Skip to content
RSS feed for this category

Indicating & control devices

Standards in development (265)

Sort by: Title | Status

Standard TitleStatus
BS AU 145E Specification for retroreflecting number platesApproval
BS EN 12896-1 Public Transport - Reference Data Model Part 1: Common ConceptsPublic Comment
BS EN 12896-2 Public Transport - Reference Data Model Part 2: Public Transport NetworkPublic Comment
BS EN 12896-3 Public Transport - Reference Data Model Part 3: Timing Information and Vehicle SchedulingPublic Comment
BS EN 14420-8:2013/A1 Hose fittings with clamp units Part 8: Symmetrical half coupling (Guillemin system)/Amendment 1Accepted
BS EN 15531-1 Public transport - Service interface for real-time information relating to publictransport operations Part 1: Context and frameworkPublic Comment
BS EN 15531-2 Public transport - Service interface for real-time information relating to public transport operations Part 2: Communications infrastructurePublic Comment
BS EN 15531-3 Public transport - Service interface for real-time information relating to public transport operations Part 3: Functional service interfacesPublic Comment
BS EN 15694:2009/A1 Agricultural and forestry tractors - Passenger seat - Requirements and test proceduresApproval
BS EN 16230-2 Leisure karts Part 2: Safety requirements for tracksPublic Comment
BS EN 16454 Intelligent transport systems - eSafety - eCall end to end conformance testingPublication
BS EN 16643 assemblies - Unbonded fluoroplastic lined (e. g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - SpecificationPublic Comment
BS EN 16831 Agricultural and forestry tractors and agricultural machinery - Safety - Format for reporting accidents with tractors and agricultural machineryPublic Comment
BS EN 16882 Road vehicles - Security of the mechanical seals used on tachograph systems - Requirements and test proceduresPublic Comment
BS EN 1762 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - SpecificationIdea
BS EN 1765 Rubber hose assemblies for oil suction and discharge services - Specification for the assembliesIdea
BS EN 50436-3 Alcholic interlocks - Test methods and performance requirements - Part 3: Guidance for authorities, decision makers, purchasers and users.Public Comment
BS EN 50436-5 Alcohol interlocks - Test methods and performance requirements Part 5: Instruments without a mouthpiece and measuring breath alcohol for general preventive useIdea
BS EN 60081:1998+A6 Ed.5.0 Double-capped fluorescent lamps - Performance specificationsApproval
BS EN 60357:2003+A4 ED.3 Tungsten halogen lamps (non-vehicle) - Performance specificationsnull
BS EN 60809 Ed 2.0 /A6 Amendment 6 - Lamps for road vehicles - Dimensional; electrical and luminous requirementsAccepted
BS EN 60810 ED 4.0 Ed 3.0 /A3 Amendment 3 - Lamps for road vehicles - Performance requirementsPublic Comment
BS EN 60901: 1996+A6 Single-capped fluorescent lamps - Performance specificationsPublication
BS EN 60968:2014+A1 Self-ballasted fluorescent lamps for general lighting services - safety requirementsnull
BS EN 60969 ED 2.0 Self-ballasted lamps for general lighting services - Performance require mentsPublic Comment
BS EN 60969:2013/prAA:2014 Self-ballasted compact fluorescent lamps for general lighting services - Performance requirementsnull
BS EN 61167 Am1 Metal halide lamps - Performance specificationAccepted
BS EN 61167+A1 Metal halide lamps - Performance specificationPublication
BS EN 62031 Ed 2.0 LED modules for general lighting - Safety specificationsAccepted
BS EN 62035: A1 Discharge lamps (excluding fluorescent lamps) - Safety specificationsAccepted
BS EN 62532+A1 Fluorescent induction lamps - Safety specificationsPublic Comment
BS EN 62612 +A1 Self-ballasted LED lamps for general lighting services with supply voltages IECXXXYYY2 50V - Performance requirements Amendment 1Publication
BS EN 62663-1 Non-self-ballasted LED lamps Part 1: Safety requirementsPublic Comment
BS EN 62663-2 Non-ballasted single capped LED lamps for general lighting - Part 2: Performance requirementsPublic Comment
BS EN 62717 Ed 1.0 /A1 Amendment 1 - LED modules for general lighting - Performance requirementsApproval
BS EN 62717 LED modules for general lighting - Performance requirementsPublication
BS EN 62717/prAA:2014 LED modules for general lighting - Performance requirementsnull
BS EN 62838 Self-ballasted LED-lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. - Safety specificationApproval
BS EN 62868 Organic light emitting diode (OLED) panels for general lighting - Safety requirementsPublication
BS EN 62922 Organic light emitting diode (OLED) panels for general lighting - Performance requirementsPublic Comment
BS EN 62931 GX16t-5 capped tubular LED lamp - Safety specificationsAccepted
BS EN 63013 LED packages packages - Long-term luminous flux maintenance projectionAccepted
BS EN ISO 17962 Agricultural machinery - Equipment for sowing - Minimization of the environmental effects of fan exhaust from pneumatic systemsPublication
BS EN WI 16820 assemblies for use in the pharmaceutical and biotechnological industry with hoses of non-metallic materials - Elastomeric hoses with or without liningPublic Comment
BS EN WI 16821 assemblies for use in the pharmaceutical and biotechnological industry with hoses of non-metallic materials - Silicone rubber hosePublic Comment
BS ENISO 12813 check communication for autonomous systemsApproval
BS ENISO 12855 Electronic fee collection - Information exchange between service provision and toll chargingApproval
Opens a new windowBS ENISO 1401 Rubber hoses for agricultural sprayingPublic Comment
BS ENISO 14823 data dictionaryAccepted
BS ENISO 14906:2011/Amd 1 Application interface definition for dedicated short-range communication - Amendment 1Publication
BS ENISO 15008 Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and test procedures for in-vehicle visual presentationAccepted
BS ENISO 16230-1 Agricultural machinery and tractors — Safety of higher voltage electrical and electronic components and systems Part 1: General requirementsApproval
BS ENISO 16231-2 Self-propelled agricultural machinery - Assessment of stability Part 2: Calculations and test proceduresApproval
BS ENISO 17575-1 interface definition for autonomous systems Part 1: ChargingApproval
BS ENISO 17575-2 interface definition for autonomous systems Part 2: Communication and connection to the lower layersApproval
BS ENISO 17575-3 interface definition for autonomous systems Part 3: Context dataApproval
BS ENISO 17575-4 interface definition for autonomous systems Part 4: RoamingTechnical Review
BS ENISO 18497 Safety of highly automated agricultural machinesPublic Comment
BS ENISO 19061 EN ISO 19061: Intelligent transport systems ? Automatic Vehicle andEquipment Registration (AVI/AEI) ? Interoperable application profile forAVI/AEI and Electronic Register Identification using dedicated short rangecommunicationIdea
Opens a new windowBS ENISO 2398 compressed air - SpecificationPublic Comment
BS ENISO 24014-1 Intelligent transport systems - Interoperable fare management system Part 1: ArchitecturePublication
BS ENISO 24534-3 Intelligent transport systems - Automatic vehicle and equipment identification - Electronic registration identification (ERI) for vehicles Part 3: Vehicle dataApproval
BS ENISO 3949 Textile-reinforced types for hydraulic applications - SpecificationAccepted
BS ENISO 4254-1 Agricultural machinery - Safety Part 1: General requirements (ISO 4254-1:2013)Approval
BS ENISO 5774 for compressed-air applications - SpecificationApproval
BS ENISO 6134 saturated steam - SpecificationPublic Comment
BS ENISO 6802 assemblies with wire reinforcements - Hydraulic impulse test with flexingPublic Comment
BS ENISO 6803 assemblies - Hydraulic-pressure impulse test without flexingPublic Comment
Opens a new windowBS ENISO 6806 in oil burners - SpecificationPublic Comment
BS ENISO 7233 assemblies - Determination of resistance to vacuumPublic Comment
BS ENISO 7326 ozone resistance under static conditionsPublic Comment
Opens a new windowBS ENISO 7751 assemblies - Ratios of proof and burst pressure to maximum working pressurePublic Comment
Opens a new windowBS ENISO 8028 assemblies for airless paint spraying - SpecificationPublic Comment
Opens a new windowBS ENISO 8033 of adhesion between componentsPublic Comment
BS ENISO 8308 Determination of transmission of liquids through hose and tubing wallsApproval
BS ENISO 8331 assemblies - Guidelines for selection, storage, use and maintenancePublic Comment
BS ISO 10924-5 Road vehicles - Circuit breakers - Part 5: Circuit breakers with rated voltage of 450 V.Public Comment
BS ISO 11001-1 Agricultural wheeled tractors and implements - Three-point hitch couplers Part 1: U-frame couplerPublic Comment
BS ISO 11424 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - SpecificationPublic Comment
BS ISO 11759 Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) - SpecificationPublic Comment
BS ISO 11783-1 Tractors and machinery for agriculture and forestry - Serial control and communications data network Part 1: General standard for mobile data communicationPublic Comment
BS ISO 11783-10 Tractors and machinery for agriculture and forestry - Serial control and communications data network Part 10: Task controller and management information system data interchangePublication
BS ISO 11898-1 Road vehicles - Controller area network (CAN) Part 1: Data link layer and physical signallingPublic Comment
BS ISO 11898-2 Road vehicles - Controller area network (CAN) - Part 2:High-speed medium access unitAccepted
BS ISO 11992-1 Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles Part 1: Physical and data-link layersIdea
BS ISO 11992-3 Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles Part 3: Application layer for equipment other than brakes and running gearIdea
BS ISO 13111-1 Intelligent transport systems - The use of personal ITS station to support ITS service provision for travellers Part 1: General information and use cases definitionAccepted
BS ISO 13140-1 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 Part 1: Test suite structure and test purposesAccepted
BS ISO 13143-1 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 Part 1: Test suite structure and test purposesAccepted
BS ISO 13143-2 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 Part 2: Abstract test suiteAccepted
BS ISO 13184-2 Intelligent transport systems - Guidance protocol via personal ITS station for advisory safety systems Part 2: Road guidance protocol (RGP) requirements and specificationPublic Comment
BS ISO 13363 Rubber and plastics hoses for marine-engine wet-exhaust systems - SpecificationApproval
BS ISO 13400-3 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 3: Wired vehicle interface based on IEEE 802.3Accepted
Opens a new windowBS ISO 13400-4 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) Part 4: Ethernet Diagnostic ConnectorPublic Comment
BS ISO 13775-1 Thermoplastic tubing and hoses for automotive use Part 1: Non-fuel applicationsApproval
BS ISO 13775-2 Thermoplastic tubing and hoses for automotive use Part 2: Petroleum-based-fuel applicationsPublic Comment
BS ISO 14269-2:1997/Amd 1 Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment Part 2: Heating, ventilation and air-conditioning test method and performance - Amendment 1Accepted
BS ISO 14296 Intelligent Transport Systems - Extension of map database specifications for applications of cooperative ITSApproval
BS ISO 1436 Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - SpecificationApproval
BS ISO 14813-1 Reference model architecture(s) for the ITS sector Part 1: ITS service domains, service groups and servicesApproval
BS ISO 14816:2005/Amd 1 Road transport and traffic telematics - Automatic vehicle and equipment identification - Numbering and data structure - Amendment 1Accepted
BS ISO 14817-1 Intelligent transport systems - ITS central data registry Part 1: Requirements for an ITS central data registryApproval
BS ISO 14817-2 Intelligent transport systems - ITS central data registry Part 2: Governance of the Central ITS Data Concept RegistryApproval
Opens a new windowBS ISO 14817-3 Intelligent transport systems - ITS central data registry and data dictionaries Part 3: Object identifier assignments for ITS data conceptsPublic Comment
BS ISO 14827-3 Intelligent transport Systems - Data interfaces between centres for Intelligent transport systems Part 3: Data interfaces between centres for Intelligent Transport Systems (ITS) using XMLAccepted
BS ISO 14982 Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteriaAccepted
BS ISO 15005 Road vehicles - Ergonomic aspects of transport information and control systems - Dialogue management principles and compliance proceduresAccepted
Opens a new windowBS ISO 15031-3 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics Part 3: Diagnostic connector and related electrical circuits:specification and usePublic Comment
BS ISO 15031-5 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics Part 5: Emissions-related diagnostic servicesPublication
BS ISO 15031-6 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics Part 6: Diagnostic trouble code definitionsPublication
BS ISO 15082 Road vehicles - Tests for rigid plastic safety glazing materialsPublic Comment
BS ISO 15118-7 Road vehicles - Vehicle to grid communication interface Part 7: Network and application protocol requirements for wireless communicationAccepted
BS ISO 15118-8 Road vehicles - Vehicle to grid communication interface Part 8: Physical layer and data link layer requirements for wireless communicationAccepted
BS ISO 15638-1 Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 1: Framework and architecturePublication
BS ISO 15638-10 Intelligent transport systems - Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 10: Emergency messaging system/eCall (EMS)Accepted
BS ISO 15638-13 Intelligent transport systems - Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 13: Mass Penalties and Levies (VMC)Accepted
BS ISO 15638-18 Intelligent transport systems - Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 18: ADR (Dangerous Goods) transport monitoring (ADR)Accepted
BS ISO 15638-19 Intelligent transport systems - Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 19: Vehicle parking facilities (VPF)Accepted
BS ISO 15638-9 Intelligent transport systems - Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 9: Remote electronic tachograph monitoring (RTM)Accepted
BS ISO 15765-2 Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) - Part 2: Transport protocol and network layer services.Public Comment
BS ISO 15765-4 Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) Part 4: Requirements for emissions-related systemsPublic Comment
BS ISO 15784-2 Data Exchange Involving Roadside Modules Communication Part 2: Application Profile - SNMPApproval
BS ISO 16301 Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for hydraulic jacks applications - SpecificationAccepted
BS ISO 16411 Tractors and machinery for agriculture and forestry - Slow moving vehicle identification emblem (SMV emblem)Accepted
BS ISO 16460 Intelligent transport systems - Communications access for land mobiles (CALM) - Single-hop communications protocol messages for global usageIdea
BS ISO 16461 Intelligent transport systems - Criteria for privacy and integrity protection in probe vehicle information systemsIdea
BS ISO 16787 Intelligent Transport Systems - Assisted Parking System (APS) - Parking with reference to other parked vehicles - Performance and Test ProceduresAccepted
BS ISO 16845-1 Road vehicles - Controller area network (CAN) conformance test plan - Part 1:Data link layer and physical signalingAccepted
BS ISO 17262:2012/Amd 1 Intelligent transport systems - Automatic vehicle and equipment identification - Numbering and data structures - Amendment 1Accepted
BS ISO 17264:2009/Amd 1 Intelligent transport systems - Automatic vehicle and equipment identification - Interfaces - Amendment 1Accepted
BS ISO 17438-1 Intelligent transport systems (ITS) - Indoor navigation for personal and vehicle ITS stations Part 1: General information and use case definitionApproval
BS ISO 17438-4 Intelligent transport systems (ITS) - Indoor navigation for personal and vehicle ITS stations Part 4: Requirements and specification for interface between Personal/Vehicle and Central ITS stationsIdea
BS ISO 17449 Road vehicles - Safety glazing materials - Test methods for properties of electrically heated glazingApproval
BS ISO 17488 Road vehicle - Transport information and control systems - Detection-Response Task (DRT) for assessing attentional effects of cognitive load in drivingPublic Comment
BS ISO 17515-1 Intelligent transport systems - Communications access for land mobiles (CALM) - Evolved Universal Terrestrial Radio Access Network (E-UTRAN) Part 1: General usageApproval
BS ISO 17931 Intelligent transport systems - Extension of map database specifications for Local Dynamic Map for applications of Cooperative ITSAccepted
BS ISO 17987-1 Road vehicles - Local interconnect network (LIN) - Part 1: General information and use case definitionPublic Comment
BS ISO 17987-2 Road vehicles - Local interconnect network (LIN) - Part 2: Transport protocol and network layer servicesPublic Comment
BS ISO 17987-3 Road vehicles - Local interconnect network (LIN) - Part 3: Protocol specificationPublic Comment
BS ISO 17987-4 Road vehicles - Local interconnect network (LIN) - Part 4: Electrical Physical Layer (EPL) specification 12V/24VPublic Comment
BS ISO 17987-6 Road vehicles - Local interconnect network (LIN) - Part 6: Protocol conformance test specificationPublic Comment
BS ISO 17987-7 Road vehicles - Local interconnect network (LIN) - Part 7: Electrical Physical Layer (EPL) conformance test specificationPublic Comment
BS ISO 18317 Intelligent transport systems - Pre-emption of ITS communication networks for disaster relief and emergency communicationsIdea
BS ISO 18495-1 Intelligent transport systems - Commercial freight - Automotive visibilty in the distribution supply chain - Part 1: Architecture and data definitionsPublic Comment
BS ISO 18682 Intelligent transport systems - External hazard detection and notification systems - Basic requirementsPublic Comment
BS ISO 19013-2 Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification Part 2: Gasoline fuelsApproval
BS ISO 19079 Intelligent Transport Systems - Communications access for land mobiles (CALM) - 6LoWPAN networkingAccepted
BS ISO 19080 Intelligent Transport Systems - Communications access for land mobiles (CALM) - CoAP facilityAccepted
BS ISO 19082 Intelligent transport systems - Architecture for signal control systems utilizing information collected by vehicle-to-infrastructure communicationIdea
Opens a new windowBS ISO 19083-1 Intelligent transport systems - Public transport - Emergency evacuation and disaster response and recovery Part 1: FrameworkPublic Comment
BS ISO 19083-2 Intelligent transport systems - Public transport - Emergency evacuation and disaster response and recovery Part 2: Data flowIdea
BS ISO 19237 Intelligent Transport Systems - Pedestrian Collision Mitigation Systems - Operation, Performance, and Verification RequirementsAccepted
BS ISO 19385 Rubber hoses and hose assemblies for Water Jetting or Water blasting applicationsAccepted
BS ISO 19414 Intelligent transport systems - Service architecture of probe vehicle systemsIdea
BS ISO 19453-1-1 and testing for electrical and electronic equipment for drive system of electric propulsion vehicles Part 1: GeneralIdea
BS ISO 19453-2 Road vehicles - Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles Part 2: Mechanical loadsIdea
BS ISO 19453-3 Road vehicles - Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles Part 3: Climatic loadsIdea
BS ISO 19453-4 Road vehicles - Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles Part 4: Chemical loadsIdea
BS ISO 19718 Rubber and plastics hoses and hose assemblies, wire- or textile- reinforced, for hydraulic power units used in hydraulic tool applications - SpecificationAccepted
BS ISO 20076 Road Vehicles - Test methods and performance requirements for high voltage connectorIdea
BS ISO 20077-1 Road Vehicles - Extended Vehicle Part 1: General informationIdea
BS ISO 20077-2 Road Vehicles - Extended Vehicle Part 2: Methodology for designing the extended vehicleIdea
BS ISO 20080 Road vehicles - Information for remote diagnostic support - General requirements, definitions and use casesIdea
BS ISO 20383 Tractors and machinery for agriculture and forestry - Speed Identification Symbol (SIS)Accepted
BS ISO 20730 Road vehicles - Vehicle roadworthiness interface for electronic Periodical Technical Inspection (ePTI) - Communication requirementsIdea
BS ISO 21210:2012/Amd 1 Intelligent transport systems - Communications access for land mobiles (CALM) - IPv6 Networking - Amendment 1Public Comment
BS ISO 21308-6 Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP) Part 6: Coding of hook loader bodyworkIdea
BS ISO 21308-7 Road vehicles - Product data exchange between chassis and body work manufacturers (BEP) Part 7: Coding of skip loader bodyworkIdea
BS ISO 22179 Intelligent transport systems - Full speed range adaptive cruise control (FSRA) systems - Performance requirements and test proceduresAccepted
BS ISO 22900-2 Road vehicles - Modular vehicle communication interface (MVCI) Part 2: Diagnostic protocol data unit application programming interface (D-PDU API)Public Comment
BS ISO 22901-3 Road vehicles - Open diagnostic data exchange (ODX) - Part 3: Fault symptom exchange description (FXD)Public Comment
BS ISO 23013 Road vehicles — Determination to forced entry of safety glassconstructions used in vehicle glazing — Test of glazing systemsApproval
BS ISO 24097-1 Intelligent transport systems - Using web services (machine-machine delivery) for ITS service delivery Part 1: Realization of interoperable web servicesPublic Comment
BS ISO 24102-1:2013/Amd 1 Intelligent transport systems - Communications access for land mobiles (CALM) - ITS station management Part 1: Local management - Amendment 1Public Comment
BS ISO 24102-2 Intelligent transport systems - Communications access for land mobiles (CALM) - ITS station management Part 2: Remote managementPublic Comment
BS ISO 24102-3:2013/Amd 1 Intelligent transport systems - Communications access for land mobiles (CALM) - ITS station management Part 3: Service access points - Amendment 1Public Comment
BS ISO 24102-4:2013/Amd 1 Intelligent transport systems - Communications access for land mobiles (CALM) - ITS station management Part 4: Station-internal management communications - Amendment 1Public Comment
BS ISO 24102-5:2013/Amd 1 Intelligent transport systems - Communications access for land mobiles (CALM) - ITS station management Part 5: Fast service advertisement protocol (FSAP) - Amendment 1Public Comment
BS ISO 24534-4:2010/Amd 1 Automatic vehicle and equipment identification - Electronic registration identification (ERI) for vehicles Part 4: Secure communications using asymmetrical techniques - Amendment 1Accepted
BS ISO 24534-5:2011/Amd 1 Intelligent transport systems - Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles Part 5: Secure communications using symmetrical techniques - Amendment 1Accepted
BS ISO 25119-1 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems Part 1: General principles for design and developmentAccepted
BS ISO 25119-2 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems Part 2: Concept phaseAccepted
BS ISO 25119-3 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems Part 3: Series development, hardware and softwareAccepted
BS ISO 25119-4 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems Part 4: Production, operation, modification and supporting processesAccepted
BS ISO 2575:2010/Amd 5 Road vehicles - Symbols for controls, indicators and tell-tales - Amendment 5Approval
BS ISO 27145-4 Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements Part 4: Connection between vehicle and test equipmentPublic Comment
BS ISO 29281-1:2013/Amd 1 Intelligent transport systems - Communication access for land mobiles (CALM) - Non-IP networking Part 1: Fast networking & transport layer protocol (FNTP) - Amendment 1Public Comment
BS ISO 3536 Road vehicles - Safety glazing materials - VocabularyPublic Comment
BS ISO 3767-1 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays Part 1: Common symbolsPublic Comment
BS ISO 3767-2 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays Part 2: Symbols for agricultural tractors and machineryPublic Comment
BS ISO 3862 Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids - SpecificationApproval
BS ISO 3917 Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weatheringPublic Comment
BS ISO 4079 Rubber hoses and hose assemblies - Textile-reinforced hydraulic types for oil-based or water-based fluids - SpecificationApproval
BS ISO 4642-1 Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 1: Semi-rigid hoses for fixed systemsApproval
BS ISO 4642-2 Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehiclesApproval
BS ISO 5131 Tractors for agriculture and forestry - Measurement of noise ate the operator's position - Survey methodApproval
BS ISO 5772 Rubber hoses and hose assemblies for measured fuel dispensing - SpecificationApproval
Opens a new windowBS ISO 6804 Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers - SpecificationPublic Comment
BS ISO 7216 Acoustics - Agricultural and forestry wheeled tractors and self-propelled machines - Measurement of noise emitted when in motionApproval
BS ISO 7637-3 Road vehicles - Electrical disturbance by conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply linesPublic Comment
BS ISO 789-1 Agricultural tractors - Test procedures Part 1: Power tests for power take-offAccepted
BS ISO 789-13 Agricultural tractors - Test procedures Part 13: Terms and definitionsAccepted
BS ISO 789-2 Agricultural tractors - Test procedures Part 2: Rear three-point linkage lifting capacityAccepted
BS ISO 789-3 Agricultural tractors - Test procedures Part 3: Turning and clearance diametersPublication
BS ISO 789-9 Agricultural tractors - Test procedures Part 9: Power tests for drawbarAccepted
BS ISO 8789 Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles - SpecificationPublic Comment
BS ISO 8820-3 Road vehicles - Fuse links - Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)Approval
BS ISO 8820-4 Road vehicles - Fuse-links - Part 4:Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures.Accepted
BS ISO/IEC 15118-4 Road vehicles - Vehicle to grid communication interface - Part 4: Network and application protocol conformance test.Accepted
BS ISO/IEC 15118-5 Road vehicles - Vehicle to grid communication interface - Part 5: Physical and data link layer conformance tests.Accepted
BS ISO/IEC 15118-6 interface Part 6: General information and use-case definition for wireless communicationPublic Comment
BS ISO/TR 16786 Intelligent transport systems - The use of simulation models for evaluation of traffic management systems: input parameters and reporting template for simulation of traffic signal control systemsApproval
PD CEN/TS 13149-7 Public Transport - Road Vehicle Scheduling and Control Systems Part 7: IP-based Networking Inside A Vehicle, Network and System ArchitectureApproval
PD CEN/TS 15531-5 Public transport ? Service interface for real?time information relating to public transport operations ? Part 5: Functional service interfaces ? Situation exchangeAccepted
PD CEN/TS 16157-6 Intelligent transport systems - DATEX II data exchange specifications for traffic management and information Part 6: Parking PublicationsApproval
PD CEN/TS 16405 CEN/TS 16405 Intelligent transport systems - eCall - Additional data concept specification for heavy goods vehiclesPublication
PD CEN/TS 16614-3 Timetable Exchange (NeTEx) Part 3 Public transport network fare information exchange formatApproval
PD CEN/TS 17425 Cooperative systems - Data exchange specification for in-vehicle presentation of external road and traffic related dataApproval
PD CEN/TS 17426 Co-operative systems - Contextual speedsApproval
PD CEN/TS 21219-18 Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) Part 18 : Traffic Flow and Prediction ( TPEG2-TFP)Publication
PD CEN/TS 21219-3 Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) Part 3 : TPEG2-UML to binary conversion rulesPublication
PD CEN/TS 21219-5 Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) Part 5 : service framework (TPEG2-SFW) to binary conversion rulesPublication
PD CEN/TS 21219-6 Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) Part 6 : Message Manamenetn Container ( TPEG2-MMC)Publication
PD CENISO/TS 14907-1 procedures for user and fixed equipment Part 1: Description of test proceduresApproval
PD EN ISO/TS 19299 Electronic fee collection - Security frameworkApproval
PD EN PAS CCFL Cold cathode fluorescent lamps (CCFL) Performancenull
PD EN PAS CCFL Cold cathode fluorescent lamps (CCFL) Safetynull
PD EN PAS EEFL External Electrode Fluorescent Lamp (EEFL) Performancenull
PD EN PAS EEFL External Electrode Fluorescent Lamp (EEFL) Safetynull
PD IEC/PAS 62816-1 Ed 1.0 External Electrode Fluorescent Lamps Part 1: Safety SpecificationsApproval
PD IEC/TS 62612 Self-ballasted LED-lamps for general lighting services >50 V - Performan ce requirementsIdea
PD IEC/TS 62861 Guide to principal component reliability testing for LED light sources and LED luminairesAccepted
PD IEC/TS 62972 light emitting diode (OLED) products andrelated equipment - Terms and definitionsAccepted
PD ISO/PAS 19451-1 Application of ISO 26262:2011-2012 to SemiconductorsIdea
PD ISO/TR 17185-2 transport user information Part 2: Data and interface standards catalogue and cross referencePublication
PD ISO/TR 17427-10 Intelligent transport systems - Cooperative ITS Part 10: Driver distraction and information displayApproval
PD ISO/TR 17427-11 Intelligent transport systems - Cooperative ITS Part 11: Compliance and enforcement aspectsAccepted
PD ISO/TR 17427-12 Intelligent transport systems - Cooperative ITS Part 12: Release processesAccepted
PD ISO/TR 17427-13 Intelligent transport systems - Cooperative ITS Part 13: Use case test casesAccepted
PD ISO/TR 17427-14 Intelligent transport systems - Cooperative ITS Part 14: Maintenance requirements and processesAccepted
PD ISO/TR 17427-2 Intelligent transport systems - Cooperative ITS Part 2: Framework OverviewApproval
PD ISO/TR 17427-3 Intelligent transport systems - Cooperative ITS Part 3: Concept of operations (ConOps) for 'core' systemsApproval
PD ISO/TR 17427-4 Intelligent transport systems - Cooperative ITS Part 4: Minimum system requirements and behaviour for core systemsApproval
PD ISO/TR 17427-5 Intelligent transport systems - Cooperative ITS Part 5: Effective approaches to securityAccepted
PD ISO/TR 17427-6 Intelligent transport systems - Cooperative ITS Part 6: 'Core system' risk assessment methodologyApproval
PD ISO/TR 17427-7 Intelligent transport systems - Cooperative ITS Part 7: Privacy aspectsApproval
PD ISO/TR 17427-8 Intelligent transport systems - Cooperative ITS Part 8: Liability aspectsApproval
PD ISO/TR 17427-9 Intelligent transport systems - Cooperative ITS Part 9: Compliance and enforcement aspectsApproval
PD ISO/TR 17465-2 Intelligent transport systems - Cooperative ITS Part 2: Guidelines for standards documentsApproval
PD ISO/TR 17465-3 Intelligent transport systems - Cooperative ITS Part 3: Release procedures for standards documentsApproval
PD ISO/TR 17987-5 Road vehicles - Local Interconnect Network (LIN) Part 5: Application programmers interface (API)Accepted
PD ISO/TR 18561-1 Intelligent transport systems - The use of personal ITS station for green transport information and management Part 1: General information and use cases definitionAccepted
PD ISO/TR 19639 Electronic fee collection - Investigation of EFC standards for common payment schemes for multi-modal transport servicesPublication
PD ISO/TR 20545 Intelligent transport systems - Vehicle/roadway warning and control systems - Report on standardisation for vehicle automated driving systems (RoVAS)/Beyond driver assistance systemsAccepted
PD ISO/TR 24097-2 Intelligent transport systems - Using web services (machine-machine delivery) for ITS service delivery Part 2: Elaboration of interoperable web services' interfacesApproval
PD ISO/TS 19091 Intelligent transport systems - Cooperative ITS - Using V2I and I2V communications for applications related to signalized intersectionsIdea
PD ISO/TS 20026 Intelligent transport systems - Cooperative ITS - Test architectureIdea
PD ISO/TS 20594 Intelligent Transport Systems - Cooperative Systems - Test specifications for TS 17429Idea
PD ISO/TS 21219-1 Intelligent transport systems - Traffic and Travel Information via Transport Protocol Experts Group, generation 2 (TPEG2) Part 1: Introduction, numbering and versions (TPEG2-INV)Accepted
PD ISO/TS 21219-10 Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) Part 10: Conditional access information (TPEG2-CAI)Accepted
PD ISO/TS 21219-14 Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) Part 14: Parking information application (TPEG2-PKI)Idea
PD ISO/TS 21219-15 Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) Part 15: Traffic event compact (TPEG2-TEC)Idea
PD ISO/TS 21219-16 Intelligent transport systems - Traffic and travel information (TTI) via transport protocol expert group, generation 2 (TPEG2) Part 16: Fuel price information application (TPEG2-FPI)Idea
PD ISO/TS 21219-19 Intelligent transport systems - Traffic and travel information (TTI) via Transport protocol expert group, generation 2 (TPEG2) Part 19: Weather information application (TPEG2-WEA)Accepted
PD ISO/TS 21219-9 Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) Part 9: Service and network information (TPEG2-SNI)Accepted

[ back to top ]

Published standards (26)

Sort by: Reference | Title | Status

Standard referenceNameStatus
BS 1495:1948Agricultural tractor detailsWithdrawn
BS 1495:1964Agricultural tractor details for light and medium tractorsWithdrawn
BS 1495:1958Agricultural tractor details for light and medium tractorsWithdrawn
BS EN 50148:1996Electronic taximetersCurrent
BS AU 217-1a:1987Maximum road speed limiters for motor vehicles - Specification for installed requirementsCurrent
BS AU 217-2:1989Maximum road speed limiters for motor vehicles - Specification for system and component requirementsCurrent
BS ISO 12214:2002Road vehicles. Direction-of-motion stereotypes for automotive hand controlsWithdrawn
BS ISO 12214:2010Road vehicles. Direction-of-motion stereotypes for automotive hand controlsCurrent
BS EN ISO 15005:2002Road vehicles. Ergonomic aspects of transport information and control systems. Dialogue management principles and compliance proceduresCurrent
BS ISO 13207-1:2012Road vehicles. LED lamp characteristics for bulb compatible failure detection - LED lamps used as direction indicators Current
BS ISO 4040:2009Road vehicles. Location of hand controls, indicators and tell-tales in motor vehiclesCurrent
BS EN ISO 15007-1:2002Road vehicles. Measurement of driver visual behaviour with respect to transport information and control systems - Definitions and parametersWithdrawn
BS EN ISO 15007-1:2014Road vehicles. Measurement of driver visual behaviour with respect to transport information and control systems - Definitions and parametersCurrent
BS ISO 2575:2010+A3:2014Road vehicles. Symbols for controls, indicators and tell-talesCurrent, Work in Hand
BS ISO 2575:2004+A4:2009Road vehicles. Symbols for controls, indicators and tell-talesWithdrawn
BS ISO 2575:2000Road vehicles. Symbols for controls, indicators and tell-talesWithdrawn
BS AU 236:1990Specification for circular electronic tachographs for road vehiclesCurrent
BS AU 199a:1997Specification for location of hand controls, indicators and tell-tales in passenger carsWithdrawn
BS AU 152:1970Specification for rear marking plates for vehiclesCurrent
BS AU 145b:1989Specification for retroreflecting number platesWithdrawn
BS AU 145c:1995Specification for retroreflecting number platesWithdrawn
BS 6784:1986Specification for rubber hoses and hose assemblies for automobile power steering systemsWithdrawn
BS 3190:1972Specification for speedometer and odometer systems for road vehiclesWithdrawn
BS AU 143f:1996Specification for symbols for controls, indicators and tell-tales for road vehiclesWithdrawn
BS AU 143c:Extract:1984Specification for symbols for controls, indicators and tell-tales for road vehicles. Print of symbols for reproduction purposesWithdrawn
BS ISO 16154:2005Tractors and machinery for agriculture and forestry. Installation of lighting, light signalling and marking devices for travel on public roadwaysCurrent

[ back to top ]

Need Help?

We are here to help you with any queries. Email us for help.

But first, why not view the Help Pages?