| BS 2782-9 Met 902A:1992 | BS 2782-9 Met 902A:1992 | | |
| BS 7008-2:1988 | Acquisition and presentation of comparable data for basic properties of plastics - Method for multipoint data | Withdrawn |
| DD ENV 1122:1995 | Determination of cadmium in plastics with the method of the wet decomposition | Withdrawn |
| BS EN ISO 2039-2:2000 | Determination of Rockwell hardness. Rockwell hardness - Rockwell hardness | Current |
| BS EN ISO 14855:2004 | Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions. Method by analysis of evolved carbon dioxide | Withdrawn |
| BS EN ISO 14852:2004 | Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by analysis of evolved carbon dioxide | Current |
| BS EN ISO 14851:2004 | Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by measuring the oxygen demand in a closed respirometer | Current |
| BS EN ISO 14855-2:2009 | Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions. Method by analysis of evolved carbon dioxide - Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test | Current |
| BS EN ISO 14855-1:2007 | Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions. Method by analysis of evolved carbon dioxide - General method | Withdrawn |
| BS EN ISO 14855-1:2012 | Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions. Method by analysis of evolved carbon dioxide - General method | Current |
| BS ISO 22196:2011 | Measurement of antibacterial activity on plastics and other non-porous surfaces | Current |
| BS 2782-0:2011 | Methods of testing plastic - Introduction | Current |
| BS 2782-3:Method 323B:1996 | Methods of testing plastics - Mechanical properties - Flexural vibration. Non-resonance method | Current |
| BS 2782-3:Method 323C:1996 | Methods of testing plastics - Mechanical properties - Shear vibration. Non-resonance method | Current |
| BS 2782-3:Method 323D:1996 | Methods of testing plastics - Mechanical properties - Torsional vibration. Non-resonance method | Current |
| BS 2782-0:2004 | Methods of testing plastics - Introduction | Withdrawn |
| BS 2782-0:1992 | Methods of testing plastics - Introduction | Withdrawn |
| BS 2782-0:1995 | Methods of testing plastics - Introduction | Withdrawn |
| BS 2782-540G:1995 | Methods of testing plastics - Optical and colour properties, weathering - | | |
| BS 2782-4 Method 454E:1992 | Methods of testing plastics. Chemical properties - Determination of plasticizer absorption at room temperature of PVC resins for general use | Withdrawn |
| BS 2782-4:Method 452B:1993 | Methods of testing plastics. Chemical properties - Determination of carbon black content of polyolefin compound | Current |
| BS 2782-4:Method 432A:1991 | Methods of testing plastics. Chemical properties - Determination of residual styrene monomer content in reinforced plastics based on unsaturated polyester resins | Withdrawn |
| BS 2782-4 Method 470A:1991 | Methods of testing plastics. Chemical properties - Determination of ash (general methods) | Withdrawn |
| BS 2782-4 Method 470B:1991 | Methods of testing plastics. Chemical properties - Determination of ash of polyalkylene terephthalates | Withdrawn |
| BS 2782-4:Method 470C:1991 | Methods of testing plastics. Chemical properties - Determination of ash of unplasticized cellulose acetate | Current |
| BS 2782-4:Method 453C:1996 | Methods of testing plastics. Chemical properties - Determination of residual acrylonitrile monomer content in styrene/acrylonitrile copolymers using gas chromatography | Current |
| BS 2782-4:Method 454G:1996 | Methods of testing plastics. Chemical properties - Polymer dispersions. Determination of sieve residue (gross particle and coagulum content) | Current |
| BS 2782-4 Methods 430A to 430D:1983 | Methods of testing plastics. Chemical properties - Determination of water absorption at 23°C with allowance for water-soluble matter | Withdrawn |
| BS 2782-4 Method 433B:1979 | Methods of testing plastics. Chemical properties - Determination of easily saponifiable chlorine in epoxide resins and related materials | Withdrawn |
| BS 2782-4:Methods 433C and 433D:1979 | Methods of testing plastics. Chemical properties - Determination of epoxide equivalent of epoxide compounds | Withdrawn |
| BS 2782-4 Method 434A:1975 | Methods of testing plastics. Chemical properties - The identification of antioxidants and ultra-violet absorbers in polyolefin compounds by thin layer chromatography | Withdrawn |
| BS 2782-4:Method 434B:1977 | Methods of testing plastics. Chemical properties - Determination of antioxidants in polyolefin compounds by ultra-violet absorption of the chloroform extract | Obsolescent |
| BS 2782-4 Method 434C:1977 | Methods of testing plastics. Chemical properties - Determination of antioxidants in polyolefin compounds by ultra-violet absorption of the toluene/ethanol extract in ethanol solution | Withdrawn |
| BS 2782-4:Method 434D:1975 | Methods of testing plastics. Chemical properties - Determination of antioxidants in polyolefin compounds by a spectrophotometric method | Current |
| BS 2782-4:Method 451A:1978 | Methods of testing plastics. Chemical properties - Determination of acetone-soluble matter in phenolic mouldings | Current |
| BS 2782-4:Method 451B:1978 | Methods of testing plastics. Chemical properties - Determination of acetone-soluble matter in phenolic moulding materials after moulding | Obsolescent |
| BS 2782-4 Method 451C:1978 | Methods of testing plastics. Chemical properties - Determination of acetone-soluble matter (resin content of the material in the unmoulded state) of phenolic moulding materials | Withdrawn |
| BS 2782-4:Methods 451F to 451J:1978 | Methods of testing plastics. Chemical properties - Determination of formaldehyde in phenolic mouldings (colorimetric method). Determination of formaldehyde in phenolic mouldings (gravimetric method). Determination of sulphates in phenolic mouldings. Determination of chlorides in phenolic mouldings | Current |
| BS 2782-4 Method 451K:1978 | Methods of testing plastics. Chemical properties - Determination of pH of water extract of phenolic mouldings | Withdrawn |
| BS 2782-4:Method 452C:1979 | Methods of testing plastics. Chemical properties - Determination of butyl rubber content of low density polyethylene compounds | Obsolescent |
| BS 2782-4:Methods 452D to 452F:1978 | Methods of testing plastics. Chemical properties - Determination of pH of water extract of polyolefin compound. Determination of water-soluble sulphates in polyolefin compound. Determination of water-soluble chlorides in polyolefin compound | Current |
| BS 2782-4:Method 453A:1978 | Methods of testing plastics. Chemical properties - Determination of residual styrene monomer in polystyrene by gas chromatography | Withdrawn |
| BS 2782-4 Method 454C:1978 | Methods of testing plastics. Chemical properties - Determination of pH of aqueous extract of PVC resins | Withdrawn |
| BS 2782-4:Method 454D:1978 | Methods of testing plastics. Chemical properties - Determination of volatile matter (including water) of PVC resins | Withdrawn |
| BS 2782-4 Method 454F:1978 | Methods of testing plastics. Chemical properties - Sieve analysis of vinyl chloride homopolymer and copolymer resins using air-jet sieve apparatus | Withdrawn |
| BS 2782-4 Method 432B:1976 | Methods of testing plastics. Chemical properties - Determination of the acid value of unsaturated polyester resins | Withdrawn |
| BS 2782-4 Method 432C:1978 | Methods of testing plastics. Chemical properties - Determination of hydroxyl value of unsaturated polyester resins | Withdrawn |
| BS 2782-4:Method 433A:1979 | Methods of testing plastics. Chemical properties - Determination of inorganic chlorine in epoxide resins and glycidyl esters | Current |
| BS 2782-4:Method 470B:1999 | Methods of testing plastics. Chemical properties - Determination of ash of polyalkylene terephthalates | Current |
| BS 2782-6:Methods 620A to 620D:1991 | Methods of testing plastics. Dimensional properties - Determination of density and relative density of non-cellular plastics - Methods 620A to 620D:Determination of density and relative density of non-cellular plastics | Current |
| BS 2782-6 Method 620E:1980 | Methods of testing plastics. Dimensional properties - Determination of density of liquid resins by the pyknometer method | Withdrawn |
| BS 2782-6:Method 621C:1983 | Methods of testing plastics. Dimensional properties - Determination of the bulk factor of moulding materials | Current |
| BS 2782-6:Method 621D:1978 | Methods of testing plastics. Dimensional properties - Determination of compacted apparent bulk density of PVC resins | Current |
| BS 2782-6 Method 644A:1979 | Methods of testing plastics. Dimensional properties - Determination of total volume shrinkage of polyester and epoxide casting resins | Withdrawn |
| BS 2782-6:Method 640A:1979 | Methods of testing plastics. Dimensional properties. - Determination of shrinkage of test specimens in the form of bars of compression moulded thermosetting moulding materials | Current, Work in Hand |
| BS 2782-2:Method 241A:1984 | Methods of testing plastics. Electrical properties. - Determination of effect of polyvinyl chloride compound on the loss tangent of polyethylene | Withdrawn |
| BS 2782-10:Method 1001:1977 | Methods of testing plastics. Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor | Current |
| BS 2782-10:Method 1002:1977 | Methods of testing plastics. Glass reinforced plastics - Determination of loss on ignition | Current |
| BS 2782-10:Method 1003:1977 | Methods of testing plastics. Glass reinforced plastics - Determination of tensile properties | Current |
| BS 2782-10:Method 1004:1977 | Methods of testing plastics. Glass reinforced plastics - Standard atmospheres for conditioning and testing | Current |
| BS 2782-10:Method 1005:1977 | Methods of testing plastics. Glass reinforced plastics - Determination of flexural properties. Three point method | Current |
| BS 2782-3:Methods 340A and 340B:1978 | Methods of testing plastics. Mechanical properties - Determination of shear strength of moulding material. Determination of shear strength of sheet material | Withdrawn |
| BS 2782-3:Method 346A:1984 | Methods of testing plastics. Mechanical properties - Determination of cohesion between layers of laminated tube | Withdrawn |
| BS 2782-3 Method 370:1990 | Methods of testing plastics. Mechanical properties - Determination of resistance to wear by abrasive wheels | Withdrawn |
| BS 2782-3:Methods 320A to 320F:1976 | Methods of testing plastics. Mechanical properties - Tensile strength, elongation and elastic modulus | Withdrawn |
| BS 2782-3 Methods 326A to 326C:1977 | Methods of testing plastics. Mechanical properties - Determination of tensile strength and elongation of plastics films | Withdrawn |
| BS 2782-3:Method 332A:1976 | Methods of testing plastics. Mechanical properties - Stiffness of plastics film | Obsolescent |
| BS 2782-3:Method 341A:1977 | Methods of testing plastics. Mechanical properties - Determination of apparent interlaminar shear strength of reinforced plastics | Withdrawn |
| BS 2782-3 Method 352D:1979 | Methods of testing plastics. Mechanical properties - Determination of falling weight impact resistance of thin flexible sheet (film) | Withdrawn |
| BS 2782-3:Method 365A:1976 | Methods of testing plastics. Mechanical properties - Determination of softness number of flexible plastics materials | Withdrawn |
| BS 2782-3:Method 323A:1996 | Methods of testing plastics. Mechanical properties - Tensile vibration. Non-resonance method | Withdrawn |
| BS 2782-3:Method 370:1996 | Methods of testing plastics. Mechanical properties - Determination of resistance to wear by abrasive wheels | Withdrawn |
| BS 2782-3 Method 365D:1991 | Methods of testing plastics. Mechanical properties - Determination of hardness by the ball indentation method | Withdrawn |
| BS 2782-3:Method 323E:1997 | Methods of testing plastics. Mechanical properties - Longitudinal and shear vibration. Wave-propagation method | Current |
| BS 2782-3:Method 323G:1997 | Methods of testing plastics. Mechanical properties - Complex shear viscosity using a parallel-plate oscillatory rheometer | Withdrawn |
| BS 2782-5:Method 552A:1999 | Methods of testing plastics. Optical and colour properties, weathering - Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources | Current |
| BS 2782-5:Method 520A:1992 | Methods of testing plastics. Optical and colour properties, weathering - Determination of specular gloss | Current |
| BS 2782-5:Method 521A:1992 | Methods of testing plastics. Optical and colour properties, weathering - Determination of haze of film and sheet | Current |
| BS 2782-5:Method 531A:1992 | Methods of testing plastics. Optical and colour properties, weathering - Determination of refractive index of transparent plastics | Withdrawn |
| BS 2782-5:Method 540G:1995 | Methods of testing plastics. Optical and colour properties, weathering - Methods of exposure to laboratory light sources. Open flame carbon-arc lamps | Current, Work in Hand |
| BS 2782-5:Method 540D:1995 | Methods of testing plastics. Optical and colour properties, weathering - Methods of exposure to laboratory light sources. General guidance | Withdrawn |
| BS 2782-5:Methods 530A and 530B:1976 | Methods of testing plastics. Optical and colour properties, weathering - Determination of yellowness index. Determination of the colour of near-white or near-colourless materials | Obsolescent |
| BS 2782-5 Method 552A:1981 | Methods of testing plastics. Optical and colour properties, weathering - Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or artificial light | Withdrawn |
| BS 2782-5 Method 540A:1977 | Methods of testing plastics. Optical and colour properties, weathering - Determination of resistance to change upon exposure under glass to daylight | Withdrawn |
| BS 2782-5:Method 540B:1982 | Methods of testing plastics. Optical and colour properties, weathering - Methods of exposure to laboratory light sources, (xenon arc lamp, enclosed carbon arc lamp, open-flame carbon arc lamp, fluorescent tube lamps) | Obsolescent |
| BS 2782-5 Method 550A:1981 | Methods of testing plastics. Optical and colour properties, weathering - Methods of exposure to natural weathering | Withdrawn |
| BS 2782-5:Method 540C:1988 | Methods of testing plastics. Optical and colour properties, weathering. - Determination of ultraviolet radiation intensity using polysulphone film | Obsolescent |
| BS 2782-8:Methods 823A and 823B:1978 | Methods of testing plastics. Other properties - Methods for the assessment of carbon black dispersion in polyethylene using a microscope | Current |
| BS 2782-8:Method 835C:1980 | Methods of testing plastics. Other properties - Determination of gelation time of polyester and epoxide resins using a gel timer | Withdrawn |
| BS 2782-8:Method 835A:1980 | Methods of testing plastics. Other properties - Determination of gelation time of phenolic resins | Current |
| BS 2782-8:Method 822A:1992 | Methods of testing plastics. Other properties - Determination of water vapour transmission rate of plastics films (sachet method) | Current |
| BS 2782-8 Method 820A:1992 | Methods of testing plastics. Other properties - Determination of water vapour transmission rate (dish method) | Withdrawn |
| BS 2782-8 Method 830A:1986 | Methods of testing plastics. Other properties - Determination of the effects of liquid chemicals, including water | Withdrawn |
| BS 2782-8:Method 835B:1980 | Methods of testing plastics. Other properties. - Determination of gelation time of polyester resins (manual method) | Current |
| BS 2782-8:Method 835D:1980 | Methods of testing plastics. Other properties. - Determination of gelation time of thermosetting resins using a hot plate | Current |
| BS 2782-7:Method 721A:1988 | Methods of testing plastics. Rheological properties - Determination of resin flow from resin impregnated glass fabric | Current |
| BS 2782-7 Method 720A:1979 | Methods of testing plastics. Rheological properties - Determination of melt flow rate of thermoplastics | Withdrawn |
| BS 2782-7:Method 720B:1979 | Methods of testing plastics. Rheological properties - Cup flow of phenolic and alkyd moulding materials | Current |
| BS 2782-7 Method 732A:1991 | Methods of testing plastics. Rheological properties - Determination of viscosity number:general conditions | Withdrawn |
| BS 2782-7:Method 732B:1991 | Methods of testing plastics. Rheological properties - Determination of viscosity number of poly(vinyl chloride) resins | Withdrawn |
| BS 2782-7 Method 732E:1991 | Methods of testing plastics. Rheological properties - Determination of viscosity number of poly(alkylene terephthalates) | Withdrawn |
| BS 2782-7 Method 732D:1991 | Methods of testing plastics. Rheological properties - Determination of viscosity number of polycarbonate moulding and extrusion materials | Withdrawn |
| BS 2782-7:Method 740B:1996 | Methods of testing plastics. Rheological properties - Polymer dispersions and synthetic rubber latices. Freeze-thaw cycle stability test | Current |
| BS 2782-7:Method 740C:1996 | Methods of testing plastics. Rheological properties - Polymer dispersions. Determination of white point temperature and minimum film-forming temperature | Current |
| BS 2782-7 Method 733A:1991 | Methods of testing plastics. Rheological properties - Determination of viscosity number of polyamides | Withdrawn |
| BS 2782-7:Method 722B:1996 | Methods of testing plastics. Rheological properties - Determination of the fluidity of plastics using capillary and slit-die rheometers | Withdrawn |
| BS 2782-7:Method 732D:1999 | Methods of testing plastics. Rheological properties - Determination of the viscosity of polycarbonate (PC) moulding and extrusion materials in dilute solution using capillary viscometers - Method 732D: Determination of the viscosity of polycarbonate (PC) moulding and extrusion materials in dilute solution using capillary viscometers | Current |
| BS 2782-9 Method 910A:1996 | Methods of testing plastics. Sampling and test specimen preparation - Injection moulding test specimens of thermoplastic materials | Withdrawn |
| BS 2782-9 Method 941:1990 | Methods of testing plastics. Sampling and test specimen preparation - Determination of maximum reversion of amorphous thermoplastics moulding materials | Withdrawn |
| BS 2782-9:Method 940B:1989 | Methods of testing plastics. Sampling and test specimen preparation - Preparation of test specimens of amorphous thermoplastics with a specified reversion by injection moulding rectangular plates | Current |
| BS 2782-9:Method 940A:1990 | Methods of testing plastics. Sampling and test specimen preparation - Preparation of test specimens of amorphous thermoplastics in the form of bars with a specified reversion | Withdrawn |
| BS 2782-9 Method 910A:1977 | Methods of testing plastics. Sampling and test specimen preparation - Injection moulding test specimens of thermoplastic materials | Withdrawn |
| BS 2782-9:Methods 920A to 920C:1977 | Methods of testing plastics. Sampling and test specimen preparation - Preparation of glass fibre reinforced, resin bonded, low-pressure laminated plates or panels for test purposes | Withdrawn |
| BS 2782-9 Method 930A:1977 | Methods of testing plastics. Sampling and test specimen preparation - Preparation of test specimens by machining | Withdrawn |
| BS 2782-1:Method 120C:1990 | Methods of testing plastics. Thermal properties - Determination of the 1/10 Vicat softening temperature of thermoplastics | Withdrawn |
| BS 2782-1:Methods 120A; 120B [...]:1990 | Methods of testing plastics. Thermal properties - Determination of Vicat softening temperature of thermoplastics | Withdrawn |
| BS 2782-1:Methods 143A and 143B:1989 | Methods of testing plastics. Thermal properties - Determination of flammability temperature of materials | Withdrawn |
| BS 2782-1 Method 141:1986 | Methods of testing plastics. Thermal properties - Determination of flammability by oxygen index | Withdrawn |
| BS 2782-1 Method 140D:1980 | Methods of testing plastics. Thermal properties - Flammability of a test piece 550 mm x 35 mm of thin polyvinyl chloride sheeting (laboratory method) | Withdrawn |
| BS 2782-1:Method 150B:1976 | Methods of testing plastics. Thermal properties - Determination of cold flex temperature of flexible polyvinyl compound | Withdrawn |
| BS 2782-1 Method 122A:1976 | Methods of testing plastics. Thermal properties - Determination of deformation under heat of flexible polyvinyl chloride compound | Withdrawn |
| BS 2782-1 Method 123A:1976 | Methods of testing plastics. Thermal properties - Determination of the melting point of synthetic resins (capillary tube method) | Withdrawn |
| BS 2782-1 Method 123B:1976 | Methods of testing plastics. Thermal properties - Determination of the melting point of polyamides | Withdrawn |
| BS 2782-1 Method 132B:1976 | Methods of testing plastics. Thermal properties - Determination of the blister temperature of thermosetting materials | Withdrawn |
| BS 2782-1:Method 153B:1991 | Methods of testing plastics. Thermal properties - Determination of stiffness in torsion of flexible materials (method for vinyl chloride compounds) | Current |
| BS 2782-1:Method 153A:1991 | Methods of testing plastics. Thermal properties - Determination of stiffness in torsion of flexible materials (general method) | Current |
| BS 2782-1:Method 130A:1991 | Methods of testing plastics. Thermal properties - Determination of the thermal stability of polyvinyl chloride by the Congo red method | Current |
| BS 2782-1 Method 124A:1992 | Methods of testing plastics. Thermal properties - Determination of the softening point of synthetic resin (ring and ball method) | Withdrawn |
| BS 2782-1:Method 140C:1993 | Methods of testing plastics. Thermal properties - Determination of the combustibility of specimens using a 125 mm flame source | Withdrawn |
| BS 2782-1 Method 140B:1993 | Methods of testing plastics. Thermal properties - Determination of the burning behaviour of flexible vertical specimens in contact with a small-flame ignition source | Withdrawn |
| BS 2782-1:Methods 134A and 134B:1992 | Methods of testing plastics. Thermal properties - Determination of the oxidation induction time of thermoplastics | Withdrawn |
| BS 2782-1:Method 151A:1984 | Methods of testing plastics. Thermal properties. - Determination of cold bend temperature of flexible polyvinyl chloride extrusion compound | Withdrawn |
| BS EN ISO 868:1998 | Plastics and ebonite. Determination of indentation hardness by means of a a durometer (Shore hardness) | Withdrawn |
| BS EN ISO 868:2003 | Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness) | Current |
| BS ISO 21509:2006 | Plastics and ebonite. Verification of Shore durometers | Current |
| BS EN ISO 11403-1:2003 | Plastics. Acquisition and presentation of comparable multipoint data - Mechanical properties | Current, Work in Hand |
| BS EN ISO 11403-1:2000 | Plastics. Acquisition and presentation of comparable multipoint data - Mechanical properties | Withdrawn |
| BS EN ISO 11403-3:2001 | Plastics. Acquisition and presentation of comparable multipoint data - Environmental influences on properties | Current |
| BS EN ISO 11403-2:2004 | Plastics. Acquisition and presentation of comparable multipoint data - Thermal and processing properties | Withdrawn |
| BS EN ISO 11403-2:2000 | Plastics. Acquisition and presentation of comparable multipoint data - Thermal and processing properties | Withdrawn |
| BS EN ISO 11403-2:2012 | Plastics. Acquisition and presentation of comparable multipoint data - Thermal and processing properties | Current |
| BS EN ISO 10350-2:2011 | Plastics. Acquisition and presentation of comparable single-point data - Long-fibre-reinforced plastics | Current |
| BS EN ISO 10350-1:2001 | Plastics. Acquisition and presentation of comparable single-point data - Moulding materials | Withdrawn |
| BS EN ISO 10350-1:2008 | Plastics. Acquisition and presentation of comparable single-point data - Moulding materials | Current, Work in Hand |
| BS EN ISO 3671:1999 | Plastics. Aminoplastic moulding materials. Determination of volatile matter | Current |
| BS ISO 29664:2010 | Plastics. Artificial weathering including acidic deposition | Current |
| BS ISO 16869:2008 | Plastics. Assessment of the effectiveness of fungistatic compounds in plastics formulations | Current |
| BS ISO 16869:2001 | Plastics. Assessment of the effectiveness of fungistatic compounds in plastics formulations | Withdrawn |
| BS EN ISO 293:2005 | Plastics. Compression moulding of test specimens of thermoplastic materials | Current |
| BS EN ISO 293:2003 | Plastics. Compression moulding test specimens of thermoplastic materials | Withdrawn |
| BS EN ISO 60:2000 | Plastics. Determination of apparent density of material that can be poured from a specified funnel | Current |
| BS EN ISO 61:2000 | Plastics. Determination of apparent density of moulding material that cannot be poured from a specified funnel | Current |
| BS EN ISO 3451-4:2000 | Plastics. Determination of ash - Polyamides | Current |
| BS EN ISO 3451-1:1997 | Plastics. Determination of ash - General methods | Withdrawn |
| BS EN ISO 3451-5:2002 | Plastics. Determination of ash - Poly(vinyl chloride) | Current |
| BS EN ISO 3451-5:1997 | Plastics. Determination of ash - Poly(vinyl chloride) | Withdrawn |
| BS EN ISO 3451-1:2008 | Plastics. Determination of ash - General methods | Current |
| BS ISO 16014-1:2003 | Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - General principles | Withdrawn |
| BS EN ISO 16014-5:2012 | Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Method using light-scattering detection | Current |
| BS ISO 16014-4:2012 | Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - High-temperature method | Current |
| BS ISO 16014-1:2012 | Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - General principles | Current |
| BS ISO 16014-2:2012 | Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Universal calibration method | Current |
| BS ISO 16014-3:2012 | Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Low-temperature method | Current |
| BS ISO 16014-2:2003 | Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Universal calibration method | Withdrawn |
| BS ISO 16014-3:2003 | Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Low-temperature method | Withdrawn |
| BS ISO 16014-4:2003 | Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - High-temperature method | Withdrawn |
| BS EN 1122:2001 | Plastics. Determination of cadmium. Wet decomposition method | Current |
| BS ISO 15033:2000 | Plastics. Determination of caprolactam and its cyclic and linear oligomers by HPLC | Withdrawn |
| BS ISO 15033:2007 | Plastics. Determination of caprolactam and its cyclic and linear oligomers by HPLC | Current |
| BS EN ISO 179-1:2001 | Plastics. Determination of Charpy impact properties - Non-instrumented impact test | Withdrawn |
| BS EN ISO 179-1:2010 | Plastics. Determination of Charpy impact properties - Non-instrumented impact test | Current |
| BS EN ISO 179-2:1999+A1:2012 | Plastics. Determination of Charpy impact properties - Instrumented impact test | Current |
| BS EN ISO 179-1:1999 | Plastics. Determination of Charpy impact properties - Non-instrumented impact test | Withdrawn |
| BS EN ISO 179:1997 | Plastics. Determination of Charpy impact strength | Current |
| BS EN ISO 604:2003 | Plastics. Determination of compressive properties | Current |
| BS EN ISO 604:1997 | Plastics. Determination of compressive properties | Withdrawn |
| BS EN ISO 899-1:1997 | Plastics. Determination of creep behaviour - Tensile creep | Withdrawn |
| BS EN ISO 899-2:1997 | Plastics. Determination of creep behaviour - Flexural creep by three-point loading | Withdrawn |
| BS EN ISO 899-2:2003 | Plastics. Determination of creep behaviour - Flexural creep by three-point loading | Current |
| BS EN ISO 899-1:2003 | Plastics. Determination of creep behaviour - Tensile creep | Current, Work in Hand |
| BS ISO 16790:2005 | Plastics. Determination of drawing characteristics of thermoplastics in the molten state | Current |
| BS ISO 6721-4:2008 | Plastics. Determination of dynamic mechanical properties - Tensile vibration. Non-resonance method | Current |
| BS EN ISO 6721-1:2002 | Plastics. Determination of dynamic mechanical properties - General principles | Withdrawn |
| BS ISO 6721-10:1999 | Plastics. Determination of dynamic mechanical properties - Complex shear viscosity using a parallel-plate oscillatory rheometer | Current |
| BS EN ISO 6721-3:1996 | Plastics. Determination of dynamic mechanical properties - Flexural vibration. Resonance-curve method | Current |
| BS EN ISO 6721-2:1996 | Plastics. Determination of dynamic mechanical properties - Torsion-pendulum method | Withdrawn |
| BS EN ISO 6721-1:1996 | Plastics. Determination of dynamic mechanical properties - General principles | Withdrawn |
| BS EN ISO 6721-2:2008 | Plastics. Determination of dynamic mechanical properties - Torsion-pendulum method | Current |
| BS ISO 6721-11:2012 | Plastics. Determination of dynamic mechanical properties - Glass transition temperature | Current |
| BS ISO 6721-9:1997+A1:2007 | Plastics. Determination of dynamic mechanical properties - Tensile vibration. Sonic-pulse propagation method | Current |
| BS EN ISO 6721-1:2011 | Plastics. Determination of dynamic mechanical properties - General principles | Current |
| BS EN ISO 4600:1998 | Plastics. Determination of environmental stress cracking (ESC). Ball or pin impression method | Withdrawn |
| BS EN ISO 6252:1998 | Plastics. Determination of environmental stress cracking (ESC). Constant-tensile-stress method | Withdrawn |
| BS EN ISO 178:1997 | Plastics. Determination of flexural properties | Withdrawn |
| BS EN ISO 178:2003 | Plastics. Determination of flexural properties | Withdrawn |
| BS EN ISO 178:2010 | Plastics. Determination of flexural properties | Current, Work in Hand |
| BS ISO 17281:2002 | Plastics. Determination of fracture toughness (Gic and Kic) at moderately high loading rates (1 m/s) | Current |
| BS ISO 13586:2000 | Plastics. Determination of fracture toughness (Gic and Kic). Linear elastic fracture mechanics (LEFM) approach | Current |
| BS EN ISO 2039-1:2003 | Plastics. Determination of hardness - Ball indentation method | Current |
| BS EN ISO 2039-1:1997 | Plastics. Determination of hardness - Ball indentation method | Withdrawn |
| BS EN ISO 180:1997 | Plastics. Determination of Izod impact strength | Withdrawn |
| BS EN ISO 180:2001 | Plastics. Determination of Izod impact strength | Current, Work in Hand |
| BS EN ISO 176:2000 | Plastics. Determination of loss of plasticizers. Activated carbon method | Withdrawn |
| BS EN ISO 176:2005 | Plastics. Determination of loss of plasticizers. Activated carbon method | Current |
| BS EN ISO 6427:1999 | Plastics. Determination of matter extractable by organic solvents (conventional methods) | Withdrawn |
| BS EN ISO 3146:1997 | Plastics. Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers | Withdrawn |
| BS EN ISO 3146:2000 | Plastics. Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods | Current |
| BS EN ISO 177:2000 | Plastics. Determination of migration of plasticizers | Current |
| BS EN ISO 6603-1:2000 | Plastics. Determination of multi-axial impact behaviour of rigid plastics - Non-instrumented impact testing | Current |
| BS EN ISO 6603-2:2000 | Plastics. Determination of multi-axial impact behaviour of rigid plastics - Instrumented puncture testing | Current |
| BS EN ISO 6603-1:1997 | Plastics. Determination of multi-axial impact behaviour of rigid plastics - Falling dart method | Withdrawn |
| BS EN ISO 6603-2:1997 | Plastics. Determination of multi-axial impact behaviour of rigid plastics - Instrumented puncture test | Withdrawn |
| BS ISO 8660:2002 | Plastics. Determination of permanganate absorption number of caprolactam. Spectrometric method | Current |
| BS EN ISO 6186:1999 | Plastics. Determination of pourability | Current |
| BS EN ISO 489:1999 | Plastics. Determination of refractive index | Current |
| BS EN ISO 22088-4:2006 | Plastics. Determination of resistance to environmental stress cracking (ESC) - Ball or pin impression method | Current |
| BS EN ISO 22088-3:2006 | Plastics. Determination of resistance to environmental stress cracking (ESC) - Bent strip method | Current |
| BS EN ISO 22088-5:2009 | Plastics. Determination of resistance to environmental stress cracking (ESC) - Constant tensile deformation method | Current |
| BS EN ISO 22088-1:2006 | Plastics. Determination of resistance to environmental stress cracking (ESC) - General guidance | Current |
| BS EN ISO 22088-2:2006 | Plastics. Determination of resistance to environmental stress cracking (ESC) - Constant tensile load method | Current |
| BS EN ISO 22088-6:2009 | Plastics. Determination of resistance to environmental stress cracking (ESC) - Slow strain rate method | Current |
| BS EN ISO 4599:1997 | Plastics. Determination of resistance to environmental stress cracking (ESC). Bent strip method | Withdrawn |
| BS ISO 9352:2012 | Plastics. Determination of resistance to wear by abrasive wheels | Current |
| BS ISO 17744:2004 | Plastics. Determination of specific volume as a function of temperature and pressure (pVT diagram). Piston apparatus method | Current |
| BS EN ISO 75-1:2004 | Plastics. Determination of temperature of deflection under load - General test method | Withdrawn |
| BS EN ISO 75-2:1996 | Plastics. Determination of temperature of deflection under load - Plastics and ebonite | Withdrawn |
| BS EN ISO 75-3:1996 | Plastics. Determination of temperature of deflection under load - High-strength thermosetting laminates and long-fibre-reinforced plastics | Withdrawn |
| BS EN ISO 75-1:1996 | Plastics. Determination of temperature of deflection under load - General test method | Withdrawn |
| BS EN ISO 75-2:2004 | Plastics. Determination of temperature of deflection under load - Plastics and ebonite | Withdrawn |
| BS EN ISO 75-3:2004 | Plastics. Determination of temperature of deflection under load - High-strength thermosetting laminates and long-fibre-reinforced plastics | Current |
| BS EN ISO 75-2:2013 | Plastics. Determination of temperature of deflection under load - Plastics and ebonite | Current |
| BS EN ISO 75-1:2013 | Plastics. Determination of temperature of deflection under load - General test method | Current |
| BS EN ISO 527-1:2012 | Plastics. Determination of tensile properties - General principles | Current |
| BS EN ISO 527-2:2012 | Plastics. Determination of tensile properties - Test conditions for moulding and extrusion plastics | Current |
| BS EN ISO 527-1:1996 | Plastics. Determination of tensile properties - General principles | Withdrawn |
| BS EN ISO 527-2:1996 | Plastics. Determination of tensile properties - Test conditions for moulding and extrusion plastics | Withdrawn |
| BS ISO 18872:2007 | Plastics. Determination of tensile properties at high strain rates | Current |
| BS EN ISO 8256:2004 | Plastics. Determination of tensile-impact strength | Current |
| BS EN ISO 8256:1997 | Plastics. Determination of tensile-impact strength | Withdrawn |
| BS ISO 15850:2002 | Plastics. Determination of tension-tension fatigue crack propagation. Linear elastic fracture mechanics (LEFM) approach | Current, Work in Hand |
| BS ISO 974:2000 | Plastics. Determination of the brittleness temperature by impact | Current |
| BS ISO 16929:2002 | Plastics. Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test | Withdrawn |
| BS ISO 16929:2013 | Plastics. Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test | Current |
| BS EN ISO 20200:2005 | Plastics. Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test | Current |
| BS EN ISO 4611:2001 | Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist | Withdrawn |
| BS EN ISO 4611:2010 | Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist | Current |
| BS EN ISO 4611:2008 | Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist | Withdrawn |
| BS ISO 11443:2005 | Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers | Current |
| BS EN ISO 2556:2001 | Plastics. Determination of the gas transmission rate of films and thin sheets under atmospheric pressure. Manometric method | Current |
| BS EN ISO 1133-1:2011 | Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Standard method | Current |
| BS EN ISO 1133-2:2011 | Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Method for materials sensitive to time-temperature history and/or moisture | Current |
| BS EN ISO 1133:2005 | Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics | Withdrawn |
| BS EN ISO 1133:2000 | Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics | Withdrawn |
| BS EN ISO 10927:2011 | Plastics. Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) | Current |
| BS EN ISO 182-2:2000 | Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - pH method | Current |
| BS EN ISO 182-4:2001 | Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Potentiometric method | Withdrawn |
| BS EN ISO 182-3:2000 | Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Conductometric method | Current |
| BS EN ISO 182-4:2000 | Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Potentiometric method | Current |
| BS EN ISO 2578:1999 | Plastics. Determination of the time-temperature limits after prolonged exposure to heat | Current |
| BS EN ISO 13468-1:1997 | Plastics. Determination of the total luminous transmittance of transparent materials - Single-beam instrument | Current |
| BS EN ISO 13468-2:2006 | Plastics. Determination of the total luminous transmittance of transparent materials - Double-beam instrument | Current |
| BS ISO 20965:2005 | Plastics. Determination of the transient extensional viscosity of polymer melts | Current |
| BS EN ISO 17556:2004 | Plastics. Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved | Withdrawn |
| BS EN ISO 17556:2012 | Plastics. Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved | Current |
| BS ISO 15985:2004 | Plastics. Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions. Method by analysis of released biogas | Current |
| BS ISO 14853:2005 | Plastics. Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system. Method by measurement of biogas production | Current |
| BS ISO 13975:2012 | Plastics. Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems. Method by measurement of biogas production | Current |
| BS EN ISO 1628-1:2009+A1:2012 | Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers - General principles | Current |
| BS EN ISO 1628-1:1998 | Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers - General principles | Withdrawn |
| BS ISO 1628-5:1998 | Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers - Thermoplastic polyester (TP) homopolymers and copolymers | Current |
| BS EN ISO 22007-1:2012 | Plastics. Determination of thermal conductivity and thermal diffusivity - General principles | Current |
| BS EN ISO 22007-3:2012 | Plastics. Determination of thermal conductivity and thermal diffusivity - Temperature wave analysis method | Current |
| BS EN ISO 22007-4:2012 | Plastics. Determination of thermal conductivity and thermal diffusivity - Laser flash method | Current |
| BS EN ISO 22007-2:2012 | Plastics. Determination of thermal conductivity and thermal diffusivity - Transient plane heat source (hot disc) method | Current, Work in Hand |
| BS EN ISO 305:1999 | Plastics. Determination of thermal stability of poly (vinyl chloride) related chlorine-containing homopolymers and copolymers and their compounds. Discoloration method | Current |
| BS EN ISO 12058-1:2002 | Plastics. Determination of viscosity using a falling-ball viscometer - Inclined-tube method | Current |
| BS EN ISO 62:2008 | Plastics. Determination of water absorption | Current |
| BS EN ISO 62:1999 | Plastics. Determination of water absorption | Withdrawn |
| BS EN ISO 15512:2003 | Plastics. Determination of water content | Withdrawn |
| BS EN ISO 15512:2009 | Plastics. Determination of water content | Current, Work in Hand |
| BS EN ISO 11357-7:2013 | Plastics. Differential scanning calorimetry - Determination of crystallization kinetics | Current |
| BS EN ISO 11357-3:2013 | Plastics. Differential scanning calorimetry (DSC) - Determination of temperature and enthalpy of melting and crystallization | Current |
| BS EN ISO 11357-4:2013 | Plastics. Differential scanning calorimetry (DSC) - Determination of specific heat capacity | Current |
| BS EN ISO 11357-6:2013 | Plastics. Differential scanning calorimetry (DSC) - Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) | Current |
| BS ISO 11357-2:2013 | Plastics. Differential scanning calorimetry (DSC) - Determination of glass transition temperature and glass transition step height | Current |
| BS ISO 11357-5:2013 | Plastics. Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion | Current |
| BS EN ISO 11357-1:2009 | Plastics. Differential scanning calorimetry (DSC) - General principles | Current |
| BS ISO 11357-6:2002 | Plastics. Differential scanning calorimetry (DSC) - Determination of oxidation induction time | Withdrawn |
| BS ISO 11357-5:1999 | Plastics. Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion | Withdrawn |
| BS ISO 11357-2:1999 | Plastics. Differential scanning calorimetry (DSC) - Determination of glass transition temperature | Withdrawn |
| BS ISO 11357-3:1999 | Plastics. Differential scanning calorimetry (DSC) - Determination of temperature and enthalpy of melting and crystallization | Withdrawn |
| BS EN ISO 11357-1:1997 | Plastics. Differential scanning calorimetry (DSC) - General principles | Withdrawn |
| BS EN ISO 4583:1998 | Plastics. Epoxy resins and related materials. Determination of easily saponifiable chlorine | Withdrawn |
| BS EN 14987:2006 | Plastics. Evaluation of disposability in waste water treatment plants. Test scheme for final acceptance and specifications | Current |
| BS EN ISO 846:1997 | Plastics. Evaluation of the action of microorganisms | Current |
| BS EN ISO 25762:2012 | Plastics. Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites | Current |
| BS ISO 17282:2004 (CD-ROM) | Plastics. Guide to the acquisition and presentation of design data | | |
| BS ISO 17282:2004 (COVERS) | Plastics. Guide to the acquisition and presentation of design data | | |
| BS ISO 17282:2004 | Plastics. Guide to the acquisition and presentation of design data | Current, Work in Hand |
| BS EN ISO 7327:1997 | Plastics. Hardeners and accelerators for epoxide resins. Determination of free acid in acid anhydride | Current |
| BS EN ISO 4608:1998 | Plastics. Homopolymer and copolymer resins of vinyl chloride for general use. Determination of plasticizer absorption at room temperature | Current |
| BS ISO 24538:2008 | Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder | Current |
| BS EN ISO 6401:2004 | Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of residual vinyl chloride monomer. Gas chromatographic method | Withdrawn |
| BS EN ISO 294-3:2003 | Plastics. Injection moulding of test specimens of thermoplastic materials - Small plates | Current |
| BS EN ISO 294-1:1998 | Plastics. Injection moulding of test specimens of thermoplastic materials - General principles, and moulding of multipurpose and bar test specimens | Current, Work in Hand |
| BS EN ISO 294-4:1998 | Plastics. Injection moulding of test specimens of thermoplastic materials - Determination of moulding shrinkage | Withdrawn |
| BS EN ISO 294-3:1998 | Plastics. Injection moulding of test specimens of thermoplastic materials - Small plates | Withdrawn |
| BS ISO 294-5:2011 | Plastics. Injection moulding of test specimens of thermoplastic materials - Preparation of standard specimens for investigating anisotropy | Current |
| BS EN ISO 294-4:2003 | Plastics. Injection moulding of test specimens of thermoplastic materials - Determination of moulding shrinkage | Current |
| BS ISO 9370:1997 | Plastics. Instrumental determination of radiant exposure in weathering tests. General guidance and basic test method | Current, Work in Hand |
| BS EN ISO 8618:1998 | Plastics. Liquid phenolic resins. Conventional determination of non-volatile matter | Withdrawn |
| BS EN ISO 8989:1998 | Plastics. Liquid phenolic resins. Determination of water miscibility | Current |
| BS EN ISO 8989:1995 | Plastics. Liquid phenolic resins. Determination of water miscibility | Withdrawn |
| BS EN ISO 1675:1998 | Plastics. Liquid resins. Determination of density by the pyknometer method | Current |
| BS ISO 22196:2007 | Plastics. Measurement of antibacterial activity on plastics surfaces | Withdrawn |
| BS EN ISO 3915:1999 | Plastics. Measurement of resistivity of conductive plastics | Current |
| BS EN ISO 4614:2000 | Plastics. Melamine-formaldehyde mouldings. Determination of extractable formaldehyde | Current |
| BS EN ISO 1183-2:2004 | Plastics. Methods for determining the density of non-cellular plastics - Density gradient column method | Current |
| BS EN ISO 1183-1:2004 | Plastics. Methods for determining the density of non-cellular plastics - Immersion method, liquid pyknometer method and titration method | Withdrawn |
| BS EN ISO 1183-3:1999 | Plastics. Methods for determining the density of non-cellular plastics - Gas pyknometer method | Current |
| BS EN ISO 1183-1:2012 | Plastics. Methods for determining the density of non-cellular plastics - Immersion method, liquid pyknometer method and titration method | Current |
| BS ISO 15314:2004 | Plastics. Methods for marine exposure | Current |
| BS EN ISO 877:1997 | Plastics. Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors. | Withdrawn |
| BS EN ISO 4892-1:2001 | Plastics. Methods of exposure to laboratory light sources - General guidance | Current, Work in Hand |
| BS EN ISO 4892-3:2000 | Plastics. Methods of exposure to laboratory light sources - Fluorescent UV lamps | Withdrawn |
| BS EN ISO 4892-2:2013 | Plastics. Methods of exposure to laboratory light sources - Xenon-arc lamps | Current |
| BS EN ISO 4892-2:2000 | Plastics. Methods of exposure to laboratory light sources - Xenon-arc sources | Withdrawn |
| BS EN ISO 4892-3:2006 | Plastics. Methods of exposure to laboratory light sources - Fluorescent UV lamps | Current, Work in Hand |
| BS EN ISO 4892-2:2006+A1:2009 | Plastics. Methods of exposure to laboratory light sources - Xenon-arc lamps | Withdrawn |
| BS EN ISO 877-2:2010 | Plastics. Methods of exposure to solar radiation - Direct weathering and exposure behind window glass | Current |
| BS EN ISO 877-1:2010 | Plastics. Methods of exposure to solar radiation - General guidance | Current |
| BS EN ISO 877-3:2010 | Plastics. Methods of exposure to solar radiation - Intensified weathering using concentrated solar radiation | Current |
| BS EN ISO 175:2010 | Plastics. Methods of test for the determination of the effects of immersion in liquid chemicals | Current |
| BS EN ISO 175:2001 | Plastics. Methods of test for the determination of the effects of immersion in liquid chemicals | Withdrawn |
| BS EN ISO 3167:2003 | Plastics. Multipurpose test specimens | Current |
| BS EN ISO 3167:1997 | Plastics. Multipurpose-test specimens | Withdrawn |
| BS EN ISO 172:1998 | Plastics. Phenol-formaldehyde mouldings. Detection of free ammonia | Current |
| BS EN ISO 120:1998 | Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium compounds. Colorimetric comparison method | Current |
| BS ISO 14849:1999 | Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium compounds. Indophenol method | Current |
| BS EN ISO 119:1998 | Plastics. Phenol-formaldehyde mouldings. Determination of free phenols. Iodometric method | Current |
| BS EN ISO 308:1998 | Plastics. Phenolic moulding materials. Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) | Current |
| BS EN ISO 8619:1996 | Plastics. Phenolic resin powder. Determination of flow distance on a glass plate | Withdrawn |
| BS EN ISO 8619:1998 | Plastics. Phenolic resin powder. Determination of flow distance on a heated glass plate | Withdrawn |
| BS EN ISO 8619:2004 | Plastics. Phenolic resin powder. Determination of flow distance on a heated glass plate | Current |
| BS EN ISO 8620:1996 | Plastics. Phenolic resin powder. Sieve analysis using air-jet sieve apparatus | Withdrawn |
| BS EN ISO 9371:1995 | Plastics. Phenolic resins in the liquid state or in solution. Determination of viscosity | Withdrawn |
| BS EN ISO 8975:1995 | Plastics. Phenolic resins. Determination of pH | Current |
| BS EN ISO 8987:1996 | Plastics. Phenolic resins. Determination of reactivity on a B-transformation test plate | Withdrawn |
| BS EN ISO 8987:1998 | Plastics. Phenolic resins. Determination of reactivity on a B-transformation test plate | Withdrawn |
| BS EN ISO 8987:2005 | Plastics. Phenolic resins. Determination of reactivity on aB-transformat ion test plate | Current |
| BS EN ISO 8974:2002 | Plastics. Phenolic resins. Determination of residual phenol content by gas chromatography | Current |
| BS EN ISO 8974:1999 | Plastics. Phenolic resins. Determination of residual phenol content by gas chromatography | Withdrawn |
| BS EN ISO 8974:1995 | Plastics. Phenolic resins. Determination of residual phenol content by gas chromatography | Withdrawn |
| BS EN ISO 9396:1996 | Plastics. Phenolic resins. Determination of the gel time at a given temperature using automatic apparatus | Withdrawn |
| BS EN ISO 6401:2008 | Plastics. Poly(vinyl chloride). Determination of residual vinyl chloride monomer. Gas-chromatographic method | Current |
| BS EN ISO 1110:1998 | Plastics. Polyamides. Accelerated conditioning of test specimens | Current |
| BS EN ISO 11337:2010 | Plastics. Polyamides. Determination of e-caprolactam and w-laurolactam by gas chromatography | Current |
| BS EN ISO 11337:2004 | Plastics. Polyamides. Determination of e-caprolactam and w-laurolactum by gas chromatography | Withdrawn |
| BS EN ISO 307:1998 | Plastics. Polyamides. Determination of viscosity number | Withdrawn |
| BS ISO 15373:2001 | Plastics. Polymer dispersions. Determination of free formaldehyde | Current |
| BS ISO 1625:1998 | Plastics. Polymer dispersions. Determination of non-volatile matter (residue) at specified temperatures | Withdrawn |
| BS EN ISO 3219:1995 | Plastics. Polymers/resins in the liquid state or as emulsions or dispersions. Determination of viscosity using a rotational viscometer with defined shear rate | Current |
| BS EN ISO 4577:1999 | Plastics. Polypropylene and propylene-copolymers. Determination of thermal oxidative stability in air. Oven method | Current |
| BS EN ISO 2818:1996 | Plastics. Preparation of test specimens by machining | Current |
| BS EN ISO 183:2000 | Plastics. Qualitative evaluation of the bleeding of colorants | Withdrawn |
| BS EN ISO 2555:2000 | Plastics. Resins in the liquid state or as emulsions or dispersions. Determination of apparent viscosity by the Brookfield Test method | Current |
| BS EN ISO 483:1999 | Plastics. Small enclosures for conditioning and testing using aqueous solutions to maintain relative humidity at constant value | Withdrawn |
| BS EN ISO 483:2005 | Plastics. Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at constant value | Current |
| BS EN ISO 291:1997 | Plastics. Standard atmospheres for conditioning and testing | Withdrawn |
| BS EN ISO 291:2008 | Plastics. Standard atmospheres for conditioning and testing | Current |
| BS EN ISO 291:2005 | Plastics. Standard atmospheres for conditioning and testing | Withdrawn |
| BS ISO 20753:2008 | Plastics. Test specimens | Current |
| BS ISO 11358-2:2005 | Plastics. Thermographimetry (TG) of polymers - Determination of activation energy | Current |
| BS EN ISO 11358:1997 | Plastics. Thermogravimetry (TG) of polymers. General principles | Current |
| BS ISO 11359-3:2002 | Plastics. Thermomechanical analysis (TMA) - Determination of penetration temperature | Current |
| BS ISO 11359-1:1999 | Plastics. Thermomechanical analysis (TMA) - General principles | Current, Work in Hand |
| BS ISO 11359-2:1999 | Plastics. Thermomechanical analysis (TMA) - Determination of coefficient of linear thermal expansion and glass transition temperature | Current |
| BS EN ISO 306:2004 | Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST) | Current, Work in Hand |
| BS EN ISO 306:1997 | Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST) | Withdrawn |
| BS EN ISO 7808:1999 | Plastics. Thermosetting moulding materials. Determination of transfer flow | Current |
| BS EN ISO 11248:2000 | Plastics. Thermosetting moulding materials. Evaluation of short-term performance at elevated temperatures | Current |
| BS ISO 12000:2000 | Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Definitions and review of test methods | Current, Work in Hand |
| BS ISO 12000:1996 | Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Definitions and review of test methods | Withdrawn |
| BS ISO 13741-1:1998 | Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Determination of residual monomers and other organic components by capillary-column gas chromatography - Direct liquid injection method | Current |
| BS ISO 13741-2:1998 | Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Determination of residual monomers and other organic components by capillary-column gas chromatography - Headspace method | Current |
| BS 4618-4.1:1972 | Recommendations for the presentation of plastics design data. Environmental and chemical effects - Chemical resistance to liquids | Obsolescent |
| BS 4618-4.2:1972 | Recommendations for the presentation of plastics design data. Environmental and chemical effects - Resistance to natural weathering | Obsolescent |
| BS 4618-4.3:1974 | Recommendations for the presentation of plastics design data. Environmental and chemical effects - Resistance to colour change produced by exposure to light | Current |
| BS 4618-4.4:1973 | Recommendations for the presentation of plastics design data. Environmental and chemical effects - The effect of marine exposure | Obsolescent |
| BS 4618-4.5:1974 | Recommendations for the presentation of plastics design data. Environmental and chemical effects - The effect on plastics of soil burial and biological attack | Obsolescent |
| BS 4618-4.6:1974 | Recommendations for the presentation of plastics design data. Environmental and chemical effects - The thermal endurance of plastics | Current |
| BS 4618-1.1.3:1974 | Recommendations for the presentation of plastics design data. Mechanical properties - Creep lateral contraction ratio (Poisson's ratio) | Current |
| BS 4618-5.4:1972 | Recommendations for the presentation of plastics design data. Other properties - Acoustical properties (mechanical damping capacity) | Obsolescent |
