BSI Corporate | Contact Us | Site Map | Help

Fuel systems

Parent Category: Road vehicles; internal combustion engines

Standards in development (174)
Published standards (88)
Committees (13)

Standards in development (174)

Standard Title	Status
BS 4250 Specification for commercial butane and commercial propane	null
BS EN 12252 LPG equipment and accessories - Equipping of LPG road tankers	Accepted
BS EN 12493 LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture	Approval
BS EN 13175 LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings	Technical Review
BS EN 13482 Rubber hoses and hose assemblies for asphalt and bitumen - Specification	Technical Review
BS EN 13483 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification	Approval
BS EN 1360 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification	Approval
BS EN 13776 LPG equipment and accessories - Filling and discharge procedures for LPG road tankers	Approval
BS EN 13953 LPG Equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)	Public Comment
BS EN 14071 LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment	Public Comment
BS EN 14129 LPG Equipment and accessories - Pressure relief valves for LPG pressure vessels	Technical Review
BS EN 14140 LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction	Public Comment
BS EN 14334 LPG equipment and accessories - Inspection and testing of LPG road tankers	Technical Review
BS EN 14420-1 Hose fittings with clamp units Part 1: Requirements, survey, designation and testing	Approval
BS EN 14420-2 Hose fittings with clamp units Part 2: Hose side parts of hose tail	Approval
BS EN 14420-3 Hose fittings with clamp units Part 3: Clamp units, bolted or pinned	Approval
BS EN 14420-4 Hose fittings with clamp units Part 4: Flange connections	Approval
BS EN 14420-5 Hose fittings with clamp units Part 5: Threaded connections	Approval
BS EN 14420-6 Hose fittings with clamp units Part 6: TW tank truck couplings	Approval
BS EN 14420-7 Hose fittings with clamp units Part 7: Cam locking couplings	Approval
BS EN 14420-8 Hose fittings with clamp units Part 8: Symmetrical half coupling (Guillemin system)	Approval
BS EN 14422 Clamp type coupling assemblies for LPG transfer hoses	Approval
BS EN 14423 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar	Approval
BS EN 14424 Hose fittings with screwed ferrules	Approval
BS EN 14427 LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction	Public Comment
BS EN 14570 LPG equipment and accessories - Equipping of overground and underground LPG vessels	Public Comment
BS EN 14841 LPG equipment and accessories - Discharge procedures for LPG rail tankers	Approval
BS EN 14893 LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres	Accepted
BS EN 14912 LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders	Accepted
BS EN 15779:2009/A1 Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (?4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography	Approval
BS EN 15888 Transportable gas cylinders - Cylinder bundles - Periodic inspection and testing	Approval
BS EN 16125 LPG equipment and accessories - Pipework systems and supports - LPG inliquid phase and vapour pressure phase	Accepted
BS EN 16509 Transportable gas cylinders - Non-refillable, small transportable, seamless steel cylinders of capacities up to 120ml containing compressed or liquefied gases (compact cylinders) - Design, filling and testing	Public Comment
BS EN 16631 LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Reconditioning requirements	Accepted
BS EN 589 Cor 1 Automotive fuels - LPG - Requirements and test methods	null
BS EN 853 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification	Public Comment
BS EN 854 Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification	Public Comment
BS EN 856 Hose and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification	Public Comment
BS EN 857 Hose and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification	Public Comment
BS EN ISO 10723 Natural gas - Performance evaluation for analytical systems	Publication
BS EN ISO 11120 Gas cylinders - Refillable seamless steel tubes of water capcacity between 150 l and 3 000 l - Design, construction and testing	Approval
BS EN ISO 11439 Gas cylinders - High pressure cylinders for the onboard storage of natural gas as a fuel for automotive vehicles	Approval
BS EN ISO 11623 Transportable gas cylinders - Periodic inspection and testing of composite gas cylinders	Public Comment
BS EN ISO 15858 UV-C Devices - Safety information	Accepted
BS EN ISO 16170 In situ test methods for very high efficiency filter systems in industrial facilities	Public Comment
BS EN ISO 8331 Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance	Public Comment
BS ENISO 10286 Gas cylinders - Terminology	Public Comment
BS ENISO 10462 Gas cylinders - Transportable cylinders for dissolved acetylene - Periodic inspection and maintenance	Public Comment
BS ENISO 11120:1999/A1 Gas cylinders — Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l — Design construction and testing - Amendment 1 - Requirements for design of tubes for embrittling gases	Approval
BS ENISO 11363-1:2010/CORR 2 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders Part 1: Specifications (ISO 11363-1:2010)	Publication
BS ENISO 13088 Gas cylinders - Acetylene cylinder bundles - Filling conditions and filling inspection	Publication
BS ENISO 13341:2010/A1 Gas cylinders - Fitting of valves to gas cylinders	Public Comment
BS ENISO 13686 Natural gas - Quality designation	Publication
BS ENISO 15957 Challenge contaminants for testing air cleaning equipment	Public Comment
BS ENISO 16148 Gas cylinders - Refillable seamless steel gas cylinders - Acoustic emission (AT) examination and follow-up ultrasonic examination (UT) for periodic inspection and testing	Public Comment
BS ENISO 16960 Natural gas - Determination of sulfur compounds - Determination of total sulfur by oxidative microcoulometry method	Public Comment
BS ENISO 17871 Gas cylinders - Quick opening valves - Specification and type testing	Accepted
BS ENISO 21007-2 marking using radio frequency identification technology Part 2: Numbering schemes for radio frequency identification	Idea
BS ENISO 24431 and liquefied gases (excluding acetylene) - Inspection at time of filling	Idea
BS ENISO 3807 Gas cylinders - Acetylene cylinders - Basic requirements and type testing	Approval
BS ENISO 3949 Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification	Idea
BS ENISO 3994 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification	Public Comment
BS ENISO 6806 Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:1992)	Idea
BS ENISO 6808 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification	Public Comment
BS ENISO 6974-5 Natural gas - Determination of composition with defined uncertainty by gas chromatography Part 5: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns	Public Comment
BS ENISO 8029 Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification	Public Comment
BS ENISO 8030 Rubber and plastics hoses - Method of test for flammability	Public Comment
BS ENISO 8330 Rubber and plastics hoses and hose assemblies - Vocabulary	Public Comment
BS ISO 11118 Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods	Approval
BS ISO 11119-4 Gas cylinders of composite construction - Specification and test methods Part 4: Fully wrapped fibre reinforced composite gas cylinders with load-sharing welded metal liners	Accepted
BS ISO 11619 Specification for polyurethane tubing for use primarily in pneumatic installations	Public Comment
BS ISO 12175 Space data and information transfer systems - Standard formatted data units - Structure and construction rules	Accepted
BS ISO 12249-1 Particulate air filters for general ventilation Part 1: Method of calculation for the life cycle cost for air cleaning devices	Accepted
BS ISO 12614-1 Road vehicles - Liquefied natural gas (LNG) fuel system components Part 1: General requirements and definitions	Public Comment
BS ISO 12614-10 Road vehicles - Liquefied natural gas (LNG) fuel system components Part 12: Rigid fuel line in stainless steel	Public Comment
BS ISO 12614-11 Road vehicles - Liquefied natural gas (LNG) fuel system components Part 13: Fittings	Public Comment
BS ISO 12614-12 Road vehicles - Liquefied natural gas (LNG) fuel system components Part 14: Rigid fuel line in material other than stainless steel	Public Comment
BS ISO 12614-13 Road vehicles - Liquefied natural gas (LNG) fuel system components Part 15: Pressure control regulator	Public Comment
BS ISO 12614-14 Road vehicles - Liquefied natural gas (LNG) fuel system components Part 16: Differential pressure fuel content gauge	Public Comment
BS ISO 12614-15 Road vehicles - Liquefied natural gas (LNG) fuel system components Part 17: Capacitance fuel content gauge	Public Comment
BS ISO 12614-16 Road vehicles - Liquefied natural gas (LNG) fuel system components Part 18: Heat exchanger - vaporizer	Public Comment
BS ISO 12614-17 Road vehicles - Liquefied natural gas (LNG) fuel system components Part 19: Natural gas detector	Public Comment
BS ISO 12614-18 Road vehicles - Liquefied natural gas (LNG) fuel system components Part 20: Gas temperature sensor	Public Comment
BS ISO 12614-2 Road vehicles - Liquefied natural gas (LNG) fuel system components Part 2: Performance and general test methods	Public Comment
BS ISO 12614-3 Road vehicles - Liquefied natural gas (LNG) fuel system components Part 3: Check valve	Public Comment
BS ISO 12614-4 Road vehicles - Liquefied natural gas (LNG) fuel system components Part 4: Manual valve	Public Comment
BS ISO 12614-5 Road vehicles - Liquefied natural gas (LNG) fuel system components Part 6: Tank pressure gauge	Public Comment
BS ISO 12614-6 Road vehicles - Liquefied natural gas (LNG) fuel system components Part 7: Overpressure regulator	Public Comment
BS ISO 12614-7 Road vehicles - Liquefied natural gas (LNG) fuel system components Part 8: Pressure relief valve - primary	Public Comment
BS ISO 12614-8 Road vehicles - Liquefied natural gas (LNG) fuel system components Part 10: Excess flow valve	Public Comment
BS ISO 12614-9 Road vehicles - Liquefied natural gas (LNG) fuel system components Part 11: Gas-tight housing and ventilation hose	Public Comment
BS ISO 12617 Liquefied natural gas vehicles - Connector for reflueling vehicles	Public Comment
BS ISO 12619-1 Road vehicles - Compressed gaseous Hydrogen (CGH2) and Hydrogen/methane blends fuel components Part 1: General requirements and definitions	Approval
BS ISO 12619-2 Road vehicles - Compressed gaseous Hydrogen (CGH2) and Hydrogen/methane blends fuel components Part 2: Performance and general test methods	Approval
BS ISO 12619-3 Road vehicles - Compressed gaseous Hydrogen (CGH2) and Hydrogen/methane blends fuel components Part 3: Presure regulator	Approval
BS ISO 12963 Gas analysis - Measurement protocols and data evaluation techniques for general analytical applications	Accepted
BS ISO 13526 Space data and information transfer systems - Tracking data message	Accepted
BS ISO 13734 Natural gas - Organic components used as odorants - Requirements and test methods	Public Comment
BS ISO 14086-1 Flat sheet filter media Part 1: Fractional efficiency test for general ventilation applications	Idea
BS ISO 14469-1 Road vehicles - Compressed natural gas (CNG) refuelling connector Part 1: 20 MPa (200 bar) connector	Idea
BS ISO 14469-2 Road vehicles - Compressed natural gas (CNG) refuelling connector Part 2: 20 MPa (200 bar) connector, size 2	Idea
BS ISO 14469-3 Road vehicles - Compressed natural gas (CNG) refuelling connector Part 3: 25 MPa (250 bar) connector	Idea
BS ISO 14532 Natural gas - Vocabulary	Public Comment
BS ISO 14687-3 Hydrogen fuel - Product specification Part 3: Proton exchange membrane (PEM) fuel cell applications for stationary appliances	Public Comment
BS ISO 15399 Gaseous hydrogen - Cylinders and tubes for stationary storage	Public Comment
BS ISO 15453 Gas cylinders - Seamless steel and aluminium-alloy gas cylinders - Evaluation of existing gas cylinders and consideration of their safe use in other jurisdictions	Accepted
BS ISO 15500-1 Road vehicles - Compressed natural gas (CNG) fuel system components Part 1: General requirements and definitions	Accepted
BS ISO 15500-10 Road vehicles - Compressed natural gas (CNG) fuel system components Part 10: Gas-flow adjuster	Accepted
BS ISO 15500-11 Road vehicles - Compressed natural gas (CNG) fuel system components Part 11: Gas/air mixer	Accepted
BS ISO 15500-12 Road vehicles - Compressed natural gas (CNG) fuel system components Part 12: Pressure relief valve (PRV)	Accepted
BS ISO 15500-15 Road vehicles - Compressed natural gas (CNG) fuel system components Part 15: Gas-tight housing and ventilation hose	Accepted
BS ISO 15500-20 Road vehicles - Compressed natural gas (CNG) fuel system components Part 20: Rigid fuel line in material other than stainless steel	Accepted
BS ISO 15500-7 Road vehicles - Compressed natural gas (CNG) fuel system components Part 7: Gas injector	Accepted
BS ISO 15500-8 Road vehicles - Compressed natural gas (CNG) fuel system components Part 8: Pressure indicator	Accepted
BS ISO 16301 Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for hydraulic jacks and for hydraulic power units used in hydraulic tools — Specification	Public Comment
BS ISO 16332 Road vehicles - Water separation efficiency of fuel filter systems for diesel engine application	Public Comment
BS ISO 16378 Space systems - Measurements of thermo-optical properties of thermo control materials	Public Comment
BS ISO 16380 Road Vehicles - Blended Fuels Refuelling Connector	Public Comment
BS ISO 16709 Realtime solar activity and space environment information for spacecraft operation	Accepted
BS ISO 16890-1 Air filters for general ventilation Part 1: Technical specifications, requirements and efficiency classification system based upon Particulate Matter (PM)	Accepted
BS ISO 16890-2 Air filters for general ventilation Part 2: Measurement of fractional efficiency and air flow resistance	Idea
BS ISO 16890-3 Air filters for general ventilation Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured	Idea
BS ISO 16890-4 Air filters for general ventilation Part 4: Conditioning method to determine the minimum fractional test efficiency	Idea
BS ISO 16891 Test methods for evaluating the durability of the cleanable dust control filter media	Accepted
BS ISO 16923 Compressed natural gas (CNG) vehicle filling stations	Accepted
BS ISO 16924 Liquefied natural gas (LNG) vehicle filling stations	Accepted
BS ISO 16964 Gas cylinders - Flexible hoses for use with industrial and medical gases	Accepted
BS ISO 17255 Space systems - Programme management - Statement of work	Accepted
BS ISO 17324 Rubber hoses for automotive turbochargers - Specification	Accepted
BS ISO 17445 Valve outlets for gas cylinders filled with hydrogen - Specification for valves having a working pressure of between 50 MPa (500 bar) and 80 MPa (800 bar	Idea
BS ISO 17446 Valve outlets for gas cylinders - Specification for valves having a working pressure of between 30 MPa (300 bar) and 50 MPa (500 bar)	Idea
BS ISO 17447-1 Road Vehicles - Glow-plugs with conical seating and their cylinder head housing Part 1: Basic characteristics and dimensions for metal-sheath-type glow-plugs	Accepted
BS ISO 17447-2 Road Vehicles - Glow-plugs with conical seating and their cylinder head housing Part 2: Basic characteristics and dimensions for ceramic-sheath-type glow-plugs	Accepted
BS ISO 17447-3 Road Vehicles - Glow-plugs with conical seating and their cylinder head housing Part 3: Tests and requirements	Accepted
BS ISO 17519 Gas cylinders - Refillable permanently mounted composite tubes for transportation	Accepted
BS ISO 17536-1 Road vehicles - Aerosol separator performance test for internal combustion engines Part 1: General	Accepted
BS ISO 17536-2 Road vehicles - Aerosol separator performance test for internal combustion engines Part 2: Laboratory gravimetric test method	Accepted
BS ISO 18222 Olfactory method for the evaluation of odour intensity	Idea
BS ISO 1823 Rubber hose assemblies for oil suction and discharge service - Specification	Public Comment
BS ISO 18418-1 Gasoline engines - Medium pressure liquid fuel supply connections Part 1: 60° female cone connectors	Accepted
BS ISO 18418-2 Gasoline engines - Medium pressure liquid fuel supply connections Part 2: Pipe assemblies	Accepted
BS ISO 20765-2 Natural gas - Calculation of thermodynamic properties Part 2: Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application	Public Comment
BS ISO 21172-1 Gas cylinders - Welded steel pressure drums up to 3 000 litres capacity for the transport of gases - Design and construction Part 1: Capacities up to 1 000 litres	Public Comment
BS ISO 22435 Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing	Accepted
BS ISO 22646 Space data and information transfer systems - Space packet protocol	Accepted
BS ISO 22666 Space data and information transfer systems - AOS (advanced orbiting systems) space data link protocol	Accepted
BS ISO 22670 Space data and information transfer systems - Space link extension (SLE) - Return-channel-frames service	Approval
BS ISO 2698 Diesel engines -- Clamp-mounted fuel injectors, types 7 and 28	Approval
BS ISO 27126 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification	Public Comment
BS ISO 27127 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification	Public Comment
BS ISO 28741 Road vehicles - Spark-plugs and their cylinder head housings - Basic characteristics and dimensions	Public Comment
BS ISO 2929 Rubber hoses and hose assemblies for bulk fuel delivery by truck - Specification	Public Comment
BS ISO 3807-1 Cylinders for acetylene - Basic requirements Part 1: Cylinders without fusible plugs	Idea
BS ISO 3807-2 Cylinders for acetylene - Basic requirements Part 2: Cylinders with fusible plugs	Idea
BS ISO 5772 Rubber hoses and hose assemblies for measured fuel dispensing - Specification	Accepted
BS ISO 6141 Gas analysis - Requirements for certificates for calibration gases and gas mixtures	Accepted
BS ISO 6142 Gas analysis - Preparation of calibration gas mixtures - Gravimetric method	Accepted
BS ISO 6145-2 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods Part 2: Volumetric pumps	Public Comment
BS ISO 6145-6 Gas analysis - Preparation of calibration gas mixtures using dynamic methods Part 6: Critical orifices	Accepted
BS ISO 6550-3 Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing Part 3: M10 glow-plugs	Public Comment
BS ISO 7504 Gas analysis - Vocabulary	Accepted
BS ISO 9162 Petroleum products - Fuels (class F) - Liquefied petroleum gases - Specifications	Approval
BS ISO 9809-4 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa	Public Comment
BS ISO/TR 16115 Development of provisions for manufacturing defects and manufacturing imperfections for seamless steel and aluminium alloy gas cylinders	Accepted
PD CEN/TR 14473 Transportable gas cylinders - Porous masses for acetylene cylinders	Idea
PD CEN/TR 16514 Investigation on a European standardization roadmap on future unleaded petrol	Approval
PD CEN/TS 00286145 LPG equipment and accessories - Terminology	Accepted
PD CEN/TS WI 00218171 Specification for hose couplings for petrol, oil and lubricants - High pressure couplings	Idea
PD CEN/TS WI 00218172 Specification for couplings for suction and delivery hose (1½ in. to 8 in. nominal sizes) other than fire hose couplings	Idea
PD CEN/TS WI 00218173 Specification for hose couplings for petrol, oil and lubricants (¾ in. to 4 in. nominal sizes)	Idea
PD ISO/TR 16922 Natural gas - Odorization	Approval
PD ISO/TR 20704 Gas cylinders - Test methods on fracture performance for high strength aluminium	Public Comment
PD ISO/TR 22302 Natural gas - Calculation of methane number	Accepted
PD ISO/TS 16111:2008 Transportable gas storage devices - Hydrogen absorbed in reversible meta l hydride	Approval

[ back to top ]

Published standards (88)

Sort by: Reference | Title | Status

Standard reference	Name	Status
BS EN 12806:2003	Automotive liquefied petroleum gas components. Other than containers	Current
BS EN 12805:2002	Automotive LPG components. Containers	Current
BS ISO 20826:2006	Automotive LPG components. Containers	Current
BS EN 13760:2003	Automotive LPG filling system for light and heavy duty vehicles. Nozzle, test requirements and dimensions	Current
BS EN 12979:2002	Automotive LPG systems. Installation requirements	Current
BS EN 13423:2000	Compressed natural gas vehicle operations	Current
BS ISO 8535-1:1996	Compression ignition engines. Steel tubes for high pressure fuel injection pipes - Requirements for seamless cold drawn single wall tubes	Withdrawn
BS ISO 8535-2:2003	Compression ignition engines. Steel tubes for high pressure fuel injection pipes - Requirements for composite tubes	Current
BS ISO 2974:2013	Diesel engines. 60 degree female cones for high-pressure fuel injection components	Current
BS ISO 7612:2006	Diesel engines. Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems. Mounting dimensions	Withdrawn
BS ISO 7612:2009	Diesel engines. Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems. Mounting dimensions	Current
BS ISO 7612:1994	Diesel engines. Base-mounted in-line fuel injection pumps. Mounting dimensions	Withdrawn
BS ISO 4010:1998	Diesel engines. Calibrating nozzle, delay pintle type	Current
BS ISO 12251:2011	Diesel engines. Clamp mounted CR fuel injectors. Mounting dimensions	Current
BS ISO 12345:2002	Diesel engines. Cleanliness assessment of fuel injection equipment	Withdrawn
BS ISO 12345:2013	Diesel engines. Cleanliness assessment of fuel injection equipment	Current
BS ISO 7879:1997	Diesel engines. Cradle mounted in-line fuel injection pumps. Mounting dimensions	Current
BS ISO 7299:1996	Diesel engines. End-mounting flanges for fuel injection pumps	Withdrawn
BS ISO 7299-1:2007	Diesel engines. End-mounting flanges for pumps - Fuel injection pumps	Current
BS ISO 7299-2:2009	Diesel engines. End-mounting flanges for pumps - High-pressure supply pumps for common rail fuel injection systems	Current
BS ISO 14681:1998	Diesel engines. Fuel injection pump testing. Calibrating fuel injectors	Current
BS ISO 13948-2:2012	Diesel engines. Fuel injection pumps and fuel injector low-pressure connections - Non-threaded (push-on) connections	Current
BS ISO 4093:1999	Diesel engines. Fuel injection pumps. High-pressure pipes for testing	Current
BS ISO 6519:2004	Diesel engines. Fuel injection pumps. Tapers for shaft ends and hubs	Current
BS ISO 2697:1999	Diesel engines. Fuel nozzles. Size "S"	Current
BS ISO 13296:1997	Diesel engines. High pressure fuel injection pipe assemblies. General requirements and dimensions	Withdrawn
BS ISO 13296:2005	Diesel engines. High-pressure fuel injection pipe assemblies. General requirements and dimensions	Withdrawn
BS ISO 13296:2012	Diesel engines. High-pressure fuel injection pipe assemblies. General requirements and dimensions	Current
BS ISO 2974:2005	Diesel engines. High-pressure fuel injection pipe end-connections with 60° female cone	Withdrawn
BS AU 261:1995	Diesel engines. High-pressure fuel injection pipe end-connections with 60° female cone	Withdrawn
DD ISO/PAS 22241-2:2005	Diesel engines. NOx reduction agent AUS 32 - Test methods	Withdrawn
DD ISO/PAS 22241-1:2005	Diesel engines. NOx reduction agent AUS 32 - Quality requirements	Withdrawn
BS ISO 22241-1:2006	Diesel engines. NOx reduction agent AUS 32 - Quality requirements	Current
BS ISO 22241-4:2009	Diesel engines. NOx reduction agent AUS 32 - Refilling interface	Current
BS ISO 22241-3:2008	Diesel engines. NOx reduction agent AUS 32 - Handling, transportation and storage	Current
BS ISO 22241-2:2006	Diesel engines. NOx reduction agent AUS 32 - Test methods	Current
BS ISO 22241-5:2012	Diesel engines. NOx reduction agent AUS 32 - Refilling interface for passenger cars	Current
BS ISO 13555-3:2004	Diesel engines. Procedure for checking the dynamic timing of diesel fuel injection equipment - Validation of timing devices	Current
BS ISO 13555-1:2003	Diesel engines. Procedure for checking the dynamic timing of diesel fuel injection equipment - Preconditioning	Current
BS ISO 13555-2:2003	Diesel engines. Procedure for checking the dynamic timing of diesel fuel injection equipment - Test method	Current
BS ISO 9102:1997	Diesel engines. Screw-in injection nozzle holders types 24, 25, 26 and 26.1	Current
BS ISO 7026:1997	Diesel engines. Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size 'S1' type 'B'	Current
BS ISO 8535-1:2006	Diesel engines. Steel tubes for high-pressure fuel injection pipes - Requirements for seamless cold-drawn single-wall tubes	Withdrawn
BS ISO 8535-1:2011	Diesel engines. Steel tubes for high-pressure fuel injection pipes - Requirements for seamless colddrawn single-wall tubes	Current
BS ISO 19438:2003	Diesel fuel and petrol filters for internal combustion engines. Filtration efficiency using particle counting and contaminant retention capacity	Current
BS 4552-3:1992	Fuel filters, strainers and sedimentors for compression-ignition engines - Specification for mounting and connecting dimensions of spin-on fuel filters	Withdrawn
BS 4552-2:1980	Fuel filters, strainers and sedimentors for compression-ignition engines - Method of classification	Withdrawn
BS 4552-1:1979	Fuel filters, strainers and sedimentors for compression-ignition engines. - Methods of test	Current
BS AU 260-4:1995	Fuel injection equipment. Vocabulary - High-pressure pipes and end-connections	Withdrawn
BS ISO 7876-4:2004	Fuel injection equipment. Vocabulary - High-pressure pipes and end-connections	Current
BS ISO 7876-5:2004	Fuel injection equipment. Vocabulary - Common rail fuel injection systems	Current
BS EN ISO 11439:2000	Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles	Current, Work in Hand
BS ISO 19078:2006	Gas cylinders. Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles	Withdrawn
BS ISO 19078:2013	Gas cylinders. Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles	Current
DD ISO/TS 15869:2009	Gaseous hydrogen and hydrogen blends. Land vehicle fuel tanks	Current
DD ISO/TS 20100:2008	Gaseous hydrogen. Fuelling stations	Current, Work in Hand
BS ISO 14687-2:2012	Hydrogen fuel. Product specification - Proton exchange membrane (PEM) fuel cell applications for road vehicles	Current
BS ISO 13985:2006	Liquid hydrogen. Land vehicle fuel tanks	Current
BS 7881:1997	Method of test for petrol filters	Obsolescent
BS EN 13856:2002	Minimum requirements for the content of the user manual for automotive LPG systems	Current
BS ISO 15403:2000	Natural gas. Designation of the quality of natural gas for use as a compressed fuel for vehicles	Withdrawn
BS ISO 11841-1:2000	Road vehicles and internal combustion engines. Filter vocabulary - Definitions of filters and filter components	Current
BS ISO 11841-2:2000	Road vehicles and internal combustion engines. Filter vocabulary - Definitions of characteristics of filters and their components	Current
BS ISO 15500-19:2012	Road vehicles. Compressed natural gas (CNG) fuel system components - Fittings	Current
BS ISO 15500-18:2012	Road vehicles. Compressed natural gas (CNG) fuel system components - Filter	Current
BS ISO 15500-17:2012	Road vehicles. Compressed natural gas (CNG) fuel system components - Flexible fuel line	Current
BS ISO 15500-16:2012	Road vehicles. Compressed natural gas (CNG) fuel system components - Rigid fuel line in stainless steel	Current
BS ISO 15500-14:2012	Road vehicles. Compressed natural gas (CNG) fuel system components - Excess flow valve	Current
BS ISO 15500-9:2012	Road vehicles. Compressed natural gas (CNG) fuel system components - Pressure regulator	Current
BS ISO 15500-6:2012	Road vehicles. Compressed natural gas (CNG) fuel system components - Automatic valve	Current
BS ISO 15500-4:2012	Road vehicles. Compressed natural gas (CNG) fuel system components - Manual valve	Current
BS ISO 15500-3:2012	Road vehicles. Compressed natural gas (CNG) fuel system components - Check valve	Current
BS ISO 15500-2:2012	Road vehicles. Compressed natural gas (CNG) fuel system components - Performance and general test methods	Current
BS ISO 15500-5:2012	Road vehicles. Compressed natural gas (CNG) fuel system components - Manual cylinder valve	Current
BS ISO 15500-13:2012	Road vehicles. Compressed natural gas (CNG) fuel system components - Pressure relief device (PRD)	Current
BS ISO 15501-1:2012	Road vehicles. Compressed natural gas (CNG) fuel systems - Safety requirements	Current
BS ISO 14469-3:2006	Road vehicles. Compressed natural gas (CNG) refuelling connector - 25 MPa (250 bar) connector	Current
BS ISO 4020:2001	Road vehicles. Fuel filters for diesel engines.Test methods	Current
BS ISO 4008-3:1987	Road vehicles. Fuel injection pump testing - Application and test procedures	Current
BS ISO 7654:1998	Road vehicles. Spin-on fuel filters for diesel engines. Mounting and connecting dimensions	Current
BS ISO 12103-1:1997	Road vehicles. Test dust for filter evaluation - Arizona test dust	Current
BS ISO 12103-2:1997	Road vehicles. Test dust for filter evaluation - Aluminium oxide test dust	Current
BS ISO 8789:1994	Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles. Specification	Withdrawn
BS ISO 8789:2009	Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles. Specification	Current
BS AU 153:1970	Specification for fuel injection high pressure pipe fittings	Withdrawn
BS AU 68:1964	Specification for fuel injection low pressure pipe fittings	Withdrawn
BS AU 61:1964	Specification for hydraulic governor for size N fuel injection pump	Withdrawn
BS ISO 13775-2:2000	Thermoplastic tubing and hoses for automotive use - Petroleum-based fuel applications	Current

[ back to top ]

Committees (13)

Sort by: Reference | Name

Committee Reference	Title
MCE/21/2	Air filters for air supply to I.C. engines and compressors - Not on aircraft
MCE/22	Engines for road vehicles
MCE/21	Filters for gases and liquids
MCE/21/6	Filters for volatile liquid fuels
PVE/3	Gas containers
PVE/3/7	Gas containers - Gas cylinder (receptacle) operations
PVE/3/8	Gas containers - Hydrogen technologies
PVE/3/3	Gas containers - Transportable gas containers - Cylinder design, construction and testing at the time of manufacture
GSE/40	Gas supply equipment for natural gas vehicles
PVE/19	LPG containers and their associated fittings
PTI/15	Natural Gas and Gas Analysis
PRI/66	Rubber and plastics tubing, hoses and hose assemblies
ACE/68	Space systems and operations

[ back to top ]