Skip to content
RSS feed for this category

General

Standards in development (243)

Sort by: Title | Status

Standard TitleStatus
BS 5760-0 Reliability of constructed or manufactured products, systems, equipment and components Part 0: Introductory guide to reliability and maintainabilityIdea
BS 5760-24 Reliability of constructed or manufactured components, systems, equipmen t and components Part 24: Guide to the integration of risk assessment in the inspection and testing of complex systemsAccepted
BS 5760-25 Specification of a Prior for Bayesian Reliability Demonstration Testsnull
BS 7000-4 Design Management Systems Part 4 - guide to managing design and constructionApproval
BS 7346-7 Components for smoke and heat control systems Part 7: Code of practice on functional recommendations and calculation methods for smoke and heat control systems for covered car parksPublic Comment
BS 7346-8 Code of Practice for components for smoke control systems Part 8: Guidelines for planning, design, installation, commissioning, use and maintenanceIdea
BS 7913 Guide to the conservation of heritage assetsPublic Comment
BS 8000-0 Execution of works on construction sites Part 0: Introduction and general principlesIdea
BS 8544 Guide for life-cycle costing of maintenance during the in-use phases of buildingsPublic Comment
BS 9266 Design of accessible and adaptable general needs housing - Code of practicePublic Comment
BS CEN/TR 16163 Conservation of cultural property - Exhibition lighting of cultural propertyPublic Comment
BS EN 12098-1 Controls for heating systems Part 1: Control equipment for hot water heating systemsApproval
BS EN 12098-3 Controls for heating systems Part 3: Control equipment for electrical heating systemsTechnical Review
BS EN 12101-10 Smoke and heat control systems Part 10: Power suppliesIdea
BS EN 12101-2 Smoke and heat control systems Part 2: Natural smoke and heat exhaust ventilatorsAccepted
BS EN 12101-3 Smoke and heat control systems Part 3 : Specification for powered smoke and heat control ventilatorsTechnical Review
BS EN 12101-9 Smoke and heat control systems Part 9: Control panelsIdea
BS EN 12792 EN 12792; Ventilation for buildings - Symbols, terminology and graphical symbolsIdea
BS EN 13141-11 prEN 13141-11; Ventilation for buildings - Performance testing of components/products for residential ventilation Part 11: Positive pressure ventilation systemsPublic Comment
BS EN 13141-6 Ventilation for buildings - Performance testing of components/products for residential ventilation Part 6: Exhaust ventilation system packages used in a single dwellingPublic Comment
BS EN 13141-8 Ventilation for buildings - Performance testing of components/products for residential ventilation Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single roomPublic Comment
BS EN 13496 Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshesTechnical Review
BS EN 14908-1:2012 Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol Part 1: Protocol StackPublication
BS EN 14908-2:2012 Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol Part 2: Twisted Pair CommunicationPublication
BS EN 14908-3:2012 Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol Part 3: Power Line Channel SpecificationApproval
BS EN 14908-4:2012 Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol Part 4: IP CommunicationPublication
BS EN 15603 Energy performance of buildings - Overall energy use and definition of energy ratingsPublic Comment
BS EN 15628 Maintenance - Qualification of maintenance personnelPublic Comment
BS EN 15650 Ventilation for buildings - Fire dampersIdea
BS EN 15732 Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA)Approval
BS EN 15804:2012/A1 Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction productsAccepted
BS EN 15871 prEN 15871: Ventilation for buildings — Fire resisting duct sectionsAccepted
BS EN 15871 Ventilation for buildings - Fire resisting duct sectionsIdea
BS EN 15999-1 Conservation of cultural property - Guidelines for management of environmental conditions - Recommendation for showcases used for exhibition and preservation of cultural heritage Part 1: General requirementsPublic Comment
BS EN 1607 Thermal insulating products for building applications - Determination of tensile strength perpendicular to facesApproval
BS EN 16282-9 Equipment for commercial kitchens - Components for ventilation of commercial kitchens Part 9: Capture and containment performance of extraction systems for commercial kitchen - Test methodsPublic Comment
BS EN 16309 Sustainability of construction works - Assessment of social performance of buildings - MethodsPublic Comment
BS EN 16322 Conservation of cultural property - Test methods - Determination of drying propertiesTechnical Review
BS EN 16382 Thermal insulation products for building applications - Determination of the pull-through resistance of anchors through thermal insulation products external thermal insulation composite systems with renders (ETICS)Public Comment
BS EN 16383 Thermal insulation products for building applications - Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS)Public Comment
BS EN 16455 Conservation of cultural heritage — Determination of soluble salts in natural stone and related materials used in cultural heritagePublic Comment
BS EN 16491 Thermal insulation products for buildings - Factory made composite products - SpecificationPublic Comment
BS EN 16515 Conservation of Cultural Heritage - Guidelines to characterize natural stone used in cultural heritagePublic Comment
BS EN 16572 Conservation of cultural property - Glossary of technical terms concerning mortars for masonry, renders and plasters used in cultural heritagePublic Comment
Opens a new windowBS EN 16573 Ventilation for Buildings - Performance testing of components for residential buildings - Multifunctional balanced ventilation units for single family dwellings, including heat pumpsPublic Comment
BS EN 16581 Conservation of cultural property - Surface protection for porous inorganic materials - Laboratory test methods for the evaluation of the performance of water repellent productsPublic Comment
BS EN 1751 Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valvesPublic Comment
BS EN 1993-1-1:2005/A1 Eurocode 3: Design of steel structures Part 1-1: General rules and rules for buildingsApproval
BS EN 60300-1 ED.3 Dependability management Part 1: Guidance for management and applicationPublic Comment
BS EN 61124 Reliability testing – Compliance tests for constant failure rate and constant failure intensitynull
BS EN 61158-1 ED 1.0 Industrial communication networks - Fieldbus specifications Part 1: Overview and guidance for the IEC 61158 and IEC 61784 seriesPublic Comment
BS EN 61158-2 Industrial communication networks - Fieldbus specifications Part 2:Physical layer specification and service definitionPublic Comment
BS EN 61158-3-1 Industrial communication networks - Fieldbus specifications - Part 3-1: Data-link layer service definition - Type 1 elementsnull
BS EN 61158-3-12 Industrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer service definition - Type 12 elementsnull
BS EN 61158-3-13 Industrial communication networks - Fieldbus specifications - Part 3-13: Data-link layer service definition - type 13 elementsnull
BS EN 61158-3-14 Industrial communication networks - Fieldbus specifications - Part 3-14: Data-link Layer service definition - Type 14 elementsnull
BS EN 61158-3-19 Industrial communication networks - Fieldbus specifications - Part 3-19:Data-link layer service definition - Type 19 elementsnull
BS EN 61158-3-2 Industrial communication networks - Fieldbus specifications - Part 3-2: Data-link layer service definition - Type 2 elementsnull
BS EN 61158-3-20 Industrial communication networks - Fieldbus specifications - Part 3-22: Data-link layer service definition - Type 22 elementsnull
BS EN 61158-3-20 Industrial communication networks - Fieldbus specifications - Part 3-22: Data-link layer service definition - Type 22 elementsnull
BS EN 61158-3-20 Industrial communication networks - Fieldbus specifications - Part 3-24: Data-link layer service definition - Type 24 elementsPublic Comment
BS EN 61158-3-3 Industrial communication networks - Fieldbus specifications - Part 3-3: Data-link layer service definition - Type 3 elementsnull
BS EN 61158-3-4 Industrial communication networks - Fieldbus specifications - Part 3-4: Data-link layer service definition - Type 4 elementsnull
BS EN 61158-3-X Industrial communication networks - Fieldbus specifications Part 3-x: Data-link layer service definition - Type x elementsPublic Comment
BS EN 61158-4-1 Industrial communication networks - Fieldbus specifications - Part 4-1: Data-link layer protocol specification - Type 1 elementsnull
BS EN 61158-4-11 Industrial communication networks -Fieldbus specifications - Part 4-11: Data-link layer protocol specification - Type 11 elementsnull
BS EN 61158-4-12 Industrial communication networks -Fieldbus specifications - Part 4-12: Data-link layer protocol specification - Type 12 elementsnull
BS EN 61158-4-13 Industrial communication networks -Fieldbus specifications - Part 4-13: Data-link layer protocol specification - Type 13 elementsnull
BS EN 61158-4-14 Industrial communication networks -Fieldbus specifications - Part 4-14: Data-link layer protocol specification - Type 14 elementsnull
BS EN 61158-4-19 Industrial communication networks -Fieldbus specifications - Part 4-19: Data-link layer protocol specification - Type 19 elementsnull
BS EN 61158-4-2 Industrial communication networks -Fieldbus specifications - Part 4-2: Data-link layer protocol specification - Type 2 elementsnull
BS EN 61158-4-20 Industrial communication networks -Fieldbus specifications - Part 4-20: Data-link layer protocol specification - Type 20 elementsnull
BS EN 61158-4-21:2012/ Cor 1 Industrial communication networks - Fieldbus specifications Part 4-21: Data-link layer protocol specification - Type 21 elementsnull
BS EN 61158-4-22 Industrial communication networks -Fieldbus specifications - Part 4-22: Data-link layer protocol specification - Type 22 elementsnull
BS EN 61158-4-24 Industrial communication networks -Fieldbus specifications - Part 4-24: Data-link layer protocol specification - Type 24 elementsPublic Comment
BS EN 61158-4-3 Industrial communication networks -Fieldbus specifications - Part 4-3: Data-link layer protocaol specification - Type 3 elementsnull
BS EN 61158-4-4 Industrial communication networks -Fieldbus specifications - Part 4-4: Data-link layer protocol specification - Type 4 elementsnull
BS EN 61158-4-X Industrial communication networks - Fieldbus specifications Part 4-x: Data-link layer protocol specification - Type x elementsPublic Comment
BS EN 61158-5-10 Industrial communication networks -Fieldbus specifications - Part 5-10: Data-link layer service definition - Type 10 elementsnull
BS EN 61158-5-12 Industrial communication networks -Fieldbus specifications - Part 5-12: Data-link layer service definition - Type 12 elementsnull
BS EN 61158-5-13 Industrial communication networks -Fieldbus specifications - Part 5-13: Data-link layer service definition - Type 13 elementsnull
BS EN 61158-5-14 Industrial communication networks -Fieldbus specifications - Part 5-14: Data-link layer service definition - Type 14 elementsnull
BS EN 61158-5-19 Industrial communication networks -Fieldbus specifications - Part 5-19: Data-link layer service definition - Type 19 elementsnull
BS EN 61158-5-2 Industrial communication networks -Fieldbus specifications - Part 5-2: Data-link layer service definition - Type 2 elementsnull
BS EN 61158-5-20 Industrial communication networks -Fieldbus specifications - Part 5-20: Data-link layer service definition - Type 20 elementsnull
BS EN 61158-5-23 Industrial communication networks - Fieldbus specifications - Part 5-23: Application layer service definition - Type 23 elementsPublic Comment
BS EN 61158-5-23 Industrial communication networks -Fieldbus specifications - Part 5-23: Data-link layer service definition - Type 23 elementsPublic Comment
BS EN 61158-5-24 Industrial communication networks -Fieldbus specifications - Part 5-24: Data-link layer service definition - Type 24 elementsPublic Comment
BS EN 61158-5-3 Industrial communication networks -Fieldbus specifications - Part 5-3: Data-link layer service definition - Type 3 elementsnull
BS EN 61158-5-4 Industrial communication networks -Fieldbus specifications - Part 5-4: Data-link layer service definition - Type 4 elementsnull
BS EN 61158-5-5 Industrial communication networks -Fieldbus specifications - Part 5-5: Data-link layer service definition - Type 5 elementsnull
BS EN 61158-5-9 Industrial communication networks -Fieldbus specifications - Part 5-9: Data-link layer service definition - Type 9 elementsnull
BS EN 61158-5-X Industrial communication networks - Fieldbus specifications Part 5-x: Application layer service definition - Type x elementsPublic Comment
BS EN 61158-6-10 Industrial communication network - Fieldbus specifications - Part 6-10: Data-link layer service definition - Type 10 elementsnull
BS EN 61158-6-12 Industrial communication network - Fieldbus specifications - Part 6-12: Data-link layer service definition - Type 12 elementsnull
BS EN 61158-6-13 Industrial communication network - Fieldbus specifications - Part 6-13: Data-link layer service definition - Type 13 elementsnull
BS EN 61158-6-14 Industrial communication network - Fieldbus specifications - Part 6-14: Data-link layer service definition - Type 14 elementsnull
BS EN 61158-6-19 Industrial communication network - Fieldbus specifications - Part 6-19: Data-link layer service definition - Type 19 elementsnull
BS EN 61158-6-2 Industrial communication network - Fieldbus specifications - Part 6-2: Data-link layer service definition - Type 2 elementsnull
BS EN 61158-6-20 Industrial communication network - Fieldbus specifications - Part 6-20: Data-link layer service definition - Type 20 elementsnull
BS EN 61158-6-22 Industrial communication network - Fieldbus specifications - Part 6-22: Data-link layer service definition - Type 22 elementsnull
BS EN 61158-6-22 Industrial communication networks- Fieldbus specifications Part 6-22: Application layer protocol specification - type 22 ElementsPublic Comment
BS EN 61158-6-23 Industrial communication network - Fieldbus specifications - Part 6-23: Data-link layer service definition - Type 23 elementsPublic Comment
BS EN 61158-6-23 Industrial communication networks - Fieldbus specifications - Part 6-23: Application layer protocol specification - Type 23 elementsPublic Comment
BS EN 61158-6-24 Industrial communication network - Fieldbus specifications - Part 6-24: Data-link layer service definition - Type 24 elementsPublic Comment
BS EN 61158-6-3 Industrial communication network - Fieldbus specifications - Part 6-3: Data-link layer service definition - Type 3 elementsnull
BS EN 61158-6-4 Industrial communication network - Fieldbus specifications - Part 6-4: Data-link layer service definition - Type 4 elementsnull
BS EN 61158-6-5 Industrial communication network - Fieldbus specifications - Part 6-5: Data-link layer service definition - Type 5 elementsnull
BS EN 61158-6-9 Industrial communication network - Fieldbus specifications - Part 6-9: Data-link layer service definition - Type 9 elementsnull
BS EN 61158-X Industrial communication networks - Fieldbus specifications Part 6-x: Application layer protocol specification - Type x elementsPublic Comment
BS EN 61703 Ed 2.0 Mathematical expressions for reliability; availability; maintainability and maintenance support termsAccepted
BS EN 61710 ED 2.0 Power law model - Goodness-of-fit tests and estimation methodsPublication
BS EN 61784-1 Industrial communication networks - Profiles Part 1: Fieldbus profilesPublic Comment
BS EN 61784-2 Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 (CPF 8 element)Public Comment
BS EN 61784-3-17 Industrial communication networks - Profiles Part 3-17: Functional safety fieldbuses - Additional specification for CPF 17null
BS EN 61784-3-8 Industrial communication networks - Profiles Part 3-8: Functional safety fieldbuses - Additional specification for CPF 8null
BS EN 61784-4 Digital data communications for measurement and control Part 4: Profiles for secure communications in industrial networksnull
BS EN 61784-5 Industrial communication networks - Profiles - Part 5: Installation of fieldbusesPublic Comment
BS EN 61784-5-1 Industrial communication networks - Profiles Part 5-1 Installation of fieldbuses - Installation profiles for CPF 1Approval
BS EN 61804-2 Function blocks (FB) for process control and Electronic device description language (EDDL) - Part 2: FB conceptAccepted
BS EN 61804-3 Function blocks (FB) for process control and EDDL Part 3: EDDL syntax and semanticsAccepted
BS EN 61804-4 Ed 2.0 Function blocks (FB) for process control Part 4: EDD interpretationAccepted
BS EN 61804-5 Function blocks (FB) for process control and Electronic device description language (EDDL) Part 5: EDDL Builtin libraryAccepted
BS EN 61918 Industrial communication networks - Installation of communication networks in industrial premisesPublication
BS EN 61918:2008/AMD1 Industrial communication networks - Installation of communication networks in industrial premisesApproval
BS EN 61987-12 Industrial Process Measurement and Control - Data Structures and Elements in Process Equipment Catalogues - Part 12: Lists of properties (LOP for flow measuring equipment for electronic data exchange.Public Comment
BS EN 61987-13 Industrial-Process Measurement and Control - Data Structures and Elements in Process Equipment Catalogues. Part 13: Lists of Properties (LOP) for Pressure Measuring Equipment for electronic data exchangeAccepted
BS EN 62198 ED.2 Project risk management - Application guidelinesPublic Comment
BS EN 62264-1 Enterprise system integration Part 1: Models and terminologyApproval
BS EN 62264-2 Enterprise-control system integration Part 2: Object model attributesApproval
BS EN 62337:2012/Cor 1 Commissioning of electrical, instrumentation and control systems in the process industry – Specific phases and milestonesPublication
BS EN 62453-2 FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION Part 2: Concepts and detailed descriptionAccepted
BS EN 62506 Methods for product accelerated testingPublication
BS EN 62541-1 OPC Unified Architecture Specification Part 1: Overview and Coneptsnull
BS EN 62541-10 OPC Unified Architecture Specification Part 10: Programsnull
BS EN 62541-100 OPC Unified Architecture Specification Part 100: Device Interfacenull
BS EN 62541-11 OPC Unified Architecture Specification Part 11: Historical Accessnull
BS EN 62541-13 OPC Unified Architecture Specification Part 13: Aggregatesnull
BS EN 62541-2 OPC Unified Architecture Specification Part 2: Security Modelnull
BS EN 62541-3 OPC Unified Architecture Specification Part 3: Address Space Modelnull
BS EN 62541-4 OPC Unified Architecture Specification Part 4: Servicesnull
BS EN 62541-5 OPC Unified Architecture Specification Part 5: Information Modelnull
BS EN 62541-6 OPC Unified Architecture Specification Part 6: Mappingsnull
BS EN 62541-7 OPC Unified Architecture Specification Part 7: Profilesnull
BS EN 62541-8 OPC Unified Architecture Specification Part 8: Data Accessnull
BS EN 62541-9 OPC Unified Architecture Specification Part 9: Alarms & conditionsnull
BS EN 62550 Spare parts managementnull
BS EN 62601 Industrial communication networks – Fieldbus specifications – WIA-PA communication network and communication profilePublication
BS EN 62657-2 Industrial communication networks – Wireless communication networks – Part 2: Coexistence managementApproval
BS EN 62673 Methodology for Communication Network Dependability Assessment and AssuranceApproval
BS EN 62714-1 Engineering data exchange format for use in industrial automation systems engineering - Part 1: Architecture and General RequirementsPublic Comment
BS EN 62714-2 ED 1.0 Engineering data exchange format for use in industrial automation systems engineering (AutomationML) - Part 2: Role LibrariesAccepted
BS EN 62734 Industrial communication networks - Fieldbus specifications - Wireless Systems for Industrial Automation: Process Control and Related Applications (based on ISA 100.11a)Public Comment
BS EN 62741 Reliability of systems; equipment and components. Guide to the demonstration of dependability requirements. The dependability caseAccepted
BS EN 62769 Field Device Integration – Part 1 to 7null
BS EN 62769-1 FIELD DEVICE INTEGRATION Part 1: OverviewAccepted
BS EN 62769-101-1 Field device integration (FDI) – Profiles Part 101-1: Foundation Fieldbus H1Accepted
BS EN 62769-101-2 Field device integration (FDI) - Profiles Part 101-2: Foundation Fieldbus HSEAccepted
BS EN 62769-103-1 Devices and integration in enterprise systems; Field Device Integration (FDI) - Profiles Part 103-1: PROFIBUSAccepted
BS EN 62769-103-4 Devices and integration in enterprise systems; Field Device Integration (FDI) - Profiles Part 103-4: PROFINETAccepted
BS EN 62769-109-1 Devices and integration in enterprise systems; Field Device Integration (FDI) - Profiles Part 109-1: HART® and WirelessHART®Accepted
BS EN 62769-2 Field device integration Part 2: FDI ClientAccepted
BS EN 62769-3 Field device integration Part 3: FDI ServerAccepted
BS EN 62769-4 Field device integration Part 4: FDI PackagesAccepted
BS EN 62769-5 Field device integration Part 5: FDI Information ModelAccepted
BS EN 62769-6 Field device integration Part 6: Technology MappingAccepted
BS EN 62769-7 Field device integration Part 7: Communication DevicesAccepted
BS EN 65784-5-N Industrial communication networks - Profiles Part 5-n Installation of fieldbuses - Installation profiles for MECHATROLINKnull
BS EN ISO 11064-4 Ergonomic design of control centres Part 4: Layout and dimensions of workstationsApproval
BS EN ISO 9241-920 Ergonomics of human-system interaction Part 920: Guidance on tactile and haptic interactionsApproval
BS EN WI 00088331 Thermal insulation products for buildings - Factory made reflective insulation products (RI) - SpecificationIdea
BS EN WI 00156172 prEN 16211; Ventilation for buildings - Measurement of air flows on site - methodsIdea
BS EN WI 00350017 Sustainability of construction works - Assessment of economic performance of buildings - Calculation MethodsAccepted
BS ENISO 10819 Mechanical vibration and shock - Hand-arm vibration - Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the handApproval
BS ENISO 12570:2000/A1 Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperatureApproval
BS ENISO 12571 Hygrothermal performance of building materials and products - Determination of hygroscopic sorption propertiesApproval
BS ENISO 15758 'Hygrothermal performance of building equipment and industrial installations - Calculation of water vapour diffusion - Cold pipe insulation systemsPublic Comment
BS ENISO 16484-7 Building automation and control systems Part 7: BACS contribution on the energy efficiency of buildingsIdea
Opens a new windowBS ENISO 6781-3 Performance of buildings - Detection of heat, air and moisture irregularities in buildings by infrared methods Part 3: Qualifications of Equipment Operators, Data Analysts and Report WritersPublic Comment
BS ENISO 7345:1995/A1 Thermal insulation - Physical quantities and definitions (ISO 7345:1987)Accepted
BS ENISO 9241-391 Ergonomics of Human System Interaction Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizuresPublic Comment
Opens a new windowBS ENISO 9972 Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization methodPublic Comment
BS IEC 62740/Ed1: Root Cause Analysis (RCA)Accepted
BS ISO 10077-2 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance Part 2: Numerical method for framesAccepted
BS ISO 10916 Calculation of availability of daylight in buildingsPublic Comment
BS ISO 12006-2 Building construction - Organization of information about construction works Part 2: Framework for classification of informationAccepted
BS ISO 12574-2 Thermal insulation— Cellulose-fibre loose-fill for horizontal applications in ventilated roof spaces— Part 2 : Principal responsibilities of installersApproval
BS ISO 13105-1 Building construction machinery and equipment - Concrete floating machines (power trowels) Part 1: TerminologyIdea
BS ISO 13105-2 Building construction machinery and equipment - Concrete floating machines (power trowels) Part 2: SafetyIdea
BS ISO 13612-1 Heating and cooling systems in buildings - Method for calculation of the system performance and system design for heat pump systems Part 1: Design and dimensioningPublic Comment
BS ISO 13612-2 Heating and cooling systems in buildings - Method for calculation of the system performance and system design for heat pump systems Part 2: Energy calculationPublic Comment
BS ISO 13675 Heating systems in buildings - Method for calculation of the system performance and system design - Combustion systems (boilers)Public Comment
BS ISO 15645:2002/AMD 1 Road construction and maintenance equipment - Road milling machinery - Terminology and commercial specificationsPublication
BS ISO 15686-5 Buildings and constructed assets - Service-life planning Part 5: Life-cycle costingIdea
BS ISO 15686-7 Buildings and constructed assets - Service life planning Part 7: Performance evaluation for feedback of service life data from practiceIdea
BS ISO 16039:2004/AMD 1 Road construction and maintenance equipment - Slipform pavers - Definitions and commercial specificationsPublication
BS ISO 16737 Fire safety engineering - Requirements governing algebraic equations - Vent flowsPublication
BS ISO 16745-1 Environmental performance of buildings - Carbon Metric of a building Part 1: Use stageAccepted
BS ISO 16757-1 Product Data for Building Services Plant ModelsAccepted
BS ISO 17798 Building information model (BIM) applications for building automation and control systemsIdea
BS ISO 17800 Facility Smart Grid Information ModelAccepted
BS ISO 18480-1 Facility Management Part 1: Terms and definitionsIdea
BS ISO 18480-2 Facility Management Part 2: Guidance on how to prepare Facility Management agreementsIdea
BS ISO 20283-4:2012/Amd 1 Mechanical vibration - Measurement of vibration on ships Part 4: Measurement and evaluation of vibration of the ship propulsion machinery - Amendment 1Public Comment
BS ISO 21873-1 Building construction machinery and equipment - Mobile crushers Part 1: Terminology and commercial specificationsAccepted
BS ISO 21929-2 Sustainability in building construction - Sustainability indicators Part 2: Framework for the development of indicators for civil engineering worksPublic Comment
BS ISO 22242:2005/AMD 1 Road construction and road maintenance machinery and equipment - Basic types - Identification and descriptionPublication
BS ISO 29481-1 Building information modelling - Information delivery manual Part 1: Methodology and formatIdea
BS ISO 29481-3 Building information modelling - Information delivery manual Part 3: Model View DefinitionsIdea
BS ISO 37120 Communities Sustainable Development and Resilience - Global City Indicators for City Services and Quality of LifePublic Comment
BS ISO 6707-1 Building and civil engineering - Vocabulary Part 1: General termsPublic Comment
BS ISO 6707-2 Building and civil engineering - Vocabulary Part 2: Contract termsPublic Comment
BS ISO 9241-161 Ergonomics of human-system interaction Part 161: User-interface elementsIdea
BS ISO 9241-220 Ergonomics of human-computer interaction Part 220: Processes for enabling, executing and assessing human-centred design within organizationsAccepted
BS ISO 9241-392 Ergonomics of human-system interaction Part 392: Ergonomic requirements for the reduction of visual fatigue from stereoscopic imagesAccepted
BS ISO 9241-940 Ergonomics of human-system interaction Part 940: Evaluation of tactile and haptic interactionsAccepted
BS ISO 9241-960 Ergonomics of human-system interaction Part 960: Framework and guidance for gesture interactionsIdea
BS8895-1 Designing for material efficiency in building projects Part 1: Code of practice for appraisal and strategic briefingApproval
PD CEN ISO/TR 9241-331 Ergonomics of human-system interaction Part 331: Optical characteristics of autostereoscopic displaysApproval
PD CEN/TR 15615 Explanation of the general relationship between various European standards and the Energy Performance of Buildings Directive (EPBD) - Umbrella DocumentAccepted
PD CEN/TR WI 00156171 Basic data used to produce EN 14240:2004, Ventilation for buildings - Chilled ceilings - Testing and rating AND, EN 14518:2005, Ventilation for buildings - Chilled beams - Testing and rating of passive chlled beamsIdea
PD CEN/TS 16628 Energy Performance of Buildings - Basic Principles for the set of EPBD standardsAccepted
PD CEN/TS 16629 Energy Performance of Buildings - Detailed Technical Rules for the set of EPB-standardsAccepted
PD IEC/TR 61158-1:2009 ED 2.0/A1+A1 Industrial communication networks- Fieldbus specifications Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series Amendment 1null
PD IEC/TR 62453-41 FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION Part 41: Object model integration profile - Common object modelAccepted
PD IEC/TR 62453-42 FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION Part 42: Object model integration profile - Common Language InfrastructureAccepted
PD IEC/TR 62795 Interoperation Specifications of FDT/DTM and EDDLApproval
PD IEC/TS 62657 Industrial communication networks – Wireless communication network and communication profiles – Coexistencenull
PD IEC/TS 62657-1 Industrial Communication Networks – Wireless Communication Network Part 1: Wireless communication requirements and spectrum considerationsAccepted
PD ISO 15686-4 Building Construction - Service Life Planning Part 4: Service Life Planning using IFC based Building Information ModellingPublic Comment
PD ISO/TR 10796-2 Fire safety engineering Part 2: Example on the application of IS 16730 to the assessment, verification and validation of a CFD modelAccepted
PD ISO/TR 10796-3 Fire safety engineering Part 3: Example on the application of IS 16730 to the assessment, verification and validation of a structural modelAccepted
PD ISO/TR 10796-4 Fire safety engineering Part 4: Example on the application of IS 16730 to the assessment, verification and validation of an egress modelAccepted
PD ISO/TR 15686-11 Buildings and Constructed Assets - Service Life Planning Part 11: TerminologyAccepted
PD ISO/TR 16730-2 Fire safety engineering - Assessment, verification and validation of calculation methodsApproval
PD ISO/TR 16732-2 - Fire risk assessment Part 2: Example of an office buildingApproval
PD ISO/TR 16732-3 Fire safety engineering - Fire risk assessment Part 3: Example of an industrial propertyApproval
PD ISO/TR 21932 Building construction - Sustainability in building construction - TerminologyIdea
PD ISO/TR 24679-3 Fire safety Engineering - Performance of structure in fire Part 3: Example of an open car parkAccepted
PD ISO/TR 9241-1 Ergonomics of human-system interaction Part 1: Introduction to the ISO 9241 seriesIdea
PD ISO/TS 12720 Sustainability in buildings and civil engineering works - Guidelines for the application of the general principles on sustainabilityAccepted
PD ISO/TS 13447 Fire Safety Engineering - Guidance for use of zone fire modelsApproval
PD ISO/TS 20282-2 Usability of consumer products and products for public use Part 2: Summative test methodApproval

[ back to top ]

Published standards (108)

Sort by: Reference | Title | Status

Standard referenceNameStatus
PD 7974-0:2002Application of fire safety engineering principles to the design of buildings - Guide to design framework and fire safety engineering proceduresCurrent
PD 7974-1:2003Application of fire safety engineering principles to the design of buildings - Initiation and development of fire within the enclosure of origin (Sub-system 1)Current
PD 7974-2:2002Application of fire safety engineering principles to the design of buildings - Spread of smoke and toxic gases within and beyond the enclosure of origin (Sub-system 2)Current
PD 7974-3:2003Application of fire safety engineering principles to the design of buildings - Structural response and fire spread beyond the enclosure of origin (Sub-system 3)Withdrawn
PD 7974-5:2002Application of fire safety engineering principles to the design of buildings - Fire service intervention. (Sub-system 5)Current
PD 7974-7:2003Application of fire safety engineering principles to the design of buildings - Probabilistic risk assessmentCurrent
PD 7974-3:2011Application of fire safety engineering principles to the design of buildings - Structural response and fire spread beyond the enclosure of origin Current
PD 7974-8:2012Application of fire safety engineering principles to the design of buildings - Property protection, business and mission continuity, and resilienceCurrent
BS 7974:2001Application of fire safety engineering principles to the design of buildings. Code of practiceCurrent
BS 6100-2:2007Building and civil engineering. Vocabulary - Spaces, building types, environment and physical planningCurrent
BS EN ISO 16484-5:2008+A1:2009Building automation and control systems - Data communication protocolWithdrawn
BS EN ISO 16484-5:2012Building automation and control systems - Data communication protocolCurrent
BS EN ISO 16484-5:2010Building automation and control systems - Data communication protocolWithdrawn
BS EN ISO 16484-5:2003Building automation and control systems - Data communication protocolWithdrawn
BS EN ISO 16484-6:2005Building automation and control systems (BACS) - Data communication conformance testingWithdrawn
BS EN ISO 16484-1:2010Building automation and control systems (BACS) - Project specification and implementationCurrent
BS EN ISO 16484-6:2009Building automation and control systems (BACS) - Data communication conformance testingCurrent
BS 7643-1:1993Building construction. Expression of users' requirements - Thermal requirementsCurrent
BS 7643-3:1993Building construction. Expression of users' requirements - Acoustical requirementsCurrent
BS ISO 16818:2008Building environment design. Energy efficiency. TerminologyCurrent
BS ISO 16814:2008Building environment design. Indoor air quality. Methods of expressing the quality of indoor air for human occupancyCurrent
BS ISO 16817:2012Building environment design. Indoor environment. Design process for visual environmentCurrent
BS 5964-3:1996Building setting out and measurement - Check-lists for the procurement of surveys and measurement servicesCurrent
BS 5964-2:1996Building setting out and measurement - Measuring stations and targetsCurrent
BS 5964-1:1990Building setting out and measurement - Methods of measuring, planning and organization and acceptance criteriaCurrent
BS 7307-2:1990Building tolerances. Measurement of buildings and building products - Position of measuring pointsCurrent
BS ISO 11863:2011Buildings and building-related facilities. Functional and user requirements and performance. Tools for assessment and comparisonCurrent
BS ISO 15686-1:2011Buildings and constructed assets. Service life planning - General principles and frameworkCurrent
BS ISO 15686-2:2012Buildings and constructed assets. Service life planning - Service life prediction procedures Current
BS ISO 15686-5:2008Buildings and constructed assets. Service life planning - Life cycle costingCurrent
BS ISO 15686-10:2010Buildings and constructed assets. Service life planning - When to assess functional performanceCurrent
BS ISO 15686-6:2004Buildings and constructed assets. Service life planning - Procedures for considering environmental impactsCurrent
BS ISO 15686-1:2000Buildings and constructed assets. Service life planning - General principlesWithdrawn
BS ISO 15686-3:2002Buildings and constructed assets. Service life planning - Performance audits and reviewsCurrent
BS ISO 15686-2:2001Buildings and constructed assets. Service life planning - Service life prediction proceduresWithdrawn
BS ISO 15686-7:2006Buildings and constructed assets. Service life planning - Performance evaluation for feedback of service life data from practiceCurrent
BS ISO 15686-8:2008Buildings and constructed assets. Service-life planning - Reference service life and service-life estimationCurrent
DD ISO/TS 15686-9:2008Buildings and constructed assets. Service-life planning - Guidance on assessment of service life dataCurrent
BS 5810:1979Code of practice for access for the disabled to buildingsWithdrawn
BS 6270-1:1982Code of practice for cleaning and surface repair of buildings - Natural stone, cast stone and clay and calcium silicate brick masonryWithdrawn
BS 6270-3:1991Code of practice for cleaning and surface repair of buildings - Metals (cleaning only)Current
BS 8221-1:2000Code of practice for cleaning and surface repair of buildings - Cleaning of natural stones, brick, terracotta and concreteWithdrawn
BS 8221-2:2000Code of practice for cleaning and surface repair of buildings - Surface repair of natural stones, brick and terracottaCurrent
BS 8221-1:2012Code of practice for cleaning and surface repair of buildings - Cleaning of natural stone, brick, terracotta and concreteCurrent
BS 5250:1989Code of practice for control of condensation in buildingsWithdrawn
BS 8200:1985Code of practice for design of non-loadbearing external vertical enclosures of buildingsWithdrawn
BS 8207:1985Code of practice for energy efficiency in buildingsWithdrawn
DD 9999:2005Code of practice for fire safety in the design, construction and use of buildingsWithdrawn
BS 9999:2008Code of practice for fire safety in the design, management and use of buildingsCurrent
BS EN 15331:2011Criteria for design, management and control of maintenance services for buildingsCurrent
Energy design guide:1985Design guide to BS 8207:1985, British Standard code of practice for energy efficiency in buildingsWithdrawn
DD 266:2007Design of accessible housing. Lifetime home. Code of practiceCurrent, Work in Hand
BS 8300:2009+A1:2010Design of buildings and their approaches to meet the needs of disabled people. Code of practiceCurrent
BS 8300:2001Design of buildings and their approaches to meet the needs of disabled people. Code of practiceWithdrawn
BS EN 15217:2007Energy performance of buildings. Methods for expressing energy performance and for energy certification of buildingsCurrent
BS EN 1993-1-4:2006Eurocode 3. Design of steel structures - General rules - Supplementary rules for stainless steelsCurrent
BS 7385-1:1990Evaluation and measurement for vibration in buildings - Guide for measurement of vibrations and evaluation of their effects on buildingsWithdrawn
BS 7385-2:1993Evaluation and measurement for vibration in buildings - Guide to damage levels from groundborne vibrationCurrent
DD ENV 1090-1:1998Execution of steel structures - General rules and rules for buildings (together with United Kingdom national application document)Withdrawn
BS EN 15221-1:2006Facility management - Terms and definitionsCurrent
BS EN 15221-2:2006Facility management - Guidance on how to prepare facility management agreementsCurrent
BS 8536:2010Facility management briefing. Code of practiceCurrent
BS 5588-4:1998Fire precautions in the design, construction and use of buildings - Code of practice for smoke control using pressure differentialsWithdrawn
BS 5588-5:2004Fire precautions in the design, construction and use of buildings - Access and facilities for fire-fightingWithdrawn
BS 5588-0:1996Fire precautions in the design, construction and use of buildings - Guide to fire safety codes of practice for particular premises/applicationsWithdrawn
BS 5588-12:2004Fire precautions in the design, construction and use of buildings - Managing fire safetyWithdrawn
BS 5588-8:1988Fire precautions in the design, construction and use of buildings - Code of practice for means of escape for disabled peopleWithdrawn
BS 5588-4:1978Fire precautions in the design, construction and use of buildings - Code of practice for smoke control in protected escape routes using pressurizationWithdrawn
BS ISO 13153:2012Framework of the design process for energy-saving single-family residential and small commercial buildingsCurrent
BS 6953:1988Glossary of terms for procedures for setting out, measurement and surveying in building construction (including guidance notes)Current
PD 6612:2004Guidance on the preparation of codes of practice for buildingCurrent
PD 6612:1997Guidance on the preparation of codes of practice for buildingWithdrawn
BS 8210:1986Guide to building maintenance managementWithdrawn
BS 4467:1991Guide to dimensions in designing for elderly peopleCurrent
BS 7543:2003Guide to durability of buildings and building elements, products and componentsCurrent
BS 6472:1992Guide to evaluation of human exposure to vibration in buildings (1 Hz to 80 Hz)Withdrawn
BS 6611:1985Guide to evaluation of the response of occupants of fixed structures, especially buildings and offshore structures, to low-frequency horizontal motion (0.063 Hz to 1 Hz)Current
BS 8210:2012Guide to facilities maintenance managementCurrent
BS 8587:2012Guide to facility information managementCurrent
BS ISO 15928-1:2003Houses. Description of performance - Structural safetyCurrent
BS ISO 15928-2:2005Houses. Description of performance - Structural serviceabilityCurrent
PD 6523:1989Information on access to and movement within and around buildings and on certain facilities for disabled peopleObsolescent
BS 7334-3:1990Measuring instruments for building construction - Methods for determining accuracy in use: optical levelling instrumentsCurrent
BS 7334-2:1990Measuring instruments for building construction - Methods for determining accuracy in use: measuring tapesWithdrawn
BS 7334-1:1990Measuring instruments for building construction - Methods for determining accuracy in use: theoryCurrent
BS 7334-5:1992Measuring instruments for building construction - Methods for determining accuracy in use of optical plumbing instrumentsCurrent
BS 7334-6:1992Measuring instruments for building construction - Methods for determining accuracy in use of laser instrumentsWithdrawn
BS 7334-7:1992Measuring instruments for building construction - Methods for determining accuracy in use of instruments when used for setting outWithdrawn
BS 7334-4:1992Measuring instruments for building construction - Methods for determining accuracy in use of theodolitesCurrent
BS 7334-8:1992Measuring instruments for building construction - Methods for determining accuracy in use of electronic distance-measuring instruments up to 150 mCurrent
BS 7832:1995Performance standards in building. Checklist for briefing. Contents of brief for building designCurrent
BS 7642:1993Performance standards in building. Contents and format of standards for evaluation of performanceCurrent
BS 7641:1993Performance standards in building. Definition and calculation of area and space indicatorsWithdrawn
BS ISO 9836:2011Performance standards in building. Definition and calculation of area and space indicatorsCurrent
BS 6019:1980Recommendations for performance standards in building. Contents and presentationCurrent
PD 156865:2008Standardized method of life cycle costing for construction procurement. A supplement to BS ISO 15686-5. Buildings and constructed assets. Service life planning. Life cycle costingCurrent
BS ISO 21930:2007Sustainability in building construction. Environmental declaration of building productsWithdrawn
BS ISO 21931-1:2010Sustainability in building construction. Framework for methods of assessment of the environmental performance of construction works - BuildingsWithdrawn
BS ISO 15392:2008Sustainability in building construction. General principlesCurrent
BS EN 15643-4:2012Sustainability of construction works. Assessment of buildings - Framework for the assessment of economic performanceCurrent
BS EN 15643-2:2011Sustainability of construction works. Assessment of buildings - Framework for the assessment of environmental performanceCurrent
BS EN 15643-3:2012Sustainability of construction works. Assessment of buildings - Framework for the assessment of social performanceCurrent
BS EN 15643-1:2010Sustainability of construction works. Sustainability assessment of buildings - General frameworkCurrent
PD 7974-6:2004The application of fire safety engineering priciples to fire safety design of buildings - Human factors. Life safety strategies. Occupant evacuation, behaviour and condition (Sub-system 6)Current
BS 6954-2:1988Tolerances for building - Recommendations for statistical basis for predicting fit between components having a normal distribution of sizesCurrent
BS 6954-3:1988Tolerances for building - Recommendations for selecting target size and predicting fitCurrent
BS 6954-1:1988Tolerances for building - Recommendations for basic principles for evaluation and specificationCurrent
NA to BS EN 1993-1-4:2006UK National Annex to Eurocode 3. Design of steel structures - General rules - Supplementary rules for stainless steelsCurrent

[ back to top ]

Committees (28)

Sort by: Reference | Name

Committee ReferenceTitle
B/559Access to buildings for disabled people
PH/9Applied ergonomics
CB/101/-/2Basic Data - Terminology
B/540/2Building performance - Energy
B/560Conservation of tangible cultural heritage
B/555Construction design, modelling and data exchange
B/513Construction equipment and plant and site safety
DS/1Dependability
CB/203Design & execution of steel structures
CB/10Design Advisory Committee
B/554Dimensions and Accuracy - Building construction
B/540Energy performance of materials components and buildings
FMW/1Facilities management
FSH/14Fire precautions in buildings
FSH/24Fire safety engineering
B/209General building codes
AMT/7Industrial communications: process measurement and control, including fieldbus
B/565Landscape operations
GME/21/6Mechanical vibration, shock and condition monitoring - Human exposure to mechanical vibration and shock
GME/21/6/4Mechanical vibration, shock and condition monitoring - Human exposure to mechanical vibration and shock - Human exposure to vibration and shock in buildings and structures
GME/21/3Mechanical vibration, shock and condition monitoring - Measurement and evaluation of mechanical vibration and shock in stationary structures
RHE/16Performance requirements for control systems
CB/101Service Life Planning
FSH/25Smoke, heat control systems and components
B/204Structural design of low rise buildings
B/558Sustainability of construction works
SDS/1/4Sustainable Communities
RHE/2Ventilation for buildings, heating and hot water services

[ back to top ]

Recently Viewed
Need Help?

We are here to help you with any queries. Email us for help.

But first, why not view the Help Pages?