Skip to content
RSS feed for this category

Systems

Standards in development (272)

Sort by: Title | Status

Standard TitleStatus
BS 8589 Restraining devices for children in motor vehicles - specifications for side impact performanceIdea
BS AU 145E Specification for retroreflecting number platesPublic Comment
BS EN 12896-1 Public Transport - Reference Data Model Part 1: Common ConceptsPublic Comment
Opens a new windowBS EN 12896-2 Public Transport - Reference Data Model Part 2: Public Transport NetworkPublic Comment
BS EN 12896-3 Public Transport - Reference Data Model Part 3: Timing Information and Vehicle SchedulingPublic Comment
BS EN 13718-2 Medical vehicles and their equipment - Air ambulances Part 2: Operational and technical requirements of air ambulancesApproval
BS EN 16454 Intelligent transport systems - eSafety - eCall end to end conformance testingApproval
BS EN 16882 Road vehicles - Security of the mechanical seals used on tachograph systems - Requirements and test proceduresAccepted
BS EN 1865-1:2010/A1 Patient handling equipment used in road ambulances Part 1: General stretcher systems and patient handling equipmentPublication
BS EN 50436-5 Alcohol interlocks - Test methods and performance requirements Part 5: Instruments without a mouthpiece and measuring breath alcohol for general preventive useIdea
BS EN 60081:1998+A6 Ed.5.0 Double-capped fluorescent lamps - Performance specificationsPublic Comment
BS EN 60357:2003+A4 ED.3 Tungsten halogen lamps (non-vehicle) - Performance specificationsnull
BS EN 60630+A7 Maximum Lamp outlines for incandescent lampsPublication
BS EN 60809 Ed 2.0 /A6 Amendment 6 - Lamps for road vehicles - Dimensional; electrical and luminous requirementsAccepted
BS EN 60810 ED 4.0 Ed 3.0 /A3 Amendment 3 - Lamps for road vehicles - Performance requirementsPublic Comment
BS EN 60901: 1996+A6 Single-capped fluorescent lamps - Performance specificationsPublication
BS EN 60968 Self-ballasted fluorescent lamps for general lighting services - Safety requirementsPublication
BS EN 60968:2014+A1 Self-ballasted fluorescent lamps for general lighting services - safety requirementsnull
BS EN 60969 ED 2.0 Self-ballasted lamps for general lighting services - Performance require mentsPublic Comment
BS EN 60969:2013/prAA:2014 Self-ballasted compact fluorescent lamps for general lighting services - Performance requirementsnull
BS EN 61167 Am1 Metal halide lamps - Performance specificationAccepted
BS EN 61167+A1 Metal halide lamps - Performance specificationPublication
BS EN 61851-1 Ed 3.0 Electric vehicle conductive charging system Part 1: General requirementsPublic Comment
BS EN 61851-21 Ed 2.0 Review Report on IEC 61851-21 Ed. 1.0: Electric vehicle conductive charging system Part 21: Electric vehicle requirements for conductive connection to an a.c./d.c. supplyAccepted
BS EN 61851-21-1 Electric vehicle conductive charging system Part 21-1 Electric vehicle onboard charger EMC requirements for conductive connection to a.c./d.c. supplyPublic Comment
BS EN 61851-21-2 Electric vehicle conductive charging system Part 21-1: EMC requirments for OFF board electric vehicle charging systemsAccepted
BS EN 61851-22 Ed 2.0 Electric vehicle conductive charging system Part 22: a.c. electric vehicle charging stationAccepted
BS EN 61851-3-5 Electric vehicles conductive power supply system Part 3-5: Requirements for Light Electric Vehicles (LEV) communication - Pre-defined communication parametersAccepted
BS EN 61851-3-6 ELECTRIC VEHICLES CONDUCTIVE POWER SUPPLY SYSTEM Part 3-6; Requirements for Light Electric Vehicles (LEV) communication - Voltage converter unitAccepted
BS EN 61851-3-7 ELECTRIC VEHICLES CONDUCTIVE POWER SUPPLY SYSTEM Part 3-7; Requirements for Light Electric Vehicles (LEV) communication - Battery systemAccepted
BS EN 61980 Electric vehicle inductive charging systems Part 1 General requirementsPublic Comment
BS EN 62031 Ed 2.0 LED modules for general lighting - Safety specificationsAccepted
BS EN 62035: A1 Discharge lamps (excluding fluorescent lamps) - Safety specificationsAccepted
BS EN 62532+A1 Fluorescent induction lamps - Safety specificationsPublic Comment
BS EN 62560:2012+A1 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications Amendment 1Publication
BS EN 62612 +A1 Self-ballasted LED lamps for general lighting services with supply voltages IECXXXYYY2 50V - Performance requirements Amendment 1Public Comment
BS EN 62663-1 Non-self-ballasted LED lamps Part 1: Safety requirementsPublic Comment
BS EN 62663-2 Non-ballasted single capped LED lamps for general lighting - Part 2: Performance requirementsAccepted
BS EN 62717 Ed 1.0 /A1 Amendment 1 - LED modules for general lighting - Performance requirementsPublic Comment
BS EN 62717 LED modules for general lighting - Performance requirementsPublication
BS EN 62717/prAA:2014 LED modules for general lighting - Performance requirementsnull
BS EN 62838 Self-ballasted LED-lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. - Safety specificationApproval
BS EN 62840-1 Ed1.0 Electric vehicle battery swap system Part 1: System description and general requirementsApproval
BS EN 62840-2 ELECTRIC VEHICLE BATTERY SWAP SYSTEM Part 2: Safety requirementsAccepted
BS EN 62868 Organic light emitting diode (OLED) panels for general lighting - Safety requirementsPublication
BS EN 62922 Organic light emitting diode (OLED) panels for general lighting - Performance requirementsPublic Comment
BS EN 62931 GX16t-5 capped tubular LED lamp - Safety specificationsAccepted
BS EN61980-2 Electric vehicle inductive charging systems Part 2 Manual connection system using paddleIdea
BS ENISO 12813 check communication for autonomous systemsApproval
BS ENISO 12855 Electronic fee collection - Information exchange between service provision and toll chargingTechnical Review
BS ENISO 14823 data dictionaryAccepted
BS ENISO 14906:2011/Amd 1 Application interface definition for dedicated short-range communication - Amendment 1Publication
BS ENISO 15008 Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and test procedures for in-vehicle visual presentationAccepted
BS ENISO 15118-1 Road vehicles - Vehicle to grid communication interface Part 1: General information and use-case definitionApproval
BS ENISO 17575-1 interface definition for autonomous systems Part 1: ChargingApproval
BS ENISO 17575-2 interface definition for autonomous systems Part 2: Communication and connection to the lower layersApproval
BS ENISO 17575-3 interface definition for autonomous systems Part 3: Context dataApproval
BS ENISO 17575-4 interface definition for autonomous systems Part 4: RoamingTechnical Review
BS ENISO 19061 EN ISO 19061: Intelligent transport systems ? Automatic Vehicle andEquipment Registration (AVI/AEI) ? Interoperable application profile forAVI/AEI and Electronic Register Identification using dedicated short rangecommunicationIdea
BS ENISO 24014-1 Intelligent transport systems - Interoperable fare management system Part 1: ArchitectureApproval
BS ENISO 24534-3 Intelligent transport systems - Automatic vehicle and equipment identification - Electronic registration identification (ERI) for vehicles Part 3: Vehicle dataPublic Comment
BS ISO 10231:2003/AMD 1+A1 Motorcycles tyres - Test methods for verifying tyre capabilitiesPublication
BS ISO 10571 Tyres for mobile cranes and similar specialized machinesPublic Comment
BS ISO 10924-4 Road vehicles - Circuit breakers - Part 4: Medium circuit breakers with tabs (Blade type), CB15Public Comment
BS ISO 10924-5 Road vehicles - Circuit breakers - Part 5: Circuit breakers with rated voltage of 450 V.Public Comment
BS ISO 11067 Intelligent transport systems - Curve speed warning systems (CSWS) - Performance requirements and test proceduresApproval
BS ISO 11451-1 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminologyPublication
BS ISO 11451-2 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Off-vehicle radiation sourcesPublication
BS ISO 11451-3 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 3: On-board transmitter simulationPublication
BS ISO 11452-1 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminologyPublication
BS ISO 11452-8 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 8: Immunity to magnetic fieldsPublication
BS ISO 11898-1 Road vehicles - Controller area network (CAN) Part 1: Data link layer and physical signallingPublic Comment
BS ISO 11898-2 Road vehicles - Controller area network (CAN) - Part 2:High-speed medium access unitAccepted
BS ISO 11992-1 Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles Part 1: Physical and data-link layersIdea
BS ISO 11992-3 Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles Part 3: Application layer for equipment other than brakes and running gearIdea
BS ISO 13111-1 Intelligent transport systems - The use of personal ITS station to support ITS service provision for travellers Part 1: General information and use cases definitionAccepted
BS ISO 13140-1 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 Part 1: Test suite structure and test purposesAccepted
BS ISO 13143-1 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 Part 1: Test suite structure and test purposesAccepted
BS ISO 13143-2 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 Part 2: Abstract test suiteAccepted
BS ISO 13184-2 Intelligent transport systems - Guidance protocol via personal ITS station for advisory safety systems Part 2: Road guidance protocol (RGP) requirements and specificationPublic Comment
BS ISO 13400-3 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 3: Wired vehicle interface based on IEEE 802.3Accepted
BS ISO 13400-4 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) Part 4: Ethernet Diagnostic ConnectorPublic Comment
BS ISO 13674-2 Road vehicles - Test method for the quantification of on-centre handling Part 2: Transition testPublic Comment
BS ISO 14296 Intelligent Transport Systems - Extension of map database specifications for applications of cooperative ITSPublic Comment
BS ISO 14813-1.2 Reference model architecture(s) for the ITS sector Part 1: ITS service domains, service groups and servicesPublic Comment
BS ISO 14817-1 Intelligent transport systems - ITS central data registry Part 1: Requirements for an ITS central data registryPublic Comment
BS ISO 14817-2 Intelligent transport systems - ITS central data registry Part 2: Governance of the Central ITS Data Concept RegistryPublic Comment
BS ISO 14817-3 Intelligent transport systems - ITS central data registry and data dictionaries Part 3: Object identifier assignments for ITS data conceptsPublic Comment
BS ISO 14827-3 Intelligent transport Systems - Data interfaces between centres for Intelligent transport systems Part 3: Data interfaces between centres for Intelligent Transport Systems (ITS) using XMLAccepted
BS ISO 15031-3 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics Part 3: Diagnostic connector and related electrical circuits, specification and usePublic Comment
BS ISO 15031-5 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics Part 5: Emissions-related diagnostic servicesPublication
BS ISO 15031-6 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics Part 6: Diagnostic trouble code definitionsPublication
BS ISO 15082 Road vehicles - Tests for rigid plastic safety glazing materialsPublic Comment
BS ISO 15118-3 Road vehicles - Vehicle to grid communication interface Part 3: Physical layer and data link layer requirementsPublication
BS ISO 15118-7 Road vehicles - Vehicle to grid communication interface Part 7: Network and application protocol requirements for wireless communicationIdea
BS ISO 15118-8 Road vehicles - Vehicle to grid communication interface Part 8: Physical layer and data link layer requirements for wireless communicationIdea
BS ISO 15638-1 Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 1: Framework and architecturePublication
BS ISO 15638-10 Intelligent transport systems - Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 10: Emergency messaging system/eCall (EMS)Accepted
BS ISO 15638-13 Intelligent transport systems - Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 13: Mass Penalties and Levies (VMC)Accepted
BS ISO 15638-18 Intelligent transport systems - Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 18: ADR (Dangerous Goods) transport monitoring (ADR)Accepted
BS ISO 15638-19 Intelligent transport systems - Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 19: Vehicle parking facilities (VPF)Accepted
BS ISO 15638-9 Intelligent transport systems - Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 9: Remote electronic tachograph monitoring (RTM)Accepted
BS ISO 15765-2 Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) - Part 2: Transport protocol and network layer services.Public Comment
BS ISO 15765-4 Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) Part 4: Requirements for emissions-related systemsPublic Comment
BS ISO 15784-2.2 Data Exchange Involving Roadside Modules Communication Part 2: Application Profile - SNMPApproval
BS ISO 16460 Intelligent transport systems - Communications access for land mobiles (CALM) - Single-hop communications protocol messages for global usageIdea
BS ISO 16461 Intelligent transport systems - Criteria for privacy and integrity protection in probe vehicle information systemsIdea
BS ISO 16787 Intelligent Transport Systems - Assisted Parking System (APS) - Parking with reference to other parked vehicles - Performance and Test ProceduresAccepted
BS ISO 16845-1 Road vehicles - Controller area network (CAN) conformance test plan - Part 1:Data link layer and physical signalingAccepted
BS ISO 17185-2 Intelligent transport systems - Public transport user information Part 2: Data and interface standards catalogue and cross referenceAccepted
BS ISO 17409 Electrically propelled road vehicles - Connection to an external electric power supply - Safety requirementsApproval
BS ISO 17438-1 Intelligent transport systems (ITS) - Indoor navigation for personal and vehicle ITS stations Part 1: General information and use case definitionPublic Comment
BS ISO 17438-4 Intelligent transport systems (ITS) - Indoor navigation for personal and vehicle ITS stations Part 4: Requirements and specification for interface between Personal/Vehicle and Central ITS stationsIdea
BS ISO 17449 Road vehicles - Safety glazing materials - Test methods for properties of electrically heated glazingPublic Comment
BS ISO 17464 Pneumatic tubes for automotive vehicles - Technical requirements and test methodsPublic Comment
BS ISO 17488 Road vehicle - Transport information and control systems - Detection-Response Task (DRT) for assessing attentional effects of cognitive load in drivingPublic Comment
BS ISO 17515-1 Intelligent transport systems - Communications access for land mobiles (CALM) - Evolved Universal Terrestrial Radio Access Network (E-UTRAN) Part 1: General usagePublic Comment
BS ISO 17626-1 Road vehicles - Anthropomorphic frontal impact dummy - Frontal impact response requirements to assess the biofidelity of the dummy Part 1: ThoraxAccepted
BS ISO 17626-2 Road vehicles - Anthropomorphic frontal impact dummy - Frontal impact response requirements to assess the biofidelity of the dummy Part 2: AbdomenAccepted
BS ISO 17626-3 Road vehicles - Anthropomorphic frontal impact dummy - Frontal impact response requirements to assess the biofidelity of the dummy Part 3: Knee - Thigh - HipAccepted
BS ISO 17626-4 Road vehicles - Anthropomorphic frontal impact dummy - Frontal impact response requirements to assess the biofidelity of the dummy Part 4: Lower legAccepted
BS ISO 17840-1 Road vehicles - Information for first and second responders - Part 1: Rescue sheet for passenger cars and light commercial vehiclesPublication
BS ISO 17840-2 Road vehicles - Information for first and second responders Part 2: Rescue sheet for busses, coaches and heavy commercial vehiclesIdea
BS ISO 17840-3 Road vehicles - Information for first and second responders Part 3: Rescue and training manualsIdea
BS ISO 17840-4 Road vehicles - Information for first and second responders Part 4: Drive line identification signsIdea
BS ISO 17931 Intelligent transport systems - Extension of map database specifications for Local Dynamic Map for applications of Cooperative ITSAccepted
BS ISO 17987-1 Road vehicles - Local interconnect network (LIN) - Part 1: General information and use case definitionPublic Comment
BS ISO 17987-2 Road vehicles - Local interconnect network (LIN) - Part 2: Transport protocol and network layer servicesPublic Comment
BS ISO 17987-3 Road vehicles - Local interconnect network (LIN) - Part 3: Protocol specificationPublic Comment
BS ISO 17987-4 Road vehicles - Local interconnect network (LIN) - Part 4: Electrical Physical Layer (EPL) specification 12V/24VPublic Comment
BS ISO 17987-5 Road vehicles - Local interconnect network (LIN) - Part 5: Application Programmers Interface (API)Public Comment
BS ISO 17987-6 Road vehicles - Local interconnect network (LIN) - Part 6: Protocol conformance test specificationPublic Comment
BS ISO 17987-7 Road vehicles - Local interconnect network (LIN) - Part 7: Electrical Physical Layer (EPL) conformance test specificationPublic Comment
BS ISO 18106 Truck and bus tyres - Methods for measuring snow grip performance - Loaded new tyresPublic Comment
BS ISO 18300 Electrically propelled road vehicles - Specifications for lithium-ion cell and battery coupled with other types of battery and capacitorPublic Comment
BS ISO 18317 Intelligent transport systems - Pre-emption of ITS communication networks for disaster relief and emergency communicationsIdea
BS ISO 18375 Heavy commercial vehicles and buses - Test method for yaw stability - Sine with dwell testPublic Comment
BS ISO 18495-1 Intelligent transport systems - Commercial freight - Automotive visibilty in the distribution supply chain - Part 1: Architecture and data definitionsPublic Comment
BS ISO 18682 Intelligent transport systems - External hazard detection and notification systems - Basic requirementsAccepted
BS ISO 18804 Rims for agricultural, forestry and construction machinesPublic Comment
BS ISO 18805 Tyre classificationPublic Comment
BS ISO 18807 Tyres and rims for logging and forestry servicePublic Comment
BS ISO 18885-1 TPMS snap-in valves Part 1: IdentificationAccepted
BS ISO 18885-2 TPMS snap-in valves Part 2:Valve environmentAccepted
BS ISO 19079 Intelligent Transport Systems - Communications access for land mobiles (CALM) - 6LoWPAN networkingAccepted
BS ISO 19080 Intelligent Transport Systems - Communications access for land mobiles (CALM) - CoAP facilityAccepted
BS ISO 19082 Intelligent transport systems - Architecture for signal control systems utilizing information collected by vehicle-to-infrastructure communicationIdea
BS ISO 19083-1 Intelligent transport systems - Public transport - Emergency evacuation and disaster response and recovery Part 1: FrameworkPublic Comment
BS ISO 19083-2 Intelligent transport systems - Public transport - Emergency evacuation and disaster response and recovery Part 2: Data flowIdea
BS ISO 19237 Intelligent Transport Systems - Pedestrian Collision Mitigation Systems - Operation, Performance, and Verification RequirementsAccepted
BS ISO 19346 Elastic belt drives - V-ribbed belts, PH, PJ, PK and PL profiles Determination of physical propertiesIdea
BS ISO 19347 Synchronous belt drives - belt and pulleysApproval
BS ISO 19363 Electrically propelled road vehicles - Inductive wireless connection to an external electric power supply - Interoperability and Safety requirementsIdea
BS ISO 19364 Passenger cars - Vehicle dynamic simulation and validation - Steady-state circular driving behaviourPublic Comment
BS ISO 19365 Passenger cars - Vehicle dynamic simulation and validation - Sine with dwell stability control testingPublic Comment
BS ISO 19377 Heavy commercial vehicles - Emergency braking on a defined path - Test method for trajectory measurementsPublic Comment
BS ISO 19380 Heavy commercial vehicles and buses - Centre of gravity measurements - Tilt-table, axle lift, and stable pendulum test methodsIdea
BS ISO 19414 Intelligent transport systems - Service architecture of probe vehicle systemsIdea
BS ISO 19447 Passenger car tyres - Method for measuring ice grip performance Loaded new tyresIdea
BS ISO 19453-1-1 and testing for electrical and electronic equipment for drive system of electric propulsion vehicles Part 1: GeneralIdea
BS ISO 19453-2 Road vehicles - Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles Part 2: Mechanical loadsIdea
BS ISO 19453-3 Road vehicles - Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles Part 3: Climatic loadsIdea
BS ISO 19453-4 Road vehicles - Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles Part 4: Chemical loadsIdea
BS ISO 19585 Heavy commercial vehicles and buses - Vehicle dynamics simulation and validation - Steady-state circular driving behaviorIdea
BS ISO 19586 Heavy commercial vehicles and buses - Vehicle dynamics simulation and validation - Lateral dynamic stability of vehicle combinationsIdea
BS ISO 19940 Tyre Stiffness Index testing procedure for Passenger Extended Mobility tyresIdea
BS ISO 20076 Road Vehicles - Test methods and performance requirements for high voltage connectorIdea
BS ISO 20077-1 Road Vehicles - Extended Vehicle Part 1: General informationIdea
BS ISO 20077-2 Road Vehicles - Extended Vehicle Part 2: Methodology for designing the extended vehicleIdea
BS ISO 20080 Road vehicles - Information for remote diagnostic support - General requirements, definitions and use casesIdea
BS ISO 21210:2012/Amd 1 Intelligent transport systems - Communications access for land mobiles (CALM) - IPv6 Networking - Amendment 1Public Comment
BS ISO 21214 Intelligent transport systems - Communications access for land mobiles (CALM) - Infra-red systemsPublication
BS ISO 21750 Road vehicles - Safety enhancement in conjunction with tyre inflation pressure monitoringAccepted
BS ISO 22179 Intelligent transport systems - Full speed range adaptive cruise control (FSRA) systems - Performance requirements and test proceduresAccepted
BS ISO 22900-2 Road vehicles - Modular vehicle communication interface (MVCI) Part 2: Diagnostic protocol data unit application programming interface (D-PDU API)Public Comment
BS ISO 22901-3 Road vehicles - Open diagnostic data exchange (ODX) - Part 3: Fault symptom exchange description (FXD)Public Comment
BS ISO 23013 Road vehicles — Determination to forced entry of safety glassconstructions used in vehicle glazing — Test of glazing systemsPublic Comment
BS ISO 23671 Passenger car tyres - Method for measuring relative wet grip performance - Loaded new tyresPublication
BS ISO 24102-1:2013/Amd 1 Intelligent transport systems - Communications access for land mobiles (CALM) - ITS station management Part 1: Local management - Amendment 1Public Comment
BS ISO 24102-2 Intelligent transport systems - Communications access for land mobiles (CALM) - ITS station management Part 2: Remote managementPublic Comment
BS ISO 24102-3:2013/Amd 1 Intelligent transport systems - Communications access for land mobiles (CALM) - ITS station management Part 3: Service access points - Amendment 1Public Comment
BS ISO 24102-4:2013/Amd 1 Intelligent transport systems - Communications access for land mobiles (CALM) - ITS station management Part 4: Station-internal management communications - Amendment 1Public Comment
BS ISO 24102-5:2013/Amd 1 Intelligent transport systems - Communications access for land mobiles (CALM) - ITS station management Part 5: Fast service advertisement protocol (FSAP) - Amendment 1Public Comment
BS ISO 2575:2010/Amd 5 Road vehicles - Symbols for controls, indicators and tell-tales - Amendment 5Approval
BS ISO 27145-4 Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements Part 4: Connection between vehicle and test equipmentPublic Comment
BS ISO 28580 Passenger car, truck and bus tyres - Methods of measuring rolling resistance - Single point test and correlation of measurement resultsIdea
BS ISO 29061-3 Road vehicles - Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems Part 3: Installation of child restraint systems using vehicle seat beltsAccepted
BS ISO 29061-4 Road vehicles - Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems Part 4: Securing of child in child restraint system and daily handling aspectsAccepted
BS ISO 29061-5 Road vehicles - Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems Part 5: Installation and securing of child in a booster seatAccepted
BS ISO 29281-1:2013/Amd 1 Intelligent transport systems - Communication access for land mobiles (CALM) - Non-IP networking Part 1: Fast networking & transport layer protocol (FNTP) - Amendment 1Public Comment
BS ISO 29802 All terrain (AT) tyres and rims - Symbol marked pneumatic tyres on 5 degrees tapered rims - Designation, dimension, marking and load ratings.Accepted
BS ISO 3006 Road vehicles - Passenger car wheels for road use - Test methodsAccepted
BS ISO 3006 Road vehicles - Passenger car wheels for road use - Test methodsPublication
BS ISO 3536 Road vehicles - Safety glazing materials - VocabularyAccepted
BS ISO 3894 Road vehicles - Wheels/rims for commercial vehicles - Test methodsPublication
BS ISO 3917 Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weatheringPublic Comment
BS ISO 4000-1 Passenger car tyres and rims - Part 1: Tyres (metric series)Approval
BS ISO 4223-1 Definitions of some terms used in the tyre industry Part 1: Pneumatic tyresAccepted
BS ISO 4251-1 Tyres (ply rating marked series) and rims for agricultural tractors and machines - Part 1: Tyre designation and dimensions, and approved rim contours.Public Comment
BS ISO 4251-2 Tyres (ply rating marked series) and rims for agricultural tractors and machines - Part 2: Tyre load ratingsPublic Comment
BS ISO 6469-1/AMD1 Electrically propelled road vehicles. Safety specifications On-board rechargeable energy storage system (RESS)null
BS ISO 6469-2/AMD1 Road vehicles. Safety specifications Vehicle operational safety means and protection against failuresnull
BS ISO 6469-4 Electrically propelled road vehicles - Safety specifications Part 4: Post crash electrical safety requirementsApproval
BS ISO 6487 Road vehicles - Measurement techniques in impact tests - InstrumentationApproval
BS ISO 6546 Road vehicles - Collection of accident data for evaluation of occupant restraint performancePublic Comment
BS ISO 7637-3 Road vehicles - Electrical disturbance by conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply linesPublic Comment
BS ISO 8820-3 Road vehicles - Fuse links - Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)Public Comment
BS ISO 8820-4 Road vehicles - Fuse-links - Part 4:Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures.Accepted
BS ISO 9563 Belt drives - Electrical conductivity of antistatic endless synchronous belts - Characteristics and test methodApproval
BS ISO/IEC 15118-4 Road vehicles - Vehicle to grid communication interface - Part 4: Network and application protocol conformance test.Accepted
BS ISO/IEC 15118-5 Road vehicles - Vehicle to grid communication interface - Part 5: Physical and data link layer conformance tests.Accepted
BS ISO/IEC 15118-6 interface Part 6: General information and use-case definition for wireless communicationAccepted
BS ISO/IEC 61851-22 ED2 Electric vehicle conductive charging system Part 22: A.C. electric vehicle charging stationAccepted
BS ISO/IEC 62752 In cable control and protectivedevice for mode 2 charging of electric road vehicles - (IC-RCD)Public Comment
BS ISO/TR 16786 Intelligent transport systems - The use of simulation models for evaluation of traffic management systems: input parameters and reporting template for simulation of traffic signal control systemsApproval
PD CEN/TS 13149-7 Public Transport - Road Vehicle Scheduling and Control Systems Part 7: IP-based Networking Inside A Vehicle, Network and System ArchitectureAccepted
PD CEN/TS 16157-6 Intelligent transport systems - DATEX II data exchange specifications for traffic management and information Part 6: Parking PublicationsApproval
PD CEN/TS 16405 CEN/TS 16405 Intelligent transport systems - eCall - Additional data concept specification for heavy goods vehiclesPublication
PD CEN/TS 16614-3 Timetable Exchange (NeTEx) Part 3 Public transport network fare information exchange formatApproval
PD CEN/TS 21219-18 Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) Part 18 : Traffic Flow and Prediction ( TPEG2-TFP)Publication
PD CEN/TS 21219-3 Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) Part 3 : TPEG2-UML to binary conversion rulesPublication
PD CEN/TS 21219-5 Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) Part 5 : service framework (TPEG2-SFW) to binary conversion rulesPublication
PD CEN/TS 21219-6 Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) Part 6 : Message Manamenetn Container ( TPEG2-MMC)Publication
PD CENISO/TR 17424Publication
PD CENISO/TS 18750 Co-operative systems - Definition of a global concept for local dynamic mapsPublication
PD EN PAS CCFL Cold cathode fluorescent lamps (CCFL) Performancenull
PD EN PAS CCFL Cold cathode fluorescent lamps (CCFL) Safetynull
PD EN PAS EEFL External Electrode Fluorescent Lamp (EEFL) Performancenull
PD EN PAS EEFL External Electrode Fluorescent Lamp (EEFL) Safetynull
PD IEC/PAS 62816-1 Ed 1.0 External Electrode Fluorescent Lamps Part 1: Safety SpecificationsApproval
PD IEC/TS 61851-3-1 Ed 1.0 Electric Vehicles conductive power supply system - Part 3-1: General Requirements for Light Electric Vehicles (LEV) AC and DC conductive power supply systemsAccepted
PD IEC/TS 61851-3-2 Ed 1.0 Electric Vehicles conductive power supply system - Part 3-2: Requirements for Light Electric Vehicles (LEV) DC off-board conductive power supply systemsAccepted
PD IEC/TS 61851-3-4 Ed 1.0 Electric Vehicles conductive power supply system - Part 3-4: Requirements for Light Electric Vehicles (LEV) communicationAccepted
PD IEC/TS 61980-2 Ed 1.0 Electric vehicle wireless power transfer (WPT) systems Part 2 specific requirements for communication between electric road vehicle (EV) and infrastructure with respect to wireless power transfer (WPT) systemsAccepted
PD IEC/TS 61980-3 Ed 1.0 Electric vehicle wireless power transfer (WPT) systems Part 3 specific requirements for the magnetic field power transfer systems.Accepted
PD IEC/TS 62612 Self-ballasted LED-lamps for general lighting services >50 V - Performan ce requirementsIdea
PD IEC/TS 62861 Guide to principal component reliability testing for LED light sources and LED luminairesAccepted
PD IEC/TS 62972 light emitting diode (OLED) products andrelated equipment - Terms and definitionsAccepted
PD ISO/PAS 19295 Electrically propelled road vehicles - Specification of voltage sub-classes for voltage class BIdea
PD ISO/PAS 19451-1 Application of ISO 26262:2011-2012 to SemiconductorsIdea
PD ISO/TR 12349-1 Road vehicles - Dummies for restraint system testing Part 1: Adult dummiesPublication
PD ISO/TR 12349-2 Road vehicles - Dummies for restraint system testing Part 2: Child dummiesPublication
PD ISO/TR 17185-3 Intelligent transport systems — Public transport user information Part 3: Use cases for journey planning systems and their interoperationPublication
PD ISO/TR 17427-10 Intelligent transport systems - Cooperative ITS Part 10: Driver distraction and information displayApproval
PD ISO/TR 17427-11 Intelligent transport systems - Cooperative ITS Part 11: Compliance and enforcement aspectsAccepted
PD ISO/TR 17427-12 Intelligent transport systems - Cooperative ITS Part 12: Release processesAccepted
PD ISO/TR 17427-13 Intelligent transport systems - Cooperative ITS Part 13: Use case test casesAccepted
PD ISO/TR 17427-14 Intelligent transport systems - Cooperative ITS Part 14: Maintenance requirements and processesAccepted
PD ISO/TR 17427-2 Intelligent transport systems - Cooperative ITS Part 2: Framework OverviewApproval
PD ISO/TR 17427-3 Intelligent transport systems - Cooperative ITS Part 3: Concept of operations (ConOps) for 'core' systemsApproval
PD ISO/TR 17427-4 Intelligent transport systems - Cooperative ITS Part 4: Minimum system requirements and behaviour for core systemsApproval
PD ISO/TR 17427-5 Intelligent transport systems - Cooperative ITS Part 5: Effective approaches to securityAccepted
PD ISO/TR 17427-6 Intelligent transport systems - Cooperative ITS Part 6: 'Core system' risk assessment methodologyApproval
PD ISO/TR 17427-7 Intelligent transport systems - Cooperative ITS Part 7: Privacy aspectsApproval
PD ISO/TR 17427-8 Intelligent transport systems - Cooperative ITS Part 8: Liability aspectsApproval
PD ISO/TR 17427-9 Intelligent transport systems - Cooperative ITS Part 9: Compliance and enforcement aspectsApproval
PD ISO/TR 17465-2 Intelligent transport systems - Cooperative ITS Part 2: Guidelines for standards documentsApproval
PD ISO/TR 17465-3 Intelligent transport systems - Cooperative ITS Part 3: Release procedures for standards documentsApproval
PD ISO/TR 18561-1 Intelligent transport systems - The use of personal ITS station for green transport information and management Part 1: General information and use cases definitionAccepted
PD ISO/TR 19639 Electronic fee collection - Investigation of EFC standards for common payment schemes for multi-modal transport servicesPublication
PD ISO/TR 20545 Intelligent transport systems - Vehicle/roadway warning and control systems - Report on standardisation for vehicle automated driving systems (RoVAS)/Beyond driver assistance systemsAccepted
PD ISO/TR 24097-2 Intelligent transport systems - Using web services (machine-machine delivery) for ITS service delivery Part 2: Elaboration of interoperable web services' interfacesAccepted
PD ISO/TS 14907-1 procedures for user and fixed equipment Part 1: Description of test proceduresApproval
PD ISO/TS 15830-5 Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side impact dummy Part 5: Dummy design updatesIdea
PD ISO/TS 17426 Intelligent transport systems - Co-operative systems - Contextual speedsAccepted
PD ISO/TS 19091 Intelligent transport systems - Cooperative ITS - Using V2I and I2V communications for applications related to signalized intersectionsIdea
PD ISO/TS 19299 Electronic fee collection - Security frameworkApproval
PD ISO/TS 20026 Intelligent transport systems - Cooperative ITS - Test architectureIdea
PD ISO/TS 21219-1 Intelligent transport systems - Traffic and Travel Information via Transport Protocol Experts Group, generation 2 (TPEG2) Part 1: Introduction, numbering and versions (TPEG2-INV)Accepted
PD ISO/TS 21219-10 Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) Part 10: Conditional access information (TPEG2-CAI)Accepted
PD ISO/TS 21219-19 Intelligent transport systems - Traffic and travel information (TTI) via Transport protocol expert group, generation 2 (TPEG2) Part 19: Weather information application (TPEG2-WEA)Accepted
PD ISO/TS 21219-9 Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) Part 9: Service and network information (TPEG2-SNI)Accepted

[ back to top ]

Recently Viewed
Need Help?

We are here to help you with any queries. Email us for help.

But first, why not view the Help Pages?