Skip to content
RSS feed for this category

General

Standards in development (795)

Sort by: Title | Status

Standard TitleStatus
BS ISO 14323 Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testingApproval
BS 1363-1 13 A plugs, socket outlets, adaptors and connection units Part 1: Specification for rewirable and non-rewirable 13 A fused plugsnull
BS 1363-2 13 A plugs, socket outlets, adaptors and connection units Part 2: Specification for 13 A switched and unswitched socket-outletsnull
BS 1363-3 13 A plugs, socket-outlets, adaptors and connection units Part 3: Specification for adaptorsnull
BS 1363-4 13 A plugs, socket-outlets, adaptors and connection units Part 3: Specification for 13 A fused connection units switched and unswitchednull
BS 1363-5 13 A plugs, socket-outlets, adaptors and connection units Part 3: Specification for 13 A fused connection units switched and unswitchednull
BS 55032 Ed.2 Amd 1 ED.2 A1 F3 Electromagnetic compatibility of multimedia equipment - Emission requirementsPublic Comment
BS 6259 Code of practice for the design, planning, installation, testing and mai ntenance of sound systemsPublic Comment
BS 8546 Multiple or simple travel adaptors with compatibility with UK plug andsocket system - SpecificationIdea
BS EN 00150052 Industrial trucks - Safety requirements and verification - Regional requirements for countries within the European Community (ISO/TS 3691-7:2010: modified)Accepted
Opens a new windowBS EN 12368 Traffic control equipment - Signal headsApproval
BS EN 12392 Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipmentPublic Comment
BS EN 125:2010 +A1 Flame supervision devices for gas burning appliances - Thermo-electric flame supervision devicesPublic Comment
BS EN 126:2012 +A1 burning appliances/Amendment 1Accepted
BS EN 12675 Traffic signal controllers - Functional safety requirementsIdea
BS EN 12895 Industrial trucks - Electromagnetic compatibilityPublic Comment
BS EN 13611 Safety and control devices for burners and appliances burning gaseous or liquid fuels - General RequirementsTechnical Review
Opens a new windowBS EN 13765:2010/A1 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals — Specification/Amendment 1Approval
BS EN 1396 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - SpecificationsTechnical Review
BS EN 140402 Blank Detail Specification: Fixed low power wirewound surface mount (SMD) resistorsApproval
BS EN 140402-801 Detail specification: Fixed low power wirewound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2Idea
BS EN 14420-8:2013/A1 Hose fittings with clamp units Part 8: Symmetrical half coupling (Guillemin system)/Amendment 1Idea
BS EN 14459 Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessmentPublic Comment
BS EN 1459-1 and verification Part 1: Variable-reach trucksAccepted
BS EN 1459-2 Rough-terrain trucks - Safety requirements and verification Part 2: Slewing variable-reach trucksPublic Comment
BS EN 1459-3 Rough-terrain trucks - Safety requirements and verification Part 3: Additional requirements for variable reach trucks fitted with elevating work platformPublic Comment
BS EN 15195 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamberApproval
BS EN 15376 Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methodsApproval
BS EN 1559-4 Founding - Technical conditions of delivery Part 4: Additional requirements for aluminium alloy castingsTechnical Review
BS EN 15694:2009/A1 Agricultural and forestry tractors - Passenger seat - Requirements and test proceduresPublic Comment
BS EN 1570-1:2011/A1 Safety requirements for lifting tables – Part 1: Lifting tables serving up to two fixed landingsApproval
BS EN 1570-2 Safety requirements for lifting tables Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/sPublic Comment
BS EN 15811 Agricultural machinery - Guards for moving parts of power transmission - Guard opening with toolPublication
Opens a new windowBS EN 15940 Automotive fuels - Paraffinic diesel from synthesis or hydrotreatment - Requirements and test methodsAccepted
BS EN 16230-1:2013/A1 Leisure karts Part 1: Safety requirements and test methods for kartsApproval
BS EN 16230-2 Leisure karts Part 2: Safety requirements for tracksPublic Comment
BS EN 16601-00-01 Space system - Glossary of termsApproval
BS EN 16601-10 Space project management - Project planning and implementationApproval
BS EN 16602-20 Space product assurance - Quality assurancePublication
BS EN 16602-30-11 Space product assurance - Derating - EEE componentsPublication
BS EN 16602-40-12 Space product assurance - Fault tree analysis - Adoption notice ECSS/IEC 61025Publication
BS EN 16602-60 Space product assurance - Electrical, electronic and electromechanical (EEE) componentsApproval
BS EN 16602-60-02 Space product assurance - ASIC and FPGA developmentPublication
BS EN 16602-60-05 Space product assurance - Generic procurement requirements for hybridsPublication
BS EN 16602-60-12 Space product assurance - Design, selection, procurement and use of die form monolithic microwave integrated circuits (MMICs)Publication
BS EN 16602-60-13 Space product assurance - Requirements for the use of COTS componentsApproval
BS EN 16602-60-14 Space product assurance - Relifing procedure - EEE componentsPublication
BS EN 16602-60-15 Space product assurance - Radiation hardness assurance - EEE componentsPublication
BS EN 16602-70-01 Space product assurance - Cleanliness and contamination controlPublication
BS EN 16602-70-02 Space product assurance - Thermal vacuum outgassing test for the screening of space materialsPublication
BS EN 16602-70-03 Space product assurance - Black-anodizing of metals with inorganic dyesPublication
BS EN 16602-70-04 Space product assurance - Thermal testing for the evaluation of space materials, processes, mechanical parts and assembliesPublication
BS EN 16602-70-05 Space product assurance - Detection of organic contamination of surfaces by infrared spectroscopyPublication
BS EN 16602-70-06 Space product assurance Particle and UV radiation testing for space materialsPublication
BS EN 16602-70-07 Space product assurance - Verification and approval of automatic machine wave solderingPublication
BS EN 16602-70-08 Space product assurance - Manual soldering of high-reliability electrical connectionsApproval
BS EN 16602-70-09 Space product assurance - Measurements of thermo-optical properties of thermal control materialsPublication
BS EN 16602-70-10 Space product assurance - Qualification of printed circuit boardsPublication
BS EN 16602-70-11 Space product assurance - Procurement of printed circuit boardsPublication
BS EN 16602-70-13 Space product assurance - Measurements of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapesPublication
BS EN 16602-70-18 Space product assurance - Preparation, assembly and mounting of RF coaxial cablesPublication
BS EN 16602-70-20 Space product assurance - Determination of the susceptibility of silver-plated copper wire and cable to "red-plague" corrosionPublication
BS EN 16602-70-21 Space product assurance - Flammability testing for the screening of space materialsPublication
BS EN 16602-70-22 Space product assurance - Control of limited shelf-life materialsPublication
BS EN 16602-70-26 Space product assurance - Crimping of high-reliability electrical connectionsPublication
BS EN 16602-70-28 Space product assurance - Repair and modification of printed circuits board assemblies for space usePublication
BS EN 16602-70-29 Space product assurance - Determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartmentPublication
BS EN 16602-70-30 Space product assurance - Wire wrapping of high-reliability electrical connectionsPublication
BS EN 16602-70-31 Space product assurance - Application of paints on space hardwarePublication
BS EN 16602-70-36 Space product assurance - Material selection for controlling stress-corrosion crackingPublication
BS EN 16602-70-37 Space product assurance - Determination of the susceptibility of metals to stress-corrosion crackingApproval
BS EN 16602-70-45 Space product assurance - Mechanical testing of metallic materialsApproval
BS EN 16602-70-46 Space product assurance - Requirements for manufacturing and procurement of threaded fastenersApproval
BS EN 16602-70-50 Space product assurance Particles contamination monitoring for spacecraft systems and cleanroomsApproval
BS EN 16602-70-53 Space product assurance - Materials and hardware compatibility tests for sterilization processesApproval
BS EN 16602-70-55 Space product assurance - Microbial examination of flight hardware and cleanroomsApproval
BS EN 16602-70-56 Space product assurance - Vapour Phase Bioburden Reduction for Flight HardwareApproval
BS EN 16602-70-57 Space product assurance - Dry Heat Bioburden Reduction for Flight HardwareApproval
BS EN 16602-70-58 Space product assurance - Bioburden control of cleanroomsApproval
BS EN 16603-10-04 Space engineering - Space environmentApproval
BS EN 16603-20-01 Space engineering - Multipaction, design and testApproval
BS EN 16603-31 Space engineering - Thermal control general requirementsPublication
BS EN 16603-31-02 Space engineering - Two-phase heat transport equipmentApproval
BS EN 16603-50-01 Space engineering - Space data links - Telemetry synchronization and channel codingPublication
BS EN 16603-50-03 Space engineering - Space data links - Telemetry transfer frame protocolPublication
BS EN 16603-50-04 Space engineering - Space data links - Telecommand protocols, synchronization and channel codingPublication
BS EN 16603-50-52 Space engineering - SpaceWire - Remote memory access protocolPublication
BS EN 16603-50-53 Space engineering - SpaceWire - CCSDS packet transfer protocolApproval
BS EN 16603-60-30 Space engineering - Satellite AOCS requirementsApproval
BS EN 16603-70 Space engineering - Ground systems and operationsApproval
BS EN 16603-70-01 Space engineering - Spacecraft on-board control proceduresApproval
BS EN 16603-70-11 Space engineering - Space segment operabilityApproval
BS EN 16603-70-31 Space engineering - Ground systems and operations - Monitoring and control data definitionApproval
BS EN 16643 assemblies - Unbonded fluoroplastic lined (e. g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - SpecificationPublic Comment
BS EN 16666 Self-propelled agricultural machines - Road safety - Basic requirementsPublic Comment
BS EN 16678 Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6300 kPaPublic Comment
BS EN 16709 Automotive fuels - High FAME diesel blends (B10 - B30)- Requirements and test methodsPublic Comment
BS EN 16715 Liquid petroleum products - Determination of derived cetane number (DCN) of middle distillate, ignition and combustion delay using a constant volume combustion chamber methodPublic Comment
BS EN 16719 Transport PlatformsPublic Comment
BS EN 16734 Automotive fuels - Diesel containing 10%(V/V) of fatty acid methyl esters (FAME) - Requirements and test methodsPublic Comment
BS EN 16773 Aluminium and aluminium alloys - Guideline for the production thin foil in the field of containers for foodstuffs fabricationPublic Comment
BS EN 16803-1 Space - Use of geo-positioning services for navigation and localization applications Part 1: Minimum Operational Performances definition methodology for GNSS-based positioning terminals used in road transport applicationsAccepted
BS EN 1755 Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dustPublic Comment
BS EN 280:2013/A1:2013 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and testsPublic Comment
BS EN 45502-1 Active implantable medical devices Part 1: General requirements for safety, marking and information to be provided by the manufacturerPublication
BS EN 50066 Miniature connecting devices in carsnull
BS EN 50117-4-2 Coaxial cables Part 4-2: Sectional specification for CATV cables up to 6 GHz used in cables distribution networksIdea
BS EN 50121-1 Railway applications - Electromagnetic compatibility (EMC) Part 1: GeneralPublic Comment
BS EN 50121-2 Railway applications - Electromagnetic compatibility (EMC) Part 2: Emission of the whole railway system to the outside worldPublic Comment
BS EN 50121-3-1 Railway applications - Electromagnetic compatibility (EMC) Part 3-1: Rolling stock - Train and complete vehiclePublic Comment
BS EN 50121-3-2 Railway applications - Electromagnetic compatibility (EMC) Part 3-2: Rolling stock - Rolling stock apparatusPublic Comment
BS EN 50121-4 Railway applications - Electromagnetic compatibility (EMC) Part 4: Emission and immunity of the signalling and telecommunications apparatusPublic Comment
BS EN 50121-5 Railway applications - Electromagnetic compatibility (EMC) Part 5: Emission and immunity of fixed power supply installations and apparatusPublic Comment
BS EN 50123-6:2003/AAMD 1 Railway applications - Fixed installations - D.C. switchgear Part 6: D.C. switchgear assembliesApproval
BS EN 50124-1 Railway applications - Insulation coordination Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipmentIdea
BS EN 50124-2 Railway applications - Insulation coordination Part 2: Overvoltages and related protectionIdea
BS EN 50126-2 Railway applications The specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) Part 2: Systems Approach to SafetyPublic Comment
BS EN 50126-4 Railway applications The specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) Part 4: Functional Safety - Electric and electronic systemsPublic Comment
BS EN 50126-5 Railway applications The specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) Part 5: Functional Safety - SoftwarePublic Comment
BS EN 50155 Railway applications - Electronic equipment used on rolling stockAccepted
BS EN 50171 Central safety power supply systemsPublic Comment
BS EN 50174-1:2009/A2 Information technology - Cabling installation Part 1: Installation specification and quality assuranceAccepted
BS EN 50174-2:2009/A+A2 Information technology - Cabling installation Part 2: Installation planning and practices inside buildingsPublic Comment
BS EN 50180-1 and from 250 A to 3,15 kA for liquid filled transformersPublic Comment
BS EN 50180-2 Bushings above 1 kV up to 52 kV and from 250A to 3,15 kA for liquid filled transformers Part 2: Requirement for bushing componentsnull
BS EN 50180-3 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers Part 3: Requirement for bushing fixationsnull
BS EN 50288-10-2 Multi-element metallic cables used in analogue and digital communication and control Part 10-2: Sectional specification for screened cables characterized from 1 MHz up to 500 MHz - Horizontal and building backbone cablesPublic Comment
BS EN 50288-11-2 Multi-element metallic cables used in analogue and digital communication and control Sectional specification for un-screened cables, characterized from 1 MHz up to 500 MHz - Horizontal and building backbone cablesPublic Comment
BS EN 50288-9-2 Multi-element metallic cables used in analogue and digital communication and control Part 9-2: Sectional specification for screened cables characterised from 1 MHz uo to 1000 MHz - Work area, patch cord and data centre cablesPublic Comment
BS EN 50289-1-17 Communications cables – Specifications for test methods Part 1-17: Electrical test methods – Exogenous Crosstalk ExNEXT and ExFEXTAccepted
BS EN 50290-2-21:2001+A1:2007+Corr Common design rules and construction. PVC insulation compoundsnull
BS EN 50290-2-33 Communication cables Part 2-33: Common design rules and construction - Polyethylene for multi element metallic data cables for indoor applicationIdea
BS EN 50290-2-37 Communication cables Part 2-37: Common design rules and construction - Polyethylene insulation for coaxial cablesIdea
BS EN 50290-2-38 Communication cables Part 2-38: Common design rules and construction - Polypropylene insulation for coaxial cablesIdea
BS EN 50290-4-1 Ed.2 prEN 50290-4-1 ed.2 : Communication cables Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspectsApproval
BS EN 50290-4-2 Ed.2 prEN 50290-4-2 ed.2 : Communication cables Part 4-2: General considerations for the use of cables - Guide to useApproval
BS EN 50308 Wind turbines - Protective measures - Requirements for design, operation and maintenanceApproval
BS EN 50342-1 Lead-acid starter batteries Part 1: General requirements and methods of testAccepted
BS EN 50342-6 Lead-acid starter batteries Part 6: Batteries for Micro Cycle ApplicationsAccepted
BS EN 50342-7 Lead-acid starter batteries Part 7: General requirements, methods of tests and dimensions for motorcycle batteriesPublic Comment
BS EN 50367:2012 prA1 Railway applications - Current collection systems - Technical criteriafor the interaction between pantograph and overhead line (to achievefree access) (Requirements on gauges and contact strips)null
BS EN 50405 Railway applications - Current collection systems - Pantographs, testing methods for contact stripsAccepted
BS EN 50412-4 Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz Part 4: Low rate wide band services (LRWBS) operating between 2 MHz and 4 MHz - Channel allocationsPublic Comment
BS EN 50436-2:2014 +AA Alcohol interlocks - Test methods and performance requirements - Part 2:Instruments having a mouthpiece and measuring breath alcohol for preventive use.Approval
BS EN 50436-5 Alcohol interlocks - Test methods and performance requirements Part 5: Instruments without a mouthpiece and measuring breath alcohol for general preventive useIdea
BS EN 50436-6 Alcohol interlocks - Test methods and performance requirements Part 6: Data securityApproval
BS EN 50498 Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehiclesIdea
BS EN 50500:2008 Amd 1 levels generated by electronicand electrical apparatus in the railway environment with respect tohuman exposureApproval
BS EN 50502 Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and connection systemsPublic Comment
BS EN 50526-3 Railway Applications - Fixed Installations - D.C. surge arresters and voltage limiting devices Part 3: Application guidePublic Comment
BS EN 50556:2011/A Road traffic signal systemsIdea
BS EN 50561-2 Power line telecommunications modems - Radio disturbance characteristics - Limits and methods of measurement - Part 2: Modems for access networksIdea
BS EN 50561-3 Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and methods of measurement Part 3: Apparatus operating above 30 MHzPublic Comment
BS EN 50598-1 Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 1: General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA), and semi analytic model (SAM)Approval
BS EN 50598-2 Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 2: Energy efficiency indicators for power drive systems and motor startersApproval
BS EN 50598-3 Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 3: Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarationsPublic Comment
BS EN 50600-2-3 Electrical Aspects of Telecommunication EquipmentPublic Comment
BS EN 50600-2-6 Information technology - Data centre facilities and infrastructures Part 2--6: Management and operational informationAccepted
BS EN 50604-1 Secondary lithium batteries for LEV (Light Electric Vehicle) applications - Part 1: General safety requirements and test methodsPublic Comment
BS EN 50607 Satellite signal distribution over a single coaxial cable - Second generationAccepted
BS EN 50633 Railway applications - Fixed installations - Protection principles for electric traction systemsPublic Comment
BS EN 50641 Railway applications - Fixed installations - Requirements for the valida tion of simulation tools used for the design of traction power supply sy stemsPublic Comment
BS EN 50849 Sound systems for emergency purposesPublication
BS EN 50849 Sound systems for emergency purposesPublic Comment
BS EN 50882-11 Multi-element metalic cables used in analogue and digital communication and control Part 11: Sectional specification for un-screened cables, characterised up to 500 MHz, for horizontal and building backbone wiringPublic Comment
BS EN 536 Road construction machines - Mixing plants for road construction materials - Safety requirementsPublic Comment
BS EN 55011 Am1 f1 Ed.6.0 Industrial, scientific and medical equipment - Radio-frequencydisturbance characteristics - Limits and methods of measurementnull
BS EN 55011 FF3 ED 6 Supplement of CISPR 11 with the APD method and associated limits forasse ssment of fluctuating RF disturbances in the range above 1 GHzPublic Comment
BS EN 55012 Ed. 7.0 Vehicles, boats and internal combustion engines - Radio disturbancecharacteristics - Limits and methods of measurement for the protectionof off-board receiversAccepted
BS EN 55013:2013/A1 Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurementPublic Comment
BS EN 55014-1 Ed 6 - Requirements for household appliances, electric tools and similar apparatus - Part 1: EmissionPublic Comment
BS EN 55014-2/A3 Ed.1 Electromagnetic compatibility - Requirements for household appliances,el ectric tools and similar apparatus - Part 2: Immunity - Product family standardPublic Comment
BS EN 55015 Ed 8.0 /A1 Amendment 1 - Interference relating to household appliances tools; lighting equipment and similar apparatusPublic Comment
BS EN 55015 Ed 8.0 Am.1 (f3) Limits and methods of measurement of radio disturbance characteristicsof lighting and similar equipmentPublic Comment
BS EN 55015 Ed.8.0 Am.1 f2 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipmentPublic Comment
BS EN 55016-1-1/A3 ED 3 Requirements for calibration of measuring equipmentPublic Comment
BS EN 55016-1-1/AM2 ED3 Requirements when using an external preamplifier with a measuring receiverPublication
BS EN 55016-1-3 A1 Ed.2 Specification for radio disturbance and immunity measuring apparatus andmethods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance powerAccepted
BS EN 55016-1-4 Ed 3.0 /A2 Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurementsAccepted
BS EN 55016-1-5 am 1 Ed. 2.0 Specification for radio disturbance and immunity measuring apparatusandmethods – Part 1-5: Radio disturbance and immunity measuring apparatus – Antenna calibration sites and reference test sites for 5 MHz to 18 GHzPublic Comment
BS EN 55016-1-5 Specification for radio disturbance and immunity measuring apparatus and tests - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30 MHz to 1 000 MHzApproval
BS EN 55016-1-6 Ed 1.0 /A1 Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibrationPublic Comment
BS EN 55016-1-6 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC- antenna calibrationApproval
BS EN 55016-2-3 Am3 Ed 3.0 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiateddisturbance measurementsPublic Comment
BS EN 55020:2007+A1 Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurementPublication
BS EN 55025 ED.4.0 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers. Annex on ALSE Performance Verification 150 kHz - 1 GHzPublic Comment
BS EN 55032 Ed2 f1 equipment and receivers - Radio disturbance characteristics limits and methods of measurementPublic Comment
BS EN 55032 F1 ED. 2 A1 Electromagnetic compatibility of multimedia equipment - Emission requirementsPublic Comment
BS EN 55032 F2 Ed 2 A1 Electromagnetic compatibility of multimedia equipment - Emission requirementsPublic Comment
BS EN 55032:2013 F4 ED.2 Electromagnetic compatibility of multimedia equipment - Emission requirementsPublic Comment
BS EN 55032:2013 F5 ed2 Electromagnetic compatibility of multimedia equipment - Emission requirementsPublic Comment
BS EN 60050-651 International Electrotechnical Vocabulary Part 651: Live workingPublication
BS EN 60050-811 Ed. 2.0 International Electrotechnical Vocabulary (IEV) Part 811: Electric tractionAccepted
BS EN 60062 Ed 6.0 Marking codes for resistors and capacitorsAccepted
BS EN 60063 Preferred number series for resistors and capacitorsPublic Comment
BS EN 60077-1 Ed. 2.0 Railway applications - Electric equipment for rolling stock Part 1: General service conditions and general rulesIdea
BS EN 60077-2 Ed. 2.0 Electric equipment for rolling stock Part 2: Electrotechnical components - General rulesIdea
BS EN 60092-100-1 Electrical installations in ships Part 100-1: General - System design; general requirements and testsAccepted
BS EN 60092-100-2 Electrical installations in ships Part 100-2: General - Power supply and distribution; additional requirementsAccepted
BS EN 60092-100-3 Electrical installations in ships Part 100-3: General - Control and AutomationAccepted
BS EN 60092-100-4 Electrical installations in ships Part 100-4: General - Equipment; additional requirementsAccepted
BS EN 60092-101 Ed 5.0 Electrical installations in ships Part 101: Definitions and generalAccepted
BS EN 60092-201 Ed 5.0 Electrical installations in ships Part 201: System design - GeneralAccepted
BS EN 60092-201 Electrical installations in ships - Part 201: System design - General, clause 14: Shore connectionsAccepted
BS EN 60092-202 Ed 5.0 Electrical installations in ships Part 202: System design - ProtectionAccepted
BS EN 60092-502 ED 6.0 IEC 60092-502: Electrical installations in ships - Part 502: Tankers - Special featuresAccepted
BS EN 60092-504 Ed 4.0 Electrical installations in ships - Part 504: Automation, control and instrumentationAccepted
BS EN 60092-507 Ed 3.0 Electrical installations in ships Part 507: Small vesselsApproval
BS EN 60092-507 Electrical installations in ships Part 507: Small vesselsApproval
BS EN 60096-0-1 Ed.3 Amd 1 Radio frequency cables Part 0-1: Guide to the design of detail specifications - Coaxial cables, Amendment 1null
BS EN 60115-2 Fixed resistors for use in electronic equipment. Part 2: Sectional specification: Fixed low-power non-wirewound resistorsPublication
BS EN 60115-22014+A1 Fixed resistors for use in electronic equipment Part 2: Sectional specification: Leaded fixed low power film resistorsnull
BS EN 60115-8-1 Fixed resistors for use in electronic equipment Part 8-1: Blank detail specification - Fixed chip resistors. Assessment level EPublication
BS EN 60118-0 ED.3 Electroacoustics- Hearing aids- Part 0: measurement of the performance characteristics of hearing aids (Amalgamated revision of IEC 60118-0, IEC 60118-1, IEC 60118-2, IEC 60118-6)Public Comment
BS EN 60118-13 ED.4 Electroacoustics - Hearing aids Part 13: Electromagnetic compatability (EMC) (Revision of IEC 60118-13: 2011)Public Comment
BS EN 60118-4 ED.3 Electroacoustics - Hearing aids Part 4: Induction loop systems for hearing aid purposes - System performance requirementsApproval
BS EN 60153-1 HOLLOW METALLIC WAVEGUIDES Part 1: General requirements and measuring methodsPublic Comment
BS EN 60153-2 Ed 3.0 HOLLOW METALLIC WAVEGUIDES Part 2: Relevant specifications for ordinary rectangular waveguidesPublic Comment
BS EN 60154-1 Ed 3.0 FLANGES FOR WAVEGUIDES Part 1: General requirementsPublic Comment
BS EN 60154-2 Ed 3.0 FLANGES FOR WAVEGUIDES Part 2: Relevant specifications for flanges for ordinary rectangular waveguidesPublic Comment
BS EN 60195 Method of measurement of current noise generated in fixed resistorsAccepted
BS EN 60255-118-1 Measuring relays and protection equipment - Part 195: Functional requirements for synchrophasor measurementsAccepted
BS EN 60255-24 Measuring relays and protection equipment - Part 24 : Common format for transient data exchange (COMTRADE) for powersystemsPublication
BS EN 60286-2 Packaging of components for automatic handling Part 2: Tape packaging of components with unidirectional leads on continuous tapesPublic Comment
BS EN 60305 Insulators for overhead lines with a nominal voltage above 1000 V ceramic or glass insulator units for a a.c. systems - Characteristics of insulator units of the cap and pin typeAccepted
BS EN 60310 ED 4.0 Railway applications - Traction transformers and inductors on board rolling stockPublic Comment
BS EN 60318-3 ED.2 Electroacoustics - Simulators of human head and ear Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometryPublic Comment
BS EN 60335-1 A1 F1 ED 5 Household and similar electrical appliances - Safety - Part 1: General requirementsApproval
BS EN 60335-2-11/A1 Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryersPublication
BS EN 60335-2-24/A2/Ed7 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makersPublic Comment
BS EN 60335-2-24:2010+A1 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice- cream appliances and ice-makersPublication
BS EN 60335-2-24:2010/FprAA Household and similar electrical appliances - Safety - Part 2-24 Particular requirements for refrigerating appliances, ice-cream appliances abd ice makersPublic Comment
BS EN 60335-2-34/A1/Ed5 Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressorsPublic Comment
BS EN 60335-2-4: 2010/A1 Household and similar electrical appliances - Safety - Part 2-4 Particular requirements for spin extractorsPublication
BS EN 60335-2-5 Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashersPublication
BS EN 60335-2-58-A2/Ed3 Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machinesApproval
BS EN 60335-2-58:2005+A12 Household and similar electrical appliances – Safety – Part 2-58: Particular requirements for commercial electric dishwashing machinesPublication
BS EN 60335-2-89/A2/Ed2 Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incoporated or remote refrigerant unit or compressorPublic Comment
BS EN 60335-2-89:2010+A1 Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressorPublication
BS EN 60384-1 Fixed capacitors for use in electronic equipment - Part 1: Generic specificationPublic Comment
BS EN 60384-14 Ed 4.0 /A1 Fixed capacitors for use in electronic equipment Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mainsAccepted
BS EN 60384-14-1 Ed 3.0 Fixed capacitors for use in electronic equipment Part 14-1: Blank detail specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level DZAccepted
BS EN 60384-14-2 Ed 2.0 Fixed capacitors for use in electronic equipment Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Safety tests onlyAccepted
BS EN 60384-18 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyteAccepted
BS EN 60384-19 Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene- terephthalate film dielectric surface mount d.c. capacitorsPublic Comment
BS EN 60384-20 Fixed capacitors for use in electronic equipment Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitorsPublic Comment
BS EN 60384-23 Fixed capacitors for use in electronic equipment - Part 23: Sectional specification: Fixed surface mount metallized polyethylene naphthalate film dielectric d.c. capacitorsPublic Comment
BS EN 60384-24 Fixed capacitors for use in electronic equipment Part 24: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolytePublic Comment
BS EN 60384-25 Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolytePublic Comment
BS EN 60384-3 Fixed capacitors for use in electronic equipment - Part 3: Sectional specification: Surface mount fixed tantalum electrolyt capacitors with manganese dioxide solid electrolyteAccepted
BS EN 60384-4 Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyteAccepted
BS EN 60384-8 Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class1Public Comment
BS EN 60384-9 Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2Public Comment
BS EN 60433 Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic insulators for a.c. systems - Characteristics of insulator units of the long rod typeAccepted
BS EN 60533 Ed 3.0 Electrical and electronic installations in ships - Electromagnetic compatibilityPublic Comment
BS EN 60539-1 Directly heated negative temperature coefficient thermistors Part 1: Generic specificationPublic Comment
BS EN 60601-1-10 Medical electrical equipment Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllersApproval
BS EN 60601-1-11 Ed2.0 Medical electrical equipment Part 1-11: General requirements for basic safety and essential performance – Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environmentPublic Comment
BS EN 60601-1-2 Medical electrical equipment Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic disturbances - Requirements and testsApproval
BS EN 60601-1-6:2007/A1 Medical electrical equipment Part 1-6: General requirement for basic safety and essential performance - Collateral standard: UsabilityPublication
BS EN 60601-1:2006/AC Medical electrical equipment Part 1: General requirements for basic safety and essential performancePublication
BS EN 60601-2-16 Medical electrical equipment Part 2-16: Particular requirements for the basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipmentPublication
BS EN 60633:1999+A1:2009+A2 Terminology for high-voltage direct current (HVDC) transmissionPublic Comment
BS EN 60645-2 Audiometric equipment Part 2: Equipment for speech audiometryAccepted
BS EN 60669-1 ED 4.0 Switches for household and similar fixed-electrical installations General requirementsAccepted
BS EN 60669-2-1 ED 4.0/A2 A2 Switches for household and similar fixed electrical installations Part 2-1: Particular requirements - Electronic switchesApproval
BS EN 60669-2-5 ED 1.0 Switches for household and similar fixed electrical installations - Part 2-5: Switches and related accessories for use in home and building electronic systems (HBES)Publication
BS EN 60670-1 ED 2.0 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirementsApproval
BS EN 60670-21 ED 1.0/A1 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 21: Particular requirements for boxes and enclosures with provision for suspension meansAccepted
BS EN 60670-22 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 22: Particular requirements for connecting boxes and enclosuresApproval
BS EN 60670-23 ED 1.0/A1 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosuresAccepted
BS EN 60700-1 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testingPublic Comment
BS EN 60700-2 Thyristor valves for high-voltage direct current (HVDC) power transmission - Part 2: TerminologyAccepted
BS EN 60728-101 Cable networks for television signals; sound signals and interactive services - System performance for forward path with all digital channels loadAccepted
BS EN 60728-11 Ed 4.0 Cable networks for television signals; sound signals and interactive services Part 11: SafetyAccepted
BS EN 60728-3-2 Cable networks for television signals; sound signals and interactive services - IEC 60728; Part 3-X : Method of measurement of non-linearity for active equipment using five carriesAccepted
BS EN 60728-5 Ed 3.0 Cable networks for television signals; sound signals and interactive services Part 5: Headend equipmentPublic Comment
BS EN 60728-7-1 Ed 1.0 /A1 Amendment 1 - Cable networks for television signals; sound signals and interactive services Part 7-1: Hybrid Fibre Coax Outside Plant Status Monitoring - Physical (PHY) Layer SpecificationApproval
BS EN 60884-2-5 Ed 1.0/A1 for household and similar purposes – Part 2-5: Particular requirements for adaptorsIdea
Opens a new windowBS EN 609-1 Agricultural and forestry machinery - Safety of log splitters Part 1: Wedge splittersAccepted
BS EN 60939-3 Passive filter units for electromagnetic interference suppression Part 3: Standard for passive filter units for which safety tests are appropriatePublic Comment
BS EN 60940 Guidance information on the application of capacitors, resistors, inductors and complete filter units for radio interference suppression Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class1Public Comment
BS EN 60958-3 Ed 3.0 /A2 Amendment 2 - Digital audio interface Part 3: Consumer applicationsPublic Comment
BS EN 60958-4-1 Digital audio interface Part 4-1: Professional applications - Audio Content (TA 4)Accepted
BS EN 60958-4-2 Digital audio interface Part 4-2: Professional applications - Metadata and subcode (TA 4)Accepted
BS EN 60958-4-3 Digital audio interface Part 4-3: Professional applications Transport (TA 4)Accepted
BS EN 60958-4-4 Digital audio interface Part 4-4: Professional applications - Physical and electrical (TA 4)Accepted
BS EN 60966-1 Ed.3 Cables, wires, waveguides, r.f. connectors, and accessories for communication and signallingPublic Comment
BS EN 60966-2-4 Ed 4 Detail specification for cable assebmblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz, IEC 61196-2 connectorsPublic Comment
BS EN 60966-2-5 Ed 4 Detail specification for cable assebmblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz, IEC 61196-2 connectorsPublic Comment
BS EN 60966-2-6 Ed 4 Detail specification for cable assebmblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz, IEC 61196-24 connectorsPublic Comment
BS EN 60966-2-7 ED.1 Radio frequency and coaxial cable assemblies Part 2-7: Detail specification for cable assemblies for radio and TV recievers - Frequency range 0 MHz to 3000 MHz, IEC 61169-47 connectorsApproval
BS EN 60974-1 Arc wedling equipment Part 1: Welding power sourceAccepted
BS EN 60974-10 Ed 3.0 /A1 Amendment 1 - Arc wedling equipment Part 10: Electromagnetic compatibility (EMC) requirementsAccepted
BS EN 60974-6 Arc welding equipment Part 6: Limited duty equipmentPublic Comment
BS EN 61000-1-2 Ed1.0 Electromagnetic Compatibility (EMC) - Part 1-2: General – Methodology for the achievement of functional safetyof electrical and electronic systems including equipment with regard to electromagnetic phenomenaPublic Comment
BS EN 61000-3-11 Ed 2.0 Electromagnetic compatibility (EMC) Part 3-11: Limits - Limitation of voltage changes; voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current 75 A and subject to conditional connectionPublic Comment
BS EN 61000-3-2 Ed 5.0 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ? 16 A per phase)Public Comment
BS EN 61000-4-13 A2 Electromagnetic compatibilty (EMC) – Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity testsAccepted
BS EN 61000-4-16 A3 Electromagnetic compatibilty (EMC) – Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHzsAccepted
BS EN 61000-4-24 ED 2.0 Electromagnetic Compatibility (EMC) - Part 4-24: Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbancePublic Comment
BS EN 61000-4-30 ED 3 Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methodsPublic Comment
BS EN 61000-4-31 Electromagnetic compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity testPublic Comment
BS EN 61000-4-36 Electromagnetic Compatibility (EMC) - Part 4-36: Testing and measurement techniques - IEMI Immunity Test Methods for Equipment and SystemsPublic Comment
BS EN 61000-4-37 Electromagnetic compatibility (EMC) - Part 4-37: Testing and measurement techniques - Calibration and verification protocol for harmonic emission compliance test systemsPublic Comment
BS EN 61000-4-39 Ed. 1.0 Electromagnetic compatibilty (EMC) – Part 4-39: Testing and measurement techniques – Radiated fields in close proximity immunity testPublic Comment
BS EN 61000-4-9 Ed2.0 Ed 2.0 Electromagnetic Compatibility (EMC) – Part 4-9: Testing and measurement techniques – Impulse magnetic field immunity testPublic Comment
BS EN 61000-6-1 Ed3.0 Electromagnetic Compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environmentsAccepted
BS EN 61000-6-2 Ed3.0 Electromagnetic Compatibility (EMC) - Part 6-2: Generic standards - Generic standards - Immunity standard for industrial environmentsPublic Comment
BS EN 61000-6-3 ED 2.0/A2 Ed 2 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environmentsPublic Comment
BS EN 61000-6-4 ED 2.0/A2 Ed 2 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environmentsPublic Comment
BS EN 61000-6-5 Ed.1.0 Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for power station and substation environmentsPublic Comment
BS EN 61000-6-7 Electromagnetic compatibility (EMC) Part 6-7: Generic standards - Immunity requirements for safety-related systems and equipment intended to perform functions in a safety-related system (functional safety) in industrial environmentsApproval
BS EN 61010-2-202 Ed. 1.0 IEC 61010-2-202 Ed. 1.0 Safety requirements for electrical equipment for measurement, controland laboratory use - Part 2-2 xx: Particular requirements for electrically operated valve and actuatorAccepted
BS EN 61045-1 Fixed film resistor networks for use in electronic equipment - Part 1 : Generic specificationPublic Comment
BS EN 61058-1 Switches for appliances - Part 1: General requirementsPublic Comment
BS EN 61058-1-1 Switches for appliances - Part 1-1: Requirements for mechanical switch constructionsPublic Comment
BS EN 61058-1-2 Switches for appliances - Part 1-2: Requirements for electronic switch constructionsPublic Comment
BS EN 61069-1 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment -Part 1:Terminology and basic conceptsAccepted
BS EN 61069-2 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 2: Assessment methodologyAccepted
BS EN 61069-3 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 3: Assessment of system functionalityAccepted
BS EN 61069-4 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 4: Assessment od system performanceAccepted
BS EN 61069-5 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 5: Assessment of system dependabilityAccepted
BS EN 61069-6 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 6: Assessment of system operabilityAccepted
BS EN 61069-7 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 7: Assessment of system safety hazardAccepted
BS EN 61069-8 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 8: Assessment of other system propertiesAccepted
BS EN 61094-3 ED.2 Electroacoustics - Measurement microphones Part 3: Primary method for free field calibration of laboratory standard microphones by the reciprocity techniqueAccepted
BS EN 61094-5 Ed 2.0 Measurement microphones Part 5: Methods for pressure calibration of working standard microphones by comparisonAccepted
BS EN 61131-2 Ed 4.0 Industrial-process measurement and control - Programmable controllers Part 2: Equipment requirements and testsAccepted
BS EN 61156-10 Ed1.0 pair/quad cables for digitial communications Part 10: Cables for work area wiring with transmission characteristics up to 2 GHz - Sectional specificationPublic Comment
BS EN 61156-9 Ed1.0 pair/quad cables for digitial communications Part 9: Cables for horizontal floor wiring with transmission characteristics up to 2 GHz - Sectional specificationPublic Comment
BS EN 61169-11 Radio-frequency connectors Part 11: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9.5 mm with threaded coupling - characteristic impedance 50 ohm (Type 4.1-9.5)Accepted
BS EN 61169-47 Ed 2.0 Radio-Frequency Connectors Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 ? cable networks (type F- Quick)Public Comment
BS EN 61169-48 Ed.1 Radio-frequency connectors - Part 48: Sectional specification for BMP Series Blind mating R.F. coaxial connectorsPublic Comment
BS EN 61169-49 Ed 1.0 Radio-frequency connectors - Part 49: Sectional specification for SMAA series R.F connectorsPublication
BS EN 61169-50 Ed1.0 Radio-frequency connectors Part 50: Sectional specifications RF coaxial connectors with inner diameter of outer conductors 4.11 mm with quick lock system. Characteristics impendance 50 Ohm (type QMA)Public Comment
BS EN 61169-51 Ed1.0 Radio-frequency connectors - Part 51: Sectional specifications RF coaxial connectors with inner diameter of outer conductors 13.5 mm with bayonet lock characteristics impedamce 50 Ohm (type QLI)Approval
BS EN 61169-52 Ed1.0 Radio- Frequency Connectors Part 52: Sectional specification for series MMCX RF coaxial connectorsPublic Comment
BS EN 61169-53 Radio-frequency connectors Part 53: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 16 mm with screw lock -Characteristic impedance 50 ohm (Type S7-16)Accepted
BS EN 61169-54 RADIO-FREQUENCY CONNECTORS Part 54: Sectional Specification for Coaxial Connectors with 10mm inner of outer Conductor,nominal Characteristic Impedance 50 Ohms, Series 4.3- 10Public Comment
BS EN 61169-58 Radio-frequency connectors Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - characteristic impedance 50 ohm (type SBMA)Accepted
BS EN 61169-58 Radio-frequency connectors Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - characteristic impedance 50 ohm (type SBMA)null
BS EN 61196-1-110 Ed. 1.0 Coaxial communication cables Part 1-110: Electrical test methods - Test for continuityIdea
BS EN 61196-1-114 Ed. 1.0 Coaxial communication cables Part 1-114: Electrical test methods - InductancePublic Comment
BS EN 61196-1-116 Ed. 1.0 Coaxial communication cables Part 1-116: Electrical test methods - Test for characteristic impedance with time domain reflectometry (TDR)Public Comment
BS EN 61196-1-209 Ed. 1.0 Coaxial communication cables Part 1-209: Environmental test methods - Thermal cyclingAccepted
BS EN 61196-1-215 Ed1.0 Environmental test methods Part 1-215: High Temperature Cable AgeingAccepted
BS EN 61196-1-314 Ed2.0 Coaxial communication cables Part 1-314: Mechanical test methods - Test for bendingPublic Comment
BS EN 61196-10 Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polyterafluoroethylene (PTFE) dielectricApproval
BS EN 61196-10-1 Ed1.0 Coaxial Communication Cables Part 10-1: Blank detail specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectricPublication
BS EN 61196-11 Ed1.0 Coaxial communication cables Part 11: Sectional specification for semi-rigid cables with polyethylene (PE) dielectricPublic Comment
BS EN 61196-11-1 Ed.1 Coaxial communication cables Part 11-1: Blank detail specification for semi-rigid cables with polyethylene (PE) dielectricPublic Comment
BS EN 61196-4-1 Ed1.0 Coaxial communication cables Part 4-1: Blank detail specification for radiating cablesPublic Comment
BS EN 61196-9-1 Ed. 1.0 Coaxial communication cables Part 9-1: Blank detail specification for flexible RF coaxial cablesPublic Comment
BS EN 61204-7 Low-voltage switch mode power supplies - Part 7: Safety requirementsAccepted
BS EN 61242:1997+A1:2008+A2 Electrical accessories – cable reels for household and similar purposesAccepted
BS EN 61260-2 Ed1.0 and fractional-octave-band filters Part 2: Pattern evaluation testsPublic Comment
BS EN 61260-3 Ed1.0 and fractional-octave-band filters Part 3: Periodic testsPublic Comment
BS EN 61377 Ed. 2.0 Railway Applications - Rolling stock - Combined-testing of motors andtheir control systemPublic Comment
BS EN 61400-12-1 Ed 2.0 Wind turbines Part 12-1: Power performance measurements of electricity producing wind turbinesAccepted
BS EN 61400-13 Wind turbines Part 13: Measurement of mechanical loadsAccepted
BS EN 61400-2 ED 3.0 Wind turbines Part 2: Requirements for small wind turbinesPublication
BS EN 61400-21-1 Wind turbines Part 21-1: Measurement and assessment of electricalcharacteristics - Wind turbinesAccepted
BS EN 61400-23 ED 1.0 Wind Turbines - Part 23: Full-scale structural testing of rotor bladesPublic Comment
BS EN 61400-25-2 Ed 2.0 Wind turbines Part 25-2: Communications for monitoring and control of wind power plants - Information modelsPublic Comment
BS EN 61400-25-3 Ed 2.0 Wind turbines Part 25-3: Communications for monitoring and control of wind power plants - Information exchange modelsPublic Comment
BS EN 61427-2 Secondary cells and batteries for Renewable Energy Storage - General Requirements and methods of test Part 2: Photovoltaic on grid applicationPublic Comment
BS EN 61466-1 Composite string insulator units for overhead lines with a nominalvoltage greater that 1000 V - Part 1: Standard strength and end fittingsAccepted
BS EN 61511-1 ED.2.0 Functional Safety - Safety instrumented systems for the process industrysector - Normative Part 1: Framework, definitions, system, hardware and software requirementsPublic Comment
BS EN 61511-2 ED.2.0 Functional Safety - Safety instrumented systems for the process industrysector - Normative Part 2: Guidelines for the application of IEC 61511-1 - InformativePublic Comment
BS EN 61511-3 ED.2.0 Functional Safety - Safety instrumented systems for the process industrysector - Normative Part 3: Guidance for the determination of the required safety integrity levels - InformativePublic Comment
BS EN 61669 Ed.2 Electroacoustics - Measurement of real-ear acoustical performance characteristics of hearing aidsPublic Comment
BS EN 61726 ED.2 Cable assemblies, cables, connectors and passive coponents - screening attentuation measurement by the reverberation chamber methodPublic Comment
BS EN 61770: 2009/prAA: 2014 Electric appliances connected to the water mains - Avoidance ofbacksiphonage and failure of hose-setsPublic Comment
BS EN 61786-2 Measurement of low-frequency magnetic and electric fields with regard to exposure of human beings Part 2: Guidance for measurementsApproval
BS EN 61800-2 Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adj ustable frequency a.c. power drive systemsPublic Comment
BS EN 61800-3:2004+A1:2012+A2 Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methodsAccepted
BS EN 61800-5-1 Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energyIdea
BS EN 61800-5-2 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - FunctionalAccepted
BS EN 61800-7-1 Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definitionPublic Comment
BS EN 61800-7-201 Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specificationPublic Comment
BS EN 61800-7-202 Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specificationPublic Comment
BS EN 61800-7-203 Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specificationPublic Comment
BS EN 61800-7-204 Adjustable speed electrical power drive systems - Part 7-204: Generic interface and use of profiles for power drive systems - Profile type 4 specificationPublic Comment
BS EN 61800-7-301 Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologiesPublic Comment
BS EN 61800-7-302 Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologiesPublic Comment
BS EN 61800-7-303 Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologiesPublic Comment
BS EN 61800-7-304 Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologiesPublic Comment
BS EN 61803:1999+A1:2010+ A2 Determination of power losses in high-voltage direct current (HVDC) converter stationsAccepted
BS EN 61883-6 Ed 2.0 /A1 Amendment 1 to IEC 61183-6: Consumer audio/video equipment - Digital interface Part 6: Audio and music data transmission protocol (TA4)Publication
BS EN 61892-5 Ed 3.0 Mobile and fixed offshore units - Electrical installations Part 5: Mobile unitsApproval
BS EN 61892-7 Ed 3.0 Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areasApproval
BS EN 61935-1 Ed.4 TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH ISO/IEC 11801 Part 1: Installed cablingPublic Comment
BS EN 61935-2-21 Ed.1 Generic cabling systems — Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-21: Cord and work area cord category 6- Blank detail specificationPublic Comment
BS EN 61935-2-22 Ed.1 Generic cabling systems — Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-22: Cord and work area cord category 6A- Blank detail specificationPublic Comment
BS EN 61935-2-23 Ed.1 Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-23: Cord and work area cord category 7- Blank detail specificationPublic Comment
BS EN 61935-2-24 Ed.1 Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-24: Cord and work area cord category 7A- Blank detail specificationPublic Comment
BS EN 61935-2-25 Ed1.0 Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-25: Work area with M12 4 poles connectors Blank detail specificationPublic Comment
BS EN 61975:2010+A1 High-voltage direct current (HVDC) installations - System testsAccepted
BS EN 61982-4 Ed1.0 the propulsion of electric road vehicles Safety requirements of nickel-metal hydride cells and modulesAccepted
BS EN 61995-1:2008+A1 Devices for the connection of luminaires for household and similar purposes Part 1: General requirementsAccepted
BS EN 61995-2:2009+A1 Devices for the connection of luminaires for household and similar purposes Part 2: Standard sheets for DCLPublic Comment
BS EN 62040-1 Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPSPublic Comment
BS EN 62040-2 Ed3.0 Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility requirements (EMC)Accepted
BS EN 62040-5-3 Ed1.0 Uninterruptible power systems (UPS) - Part 5-3: Method of specifying the performance and test requirements for d.c. UPSAccepted
BS EN 62041 Safety of transformers, reactors, power supply units and combinations thereof - EMC requirementsPublic Comment
BS EN 62080:2009+A2 Sound signalling devices for household and similar purposesPublic Comment
BS EN 62087 METHODS OF MEASUREMENT FOR THE POWER CONSUMPTION OF AUDIO, VIDEO ANDRELATED EQUIPMENTPublication
BS EN 62087-1 Methods of measurement for the power consumption of audio; video and related equipment Part 1: General (TA12)Public Comment
BS EN 62087-2 Methods of measurement for the power consumption of audio; video and related equipment Part 2: Media (TA12)Public Comment
BS EN 62087-3 Methods of measurement for the power consumption of audio; video and related equipment- Part 3: Television Sets (TA12)Public Comment
BS EN 62087-4 Methods of measurement for the power consumption of audio; video and related equipment Part 4: Video Recording Equipment (TA12)Public Comment
BS EN 62087-5 Methods of measurement for the power consumption of audio; video and related equipment Part 5: Set top boxes (TA12)Public Comment
BS EN 62087-6 Methods of measurement for the power consumption of audio; video and related equipment Part 6: Audio Equipment (TA12)Public Comment
BS EN 62104 Ed 3.0 Characteristics of DAB receivers (TA 1)Public Comment
BS EN 62106 Ed 3.0 Specification of the Radio Data System (RDS) for VHF/FM sound broadcasting in the frequency range from 87;5 to 108;0 MHz (TA 1)Public Comment
BS EN 62133-1 Ed1.0 alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications Part 1: Nickel systemsAccepted
BS EN 62133-2 Ed1.0 alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications Part 2: Lithium systemsAccepted
BS EN 62135-1 Resistance welding equipment Part 1: Safety requirements for design, manufacture and installationPublic Comment
BS EN 62135-2 Ed 2.0 Resistance welding equipment Part 2: Electromagnetic compatibility (EMC) requirementsPublic Comment
BS EN 62153-4-10 Ed2 Metallic Communication Cable Test Methods Part 4-10: Electromagnetic compatability (EMC) - Shielded screening attenuation test method for measuring the screening effectiveness of feed-throughs and electromagnetic gaskets double coaxial methodPublic Comment
BS EN 62153-4-7 Ed.2 Metallic Communication Cable test methods Part 4-7: Electromagnetic compatibility (EMC) - Shielded screening attenuation test method for measuring the Transfer impedance Zt and the screening attenuation aS or the Coupling attenuation aC of RF-Connectors and assemblies up to and above 3 GHz; Tube in Tube methodPublic Comment
BS EN 62209-1 Human exposure to radio frequency fields from hand-held and body-mountedwireless communication devices human models, instrumentation, and procedures Part 1: Procedure to determine the specific absorption rate (sar)for devices used next to the ear (frequency range of 300 mhz to 6 ghz)Public Comment
BS EN 62216 Ed 2.0 Digital terrestrial television receivers for the DVB-T system (TA 1)Accepted
BS EN 62231-1 Composite station post insulators for substations with ac voltages greater than 1 000 V up to 245 kV – Part 1: Dimensional, mechanical and electrical characteristicsPublic Comment
BS EN 62232 Ed 2.0 Determination of RF field strength and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposureAccepted
BS EN 62304 Ed 1.0 /A1 Amendment 1 - Medical devices - Application of usability engineering to medical devicesPublic Comment
BS EN 62304 ED 2.0 Medical device software - Software life cycle processesAccepted
BS EN 62353 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipmentApproval
BS EN 62366-1 Medical devices - Application of usability engineering to medical devicesApproval
BS EN 62366-2 Medical devices Part 2: Guidance on the application of usability engineering to medical devicesIdea
BS EN 62379-3 Common Control Interface for networked digital audio and video products Part 3: Video (TA 4)Approval
BS EN 62379-5-1 Common control interface for networked digital audio and video products Part 5-1: Transmission over networks - GeneralPublication
BS EN 62379-7 Common Control Interface for networked digital audio and video products Part 7: Measurements (TA 4)Public Comment
BS EN 62391-1 Fixed electric double-layer capacitors for use in electronic equipment - Part 1: Generic specificationApproval
BS EN 62424 Ed 2.0 control engineering - Request in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools.Public Comment
BS EN 62443-2-4 Security for industrial process measurement and control - Network and system security Part 2-4: Certification of IACS supplier security policies and practicesApproval
BS EN 62443-3-2 Industrial communication networks - Network and system security Part 3-2: Security assurance levels for zones and conduitsPublic Comment
BS EN 62477-1:2012+A1 Safety requirements for power electronic converter systems and equipment- Part 1: GeneralPublic Comment
BS EN 62477-1:2012+A1 Safety requirements for power electronic converter systems and equipment- Part 1: GeneralPublication
BS EN 62477-2 Safety requirements for power semiconductor converter systems - Safety requirements for power semiconductor converter systems - Part 2: Power Electronic Converters from 1000 V a.c. or 1500 V d.c. up to 35 kVIdea
BS EN 62485-1 Safety requirements for secondary batteries and battery installations Part 1: Stationary batteriesPublic Comment
BS EN 62489-1:2010 Amendment Electroacoustics - audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the pperformance of system componentsApproval
BS EN 62489-2 Ed2.0 induction loop systems for assisted hearing Part 2: Methods of calculating and measuring the low-frequency magnetic field emissions from the loop for assessing conformity with guidlines on limits for human exposurePublication
BS EN 62501:2009+A1 Voltage sourced converter (VSC) valves for high-voltage direct current direct current(HVDC) power transmission - Electrical testingPublication
BS EN 62609-1 Insulators for overhead lines - Composite line post insulators Part 1 - Definitions, End Fittings and Designationsnull
BS EN 62625-2 Electronic railway equipment - On-board driving data recording system Part 2: Conformance testingAccepted
BS EN 62634 Ed 2.0 Radio Data System (RDS) - Receiver products and characteristics - Methods of measurement (TA 1)Public Comment
BS EN 62660-3 ED 1.0 propulsion of electric road vehicles Part 3: Safety requirements of cells and modulesPublic Comment
BS EN 62680-1-1 Universal Serial Bus interfaces for data and power Part 1-1:Universal Serial Bus interfaces - common components - USB Battery Charging Specification; Revision 1.2 (TA 14)Public Comment
BS EN 62680-2-1 Universal Serial Bus interfaces for data and power Part 2-1: Universal Serial Bus Interfaces for data and power - Hi Speed USB 2.0 - Universal Serial Bus Specification; Revision 2.0 (TA 14)Public Comment
BS EN 62680-2-2 Universal Serial Bus interfaces for data and power Part 2-2: Universal Serial Bus interfaces for data and power - Hi-Speed 2.0 - Universal Serial Bus Micro-USB Cables and Connectors Specification; Revision 1.01 (TA14)Specification; Revision 1.01Public Comment
BS EN 62680-2-3 Universal Serial Bus interfaces for data and power Part 2-3: Universal Serial Bus interfaces for data and power - Hi Speed USB 2.0 - Universal Bus Cables and Connectors Class Document Revision 2.0Public Comment
BS EN 62682 ED 1.0 Management of alarms for the process industryPublication
BS EN 62702-2 Audio Archive System Part 2: Audio data preservation (TA6)Accepted
BS EN 62704-1 Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices; 30 MHz - 6 GHz- Part 1: General Requirements for using the Finite Difference Time Domain (FDTD) MethoAccepted
BS EN 62704-2 Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices: Specific Requirements for Finite Difference Time Domain (FDTD) Modelling of Exposure from Vehicle Mounted AntennasAccepted
BS EN 62704-3 Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices; 30 MHz - 6 GHz: Specific Requirements for using the Finite-Difference Time-Domain (FDTD) Method for SAR Calculations of MobileAccepted
BS EN 62708 Documents for electrical and instrumentation projects in the process industryApproval
BS EN 62718 Railway applications - Rolling stock - DC supplied electronic ballastsfor lighting fluorescent lampsApproval
BS EN 62747 Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systemsPublication
BS EN 62751-1 Determination of power losses in voltage sourced converters (VSC) for HVDC systems - Part 1: General requirementsPublication
BS EN 62751-2 Determination of power losses in voltage sourced converter (VSC) valves for HVDC systems - Part 2: Modular multilevel convertersPublic Comment
BS EN 62753 Digital Terrestrial Television Receivers for the DTMB systemPublic Comment
BS EN 62760 Audio reproduction method for normalized loudness level (TA11)Accepted
BS EN 62764-1 Procedures for the measurement of field levels generated by electronic and electrical equipment in the automotive environment with respect to human exposure Part 1 : Low frequency magnetic fieldAccepted
BS EN 62767 Air Interface Protocol for local multilingual broadcasting (TA 4)Public Comment
BS EN 62772 Composite hollow core station post insulators for substations with a.c. and d.c.voltages greater than 1 000 V - Definitions, test methods and acceptance criteriaAccepted
BS EN 62777 Quality evaluation method for the sound field of directional speaker array system (TA 11)Accepted
BS EN 62783-1Ed.1 TWINAX CABLES FOR DIGITAL COMMUNICATIONS - Part 1: GENERIC SPECIFICATIONPublic Comment
BS EN 62810 Ed.1 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rodsPublic Comment
BS EN 62812 Method of measurement of low resistanceAccepted
BS EN 62813 Electrical characteristics test methods of lithium ion capacitors for use in electric and electronic equipmentApproval
BS EN 62822-1 ED 1.0 Assessment of electric welding equipment related to restrictions of human exposure to electromagnetic fields (0 Hz – 300 GHz) - Part 1: Product family standardAccepted
BS EN 62822-2 Ed1.0 Assessment of electric welding equipment related to restrictions of human exposure to electromagnetic fields (0 Hz – 300 GHz) - Part 2: Basic Standard for Arc WeldingAccepted
BS EN 62823 Thyristor valves for thyristor controlled series capacitors (TCSC) - Electrical testingPublication
BS EN 62827-1 Wireless Power Transfer - Management Part 1: Common ComponentsAccepted
BS EN 62832 Industrial-process measurement; control and automation - Reference model for representation of production facilities (Digital Factory)Accepted
BS EN 62842 File allocation system with minimized reallocation for multimedia home server (TA8)Public Comment
BS EN 62846 Ed. 1.0 Railway applications - Current collection systems - Requirements for andvalidations of measurements of the dynamic interaction betweenpantograph and overhead contact lineAccepted
BS EN 62847 Ed. 1.0 Railway applications - Rolling stock - Electrical connectors;requirements and test methodsAccepted
BS EN 62848-1 Ed. 1.0 Railway applications - Fixed installations - D.C. surge arresters andvoltage limiting devices Part 1: Surge arrestersAccepted
BS EN 62869 Activities and considerations related to Wireless Power Transfer (WPT) for audio; video and multimedia systems and equipment (TC 100)Publication
BS EN 62875 Printing specification of a texture map for auditory presentation of printed textsPublic Comment
BS EN 62877-1 Ed1.0 acid accumulators Part 1: Requirements for electrolytePublic Comment
BS EN 62877-2 Ed1.0 acid accumulators Part 2: Requirements for waterPublic Comment
BS EN 62881 Cause & Effect TableAccepted
BS EN 62888 Ed. 1.0 Railway applications - Energy measurement on board trainsnull
BS EN 62889 IEC 62889 Ed.1: Digital video interface - Gigabit video interface (GVIF) for multimedia systems (TA 4)Public Comment
BS EN 62907 Use cases related to Ambient Assisted Living (AAL) in the field of audio; video and multimedia systems and equipmentApproval
BS EN 62909-1 Bi-directional grid connected power converters - Part 1: General requirementsAccepted
BS EN 62927 Ed1.0 Voltage sourced converter (VSC) valves for static synchronouscompensator (STATCOM) - Electrical testingIdea
BS EN 62928 Ed. 1.0 Railway applications - Rolling stock equipment - Onboard lithium-iontraction batteriesIdea
BS EN 80005-1 Ed 2.0 Utility connections in port Part 1: High Voltage Shore Connection (HVSC) Systems - General requirementsAccepted
BS EN 80005-2 Utility connections in port Part 2: High voltage shore connection (HVSC) systems - Communication interface descriptionAccepted
BS EN 81-72 Safety rules for the construction and installation of lifts Particular applications for passenger and goods passenger lifts - Part 72: Firefighters liftsTechnical Review
BS EN 81-73 Safety rules for the construction and installation of lifts Particular applications for passenger lifts - Part 73: Behaviour of lifts in the event of firePublic Comment
BS EN 82304-1 ED 1.0 Healthcare software systems Part 1: General requirementsAccepted
BS EN 853 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - SpecificationTechnical Review
BS EN 854 Rubber hoses and hose assemblies - Textile reinforced hydraulic type - SpecificationTechnical Review
BS EN 856 Hose and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - SpecificationTechnical Review
BS EN 857 Hose and hose assemblies - Wire braid reinforced compact type for hydraulic applications - SpecificationTechnical Review
BS EN 88-2 Safety and control devices for gas burners and gas burning appliances —Part 2: Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa and associated safety devicesAccepted
BS EN CISPR 24 ED.2/A1 Information technology equipment - Immunity characteristics - Limits andmethods of measurementPublic Comment
BS EN IEC 60940/A1 AMD 1 Guidance information on the application of capacitors, resistors, inductors and complete filter units for radio interference suppressionnull
BS EN ISO 3691-3 Industrial trucks - Safety requirements and verification Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loadsApproval
BS EN ISO 6806 Rubber hoses and hose assemblies for use in oil burners - SpecificationPublication
BS EN ISO 7199 Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators)Publication
BS EN PNW 9-1872 Ed. 1.0 Railway applications - Fixed installations - Stationary energy storagesystem for DC traction systemsIdea
BS EN PWI 9-12 Ed. 1.0 Lithium-Ion Traction Batteries for Railways Applicationsnull
BS EN WI 00058070 Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control functionIdea
BS EN WI 00058071 Safety and control devices for gas burners and gas burning appliances - Gas filters having a maximum working pressure up to and including 600 kPaIdea
BS EN WI 00150081 Powered industrial trucks - Visibilty - Test methods and verification Part 1: General requirementsIdea
BS EN WI 00150082 Powered industrial trucks - Visibilty - Test methods and verification Part 2: Sit-on counter balanced trucks up to and including 10 000 kg capacityIdea
BS EN WI 16796-1 Energy efficiency of Industrial trucks - Test methods Part 1 : GeneralAccepted
BS EN WI 16796-2 Energy efficiency of Industrial trucks - Test methods Part 2 : Operator controlled self-propelled trucks, towing tractors and burden-carrier trucksAccepted
BS EN WI 16796-3 Energy efficiency of Industrial trucks - Test methods Part 3 : Container handling lift trucksAccepted
BS ENISO 10447 Resistance welding - Peel and chisel testing of resistance spot and projection weldsApproval
BS ENISO 12417-1 Cardiovascular implants and extracorporeal systems - Vascular device-drug combination productsPublic Comment
BS ENISO 13564-2 Powered industrial trucks - Test methods for verification of visibility Part 2: Sit-on and stand-on operator trucks and variable reach trucks greater than 10000 kg capacityAccepted
BS ENISO 14272 Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection weldsPublic Comment
BS ENISO 14273 Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection weldsPublic Comment
BS ENISO 16230-1 Agricultural machinery and tractors — Safety of higher voltage electrical and electronic components and systems Part 1: General requirementsPublic Comment
BS ENISO 18278-1 Resistance welding - Weldability Part 1: Assessment of weldability for resistance spot, seam and projection welding of metallic materialsApproval
BS ENISO 18278-2 Resistance welding - Weldability Part 2: Evaluation procedures for weldability in spot weldingPublic Comment
BS ENISO 23277 Non-destructive testing of welds - Penetrant testing of welds - Acceptance levelsApproval
BS ENISO 25745-2 Energy performance of lifts, escalators and moving walks Part 2 : Energy calculation and classification for lifts (elevators)Approval
BS ENISO 25745-3 Energy performance of lifts, escalators and moving walks Part 3 : Energy calculation and classification for escalators and moving walks"Approval
BS ENISO 27508 Resistance spot welding — weld bonding of coated and uncoated sheet materialsIdea
BS ENISO 28017:2011/Amd 1 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification - Amendment 1Approval
BS ENISO 3691-2 Industrial trucks - Safety requirements and verification Part 2: Self-propelled variable-reach trucksPublic Comment
BS ENISO 5840-1 Cardiovascular implants - Cardiac valve prostheses Part 1: General requirementsPublic Comment
BS ENISO 5840-2 Cardiovascular implants - Cardiac valve prostheses Part 2: Surgically implanted valve substitutesPublic Comment
BS ENISO 6134 saturated steam - SpecificationAccepted
BS ENISO 669 Resistance welding - Resistance welding equipment - Mechanical and electrical requirementsPublic Comment
BS ENISO 6802 assemblies with wire reinforcements - Hydraulic impulse test with flexingAccepted
Opens a new windowBS ENISO 7198 Cardiovascular implants - Tubular vascular prosthesesPublic Comment
BS IEC 60050-726 Ed2.0 IEC 60050-726. International electrotechnical vocabulary. Transmissionlines and waveguidesPublic Comment
BS IEC 60050-821 ED 2.0 International Electrotechnical Vocabulary (IEV) Part 821: Signalling and security apparatus for railwaysAccepted
BS IEC 60092-506 Electrical installations in ships – Part 506: Special features – Ships carrying specific dangerous goods andmaterials hazardous only in bulkAccepted
BS IEC 60393-2 Potentiometers for use in electronic equipment. Part 2: Sectional specification: Lead-screw actuated and rotary preset potentiometersPublic Comment
BS IEC 60393-5 Potentiometers for use in electronic equipment. Part 5: Sectional specification - Single-turn rotary low-power wirewound and non-wirewound potentiometersPublic Comment
BS IEC 60393-6 Potentiometers for use in electronic equipment. Part 6: Sectional specification - Surface mount preset potentiometersPublic Comment
BS IEC 61892-1 Ed 3.0 Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditionsPublic Comment
BS IEC 62153-4-15 Ed.1 Metallic Communication Cable test methods Part 4-15: Electromagnetic compatibility (EMC) – Test method for measuring transfer impedance and screening attenuation – or coupling attenuation with Triaxial CellPublic Comment
BS IEC 62864-1 ED 1.0 stock - Power supply with onboard energystorage system Part 1: Series hybrid systemAccepted
Opens a new windowBS ISO 10261:2002/Amd 1 Earth-moving machinery - Product identification numbering system - Amendment 1Public Comment
BS ISO 10605:2008/AMD 1 Road vehicles - Test methods for electrical disturbances from electrostatic discharges - Amendment 1Publication
BS ISO 10656 Electric resistance welding - Integrated transformers for welding gunsAccepted
BS ISO 10865-2 Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers Part 2: Systems for forward-facing wheelchair-seated passengers Systems for forward facing wheelchair-seated passengersPublic Comment
BS ISO 10896-2 Rough-terrain trucks - Safety requirements and verification Part 2: Slewing trucksAccepted
BS ISO 10896-4 Rough-terrain trucks - Safety requirements and verification Part 4: Freely swinging loadsPublic Comment
Opens a new windowBS ISO 10896-5 Rough-terrain trucks - Safety requirements and verification Part 5: Interface between rough-terrrain truck and integrated personnel work platformPublic Comment
BS ISO 10906 Earth-moving machinery - Auditory warning devices - Laboratory test procedure and requirementsIdea
BS ISO 10924-1 Road vehicles - Circuit breakers - Part 1: Definitions and general test requirementsAccepted
BS ISO 10924-3 Road vehicles - Circuit breakers Part 3: Miniature circuit breakers.Public Comment
BS ISO 10924-4 Road vehicles - Circuit breakers - Part 4: Medium circuit breakers with tabs (Blade type), CB15Accepted
Opens a new windowBS ISO 10924-5 Road vehicles - Circuit breakers - Part 5: Circuit breakers with rated voltage of 450 V.Public Comment
BS ISO 11001-1 Agricultural wheeled tractors and implements - Three-point hitch couplers Part 1: U-frame couplerPublic Comment
BS ISO 11451-1 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminologyPublication
BS ISO 11451-2 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Off-vehicle radiation sourcesApproval
BS ISO 11451-3 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 3: On-board transmitter simulationApproval
BS ISO 11452-1 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminologyApproval
BS ISO 11452-3 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 3: Transverse electromagnetic mode (TEM) cellIdea
BS ISO 11452-8 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 8: Immunity to magnetic fieldsApproval
BS ISO 11525-2 Rough-terrain trucks - User requirements Part 2: Slewing variable-reach trucksPublic Comment
BS ISO 11525-4.2 Rough-terrain trucks - User requirements Part 4: Requirements for trucks operating with freely swinging loadsPublic Comment
BS ISO 11525-5 Rough-terrain trucks - User requirements Part 5: Interface between rough-terrain truck and integrated personnel work platformPublication
BS ISO 11759 Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) - SpecificationPublication
BS ISO 11783-1 Tractors and machinery for agriculture and forestry - Serial control and communications data network Part 1: General standard for mobile data communicationPublic Comment
BS ISO 11783-10 Tractors and machinery for agriculture and forestry - Serial control and communications data network Part 10: Task controller and management information system data interchangeApproval
BS ISO 11783-7 Tractors and machinery for agriculture and forestry - Serial control and communications data network Part 7: Implement messages application layerPublication
BS ISO 11898-1 Road vehicles - Controller area network (CAN) Part 1: Data link layer and physical signallingAccepted
BS ISO 12175 Space data and information transfer systems - Standard formatted data units - Structure and construction rulesAccepted
BS ISO 13031 Earth-moving machinery - Quick couplers - SafetyApproval
BS ISO 13209-2 Road vehicles — Open Test sequence eXchange format (OTX) Part 2: Core data model specification and requirementsPublication
BS ISO 13363 Rubber and plastics hoses for marine-engine wet-exhaust systems - SpecificationPublic Comment
BS ISO 13400-4 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) Part 4: Ethernet Diagnostic ConnectorAccepted
BS ISO 13526 Space data and information transfer systems - Tracking data messageAccepted
BS ISO 13775-1 Thermoplastic tubing and hoses for automotive use Part 1: Non-fuel applicationsPublic Comment
BS ISO 13775-2 Thermoplastic tubing and hoses for automotive use Part 2: Petroleum-based-fuel applicationsAccepted
BS ISO 14229-7 Road vehicles - Unified diagnostic services (UDS) - Part 7: UDS on local interconnect network (UDSonLIN)Public Comment
BS ISO 14269-2:1997/Amd 1 Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment Part 2: Heating, ventilation and air-conditioning test method and performance - Amendment 1Accepted
BS ISO 14982 Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteriaAccepted
BS ISO 14990-1 Earth-moving machinery - Electrical safety of machines utilising electric drives and related components and systems Part 1: General RequirementsAccepted
BS ISO 14990-2 Earth-moving machinery - Electrical safety of machines ut ilising electric drives and related components and systems Part 2: Particular requirements for externally-powered machinesAccepted
BS ISO 14990-3 andrelatedcomponentsandsystems Earth-movingmachinery--Electricalsafetyofmachinesutili singelectricdrives Part 3: Particular requirements for self-powered machinesAccepted
BS ISO 15031-3 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics Part 3: Diagnostic connector and related electrical circuits, specification and useAccepted
BS ISO 15031-5 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics Part 5: Emissions-related diagnostic servicesPublic Comment
BS ISO 15031-6 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics Part 6: Diagnostic trouble code definitionsPublic Comment
BS ISO 15118-3 Road vehicles - Vehicle to grid communication interface Part 3: Physical layer and data link layer requirementsApproval
BS ISO 15118-7 Road vehicles - Vehicle to grid communication interface Part 7: Network and application protocol requirements for wireless communicationIdea
BS ISO 15118-8 Road vehicles - Vehicle to grid communication interface Part 8: Physical layer and data link layer requirements for wireless communicationIdea
BS ISO 15765-2 Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) - Part 2: Transport protocol and network layer services.Accepted
BS ISO 15818 Earth-moving machinery - Lifting and tying-down attachment points - Performance requirementsPublic Comment
BS ISO 16001 Earth-moving machinery - Hazard detection systems and visual aids - Performance requirements and testsAccepted
BS ISO 16157 Human-Life Activity Support Systems and Equipment Integration in Space Flight - Techno-Medical Requirements for Space Vehicle Human Habitation EnvironmentsAccepted
BS ISO 16220 Magnesium and magnesium alloys - Magnesium alloy ingots and castingsAccepted
BS ISO 16237 Mechanical joining - Destructive testing of joints - Specimen dimensions and test procedure for cross-tension testing of single jointsPublic Comment
BS ISO 16301 Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for hydraulic jacks applications - SpecificationAccepted
BS ISO 16374 Evaluation method for cleanness of magnesium and magnesium alloy ingotsPublic Comment
BS ISO 16411 Tractors and machinery for agriculture and forestry - Slow moving vehicle identification emblem (SMV emblem)Accepted
BS ISO 16726 Human-Life Activity Support Systems and Equipment Integration in Space Flight - Techno-Medical Requirements for Space Vehicle Human Habitation Environments - Requirements for the air quality affected by harmful chemical contaminantsAccepted
BS ISO 16840-10 Wheelchair seating Part 10: Resistance to ignition of non-integrated seat and back cushions - Requirements and test methodsPublication
BS ISO 16840-12 Wheelchair Seating Part 12: Apparatus and Method for Cushion Envelopment TestingAccepted
BS ISO 16844-4 Road vehicles - Tachograph systems - Part 4: CAN interfaceApproval
BS ISO 16844-6 Road vehicles - Tachograph systems - Part 6: DiagnosticsApproval
BS ISO 16844-7 Road vehicles - Tachograph systems - Part 7: ParametersApproval
BS ISO 16845-1 Road vehicles - Controller area network (CAN) conformance test plan - Part 1:Data link layer and physical signalingAccepted
BS ISO 16845-2 Road vehicles - Controller area network (CAN) - Conformance test plan - Part 2: High-speed medium access unit with selective wake-up functionalityPublication
BS ISO 16919 Space data and information transfer systems - Requirements for bodies providing audit and certification of candidate trustworthy digital repositoriesPublication
BS ISO 17253 Earthmoving machines and RTT - Design requirements for circulation on the roadApproval
BS ISO 17546 Space systems - Lithium ion battery for space vehicles - Design and verification requirementsPublic Comment
BS ISO 17757 Earth-moving machinery - Autonomous machine safetyIdea
BS ISO 17987-1 Road vehicles - Local interconnect network (LIN) - Part 1: General information and use case definitionPublic Comment
BS ISO 17987-2 Road vehicles - Local interconnect network (LIN) - Part 2: Transport protocol and network layer servicesPublic Comment
BS ISO 17987-3 Road vehicles - Local interconnect network (LIN) - Part 3: Protocol specificationPublic Comment
BS ISO 17987-4 Road vehicles - Local interconnect network (LIN) - Part 4: Electrical Physical Layer (EPL) specification 12V/24VPublic Comment
BS ISO 17987-5 Road vehicles - Local interconnect network (LIN) - Part 5: Application Programmers Interface (API)Public Comment
BS ISO 17987-6 Road vehicles - Local interconnect network (LIN) - Part 6: Protocol conformance test specificationPublic Comment
BS ISO 17987-7 Road vehicles - Local interconnect network (LIN) - Part 7: Electrical Physical Layer (EPL) conformance test specificationPublic Comment
BS ISO 18223 Nickel alloys - Determination of Nickel content - Inductively coupled plasma atomic emission spectrometric methodAccepted
BS ISO 1823.2 Rubber hose assemblies for oil suction and discharge service - SpecificationPublic Comment
BS ISO 18238 Space systems - Closed loop problem solving managementAccepted
BS ISO 18241 Cardiovascular implants and extracorporeal systems - Cardiopulmonary bypass systems - Venous bubble trapsAccepted
BS ISO 18242 Cardiovascular implants and extracorporeal systems - Centrifugal blood pumpsAccepted
BS ISO 18257 Space systems - Semiconductor integrated circuits for space applications - Design requirementsAccepted
BS ISO 18322-1 Space systems - Accreditation of space test centers and laboratories Part 1: ProcessIdea
BS ISO 18322-2 accreditation of space test centers and laboratoriesAccepted
Opens a new windowBS ISO 18423 Space data and information transfer systems - Pseudo-Noise (PN) Ranging SystemsPublic Comment
Opens a new windowBS ISO 18479-1 Rough-terrain trucks - Non-integrated personnel work platforms Part 1: Design requirementsPublic Comment
BS ISO 18479-2.2 personnel work platforms Part 2: User requirementsPublic Comment
BS ISO 18497 Safety of highly automated agricultural machinesAccepted
BS ISO 18650-2 Building construction machinery and equipment - Concrete mixers Part 2: Procedure for examination of mixing efficiencyApproval
BS ISO 18677 Method of analyzing oxygen for evaluating magnesium and magnesium alloysAccepted
BS ISO 18762 Tubes of titanium and titanium alloys - Welded tubes for condensers and heat exchangers - Technical deliverly conditionsAccepted
BS ISO 19013-2 Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification Part 2: Gasoline fuelsPublic Comment
BS ISO 19059 Magnesium and magnesium alloys - Determination of berylliumAccepted
BS ISO 19060 Magnesium and magnesium alloys - Determination of tinAccepted
BS ISO 19453-1-1 and testing for electrical and electronic equipment for drive system of electric propulsion vehicles Part 1: GeneralIdea
BS ISO 19453-2 Road vehicles - Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles Part 2: Mechanical loadsIdea
BS ISO 19453-3 Road vehicles - Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles Part 3: Climatic loadsIdea
BS ISO 19453-4 Road vehicles - Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles Part 4: Chemical loadsIdea
BS ISO 19683 Space systems - Design qualification and acceptance tests of small-scale satellite and units seeking low-cost and fast-deliveryIdea
BS ISO 19711-1 Building construction machinery and equipment - Truck mixers Part 1: Terminology and commercial specificationsIdea
BS ISO 19718 Rubber and plastics hoses and hose assemblies, wire- or textile- reinforced, for hydraulic power units used in hydraulic tool applications - SpecificationAccepted
BS ISO 19720-1 Building construction machinery and equipment - Machinery and plants for the preparation of concrete and mortar Part 1: Terminology and Commercial specificationsIdea
BS ISO 19826 Space systems - Programme management --Management of product characteristicsIdea
BS ISO 19923 Space environment (natural and artificial) - Spacecraft potential estimation in worst case environmentIdea
BS ISO 19924 Space systems - Acoustic testingIdea
BS ISO 19971 Space systems - Spacecraft and launch vehicle Combined Operation Plan (COP) at launch site - General formatIdea
Opens a new windowBS ISO 20104 Space data and information transfer systems - Producer-Archive Interface Specification (PAIS)Public Comment
Opens a new windowBS ISO 20105 Space data and information transfer systems - Operation of CFDP over encapsulation servicePublic Comment
Opens a new windowBS ISO 20106 Space data and information transfer systems - Mission operations common object modelPublic Comment
Opens a new windowBS ISO 20107 Space data and information transfer systems - Spacecraft onboard interface services - Device virtualization servicePublic Comment
BS ISO 20205 Space data and information transfer systems - Spacecraft Onboard Interface Systems - Low Data-Rate Wireless Communications for Spacecraft Monitoring and ControlPublic Comment
BS ISO 20206 Space data and information transfer systems - IP over CCSDS space linksPublic Comment
BS ISO 20207 Space data and information transfer systems - CCSDS Space Link Protocols over ETSI DVB-S2 StandardPublic Comment
BS ISO 20208 Space data and information transfer systems - Delta-DOR Raw Data Exchange FormatPublic Comment
BS ISO 20210 Space data and information transfer systems - Mission Operations Message Abstraction Layer - JAVA APIPublic Comment
BS ISO 20211 Space data and information transfer systems - Spacecraft Onboard Interface Services - Device Access ServicePublic Comment
BS ISO 20213 Space data and information transfer systems - Spacecraft onboard interface services - Message transfer servicePublic Comment
BS ISO 20214 Space data and information transfer systems - Security architecture for space data systemsPublic Comment
BS ISO 20215 Space data and information transfer systems - CCSDS cryptographic algorithmsPublic Comment
BS ISO 20216 Space data and information transfer systems - Spacecraft onboard interface services - Device data pooling servicePublic Comment
BS ISO 20217 Space data and information transfer systems - Spacecraft onboard interface services - File and packet store servicesPublic Comment
BS ISO 20474-1 Earth-moving machinery - Safety Part 1: General requirementsAccepted
BS ISO 20474-10 Earth-moving machinery - Safety Part 10: Requirements for trenchersAccepted
BS ISO 20474-11 Earth-moving machinery - Safety Part 11: Requirements for earth and landfill compactorsAccepted
BS ISO 20474-12 Earth-moving machinery - Safety Part 12: Requirements for cable excavatorsAccepted
BS ISO 20474-13 Earth-moving machinery - Safety Part 13: Requirements for rollersAccepted
BS ISO 20474-2 Earth-moving machinery - Safety Part 2: Requirements for tractor-dozersAccepted
BS ISO 20474-3 Earth-moving machinery - Safety Part 3: Requirements for loadersAccepted
BS ISO 20474-4 Earth-moving machinery - Safety Part 4: Requirements for backhoe-loadersAccepted
BS ISO 20474-5 Earth-moving machinery - Safety Part 5: Requirements for hydraulic excavatorsAccepted
BS ISO 20474-6 Earth-moving machinery - Safety Part 6: Requirements for dumpersAccepted
BS ISO 20474-7 Earth-moving machinery - Safety Part 7: Requirements for scrapersAccepted
BS ISO 20474-8 Earth-moving machinery - Safety Part 8: Requirements for gradersAccepted
BS ISO 20474-9 Earth-moving machinery - Safety Part 9: Requirements for pipelayersAccepted
BS ISO 21459 Space data and information transfer systems - Proximity-1 space link protocol - Coding and synchronization sublayerPublic Comment
Opens a new windowBS ISO 21460 Space data and information transfer systems - Proximity-1 space link protocol - Physical layerPublic Comment
BS ISO 22646 Space data and information transfer systems - Space packet protocolAccepted
Opens a new windowBS ISO 22663 Space data and information transfer systems - Proximity-1 space link protocol - Data link layerPublic Comment
BS ISO 22666 Space data and information transfer systems - AOS (advanced orbiting systems) space data link protocolAccepted
BS ISO 22829 Resistance welding - Transformer-rectifier for welding guns with integrated transformers - Transformer-rectifier units operating at 1000 Hz frequencyAccepted
Opens a new windowBS ISO 22900-2 Road vehicles - Modular vehicle communication interface (MVCI) Part 2: Diagnostic protocol data unit application programming interface (D-PDU API)Public Comment
BS ISO 22901-3 Road vehicles - Open diagnostic data exchange (ODX) - Part 3: Fault symptom exchange description (FXD)Accepted
BS ISO 22915-1 Industrial trucks - Verification of stability Part 1: GeneralPublic Comment
BS ISO 22915-12 Industrial trucks - Verification of stability Part 12: Industrial variable-reach trucks handling freight containers of 6m (20ft) length and longerApproval
BS ISO 22915-22 Industrial Trucks - Verification of stability - Part 22: Lateral and front stacking trucks with elevating operator positionApproval
BS ISO 22915-24 Industrial trucks - Verification of stability Part 24: Slewing variable-reach trucksPublic Comment
BS ISO 22915-9 Industrial trucks — Verification of stability — Part 9: Counterbalanced trucks with mast handling freight containers of 6m (20ft) length and longerPublication
BS ISO 23205 Agricultural tractors - Instructional seatPublic Comment
BS ISO 23551-2 Safety and control devices for gas burners and gas-burning appliances Particular requirements - Part 2: Pressure regulatorsAccepted
BS ISO 23551-8 Safety and control devices for gas burners and gas burning appliances Particular Requirements - Part 8: Multifunctional controlsAccepted
Opens a new windowBS ISO 23551-9 Safety and Control Devices for Gas Burners and Gas Burning appliances Particular Requirements - Part 9: Mechanical gas thermostatsPublic Comment
BS ISO 27145-6 Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements Part 6: External test equipmentPublic Comment
BS ISO 3600 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Operator's manuals - Content and presentationPublic Comment
BS ISO 3767-1 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays Part 1: Common symbolsAccepted
BS ISO 3767-2 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays Part 2: Symbols for agricultural tractors and machineryAccepted
BS ISO 5006 Earth-moving machinery - Operator's field of view - Test method and performance criteriaIdea
BS ISO 5053-1 Powered industrial trucks - Terminology Part 1: Types of industrial truckApproval
BS ISO 5131 Acoustics - Tractors and machinery for agriculture and forestry - Measurement of noise at the operator's position - Survey methodPublic Comment
BS ISO 5182 Resistance welding - Materials for electrodes and ancillary equipmentAccepted
BS ISO 5772 Rubber hoses and hose assemblies for measured fuel dispensing - SpecificationPublic Comment
BS ISO 5910 Cardiovascular implants and extracoporeal systems - Cardiac valve repair devicesAccepted
BS ISO 6501 Ferronickel - Specification and delivery requirementsAccepted
BS ISO 7176-1 Wheelchairs Part 1: Determination of static stabilityPublication
BS ISO 7176-19:2008/AMD 1 Wheelchairs Part 19: Wheeled mobility devices for use as seats in motor vehicles - Amendment 1: .Publication
BS ISO 7176-8 Wheelchairs Part 8: Requirements and test methods for static, impact and fatigue strengthsPublic Comment
Opens a new windowBS ISO 7216 Acoustics - Agricultural and forestry wheeled tractors and self-propelled machines - Measurement of noise emitted when in motionPublic Comment
BS ISO 7524 Nickel, ferronickel and nickel alloys - Determination of carbon content - Infra-red absorption method after induction furnace combustionIdea
BS ISO 7526 Nickel, ferronickel and nickel alloys - Determination of sulfur content - Infra-red absorption method after induction furnace combustionIdea
BS ISO 7530-1 Nickel alloys - Flame atomic absorption spectrometric analysis Part 1: Determination of cobalt, chromium, copper, iron and manganesePublic Comment
BS ISO 7637-1 Road vehicles - Electrical disturbances from conduction and coupling - Part 1:Definitions and general considerationsAccepted
BS ISO 7637-3 Road vehicles - Electrical disturbance by conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply linesPublic Comment
BS ISO 789-1 Agricultural tractors - Test procedures Part 1: Power tests for power take-offAccepted
BS ISO 789-13 Agricultural tractors - Test procedures Part 13: Terms and definitionsAccepted
BS ISO 789-2 Agricultural tractors - Test procedures Part 2: Rear three-point linkage lifting capacityAccepted
Opens a new windowBS ISO 789-3 Agricultural tractors - Test procedures Part 3: Turning and clearance diametersPublic Comment
BS ISO 789-9 Agricultural tractors - Test procedures Part 9: Power tests for drawbarAccepted
BS ISO 8049 Ferronickel shot - Sampling for analysisAccepted
BS ISO 8643 Earth-moving machinery - Hydraulic excavator and backhoe loader boom-lowering control device - Requirements and testsPublic Comment
BS ISO 8812 Earth-moving machinery - Backhoe loaders - Definitions and commercial specificationsApproval
BS ISO 8820-1 Road vehicles - Fuse-links - Part 1: Definitions and general test requirementsApproval
BS ISO 8820-10 Road vehicles - Fuse-links Part 10: Fuse-links with tabs Type L (high current miniature)Public Comment
BS ISO 8820-3 Road vehicles - Fuse links - Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)Public Comment
BS ISO 8820-5 Road vehicles - Fuse-links Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixturesPublic Comment
Opens a new windowBS ISO 9244:2008/Amd 1 Earth-moving machinery - Machine safety labels - General principles - Amendment 1Public Comment
BS ISO TS 11708 Non metallic material qualification for use in earth moving machinery - Operator protective structuresAccepted
BS ISO/IEC 15118-4 Road vehicles - Vehicle to grid communication interface - Part 4: Network and application protocol conformance test.Accepted
BS ISO/IEC 15118-5 Road vehicles - Vehicle to grid communication interface - Part 5: Physical and data link layer conformance tests.Accepted
BS ISO/IEC 15118-6 interface Part 6: General information and use-case definition for wireless communicationAccepted
BSEN 55035 Electromagnetic Comptibility (EMC) - Immunity standard for multimedia pr oductsApproval
PD CEN/TR 1459-6 - Rough-terrain trucks - Risk assessment methodology and control system performance level determinationIdea
PD CEN/TR 15367-1 Petroleum products - Guidelines for good housekeeping Part 1: Automotive diesel fuelsPublication
PD CEN/TR 16748 Aluminium and Aluminium alloys - Mechanical Potential of Al-Si alloys for High Pressure, Low Pressure and Gravity Die CastingPublication
PD CEN/TR 16749 Aluminium and aluminium alloys - Classification of Defects and Imperfections in High Pressure, Low Pressure and Gravity Die Cast ProductsPublication
PD CEN/TR 81-12 Safety rules for the construction and installation of lifts - Basics and interpretations Part 12: Use of EN 81-20 and EN 81-50 in specific marketsApproval
PD CISPR/TR 16-4-4/Am 1 Ed. 2.0 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio servicesAccepted
PD CISPR/TR 16-4-5:2006+A1 Specification for radio disturbance and immunity measuring apparatus andmethods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions forthe use of alternative test methodsPublication
PD CLC/TR 50083-2-1 Cable networks for television signals, sound signals and interactive services Part 2-1: Electromagnetic compatibility measurementsPublication
PD CLC/TR 50083-2-2 Cable networks for television signals, sound signals and interactiveservices - Part 2-2: Interference issues for DVB-T reception in the presence of LTE base station signalsApproval
PD CLC/TR 50542-1 Railway applications - Communication means between safety equipment and man-machine interfaces (MMI)Approval
PD CLC/TR 50584 Information technology -- CENELEC/ETSI Glossary of terms and definitions on broadband deploymentAccepted
PD CLC/TR 50610 Railway applications - Train Modes functional interface specificationApproval
PD CLC/TR 50627 Study Report on Electromagnetic Interference between Electrical Equipment/Systems in the Frequency Range Below 150 kHz Ed. 2Idea
PD CLC/TR 50XXX Railway applications - Specification for reversible direct current substationsIdea
PD CLC/TS 50083-3-3 Cable networks for television signals, sound signals and interactive services - Part 3-3: Active wideband equipment for cable networks – Methods of measurement of the maximum operating output level in the return pathAccepted
PD CLC/TS 62896 Hybrid insulators for a.c. and d.c. applications with voltage greater than 1 000 V-- Definitions, test methods and acceptancecriteriaAccepted
PD IEC TS 61245 Ed 2.0 insulators to be used on d.c systemPublic Comment
PD IEC/PAS 80005-3 Ed 1.0 Utility connections in port: Low Voltage Shore Connection (LVSC) Systems - General requirementsApproval
PD IEC/TR 60601-4-1 Ed.1 Medical electrical equipment Part 4-1: Guidance and interpretation - Medical electrical equipment and medical electrical systems employing a degree of autonomyIdea
PD IEC/TR 60601-4-3 Ed1.0 Medical electrical equipment Part 4-3: Guidance and interpretation – Considerations of unclear or unaddressed safety aspects in the third edition of IEC 60601-1 and proposals for new requirementsApproval
PD IEC/TR 60919-2 :2008+A1 Performance of high-voltage direct current (HVDC) systems withline- commutated converters - Part 2: Faults and switchingPublication
PD IEC/TR 60919-3 ED2.0/A1 Performance of high-voltage direct current (HVDC) systems withline-commutated converters - Part 3: Dynamic conditionsAccepted
PD IEC/TR 61000-1-7 Ed 1.0 Electromagnetic compatibility (EMC) Part 1-7: General - Power factor in single phase systems under non-sinusoidal conditionsAccepted
PD IEC/TR 61000-4-38 Electromagnetic Compatibility (EMC) - Testing and measurement techniques- Calibration and Verification Protocol for Flicker Compliance test systems Part 1: General requirements and methods of testAccepted
PD IEC/TR 61156-1-2:2009+A1 symmetrical pair/quad cables for digital communications Part 1-2: Electrical transmissoin characteristics and test methods of symmetrical pair/quad cablesApproval
PD IEC/TR 61156-1-6 Ed1.0 pair/quad cables for digital communications Part 1-6: Exploratory DC-resistance values of floor-wiring and work-area cables for digital communicationsAccepted
PD IEC/TR 61916 Electrical accessories - Harmonization of general rulesPublication
PD IEC/TR 62001-1 Ed1.0 High-voltage direct current (HVDC) systems - Guidebook to the specification and design evaluation of A.C. filters - Part 1: OverviewAccepted
PD IEC/TR 62001-4 Ed1.0 High-voltage direct current (HVDC) systems - Guidebook to the specification and design evaluation of A.C. filters - Part 4: EquipmentAccepted
PD IEC/TR 62153-4-16 Ed1.0 METALLIC COMMUNICATION CABLE TEST METHODS Part 4-16: Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-upApproval
PD IEC/TR 62443-2-3 Ed 1.0 Industrial communication networks - Network and system security Part 2-3: Patch management in the IACS environmentPublication
PD IEC/TR 62544 Ed 1.0/A1 High-voltage direct current (HVDC) systems - Application of activefiltersAccepted
PD IEC/TR 62757 Fire prevention measures on converters for high-voltage direct current (HVDC) systems, static var compensators (SVC) and flexible AC transmission systems (FACTS) and their valve hallsPublication
PD IEC/TR 62921 Ed 1.0 Quantification Methodology For Greenhouse Gas Emissions For Computers And MonitorsApproval
PD IEC/TR 80001-2-5 Application of risk management for IT-networks incorporating medical devices Part 2-5: Application guidance - Guidance on distributed alarm systemsPublication
PD IEC/TR 80001-2-7 Application of risk management for IT-networks incorporating medical - Application guidance Part 2-7: Guidance for Healthcare Delivery Organizations (HDOs) on how to self-assess their conformance with IEC 80001-1Publication
PD IEC/TR 80001-2-8 Ed 1.0 Application of risk management for IT-networks incorporating medical devices Part 2-8: Application guidance - Guidance on standards for establishing the security capabilities identified in IEC 80001-2-2Accepted
PD IEC/TR 80002-2 Medical device software Part 1: Validation of software for regulated processesIdea
PD IEC/TS 60815-4 ED 1.0 Selection and dimensioning of high-voltage insulators intended for usein polluted conditions - Part 4: Insulators for d.c. systemsIdea
PD IEC/TS 61400-26-2 Ed 1.0 Wind turbines Part 26-2: Production based availability for wind turbinesApproval
PD IEC/TS 61400-3-2 Ed 1.0 Wind turbines Part 3-2: Design requirements for floating offshore wind turbinesAccepted
PD IEC/TS 61463 Ed2.0 Bushings-Seismic QualificationAccepted
PD IEC/TS 62040-4-1 Ed 1.0 Uninterruptible power systems (UPS) - Part 4-1: Environmental aspects - Product category rules (PCR) for life cycle assessmentAccepted
PD IEC/TS 62073 Guidance on the measurement of hydrophobicity of insulator surfaces Part 2: Faults and switchingAccepted
PD IEC/TS 62153-4-1 Metallic communication cable test methods Part 4-1: Introduction to Electromagnetic (EMC) Test MethodsPublication
PD IEC/TS 62443-1-3 Industrial communication networks - Network and system security Part 1-3: System security compliance metricsPublic Comment
PD IEC/TS 62578 Power electronics systems and equipment - Operation conditions and characteristics of active infeed converter (AIC) applications including design recommendations for their emission values below 150 kHz.Publication
PD IEC/TS 62735 D.C. plugs and socket-outlets for ICT equipment installed in data centres and telecom central officesAccepted
PD IEC/TS 62871-1 Ed 1.0 Professional video strage products - Tape less camera recorder using MXF file format - Encoding guidelines Part 1: MXF Operational Pattern (TA6)Approval
PD IEC/TS 62872 Ed 1.0 Industrial process measurement; control and automation - System interface between Industrial Facilities and the Smart Grid.Accepted
PD ISO/IEC/TR 11801-9901 cabling for customer premises Part 8: Guidance for balanced cabling in support of at least 40 Gbit/s data transmissionAccepted
PD ISO/IEC/TR 11801-9903 Information technology - Generic cabling for customer premises Part 9903: Modelling of channels and links for balanced cablingAccepted
PD ISO/PAS 19451 Application of ISO 26262:2011-2012 to SemiconductorsIdea
PD ISO/TR 14799-1 Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparisonApproval
PD ISO/TR 14799-2 Comparison of worldwide escalator and moving walk safety standards Part 2: Abbreviated comparison and commentsApproval
PD ISO/TR 16840-9 Wheelchair seating Part 9: Clinical interface pressure mapping guidelines for seatingAccepted
PD ISO/TR 18146 Space systems - Design and operation manual for spacecraft operated in the debris environmentAccepted
PD ISO/TR 19473 Space systems - Best practices for orbit elements at payload - LV separationAccepted
PD ISO/TR 19948 Conformity Assessment and Certification Process for Earth-moving MachineryIdea
PD ISO/TR 80001-2-6 Application of risk management to IT-networks incorporating medical devices Part 2-6 Guidance for responsibility agreementsPublication
PD ISO/TS 21609 Road vehicles — (EMC) guidelines for installation of aftermarket radio frequency transmitting equipmentPublication

[ back to top ]

Published standards (140)

Sort by: Reference | Title | Status

Standard referenceNameStatus
BS 4727-1:Group 09:1991Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics - Electromagnetic compatibilityWithdrawn
BS 5049-3:1994Radio interference characteristics of overhead power lines and high-voltage equipment - Code of practice for minimizing the generation of radio noiseWithdrawn
BS 5406-1:1988Disturbances in supply systems caused by household appliances and similar electrical equipment - Glossary of termsWithdrawn
BS 6299:1982Methods of measurement of the suppression characteristics of passive radio interference filters and suppression componentsWithdrawn
BS 6345:1983Method for measurement of radio interference terminal voltage of lighting equipmentWithdrawn
BS 6667-1:1985Electromagnetic compatibility for industrial-process measurement and control equipment - General introductionWithdrawn
BS 6667-3:1985Electromagnetic compatibility for industrial-process measurement and control equipment - Method of evaluating susceptibility to radiated electromagnetic energyWithdrawn
BS 727:1983Specification for radio-interference measuring apparatusWithdrawn
BS CISPR 16-3:2000Specification for radio disturbance and immunity measuring apparatus and methods - Reports and recommendations of CISPRWithdrawn
BS EN 12895:2000Industrial trucks. Electromagnetic compabilityCurrent, Work in Hand
BS EN 133000:1997Harmonized system of quality assessment for electronic components. Generic specification: passive filter units for electromagnetic interference suppressionWithdrawn
BS EN 133100:1998Harmonized system of quality assessment for electronic components. Sectional specification:passive filter units for electromagnetic interference suppression. Filters for which safety tests are not requiredWithdrawn
BS EN 133101:1998Harmonized system of quality assessment for electronic components. Blank detail specification:passive filter units for electromagnetic interference suppression. Filters for which safety tests are not requiredWithdrawn
BS EN 133201:1998Harmonized system of quality assessment for electronic components. Blank detail specification: passive filter units for electromagnetic interference suppression. Filters for which safety tests are requiredWithdrawn
BS EN 133221:1998Harmonized system of quality assessment for electronic components. Blank detail specification: passive filter units for electromagnetic interference suppression. Filters for which safety tests are required (safety tests only)Withdrawn
BS EN 138000:1997Harmonized system of quality assessment for electronic components. Generic specification: fixed inductors for electromagnetic interference suppression (inductors for which safety tests are required)Withdrawn
BS EN 138100:1997Harmonized system of quality assessment for electronic components. Sectional specification: fixed inductors for electromagnetic interference suppression (inductors for which safety tests are required)Withdrawn
BS EN 14010:2003+A1:2009Safety of machinery. Equipment for power driven parking of motor vehicles. Safety and EMC requirements for design, manufacturing, erection and commissioning stagesCurrent
BS EN 50065-1:1992Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz - General requirements, frequency bands and electromagnetic disturbancesWithdrawn
BS EN 50065-1:2001+A1:2010Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - General requirements, frequency bands and electromagnetic disturbancesWithdrawn
BS EN 50065-1:2011Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - General requirements, frequency bands and electromagnetic disturbancesCurrent
BS EN 50065-2-3:2003Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 Khz - Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributorsCurrent
BS EN 50083-2:2001Cabled distribution systems for television and sound signals - Electromagnetic compatibility for equipmentWithdrawn
BS EN 50083-2:2006Cable networks for television signals, sound signals and interactive services - Electromagnetic compatibility for equipmentWithdrawn
BS EN 50083-2:2012Cable networks for television signals, sound signals and interactive services - Electromagnetic compatibility for equipment Current
BS EN 50083-8:2002+A11:2008Cable networks for television signals, sound signals and interactive services - Electromagnetic compatibility for networksWithdrawn
BS EN 50083-8:2013Cable networks for television signals, sound signals and interactive services - Electromagnetic compatibility for networksCurrent
BS EN 50091-2:1996Specification for uninterruptible power systems (UPS) - EMC requirementsWithdrawn
BS EN 50121-1:2006Railway applications. Electromagnetic compatibility - GeneralCurrent, Work in Hand
BS EN 50121-2:2006Railway applications. Electromagnetic compatibility - Emissions of the whole railway system to the outside worldCurrent, Work in Hand
BS EN 50121-3-1:2000Railway applications. Electromagnetic compatibility. - Rolling stock. Train and complete vehicleWithdrawn
BS EN 50121-3-1:2006Railway applications. Electromagnetic compatibility - Rolling stock. Train and complete vehicleCurrent, Work in Hand
BS EN 50121-3-2:2000Railway applications. Electromagnetic compatibility - Rolling stock. ApparatusWithdrawn
BS EN 50121-3-2:2006Railway applications. Electromagnetic compatibility - Rolling stock. ApparatusCurrent, Work in Hand
BS EN 50121-4:2000Railway applications. Electromagnetic compatibility - Emission and immunity of the signalling and telecommunications apparatusWithdrawn
BS EN 50121-4:2006Railway applications. Electromagnetic compatibility - Emission and immunity of the signalling and telecommunications apparatusCurrent, Work in Hand
BS EN 50121-5:2000Railway applications. Electromagnetic compatibility - Emission and immunity of fixed power supply installations and apparatusWithdrawn
BS EN 50121-5:2006Railway applications. Electromagnetic compatibility - Emission and immunity of fixed power supply installations and apparatusCurrent, Work in Hand
BS EN 50147-1:1997Anechoic chambers - Shield attenuation measurementCurrent
BS EN 50147-2:1997Anechoic chambers - Alternative test site suitability with respect to site attenuationWithdrawn
BS EN 50199:1996Electromagnetic compatibility (EMC). Product standard for arc welding equipmentWithdrawn
BS EN 50240:2004Electromagnetic compatibilty (EMC). Product standard for resistance welding equipmentWithdrawn
BS EN 50263:2000Electromagnetic compatibility (EMC). Product standard for measuring relays and protection equipmentWithdrawn
BS EN 50293:2001Electromagnetic compatibility. Road traffic signal systems. Product standardWithdrawn
BS EN 50293:2012Road traffic signal systems. Electromagnetic compatibilityCurrent
BS EN 50310:2006Application of equipotential bonding and earthing in buildings with information technology equipmentWithdrawn
BS EN 50310:2010Application of equipotential bonding and earthing in buildings with information technology equipmentCurrent
BS EN 50357:2001Evaluation of human exposure to electromagnetic fields from devices used in electronic article surveillance (EAS), radio frequency identification (RFID) and similar applicationsWithdrawn
BS EN 50360:2001+A1:2012Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz - 3 GHz)Current
BS EN 50364:2002Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 10 GHz, used in electronic article surveillance (EAS), radio frequency identification (RFID) and similar applicationsWithdrawn
BS EN 50364:2010Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in electronic article surveillance (EAS), radio frequency identification (RFID) and similar applicationsCurrent
BS EN 50413:2008+A1:2013Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz - 300 GHz)Current
BS EN 50443:2011Effects of electromagnetic interference on pipelines caused by high voltage a.c. electric traction systems and/or high voltage a.c. power supply systemsCurrent
BS EN 50498:2010Electromagnetic compatibility (EMC). Product family standard for aftermarket electronic equipment in vehiclesCurrent
BS EN 55017:2011Methods of measurement of the suppression characteristics of passive EMC filtering devicesCurrent
BS EN 60437:1998Radio interference test on high-voltage insulatorsCurrent
BS EN 60601-1-2:1993Medical electrical equipment. General requirements for safety - Collateral standard. Electromagnetic compatibility. Requirements and testsWithdrawn
BS EN 60601-1-2:2002Medical electrical equipment. General requirements for safety - Collateral standard. Electromagnetic compatibility. Requirements and testsWithdrawn
BS EN 60938-1:2000Fixed inductors for electromagnetic interference suppression - Generic specificationCurrent
BS EN 60938-2-1:2000Fixed inductors for electromagnetic interference suppression - Blank detail specification. Inductors for which safety tests are required. Assessment level D - Blank detail specification: Fixed inductors for electromagnetic interference suppression for which electrical shock hazard protection tests are required. Assessment level DCurrent
BS EN 60938-2:2000Fixed inductors for electromagnetic interference suppression - Sectional specificationCurrent
BS EN 61000-2-10:1999Electromagnetic compatibility (EMC). Environment - Description of HEMP environment. Conducted disturbanceCurrent
BS EN 61000-2-12:2003Electromagnetic compatibility (EMC). Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systemsCurrent
BS EN 61000-2-4:1995Electromagnetic compatibility (EMC). Environment - Compatibility levels in industrial plants for low-frequency conducted disturbancesWithdrawn
BS EN 61000-2-4:2002Electromagnetic compatibility (EMC). Environment - Compatibility levels in industrial plants for low-frequency conducted disturbancesCurrent
BS EN 61000-2-9:1996Electromagnetic compatibility (EMC). Environment - Description of HEMP environment. Radiated disturbance. Basic EMC publicationCurrent
BS EN 61000-4-1:2007Electromagnetic compatibility (EMC) - Testing and measurement techniques. Overview of IEC 61000-4 seriesCurrent
BS EN 61000-4-15:1998Electromagnetic compatibility (EMC). Testing and measurement techniques - Flickermeter. Functional and design specifications. Basic EMC publicationWithdrawn
BS EN 61000-4-24:1997Electromagnetic compatibility (EMC). Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance. Basic EMC publicationCurrent, Work in Hand
BS EN 61000-4-25:2002+A1:2012Electromagnetic compatibility (EMC) - Testing and measurement techniques. HEMP immunity test methods for equipment and systemsCurrent
BS EN 61000-4-30:2003Electromagnetic compatibility (EMC). Testing and measurement techniques - Power quality measurement methodsWithdrawn
BS EN 61000-4-7:1993Electromagnetic compatibility (EMC) - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected theretoWithdrawn
BS EN 61000-5-5:1996Electromagnetic compatibility (EMC). Installation and mitigation guidelines - Specification of protective devices for HEMP conducted disturbance. Basic EMC publicationCurrent
BS EN 61204-3:2001Low voltage power supplies, d.c. output - Electromagnetic compatibility (EMC)Current, Work in Hand
BS EN 61326-1:2006Electrical equipment for measurement, control and laboratory use. EMC requirements - General requirementsCurrent
BS EN 61326-1:2013Electrical equipment for measurement, control and laboratory use. EMC requirements - General requirementsCurrent
BS EN 61326-2-1:2006Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements. Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applicationsCurrent
BS EN 61326-2-1:2013Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements. Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applicationsCurrent
BS EN 61326-2-2:2006Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements. Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systemsCurrent
BS EN 61326-2-2:2013Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements. Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systemsCurrent
BS EN 61326-2-3:2006Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning Current
BS EN 61326-2-3:2013Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements. Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioningCurrent
BS EN 61326-2-4:2006Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices, according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9Current
BS EN 61326-2-4:2013Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements. Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9Current
BS EN 61326-2-5:2006Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2Current
BS EN 61326-2-5:2013Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements. Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1Current
BS EN 61326-2-6:2006Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements. In vitro diagnostic (IVD) medical equipmentCurrent
BS EN 61326-2-6:2013Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements. In vitro diagnostic (IVD) medical equipmentCurrent
BS EN 61326:1998Electrical equipment for measurement, control and laboratory use. EMC requirementsWithdrawn
BS EN 61800-3:1997Adjustable speed electrical power drive systems - EMC product standard including specific test methodsWithdrawn
BS EN 61800-3:2004+A1:2012Adjustable speed electrical power drive systems - EMC requirements and specific test methods Current, Work in Hand
BS EN 619:2002+A1:2010Continuous handling equipment and systems. Safety and EMC requirements for equipment for mechanical handling of unit loadsCurrent
BS EN 61920:1998Infrared transmission systems. Free air applicationsWithdrawn
BS EN 62040-2:2006Uninterruptible power systems (UPS) - Electromagnetic compatibility (EMC) requirementsCurrent, Work in Hand
BS EN 62041:2003Power transformers, power supply units, reactors and similar products. EMC requirementsWithdrawn
BS EN 62041:2010Safety of transformers, reactors, power supply units and combinations thereof. EMC requirementsCurrent, Work in Hand
BS EN 62135-2:2008Resistance welding equipment - Electromagnetic compatibility (EMC) requirementsCurrent, Work in Hand
BS EN 62153-1-1:2004Metallic communication cables test methods - Electrical. Measurement of the pulse/step return loss in the frequency domain using the inverse discrete fourier transformation (IDFT)Current
BS EN 62153-4-2:2004Metallic communication cable test methods - Electromagnetic compatibility. Screening and coupling attenuation. Injection clamp methodCurrent
BS EN 62153-4-7:2006Metallic communication cables test methods - Electromagnetic compatibility (EMC). Test method for measuring the transfer impedance and the screening, or the coupling attenuation. Tube in tube methodCurrent, Work in Hand
BS EN 62310-2:2007Static transfer systems (STS) - Electromagnetic compatibility (EMC) requirementsCurrent
BS EN 62369-1:2009Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz - Fields produced by devices used for electronic article surveillance, radio frequency identification and similar systemsCurrent
BS EN ISO 14982:1998Agricultural and forestry machinery. Electromagnetic compatibility. Test methods and acceptance criteriaWithdrawn
BS EN ISO 14982:2009Agricultural and forestry machinery. Electromagnetic compatibility. Test methods and acceptance criteriaCurrent
BS G 257-1:1998Design of electromagnetic hazard protection of civil aircraft - Guide to theory and threatsCurrent
BS G 257-2:1998Design of electromagnetic hazard protection of civil aircraft - Guide to protectionCurrent
BS G 257-3:2004Design of electromagnetic hazard protection of civil aircraft - Guide to clearance and testingCurrent
BS IEC 1000-2-5:1995Electromagnetic compatibility (EMC). Environment - Classification of electromagnetic environments. Basic EMC publicationCurrent
BS IEC 60050(121):1998International electrotechnical vocabulary - ElectromagnetismCurrent
BS IEC 60533:1999Electrical and electronic installations in ships. Electromagnetic compatibilityCurrent, Work in Hand
BS IEC 61000-2-7:1998Electromagnetic compatibility (EMC). Environment - Low frequency magnetic fields in various environmentsCurrent
BS IEC 61000-5-1:1996Electromagnetic compatibility (EMC). Installation and mitigation guidelines - General considerations. Basic EMC publicationCurrent
BS IEC 61000-5-2:1997Electromagnetic compatibility (EMC). Installation and mitigation guidelines - Earthing and cablingCurrent
BS ISO 14117:2012Active implantable medical devices. Electromagnetic compatibility. EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devicesCurrent
BS ISO 14302:2002Aerospace series. Space systems. Electromagnetic compatibility requirementsCurrent
BS ISO 7176-21:2003Wheelchairs - Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scootersWithdrawn
BS ISO 7176-21:2009Wheelchairs - Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargersCurrent
DD ENV 50121-1:1996Railway applications. Electromagnetic compatibility - GeneralWithdrawn
DD ENV 50121-3-1:1996Railway applications. Electromagnetic compatibility - Rolling stock. Train and complete vehicleWithdrawn
DD ENV 50121-3-2:1996Railway applications. Electromagnetic compatibility - Rolling stock. ApparatusWithdrawn
DD ENV 50121-5:1996Railway applications. Electromagnetic compatibility - Fixed power supply installationsWithdrawn
DD ENV 50185-2:1996Infra-red free air application - ApplicationsWithdrawn
DD ENV 50185-3:1996Infra-red free air application - Measuring conditionsWithdrawn
DD IEC TS 61000-1-2:2001Electromagnetic compatibility (EMC). General - Methodology for the achievement of the functional safety of electrical and electronic equipment with regard to electromagnetic phenomenaWithdrawn
PD 1001:1996A guide to electromagnetic compatibility and structured cablingWithdrawn
PD 6582:1993Electromagnetic compatibility (EMC). Guide to generic EMC standardsCurrent
PD 6591:1996Guidelines on how to use anechoic enclosures that do not fulfil the requirements regarding normalized site attenuation for pre-compliance tests of productsCurrent
PD CISPR/TR 18-1:2010Radio interference characteristics of overhead power lines and high- voltage equipment - Description of phenomenaCurrent
PD CISPR/TR 18-2:2010Radio interference characteristics of overhead power lines and high-voltage equipment - Methods of measurement and procedure for determining limitsCurrent
PD CISPR/TR 18-3:2010Radio interference characteristics of overhead power lines and high-voltage equipment - Code of practice for minimizing the generation of radio noiseCurrent
PD CLC/TR 50450:2006Resistibility requirements for equipment having (a) telecommunication port(s)Current
PD CLC/TR 50538:2010Guide to EMC Directive conformity of equipment designed for military purposesCurrent
PD CR R106-001:2002Guidelines for product committees on the preparation of standards related to human exposure from electromagnetic fieldsWithdrawn
PD IEC TR 61000-5-6:2002Electromagnetic compatibility (EMC). Installation and mitigation guidelines - Mitigation of external EM influencesCurrent
PD IEC/TR 60725:2012Consideration of reference impedances and public supply network impedances for use in determining disturbance characteristics of electrical equipment having a rated current = 75 A per phaseCurrent
PD IEC/TR 61000-1-6:2012Electromagnetic compatibility (EMC) - General. Guide to the assessment of measurement uncertaintyCurrent
PD IEC/TR 61000-2-14:2006Electromagnetic compatibility (EMC) - Environment. Overvoltages on public electricity distribution networksCurrent
PD IEC/TR 62153-4-1:2010Metallic communication cable test methods - Electromagnetic compatibility (EMC). Introduction to electromagnetic (EMC) screening measurementsCurrent, Work in Hand
PD ISO/TR 16764:2003Lifts, escalators and passenger conveyors. Comparison of worldwide standards on electromagnetic interference/electromagnetic compatibilityCurrent
PD R210-008:2002Guide to EMC conformity of apparatus designed for military and other purposesWithdrawn

[ back to top ]

Committees (49)

Sort by: Reference | Name

Committee ReferenceTitle
ACE/66Aerospace electromagnetic compatibility
AGE/6Agricultural tractors and forestry machinery
EPL/100/3Audio systems and equipment
EPL/100Audio, video and multimedia systems and equipment
EPL/100/4Cable distribution equipment and systems
EPL/46Cables, wires and waveguides, radio frequency connectors and accessories for communication and signalling
EPL/40XCapacitors and resistors for electronic equipment
CH/150/2Cardiovascular implants
CH/62/1Common aspects of Electrical Equipment used in Medical Practice
MHE/9Continuous mechanical handling equipment
B/513/1Earth moving machinery (International)
WEE/6Electric arc welding equipment
PEL/23Electrical accessories
AUE/16Electrical and electronic equipment
JPEL/18Electrical installations of ships and of mobile and fixed offshore units
EPL/29Electroacoustics
GEL/1Electrotechnical Terminology
GEL/210EMC - Policy committee
GEL/210/12EMC basic, generic and low frequency phenomena Standardization
GEL/210/11EMC product standards
GEL/106Human exposure to low frequency and high frequency electromagnetic radiation
MHE/7Industrial trucks
PEL/36Insulators for power systems
MHE/12Lifting Platforms
MHE/4Lifts, hoists and escalators
NFE/35Light metals and their alloys
PTI/2Liquid Fuels
PEL/205Mains signalling
GEL/65Measurement and control
PEL/95Measuring relays and protection systems
I/-Miscellaneous standards materials and chemicals
PEL/22Power electronics
GEL/9Railway Electrotechnical Applications
GEL/9/3Railway Electrotechnical Applications - Fixed Equipment
GEL/9/2Railway Electrotechnical Applications - Rolling stock
WEE/29Resistance welding
EPL/526Road traffic control signals
PRI/66Rubber and plastics tubing, hoses and hose assemblies
GSE/22Safety and control devices for gas and oil burners and gas burning appliances
CPL/61Safety of household and similar electrical appliances
PEL/21Secondary cells and batteries
PEL/96Small transformers
ACE/68Space systems and operations
GEL/65/1System considerations
TCT/7Telecommunications - Installation requirements
TCT/-Telecommunications Sector Assembly
EH/3Water quality
CH/173/1Wheelchairs
PEL/88Wind turbines

[ back to top ]

Recently Viewed
Need Help?

We are here to help you with any queries. Email us for help.

But first, why not view the Help Pages?