods. Electrical test methods - Capacitance - SEC5 : Capacitance | Current |
| BS EN 50289-1-4:2001 | Communication cables. Specifications for test methods. Electrical test methods - Insulation resistance | Current |
| BS EN 50289-1-3:2001 | Communication cables. Specifications for test methods. Electrical test methods - Dielectric strength - Dielectric strength | Current |
| BS EN 50289-1-2:2001 | Communication cables. Specifications for test methods. Electrical test methods - DC resistance - d.c.resistance | Current |
| BS EN 50289-1-1:2001 | Communication cables. Specifications for test methods. Electrical test methods - General requirements - General requirements | Current |
| BS EN 50289-4-9:2001 | Communication cables. Specifications for test methods. Environmental test methods - Pneumatic resistance | Current |
| BS EN 50289-4-6:2001 | Communication cables. Specifications for test methods. Environmental test methods - Temperature cycling | Current |
| BS EN 50289-4-1:2001 | Communication cables. Specifications for test methods. Environmental test methods - General requirements | Current |
| BS EN 50289-4-2:2001 | Communication cables. Specifications for test methods. Environmental test methods - Water penetration | Current |
| BS EN 50289-4-11:2002 | Communication cables. Specifications for test methods. Environmental test methods - A horizontal integrated fire test method | Current |
| BS EN 50289-4-14:2003 | Communication cables. Specifications for test methods. Environmental test methods - Lightning | Current |
| BS EN 50289-3-6:2001 | Communication cables. Specifications for test methods. Mechanical test methods - Impact resistance of the cable | Current |
| BS EN 50289-3-12:2001 | Communication cables. Specifications for test methods. Mechanical test methods - Shot gun damage | Current |
| BS EN 50289-3-17:2002 | Communication cables. Specifications for test methods. Mechanical test methods - Adhesion of dielectric and sheath | Current |
| BS EN 50289-3-2:2001 | Communication cables. Specifications for test methods. Mechanical test methods - Tensile strength and elongation for conductor | Current |
| BS EN 50289-3-13:2003 | Communication cables. Specifications for test methods. Mechanical test methods - Aeolian vibration | Current |
| BS EN 50289-3-15:2003 | Communication cables. Specifications for test methods. Mechanical test methods - Underwater cable resistance to hydrostatic pressure | Current |
| BS EN 50289-3-16:2001 | Communication cables. Specifications for test methods. Mechanical test methods - Cable tensile performance | Current |
| BS EN 50289-3-11:2001 | Communication cables. Specifications for test methods. Mechanical test methods - Cable cut-through resistance | Current |
| BS EN 50289-3-9:2001 | Communication cables. Specifications for test methods. Mechanical test methods - Bending tests | Current |
| BS EN 50289-3-8:2001 | Communication cables. Specifications for test methods. Mechanical test methods - Abrasion resistance of cable sheath markings | Current, Work in Hand |
| BS EN 50289-3-7:2001 | Communication cables. Specifications for test methods. Mechanical test methods - Abrasion resistance of the cable sheath | Current |
| BS EN 50289-3-5:2001 | Communication cables. Specifications for test methods. Mechanical test methods - Crush resistance of the cable | Current |
| BS EN 50289-3-4:2001 | Communication cables. Specifications for test methods. Mechanical test methods - Tensile strength, elongation and shrinkage of insulation and sheath | Current |
| BS EN 50289-3-1:2001 | Communication cables. Specifications for test methods. Mechanical test methods - General requirements - General requirements | Current |
| BS EN 50289-3-10:2004 | Communication cables. Specifications for tests methods - Mechanical test methods. Torsion and twisting | Current |
| BS EN 60966-2-6:2003 | Detail specification for cable assemblies for radio and TV receivers. Frequency range 0 to 3000 MHz, IEC 61169-24 connectors | Withdrawn |
| BS 9220 N004:1971 | Detail specification for circular rigid waveguide tubing. Standard wall thickness. General application category | Current |
| BS 9220 N003:1971 | Detail specification for flat rectangular (8.33:1) rigid waveguide tubing. Standard wall thickness. General application category | Current |
| BS 9220 N002:1971 | Detail specification for medium flat rectangular (4:1) rigid waveguide tubing. Standard wall thickness. General application category | Current |
| BS 9220 N001:1971 | Detail specification for ordinary rectangular (2:1) rigid waveguide tubing. Standard wall thickness. General application category | Current |
| BS 9210 N0004:1981 | Detail specification for radio frequency coaxial connectors (series BNC). Unsealed, soldered, captive contact, 50 ohms. Basic assessment level | Withdrawn |
| BS 9210 N0009-1:1978 | Detail specification for radio frequency connectors (series SMC) - Unsealed, soldered, captive contact, 50 O, screw coupling - Full assessment level | Current |
| BS 9210 N0009-2:1978 | Detail specification for radio frequency connectors (series SMC). Unsealed, soldered, captive contact, 50 ohms, screw coupling - Control drawings. Mating face details and gauge information | Current |
| BS 9210 N001-1:1975 | Detail specification for radio frequency connectors (type BNC). Sealed, soldered, captive contact, 50 ohms - Full assessment level | Current |
| BS 9210 N0003:1976 | Detail specification for radio frequency connectors (type BNC). Unsealed, soldered, captive contact, 50 ohms. Full assessment level | Withdrawn |
| BS 9210 N007-1:1976 | Detail specification for radio frequency connectors (type SMB) - Unsealed, soldered, captive contact, 50 O, snap-on couplings - Full assessment level | Current |
| BS 9210 N007-2:1976 | Detail specification for radio frequency connectors (type SMB). Unsealed, soldered, captive contact, 50 ohms, snap-on couplings - Control drawings. Mating face details and gauge information | Current |
| BS EN 50406-1:2004 | End user multi-pair cables used in high bit rate telecommunication networks - Aerial cables | Current |
| BS EN 50406-2:2004 | End user multi-pair cables used in high bit rate telecommunication networks - Duct and buried cables | Current |
| PD IEC/TR 62222:2005 | Fire performance of communication cables installed in buildings | Withdrawn |
| PD IEC/TR 62222:2012 | Fire performance of communication cables installed in buildings | Current |
| BS EN 60154-1:1996 | Flanges for waveguides - General requirements | Current |
| BS EN 60154-2:1997 | Flanges for waveguides - Relevant specifications for flanges for ordinary rectangular waveguides | Current |
| BS EN 61935-2:2003 | Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with EN 50173 - Patch cords and work area cords | Withdrawn |
| BS 7630:1993 | Generic specification for symmetric pair/quad and multicore cables for digital communication | Withdrawn |
| BS EN 50109-1:1996 | Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - General requirements and tests | Current |
| BS EN 50109-2-2:1995 | Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements for radio frequency connectors and concentric contacts. Open throat tools with removable and interchangeable dies, sizes A to G, Q to T, V and W | Current |
| BS EN 50109-2-1:1996 | Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements - Radio frequency connectors and concentric contacts. Open throat tools with fixed dies, sizes A to E, V and W | Current |
| BS EN 50109-2-3:1996 | Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements - Contacts of electrical connectors | Current |
| BS EN 50109-2-5:1996 | Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements - Termination of twin-ax cable for databus applications | Current |
| BS EN 50109-2-4:1996 | Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements - Centre contacts of RF connectors, series SMZ | Current |
| BS CECC 22000:1993 | Harmonized system of quality assessment for electronic components. Generic specification. Radio frequency coaxial connectors (Parts I, II and III) | Current |
| BS EN 122340:2002 | Harmonized system of quality assessment for electronic components. Sectional specification. Radio frequency coaxial connectors. Series MMCX | Current |
| BS EN 122180:1996 | Harmonized system of quality assessment for electronic components. Sectional specification. Radio frequency coaxial connectors. Series SSMC | Current |
| BS EN 122200:1995 | Harmonized system of quality assessment for electronic components. Sectional specification. Radio frequency coaxial connectors. Series TNC | Current |
| BS EN 122190:1996 | Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series 7-16 | Current |
| BS EN 122120:1996 | Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series BNC | Current |
| BS EN 122150:1996 | Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series EIA Flange | Current |
| BS EN 122110:1994 | Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series SMA | Current |
| BS EN 122130:1994 | Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series SMB | Current |
| BS EN 122160:1996 | Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series SSMA | Current |
| BS CECC 22110:1983 | Harmonized system of quality assessment for electronic components: sectional specification: radio frequency coaxial connectors, series SMA | Current |
| BS 5308-1:1986 | Instrumentation cables. - Specification for polyethylene insulated cables | Withdrawn |
| BS 5308-2:1986 | Instrumentation cables. - Specification for PVC insulated cables | Withdrawn |
| BS EN 60708:2005 | Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath | Current |
| BS 7878-8:1997 | Materials used in communication cables - Filling compounds for filled cables | Withdrawn |
| BS 7878-7:1997 | Materials used in communication cables - Halogen free flame retardant thermoplastic sheathing compounds | Withdrawn |
| BS 7878-6:1997 | Materials used in communication cables - Halogen free flame retardant insulation compounds | Withdrawn |
| BS 7878-5:1997 | Materials used in communication cables - Polypropylene insulation compounds | Withdrawn |
| BS 7878-3:1997 | Materials used in communication cables - PE insulation | Withdrawn |
| BS 7878-2:1997 | Materials used in communication cables - PVC sheathing compounds | Withdrawn |
| BS 7878-1:1997 | Materials used in communication cables - PVC insulation compounds | Withdrawn |
| DD IEC/PAS 62431:2005 | Measurement methods for reflectivity of electromagnetic wave absorbers in millimetre wave frequency | Withdrawn |
| PD IEC/TR 62153-4-1:2010 | Metallic communication cable test methods - Electromagnetic compatibility (EMC). Introduction to electromagnetic (EMC) screening measurements | Current, Work in Hand |
| BS EN 62153-4-2:2004 | Metallic communication cable test methods - Electromagnetic compatibility. Screening and coupling attenuation. Injection clamp method | Current |
| BS EN 62153-4-7:2006 | Metallic communication cables test methods - Electromagnetic compatibility (EMC). Test method for measuring the transfer impedance and the screening, or the coupling attenuation. Tube in tube method | Current, Work in Hand |
| BS EN 62153-1-1:2004 | Metallic communication cables test methods - Electrical. Measurement of the pulse/step return loss in the frequency domain using the inverse discrete fourier transformation (IDFT) | Current |
| BS EN 61580-4:1998 | Methods of measurement for waveguides - Attenuation of waveguide and waveguide assemblies | Current |
| BS EN 61580-6:1997 | Methods of measurement for waveguides - Return loss on waveguide and waveguide assemblies | Current |
| BS EN 61580-1:1997 | Methods of measurement for waveguides - Decoupling and rotation of the plane of polarization | Current |
| BS EN 61580-2:1997 | Methods of measurement for waveguides - Level of intermodulation products | Current |
| BS EN 61580-7:1997 | Methods of measurement for waveguides - Graphical method for the determination of waveguide performance | Current |
| BS EN 61580-8:1997 | Methods of measurement for waveguides - Waveguide power holding capability | Current |
| BS EN 61580-9:1997 | Methods of measurement for waveguides - Reflection coefficient at rectangular waveguide interfaces | Current |
| BS EN 61580-3:1997 | Methods of measurement for waveguides - Variation of group delay | Current |
| PD 6455:1970 | Metric dimensions for l.f. cables and wires for telecommunication | Withdrawn |
| BS EN 50288-1:2001 | Multi-element metallic cables used in analogue and digital communication and control - Generic specification | Withdrawn |
| BS EN 50288-10-1:2012 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 500 MHz. Horizontal floor and building backbone cables | Current |
| BS EN 50288-8:2012 | Multi-element metallic cables used in analogue and digital communication and control - Specification for type 1 cables characterised up to 2 MHz | Current |
| BS EN 50288-7:2005 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for instrumentation and control cables | Current |
| BS EN 50288-9-1:2012 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterised up to 1 000 MHz. Horizontal and building backbone cables | Current |
| BS EN 50288-11-1:2012 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for un-screened cables characterised up to 500 MHz. Horizontal and building backbone cables | Current |
| BS EN 50288-6-1:2003 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables | Current, Work in Hand |
| BS EN 50288-6-2:2003 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables | Current, Work in Hand |
| BS EN 50288-5-2:2003 | Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables | Current, Work in Hand |
| BS EN 50288-1:2003 | Multi-element metallic cables used in analogue and digital communication and control - Generic specification | Current, Work in Hand |
| BS EN 50288-2-1:2003 | Multi-element metallic cables used in analogue and digital communication and control - Horizontal and building backbone cables - Horizontal and building backbone cables | Current, Work in Hand |
| BS EN 50288-5-1:2003 | Multi-element metallic cables used in analogue and digital communication and control. - Sectional specification for screened cables characterized up to 250 MHz. - Horizontal and building backbone cables | Current, Work in Hand |
| BS EN 50288-2-2:2003 | Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 100 MHz - Work area and patch cord cables | Current, Work in Hand |
| BS EN 50288-2-2:2001 | Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 100 MHz - Work area and patch cord cables | Withdrawn |
| BS EN 50288-2-1:2001 | Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 100 MHz - Horizontal and building backbone cables | Withdrawn |
| BS EN 50288-4-2:2001 | Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 600 MHz - Work area and patch cord cables | Withdrawn |
| BS EN 50288-4-1:2001 | Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 600 MHz - Horizontal and building backbone cables | Withdrawn |
| BS EN 50288-4-2:2003 | Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 600 MHz - Work area and patch cord cables | Current, Work in Hand |
| BS EN 50288-4-1:2003 | Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 600 MHz - Horizontal and building backbone cables | Current, Work in Hand |
| BS EN 50288-3-2:2003 | Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for unscreened cables - Work area and patch cord cables | Current, Work in Hand |
| BS EN 50288-3-1:2003 | Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for unscreened cables characterized up to 100 MHz - Horizontal and building backbone cables | Current, Work in Hand |
| BS EN 50288-3-2:2001 | Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for unscreened cables characterized up to 100 MHz - Work area and patch cord cables | Withdrawn |
| BS EN 50288-3-1:2001 | Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for unscreened cables characterized up to 100 MHz - Horizontal and building backbone cables | Withdrawn |
| BS EN 50407-1:2004 | Multi-pair cables used in high bit rate digital access telecommunication networks - Outdoor cables | Current |
| DD IEC PAS 62255-1:2001 | Multi-pair cables used in high bit rate digital access telecommunication networks - Outdoor Cables | Withdrawn |
| DD IEC/PAS 61156-1-4:2010 | Multicore and symmetrical pair/quad cables for digital communications - Symmetrical pair/quad cables with transmission characteristics up to 1000 MHz. Conductor heating of bundled data grade cables for limited power transmission based on IEEE 802.3 | Current |
| PD IEC/TR 61156-1-2:2009 | Multicore and symmetrical pair/quad cables for digital communications - Electrical transmission characteristics and test methods of symmetrical pair/quad cables | Current |
| BS EN 62012-1:2002 | Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Generic specification | Current |
| BS EN 62037-1:2012 | Passive RF and microwave devices, intermodulation level measurement - General requirements and measuring methods | Current |
| BS EN 62037-2:2013 | Passive RF and microwave devices, intermodulation level measurement - Measurement of passive intermodulation in coaxial cable assemblies | Current |
| BS EN 62037-3:2012 | Passive RF and microwave devices, intermodulation level measurement - Measurement of passive intermodulation in coaxial connectors | Current |
| BS EN 62037-4:2012 | Passive RF and microwave devices, intermodulation level measurement - Measurement of passive intermodulation in coaxial cables | Current |
| BS EN 62037-5:2013 | Passive RF and microwave devices, intermodulation level measurement - Measurement of passive intermodulation in filters | Current |
| BS EN 62037-6:2013 | Passive RF and microwave devices, intermodulation level measurement - Measurement of passive intermodulation in antennas | Current |
| DD IEC/PAS 62260:2001 | Pulse/step return loss from measurement in the frequency domain using the inverse discrete fourier transformation (IDFT) | Withdrawn |
| BS EN 60966-3:2003 | Radio frequency and coaxial cable assemblies - Sectional specification for semi-flexible coaxial cable assemblies | Withdrawn |
| BS EN 60966-4:2003 | Radio frequency and coaxial cable assemblies - Sectional specification for semi-rigid coaxial cable assemblies | Current |
| BS EN 60966-2-4:2009 | Radio frequency and coaxial cable assemblies - Detail specification for cable assemblies for radio and TV receivers. Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors | Current |
| BS EN 60966-2-5:2009 | Radio frequency and coaxial cable assemblies - Detail specification for cable assemblies for radio and TV receivers. Frequency range 0 MHz to 1000 MHz, IEC 61169-2 connectors | Current |
| BS EN 60966-2-6:2009 | Radio frequency and coaxial cable assemblies - Detail specification for cable assemblies for radio and TV receivers. Frequency range 0 MHz to 3000 MHz, IEC 61169-24 connectors | Current |
| BS EN 60966-2-1:2009 | Radio frequency and coaxial cable assemblies - Sectional specification for flexible coaxial cable assemblies | Current |
| BS EN 60966-2-3:2009 | Radio frequency and coaxial cable assemblies - Detail specification for flexible coaxial cable assemblies. Frequency range 0 MHz to 1000 MHz, IEC 61169-8 connectors | Current |
| BS EN 60966-3:2009 | Radio frequency and coaxial cable assemblies - Sectional specification for semi-flexible coaxial cable assemblies | Current |
| BS EN 60966-3-1:2009 | Radio frequency and coaxial cable assemblies - Blank detail specification for semi-flexible coaxial cable assemblies | Current |
| BS EN 60966-1:1999 | Radio frequency and coaxial cable assemblies - Generic specification. General requirements and test methods | Current |
| BS EN 60966-4:1996 | Radio frequency and coaxial cable assemblies - Sectional specification for semi-rigid coaxial cable assemblies | Withdrawn |
| BS EN 60966-1:1993 | Radio frequency and coaxial cable assemblies - General requirements and test methods | Withdrawn |
| BS EN 60966-3:1996 | Radio frequency and coaxial cable assemblies - Sectional specification for semi-flexible coaxial cable assemblies | Withdrawn |
| BS EN 60966-3-1:1996 | Radio frequency and coaxial cable assemblies. - Blank detail specification for semi-flexible coaxial cable assemblies | Withdrawn |
| BS EN 60966-4-1:1996 | Radio frequency and coaxial cable assemblies. - Blank detail specification for semi-rigid coaxial cable assemblies | Withdrawn |
| BS EN 60966-2-2:1996 | Radio frequency and coaxial cable assemblies. - Blank detail specification for flexible coaxial cable assemblies | Withdrawn |
| BS EN 60966-2-1:1996 | Radio frequency and coaxial cable assemblies. - Sectional specification for flexible coaxial cable assemblies | Withdrawn |
| BS EN 60966-3-2:1999 | Radio frequency and coaxial cable assemblies. - Detail specification for flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz) | Withdrawn |
| BS EN 60966-2-3:1999 | Radio frequency and coaxial cable assemblies. - Detail specification for flexible coaxial cable assemblies | Withdrawn |
| BS EN 60966-4-1:2003 | Radio frequency and coaxial cable assemblies. - Blank detail specification for semi-rigid coaxial cable assemblies | Current |
| BS EN 60966-3-1:2003 | Radio frequency and coaxial cable assemblies. - Blank detail specification for semi-flexible coaxial cable assemblies | Withdrawn |
| BS EN 60966-3-2:2003 | Radio frequency and coaxial cable assemblies. - Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz) | Current |
| BS EN 60966-2-1:2003 | Radio frequency and coaxial cable assemblies. - Sectional specification for flexible coaxial cable assemblies | Withdrawn |
| BS EN 60966-2-2:2003 | Radio frequency and coaxial cable assemblies. - Blank detail specification for flexible coaxial cable assemblies | Current |
| BS EN 60966-2-3:2003 | Radio frequency and coaxial cable assemblies. - Detail specification for flexible coaxial cable assemblies | Withdrawn |
| BS EN 60966-2-4:2003 | Radio frequency and coaxial cable assemblies. - Detail specification for cable assemblies for radio and TV receivers Frequency range 0 to 3000 MHz, IEC 61169-2 connectors | Withdrawn |
| BS EN 60966-2-5:2003 | Radio frequency and coaxial cable assemblies. - Detail specification for cable assemblies for radio and TV receivers. Frequency range 0 to 1000 MHz, IEC 61169-2 connectors | Withdrawn |
| BS EN 61196-2:2003 | Radio-frequency cables. Specifications. - Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation | Current, Work in Hand |
| BS EN 61196-3:1999 | Radio-frequency cables. Specifications. - Sectional specification for coaxial cables for local area networks | Current |
| BS EN 61196-2:1997 | Radio-frequency cables. Specifications. - Semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation. Sectional specification | Withdrawn |
| BS EN 61196-3-3:1998 | Radio-frequency cables. Specifications. Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s | Current |
| BS EN 61196-3-2:1998 | Radio-frequency cables. Specifications. Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s | Current |
| BS EN 61169-1:1996 | Radio-frequency connectors - Generic specification. General requirements and measuring methods | Current, Work in Hand |
| BS EN 61169-36:1997 | Radio-frequency connectors - Microminiature r.f. coaxial connectors with snap-on coupling. Characteristic impedance 50 ohms (type MCX) | Current |
| BS EN 61169-33:1997 | Radio-frequency connectors - Sectional specification for series BMA r.f. connectors | Current |
| BS EN 60169-21:1997 | Radio-frequency connectors - Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with different versions of screw coupling. Characteristic impedance 50 ohms (types SC-A and SC-B) | Current |
| BS EN 61169-32:2000 | Radio-frequency connectors - RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with screw coupling. Characteristic impedance 50 ohms (type 1,85) | Current |
| BS EN 61169-31:2000 | Radio-frequency connectors - RF coaxial connectors with inner diameter of outer conductor 1,0 mm (0,039 in) with screw coupling. Characteristic impedance 50 ohms (type 1,0) | Current |
| BS EN 61169-2:2002 | Radio-frequency connectors - Sectional specification. Radio frequency coaxial connectors of type 9,52 | Withdrawn |
| BS EN 61169-24:2002 | Radio-frequency connectors - Sectional specification. Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F) | Withdrawn |
| BS 3041-7:1996 | Radio-frequency connectors - R.F. coaxial connectors with inner diameter of output conductor 9,5 mm (0,374 in) with bayonet lock. Characteristic impedance 50 ohms (Type C) | Current |
| BS EN 61169-2:2007 | Radio-frequency connectors - Sectional specification. Radio frequency coaxial connectors of type 9,52 | Current |
| BS EN 61169-37:2007 | Radio-frequency connectors - Sectional specification for STWX8 R.F connectors | Current |
| BS EN 61169-29:2005 | Radio-frequency connectors - Sectional specification. Miniature radio frequency coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel applications). Characterisctic impedance 50 ohms (type 1,0/2,3). 50 ohms and 75 ohms applications | Current |
| BS EN 61169-39:2011 | Radio-frequency connectors - Sectional specification for CQM series quick lock RF connectors | Current |
| DD IEC/PAS 61169-39:2008 | Radio-frequency connectors - Sectional specification for CQM series quick lock RF connectors | Withdrawn |
| DD IEC/PAS 61169-40:2008 | Radio-frequency connectors - Sectional specification for 2.4 series R.F connectors | Withdrawn |
| BS EN 61169-40:2011 | Radio-frequency connectors - Sectional specification for 2.4 series RF connectors | Current |
| DD IEC/PAS 61169-18:2009 | Radio-frequency connectors - Sectional specification. Radio frequency coaxial connectors of type SSMA | Withdrawn |
| BS EN 61169-18:2011 | Radio-frequency connectors - Sectional specification. Radio frequency coaxial connectors of type SSMA | Current |
| DD IEC/PAS 61169-19:2009 | Radio-frequency connectors - Sectional specification for SSMB series R.F. coaxial connectors | Withdrawn |
| BS EN 61169-19:2011 | Radio-frequency connectors - Sectional specification. Radio frequency coaxial connectors of type SSMB | Current |
| DD IEC/PAS 61169-35:2009 | Radio-frequency connectors - Sectional specification. Radio frequency coaxial connectors of type 2,92 | Withdrawn |
| BS EN 61169-35:2011 | Radio-frequency connectors - Sectional specification for 2,92 series RF connectors | Current |
| DD IEC/PAS 61169-41:2009 | Radio-frequency connectors - Sectional specification for CQA series quick lock R.F. coaxial connectors | Withdrawn |
| BS EN 61169-41:2011 | Radio-frequency connectors - Sectional specification for CQA series quick lock R.F. coaxial connectors | Current |
| BS EN 61169-14:2010 | Radio-frequency connectors - R.F. coaxial connectors with inner diameter of outer conductor 12 mm with screw coupling. Characteristic impedance 75 ohms (Type 3,5/12) | Current |
| DD IEC/PAS 61169-44:2010 | Radio-frequency connectors - Sectional specification for series SMP push-on radio-frequency coaxial connectors | Current, Work in Hand |
| BS EN 61169-47:2012 | Radio-frequency connectors - Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 ? cable networks (type F-Quick) | Current |
| DD IEC/PAS 61169-4:2006 | Radio-frequency connectors - Sectional specification. Radio-frequency coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock. Characteristic impedance 50 O (type 7-16) | Current |
| BS EN 61169-8:2007 | Radio-frequency connectors - Sectional specification. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock. Characteristic impedance 50 ohms (type BNC) | Current |
| BS EN 61169-16:2007 | Radio-frequency connectors - Sectional specification. RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling. Characteristic impedance 50 ohms (75 ohms) (type N) | Current |
| BS EN 61169-24:2009 | Radio-frequency connectors - Sectional specification. Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable networks (type F) | Current |
| BS EN 61169-38:2009 | Radio-frequency connectors - Sectional specification. Radio frequency coaxial connectors model, slide-in (rack and panel applications). Characteristic impedance 50 ohms (type TMA). 50 ohms applications | Current |
| BS EN 60169-23:1994 | Radio-frequency connectors. - Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in) | Current |
| BS EN 60169-24:1994 | Radio-frequency connectors. - Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F) | Current |
| BS EN 60169-25:1994 | Radio-frequency connectors. - Two-pole screw (¾-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (Type TWHN) | Current |
| BS 3041-1:1977 | Radio-frequency connectors. - Specification for general requirements and measuring methods | Withdrawn |
| BS 3041-2:1977 | Radio-frequency connectors. - Specification for coaxial unmatched connector | Withdrawn |
| BS 3041-12:1981 | Radio-frequency connectors. - Specification for r.f. coaxial connectors with screw coupling, unmatched (type UHF) | Current |
| BS EN 61169-1-1:1997 | Radio-frequency connectors. - Single, multi-series, dual-language blank detail specification | Current |
| BS QC 221400:1997 | Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with screw coupling. Characteristic impedance 50 ohms (Type SMC) | Current |
| BS QC 221300:1997 | Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling. Characteristic impedance 50 ohms (Type SMB) | Current |
| BS QC 221100:1997 | Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 4,13 mm (0,163 in) with screw coupling. Characteristic impedance 50 ohms (Type SMA) | Current |
| BS QC 222400:1997 | Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 5,6 mm (0,22 in). Characteristic impedance 75 ohms (type 1,6/5,6). Characteristic impedance 50 ohms (type 1,8/5,6) with similar mating dimensions | Current |
| BS QC 221200:1997 | Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock. Characteristic impedance 50 ohms (Type BNC) | Withdrawn |
| BS QC 222000:1996 | Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with screw coupling. Characteristic impedance 50 ohms. (Type TNC) | Current |
| BS QC 222100:1997 | Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling. Characteristic impedance 50 ohms (75 ohms) (Type N) | Withdrawn |
| BS EN 62431:2008 | Reflectivity of electromagnetic wave absorbers in millimetre wave frequency. Measurement methods | Current |
| BS EN 62037:2000 | RF connectors, connector cable assemblies and cables. Intermodulation level measurement | Withdrawn |
| DD IEC/PAS 62338:2002 | Screened balanced cables. Coupling attenuation measurement, triaxial method | Current, Work in Hand |
| BS EN 50169:1996 | Sectional specification for backbone cables, riser and campus, with a common overall screen for use in digital communication | Withdrawn |
| BS 7879:1997 | Sectional specification for equipment cables to be used for digital and analogue communications | Withdrawn |
| BS EN 50167:1996 | Sectional specification for horizontal floor wiring cables with a common overall screen for use in digital communication | Withdrawn |
| BS EN 50168:1996 | Sectional specification for work area wiring cables with a common overall screen for use in digital communication | Withdrawn |
| BS IEC 60748-23-4:2002 | Semiconductor devices. Integrated circuits. Hybrid integrated circuits and film structures. Manufacturing line certification - Blank detail specification | Current |
| BS EN 122003:1995 | Specification for harmonized system of quality assessment for electronic components. Blank detail specification for the preparation of customer detail specifications (CDS) and detail specifications for standard production items with capability approval | Current |
| BS CECC 22111:1983 | Specification for harmonized system of quality assessment for electronic components. Blank detail specification: radio frequency coaxial connections, series SMA | Current |
| BS EN 122002:1995 | Specification for harmonized system of quality assessment for electronic components. Blank detail specification: radio frequency coaxial connectors | Current |
| BS CECC 22121:1981 | Specification for harmonized system of quality assessment for electronic components. Blank detail specification: radio frequency coaxial connectors, series BNC | Current |
| BS EN 122001:1995 | Specification for harmonized system of quality assessment for electronic components. Blank detail specification: radio frequency connectors (Type MIL-C-39012) | Current |
| BS 7587:1992 | Specification for interconnection of radio and TV receivers to feeder system outlets | Current |
| BS 4808-1:1972 | Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication. - General requirements and tests | Obsolescent |
| BS 4808-2:1972 | Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication. - Equipment wires with solid or stranded conductors, unscreened, single | Obsolescent |
| BS 4808-3:1972 | Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication. - Cables and equipment wires, with solid or stranded conductors, screened, single | Withdrawn |
| BS 4808-4:1974 | Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication. - Equipment wires with solid or stranded conductors, unscreened, in pairs, triples, quads and quintuples | Withdrawn |
| BS 4808-5:1973 | Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication. - Cables with solid or stranded conductors, screened and sheathed, one pair | Withdrawn |
| BS 6156:1981 | Specification for low-frequency miniature equipment wires with solid or stranded conductor, fluorinated polyhydrocarbon type insulation, single | Withdrawn |
| BS 3573:1990 | Specification for polyolefin copper-conductor telecommunication cables | Withdrawn |
| BS 9210:1984 | Specification for radio frequency connectors of assessed quality: generic data and methods of test | Current |
| BS 2316:Parts 1 and 2:1968 | Specification for radio-frequency cables - General requirements and tests. British Government Services requirements | Withdrawn |
| BS 9220:1971 | Specification for rigid waveguide tubing of assessed quality: generic data and methods of test | Current |
| BS EN 61935-1:2009 | Specification for the testing of balanced and coaxial information technology cabling - Installed balanced cabling as specified in the standards series EN 50173 | Current, Work in Hand |
| BS EN 61935-2:2010 | Specification for the testing of balanced and coaxial information technology cabling - Cords as specified in ISO/IEC 11801 and related standards | Current |
| BS 5310-1:1976 | Specification. Hand crimping tools for the termination of electrical cables and wires for low frequency and radio frequency applications - General requirements and tests | Withdrawn |
| BS 5310-2A:1976 | Specification. Hand crimping tools for the termination of electrical cables and wires for low frequency and radio frequency applications - Hand crimping tools (fixed die, sizes A to E) for radio frequency connectors and concentric contacts | Withdrawn |
| BS 5310-2B:1981 | Specification. Hand crimping tools for the termination of electrical cables and wires for low frequency and radio frequency applications - Hand crimping tools (removable and interchangeable dies, sizes A to G and Q to S) for radio frequency connectors and concentric contacts | Withdrawn |
| BS CECC 299001:1999 | Technology approval schedule. Manufacture of electrical connectors | Current |
| BS EN 61935-3:2009 | Testing of balanced and coaxial information technology cabling - Installed cabling as specified in EN 50173-4 and related standards | Current |
| BS EN 61935-2-20:2009 | Testing of balanced communication cabling in accordance with series EN 50173 - Patch cords and work area cords. Blank detail specification for class D applications | Current |
| BS EN 61935-1:2005 | Testing of balanced communication cabling in accordance with standards series EN 50173 - Installed cabling | Withdrawn |
| BS EN 61935-2:2005 | Testing of balanced communication cabling in accordance with standards series EN 50173 - Patch cords and work area cords | Withdrawn |
| PD IEC/TR 62152:2009 | Transmission properties of cascaded two-ports or quadripols. Background of terms and definitions | Current |
