Skip to content
RSS feed for this category

Barrels, drums & canisters

Standards in development (144)

Sort by: Title | Status

Standard TitleStatus
BS EN 12674-4 Roll containers Part 4: Performance requirementsApproval
BS EN 15628 Maintenance - Qualification of maintenance personnelApproval
BS EN 16487 Acoustics - Test code for suspended ceilings Part 1: Sound absorptionPublication
BS EN 16646 Maintenance within physical asset managementApproval
BS EN 16703 Acoustics - Test code for drywall systems of plasterboard with steel studs - Airborne sound insulationPublic Comment
BS EN 50117-4-2 Coaxial cables Part 4-2: Sectional specification for CATV cables up to 6 GHz used in cables distribution networksIdea
BS EN 50288-10-2 Multi-element metallic cables used in analogue and digital communication and control Part 10-2: Sectional specification for screened cables characterized from 1 MHz up to 500 MHz - Horizontal and building backbone cablesPublic Comment
BS EN 50288-11-2 Multi-element metallic cables used in analogue and digital communication and control Sectional specification for un-screened cables, characterized from 1 MHz up to 500 MHz - Horizontal and building backbone cablesPublic Comment
BS EN 50288-9-2 Multi-element metallic cables used in analogue and digital communication and control Part 9-2: Sectional specification for screened cables characterised from 1 MHz uo to 1000 MHz - Work area, patch cord and data centre cablesPublic Comment
BS EN 50289-1-17 Communications cables – Specifications for test methods Part 1-17: Electrical test methods – Exogenous Crosstalk ExNEXT and ExFEXTAccepted
BS EN 50290-2-21:2001+A1:2007+Corr Common design rules and construction. PVC insulation compoundsnull
BS EN 50290-2-33 Communication cables Part 2-33: Common design rules and construction - Polyethylene for multi element metallic data cables for indoor applicationIdea
BS EN 50290-2-37 Communication cables Part 2-37: Common design rules and construction - Polyethylene insulation for coaxial cablesIdea
BS EN 50290-2-38 Communication cables Part 2-38: Common design rules and construction - Polypropylene insulation for coaxial cablesIdea
BS EN 50290-4-1 Ed.2 prEN 50290-4-1 ed.2 : Communication cables Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspectsApproval
BS EN 50290-4-2 Ed.2 prEN 50290-4-2 ed.2 : Communication cables Part 4-2: General considerations for the use of cables - Guide to useApproval
BS EN 50607 Satellite signal distribution over a single coaxial cable - Second generationAccepted
BS EN 50882-11 Multi-element metalic cables used in analogue and digital communication and control Part 11: Sectional specification for un-screened cables, characterised up to 500 MHz, for horizontal and building backbone wiringPublic Comment
BS EN 60096-0-1 Ed.3 Amd 1 Radio frequency cables Part 0-1: Guide to the design of detail specifications - Coaxial cables, Amendment 1null
BS EN 60153-1 HOLLOW METALLIC WAVEGUIDES Part 1: General requirements and measuring methodsPublic Comment
BS EN 60153-2 Ed 3.0 HOLLOW METALLIC WAVEGUIDES Part 2: Relevant specifications for ordinary rectangular waveguidesPublic Comment
BS EN 60154-1 Ed 3.0 FLANGES FOR WAVEGUIDES Part 1: General requirementsPublic Comment
BS EN 60154-2 Ed 3.0 FLANGES FOR WAVEGUIDES Part 2: Relevant specifications for flanges for ordinary rectangular waveguidesPublic Comment
BS EN 60300-3-10 Ed 2.0 Dependability management Part 3-10: Application guide - Maintainability and supportabilityAccepted
BS EN 60300-3-3 Dependability management Part 3-3: Application guide - Life cycle costingAccepted
BS EN 60728-11 Ed 4.0 Cable networks for television signals; sound signals and interactive services Part 11: SafetyAccepted
BS EN 60728-5 Ed 3.0 Cable networks for television signals; sound signals and interactive services Part 5: Headend equipmentPublic Comment
BS EN 60728-7-1 Ed 1.0 /A1 Amendment 1 - Cable networks for television signals; sound signals and interactive services Part 7-1: Hybrid Fibre Coax Outside Plant Status Monitoring - Physical (PHY) Layer SpecificationApproval
BS EN 60812 Ed 3.0 Failure Mode and Effects analysis (FMEA)Accepted
BS EN 60966-1 Ed.3 Cables, wires, waveguides, r.f. connectors, and accessories for communication and signallingPublic Comment
BS EN 60966-2-4 Ed 4 Detail specification for cable assebmblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz, IEC 61196-2 connectorsPublic Comment
BS EN 60966-2-5 Ed 4 Detail specification for cable assebmblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz, IEC 61196-2 connectorsPublic Comment
BS EN 60966-2-6 Ed 4 Detail specification for cable assebmblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz, IEC 61196-24 connectorsPublic Comment
BS EN 60966-2-7 ED.1 Radio frequency and coaxial cable assemblies Part 2-7: Detail specification for cable assemblies for radio and TV recievers - Frequency range 0 MHz to 3000 MHz, IEC 61169-47 connectorsPublication
BS EN 61014 Programmes for reliability growthAccepted
BS EN 61078 Ed 3.0 Analysis techniques for dependability - Reliability block diagram and Boolean methodsAccepted
BS EN 61156-10 Ed1.0 pair/quad cables for digitial communications Part 10: Cables for work area wiring with transmission characteristics up to 2 GHz - Sectional specificationPublic Comment
BS EN 61156-9 Ed1.0 pair/quad cables for digitial communications Part 9: Cables for horizontal floor wiring with transmission characteristics up to 2 GHz - Sectional specificationPublic Comment
BS EN 61169-11 Radio-frequency connectors Part 11: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9.5 mm with threaded coupling - characteristic impedance 50 ohm (Type 4.1-9.5)Accepted
BS EN 61169-47 Ed 2.0 Radio-Frequency Connectors Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 ? cable networks (type F- Quick)Public Comment
BS EN 61169-48 Ed.1 Radio-frequency connectors - Part 48: Sectional specification for BMP Series Blind mating R.F. coaxial connectorsPublication
BS EN 61169-49 Ed 1.0 Radio-frequency connectors - Part 49: Sectional specification for SMAA series R.F connectorsPublication
BS EN 61169-50 Ed1.0 Radio-frequency connectors Part 50: Sectional specifications RF coaxial connectors with inner diameter of outer conductors 4.11 mm with quick lock system. Characteristics impendance 50 Ohm (type QMA)Publication
BS EN 61169-51 Ed1.0 Radio-frequency connectors - Part 51: Sectional specifications RF coaxial connectors with inner diameter of outer conductors 13.5 mm with bayonet lock characteristics impedamce 50 Ohm (type QLI)Approval
BS EN 61169-52 Ed1.0 Radio- Frequency Connectors Part 52: Sectional specification for series MMCX RF coaxial connectorsPublic Comment
BS EN 61169-53 Radio-frequency connectors Part 53: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 16 mm with screw lock -Characteristic impedance 50 ohm (Type S7-16)Accepted
BS EN 61169-54 RADIO-FREQUENCY CONNECTORS Part 54: Sectional Specification for Coaxial Connectors with 10mm inner of outer Conductor,nominal Characteristic Impedance 50 Ohms, Series 4.3- 10Public Comment
BS EN 61169-58 Radio-frequency connectors Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - characteristic impedance 50 ohm (type SBMA)Accepted
BS EN 61196-1-110 Ed. 1.0 Coaxial communication cables Part 1-110: Electrical test methods - Test for continuityIdea
BS EN 61196-1-114 Ed. 1.0 Coaxial communication cables Part 1-114: Electrical test methods - InductancePublic Comment
BS EN 61196-1-116 Ed. 1.0 Coaxial communication cables Part 1-116: Electrical test methods - Test for characteristic impedance with time domain reflectometry (TDR)Public Comment
BS EN 61196-1-209 Ed. 1.0 Coaxial communication cables Part 1-209: Environmental test methods - Thermal cyclingAccepted
BS EN 61196-1-215 Ed1.0 Environmental test methods Part 1-215: High Temperature Cable AgeingAccepted
BS EN 61196-10-1 Ed1.0 Coaxial Communication Cables Part 10-1: Blank detail specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectricPublication
BS EN 61196-11 Ed1.0 Coaxial communication cables Part 11: Sectional specification for semi-rigid cables with polyethylene (PE) dielectricPublic Comment
BS EN 61196-11-1 Ed.1 Coaxial communication cables Part 11-1: Blank detail specification for semi-rigid cables with polyethylene (PE) dielectricPublic Comment
BS EN 61196-4-1 Ed1.0 Coaxial communication cables Part 4-1: Blank detail specification for radiating cablesPublic Comment
BS EN 61196-9-1 Ed. 1.0 Coaxial communication cables Part 9-1: Blank detail specification for flexible RF coaxial cablesPublic Comment
BS EN 61703 Ed 2.0 Mathematical expressions for reliability; availability; maintainability and maintenance support termsAccepted
BS EN 61709 Ed 3.0 Electric components - Reliability - Reference conditions for failure rates and stress models for conversionAccepted
BS EN 61726 ED.2 Cable assemblies, cables, connectors and passive coponents - screening attentuation measurement by the reverberation chamber methodPublic Comment
BS EN 61882 Ed 2.0 Hazard and operability studies (HAZOP studies) - Application guideAccepted
BS EN 61935-1 Ed.4 TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH ISO/IEC 11801 Part 1: Installed cablingPublic Comment
BS EN 61935-2-21 Ed.1 Generic cabling systems — Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-21: Cord and work area cord category 6- Blank detail specificationPublic Comment
BS EN 61935-2-22 Ed.1 Generic cabling systems — Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-22: Cord and work area cord category 6A- Blank detail specificationPublic Comment
BS EN 61935-2-23 Ed.1 Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-23: Cord and work area cord category 7- Blank detail specificationPublic Comment
BS EN 61935-2-24 Ed.1 Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-24: Cord and work area cord category 7A- Blank detail specificationPublic Comment
BS EN 61935-2-25 Ed1.0 Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-25: Work area with M12 4 poles connectors Blank detail specificationPublic Comment
BS EN 62153-4-10 Ed2 Metallic Communication Cable Test Methods Part 4-10: Electromagnetic compatability (EMC) - Shielded screening attenuation test method for measuring the screening effectiveness of feed-throughs and electromagnetic gaskets double coaxial methodPublic Comment
BS EN 62153-4-7 Ed.2 Metallic Communication Cable test methods Part 4-7: Electromagnetic compatibility (EMC) - Shielded screening attenuation test method for measuring the Transfer impedance Zt and the screening attenuation aS or the Coupling attenuation aC of RF-Connectors and assemblies up to and above 3 GHz; Tube in Tube methodPublic Comment
BS EN 62550 Spare parts provisioningAccepted
BS EN 62550 Spare Parts ProvisioningAccepted
BS EN 62740 Root Cause Analysis (RCA)Approval
BS EN 62741 Guide to the demonstration of dependability requirements. The dependability caseApproval
BS EN 62783-1Ed.1 TWINAX CABLES FOR DIGITAL COMMUNICATIONS - Part 1: GENERIC SPECIFICATIONPublic Comment
BS EN 62810 Ed.1 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rodsPublic Comment
BS ENISO 10140-1 Acoustics - Laboratory measurement of sound insulation of building elements Part 1: Application rules for specific productsPublic Comment
BS ENISO 10140-3:2010/Amd 1 measurement of sound insulation of building elements Part 3: Measurement of impact sound insulation - Amendment 1Approval
BS ENISO 10140-3:2010/Amd 3 Acoustics - Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulation - Amendment 3Approval
BS ENISO 13355 Packaging - Complete, filled transport packages and unit loads - Vertical random vibration testAccepted
BS ENISO 16283-2 Acoustics - Field measurement of sound insulation in buildings and of building elements Part 2: Impact sound insulationApproval
BS ENISO 16283-3 insulation in buildings and of building elements Part 3: Façade sound insulationPublic Comment
BS ENISO 1680:1999/A1 Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machinesApproval
BS ENISO 1683 acoustical and vibratory levelsApproval
BS ENISO 3743-2:1994/Amd 1 sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms - Amendment 1Technical Review
BS ENISO 6926 Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levelsPublic Comment
BS ENISO 717-1:2013+COR1null
Opens a new windowBS ENISO 780 Packaging - Pictorial marking for handling of goodsPublic Comment
BS ENISO 9295 Acoustics - Measurement of high-frequency noise emitted by computer and business equipmentApproval
BS IEC 60050-692 International Electrotechnical Vocabulary Part 692: Electric power systems: dependability and quality of serviceIdea
BS IEC 60050-726 Ed2.0 IEC 60050-726. International electrotechnical vocabulary. Transmissionlines and waveguidesPublic Comment
BS IEC 62153-4-15 Ed.1 Metallic Communication Cable test methods Part 4-15: Electromagnetic compatibility (EMC) – Test method for measuring transfer impedance and screening attenuation – or coupling attenuation with Triaxial CellPublic Comment
BS ISO 14163 Acoustics - Guidelines for noise control by silencersPublic Comment
BS ISO 14835-1:2005/Amd 1 Mechanical vibration and shock - Cold provocation tests for the assessment of peripheral vascular function Part 1: Measurement and evaluation of finger skin temperature - Amendment 1Accepted
BS ISO 15106-5 Plastics - Film and sheeting - Determination of water vapour transmission rate Part 5: Presssure sensor methodPublic Comment
BS ISO 15106-6 Plastics - Film and sheeting - Determination of water vapour transmission rate Part 6: Atmospheric pressure ionization mass spectrometer methodPublic Comment
BS ISO 15106-7 Plastics - Film and sheeting - Determination of water vapour transmission rate Part 7: Calcium corrosion methodPublic Comment
BS ISO 15394 Packaging - Bar code and two-dimensional symbols for shipping, transport and receiving labelsPublic Comment
BS ISO 16616 Test methods for wood-plastic composite (WPC) deck boardsPublic Comment
BS ISO 17451-1 Alphanumeric Codification of Inventories for Shipments of Household Goods and Personal Effects Shipments Part 1: Titre manqueAccepted
BS ISO 17497-1:2004/Amd 1 Acoustics - Sound-scattering properties of surfaces Part 1: Measurement of the random-incidence scattering coefficient in a reverberation room - Amendment 1Publication
BS ISO 18188 Plastic straws for food - SpecificationAccepted
BS ISO 18574 Internet of Things (IoT) in the supply chain - Containerized cargoIdea
BS ISO 18575 Internet of Things (IoT) in the supply chain - Products & product packagesIdea
BS ISO 18576 Internet of Things (IoT) in the supply chain - Returnable transport items (RTIs)Idea
BS ISO 18577 Internet of Things (IoT) in the supply chain - Transport unitsIdea
BS ISO 18616-1 Returnable transport system - Reusable, rigid plastics distribution boxes Part 1: General purpose applicationAccepted
BS ISO 18616-2 Returnable transport system - Reusable, rigid plastics distribution boxes Part 2: General specifications for testingAccepted
BS ISO 19209 Adhesives - Thermoplastic wood adhesives for non-structural applications - ClassificationAccepted
BS ISO 19210 Adhesives - Thermoplastic wood adhesives for non-structural applications - Determination of tensile shear strength of lap jointsAccepted
BS ISO 19709-1 Packaging - Small load carrier systems Part 1: Common requirements and test methodsAccepted
BS ISO 19709-2 Packaging - Small Load Carrier Systems Part 2: Column Stackable System (CSS)Accepted
BS ISO 19709-3 Packaging Small Load Carrier Systems Part 3: Bond Stackable System (BSS)Accepted
BS ISO 2017-3 Mechanical vibration and shock - Resilient mounting systems - Part 3: Technical information to be exchanged for application of vibration isolation to new buildingsAccepted
BS ISO 21067-1 Packaging - Vocabulary Part 1: General termsPublic Comment
BS ISO 23560 Woven polypropylene sacks for bulk packaging of foodstuffsPublic Comment
BS ISO 2631-5 Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration Part 5: Method for evaluation of vibration containing multiple shocksAccepted
BS ISO 28219 Packaging - Labelling and direct product marking with linear bar code and two-dimensional symbolsPublic Comment
BS ISO 3740 Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standardsAccepted
BS ISO 3745:2012/Amd 1 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms - Amendment 1Accepted
BS ISO 389-7:2005/Amd 1 Acoustics - Reference zero for the calibration of audiometric equipment Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions - Amendment 1Accepted
BS ISO 4586-1 High-pressure decorative laminates - Sheets made from thermosetting resins Part 1: Classification and specificationsAccepted
BS ISO 4586-1 High-pressure decorative laminates - Sheets made from thermosetting resins Part 1: General informationAccepted
BS ISO 4586-2 High-pressure decorative laminates - Sheets made from thermosetting resins Part 2: Determination of propertiesAccepted
BS ISO 4586-2 High-pressure decorative laminates - Sheets made from thermosetting resins Part 2: Determination of propertiesAccepted
BS ISO 4586-3 High-pressure decorative laminates - Sheets made from thermosetting resins Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substratesAccepted
BS ISO 4586-4 High-pressure decorative laminates - Sheets made from thermosetting resins Part 4: Classification and specifications for compact laminates of thickness 2 mm and greaterAccepted
BS ISO 4586-5 High-pressure decorative laminates - Sheets made from thermosetting resins Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substratesAccepted
BS ISO 4586-6 High-pressure decorative laminates - Sheets made from thermosetting resins Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greaterAccepted
BS ISO 4586-7 High-pressure decorative laminates - Sheets made from thermosetting resins Part 7: Classification and specifications for design laminatesAccepted
BS ISO 4586-8 High-pressure decorative laminates - Sheets made from thermosetting resins Part 8: Classification and specifications for alternative core laminatesAccepted
BS ISO 532-1 Acoustics - Methods for calculating loudness Part 1: Zwicker methodAccepted
BS ISO 532-2 Acoustics - Methods for calculating loudness Part 2: Moore-Glasberg methodAccepted
BS ISO 6237 Adhesives - Wood-to-wood adhesive bonds - Determination of shear strength by tensile loadingPublic Comment
BS ISO 6383-1 Plastics - Film and sheeting - Determination of tear resistance Part 1: Trouser tear methodPublic Comment
BS ISO 8727:1997/Amd 1 Mechanical vibration and shock - Human exposure - Biodynamic coordinate systems - Amendment 1Public Comment
BS ISO 9296 Acoustics - Declared noise emission values of information technology and telecommunicationsPublic Comment
PD CLC/TS 50083-3-3 Cable networks for television signals, sound signals and interactive services - Part 3-3: Active wideband equipment for cable networks – Methods of measurement of the maximum operating output level in the return pathPublication
PD IEC/TR 61156-1-6 Ed1.0 pair/quad cables for digital communications Part 1-6: Exploratory DC-resistance values of floor-wiring and work-area cables for digital communicationsAccepted
PD IEC/TR 62153-4-16 Ed1.0 METALLIC COMMUNICATION CABLE TEST METHODS Part 4-16: Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-upApproval
PD IEC/TS 62153-4-1 Metallic communication cable test methods Part 4-1: Introduction to Electromagnetic (EMC) Test MethodsPublication
PD IEC/TS 62775 Ed 1.0 Dependability Management - Application guide - Dependability and Financial Processes for implementing Asset Management SystemsAccepted
PD ISO/TS 18614-1 Packaging - Label Material Part 1: Questions for Material DeterminationIdea
PD ISO/TS 18614-2 Packaging - Label Material Part 2: Specification of MaterialIdea

[ back to top ]

Published standards (45)

Sort by: Reference | Title | Status

Standard referenceNameStatus
PD 6467:1972Arrangement of vibration testerWithdrawn
BS EN 12710:2000Fibreboard drums. Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 lWithdrawn
BS EN 12710:2006Fibreboard drums. Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 lCurrent
BS EN 14768:2005Fibreboard drums. Removable head (open head) drums with slip on lids with a nominal capacity of 5 l to 600 lCurrent
BS EN 12928:2000Inserted flange type closure systems for steel drums with a total capacity of 17 l to 230 lWithdrawn
BS 814-1:1987Mild steel and tinplate drums (light duty: fixed ends) - Mild steel and tinplate drums (light duty: fixed ends). Specification for steel drums with a total capacity of 216.5 litresWithdrawn
BS 2003-1:1987Mild steel drums (light duty: removable heads) - Specification for drums with a total capacity of 213 litresWithdrawn
BS 1133-10.2:1991Packaging code. Metal containers - Metal drumsCurrent
BS 1133-7.4:1989Packaging code. Paper and board wrappers, bags and containers - Fibreboard drumsWithdrawn
BS EN 13025-1:2005Packaging. Light gauge metal containers - Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 mlCurrent
BS EN 13025-2:2005Packaging. Light gauge metal containers - Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 mlCurrent
BS EN 13025-3:2005Packaging. Light gauge metal containers - Removable head (open head) round steel and tinplate containers with a no minal capacity of 20000 ml, 25000 ml and 30000 mlCurrent
BS EN ISO 20848-2:2008Packaging. Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 lCurrent
BS EN ISO 20848-3:2008Packaging. Plastics drums - Plug/bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 lCurrent
BS EN ISO 20848-1:2008Packaging. Plastics drums - Removable head (open head) drums with a nominal capacity of 113,6 l to 220 lCurrent
BS EN ISO 15750-3:2008Packaging. Steel drums - Inserted flange-type closure systemsCurrent
BS EN ISO 15750-1:2008Packaging. Steel drums - Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 lCurrent
BS EN ISO 15750-2:2008Packaging. Steel drums - Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 lCurrent
BS EN ISO 16101:2004Packaging. Transport packaging for dangerous goods. Plastics compatibility testingWithdrawn
BS EN 12709:2000Plastic drums. Non-removable head (tight head) circular cross-section drums with a nominal capacity of 20 l to 120 lCurrent
BS EN 12707:2000Plastic drums. Non-removable head (tight head) drums with a nominal capacity of 210 l, 220 l and 225 lWithdrawn
BS 4839-1:1972Plastics containers - Containers up to 5 litres capacityWithdrawn
BS 4839-2:1974Plastics containers - Containers over 5 litres and up to 60 litres capacityWithdrawn
BS 4839-3:1992Plastics containers - Specification for closed head plastics drums over 70 L up to and including 250 L total capacityWithdrawn
BS EN 12707:2009Plastics drums. Non-removable head (tight head) drums with a nominal capacity of 210 l and 225 lCurrent
BS EN 12714:2000Plastics drums. Removable head (open head) drums with a nominal capacity of 25 L to 220 LWithdrawn
BS EN 12714:2009Plastics drums. Removable head (open head) drums with a nominal capacity of 25 L to 60 LCurrent
BS EN 12712:2000Plastics jerricans. Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm, 1000 mm x 1200 mm and 1140 mm x 1140 mmCurrent
BS ISO 13106:2014Plastics. Blow-moulded polypropylene containers for packaging of liquid foodstuffsCurrent
BS EN 12708:2000Plug/bung closure systems for plastics containers with a nominal capacity of 20 l to 225 lWithdrawn
BS EN 13972:2002Rigid plastic containers. Definition of nominal, brimful and total capacity and measurement of brimful and total capacityCurrent
BS EN 13973:2002Rigid plastics containers. Method for determination of drainabilityCurrent
BS EN 13974:2002Rigid plastics containers. Specification of tolerance for dimensions, weight and volumeCurrent
BS EN 12713:2000Screw cap closure systems for plastics containers with a nominal capacity of 20 L to 60 LCurrent
BS 1596:1992Specification for fibreboard drumsWithdrawn
BS 814:1974Specification for mild steel and tinplate drums (light duty: fixed ends)Withdrawn
BS 1702:1950Specification for mild steel drums (heavy duty - fixed ends)Current
BS 2003:1974Specification for mild steel drums (light duty: removable heads)Current
BS 5188:1990Specification for non-refillable metallic containers up to 1.4 litres capacity and 85 mm diameter for liquefied or compressed non-flammable gasesWithdrawn
PAS 1008:2014Specification for the performance and testing of a single-use flexitankCurrent
BS EN 210:2000Steel drums. Non-removable head (tight head) drums with a minimum total capacity of 216,5 lCurrent
BS EN 12711:2000Steel drums. Non-removable head (tight head) drums with a minimum total capacity of 230 lWithdrawn
BS EN 13007:2000Steel drums. Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 lCurrent
BS EN 209:2000Steel drums. Removable head (open head) drums with a minimum total capacity of 210 lCurrent
BS EN 13008:2000Steel drums. Removable head (open head) drums with a nominal capacity of 15 l to 62 lCurrent

[ back to top ]

Recently Viewed
Need Help?

We are here to help you with any queries. Email us for help.

But first, why not view the Help Pages?