Skip to content
RSS feed for this category

General

Standards in development (805)

Sort by: Title | Status

Standard TitleStatus
BS 1363-1 13 A plugs, socket outlets, adaptors and connection units Part 1: Specification for rewirable and non-rewirable 13 A fused plugsAccepted
BS 1363-2 13 A plugs, socket outlets, adaptors and connection units Part 2: Specification for 13 A switched and unswitched socket-outletsIdea
BS 1363-3 13 A plugs, socket-outlets, adaptors and connection units Part 3: Specification for adaptorsIdea
BS 1363-4 13 A plugs, socket-outlets, adaptors and connection units Part 3: Specification for 13 A fused connection units switched and unswitchedIdea
BS 1363-5 13 A plugs, socket-outlets, adaptors and connection units Part 3: Specification for 13 A fused connection units switched and unswitchedIdea
BS 55032 Ed.2 Amd 1 ED.2 A1 F3 Electromagnetic compatibility of multimedia equipment - Emission requirementsPublic Comment
BS 8546 Multiple or simple travel adaptors with compatibility with UK plug andsocket system - SpecificationPublic Comment
BS 8551 Provision and management of temporary water supplies and distribution networks (not including provisions for statutory emergencies) – Code of practiceApproval
BS EN 00150052 Industrial trucks - Safety requirements and verification - Regional requirements for countries within the European Community (ISO/TS 3691-7:2010: modified)Accepted
BS EN 115-1 Safety of escalators and moving walks Part 1: Construction and installationAccepted
BS EN 12020-2 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 Part 2: Tolerances on dimensions and formAccepted
BS EN 12067-2 Gas/air ratio controls for gas burners and for gas burning appliances Part 2: Electronic typesAccepted
BS EN 12352 Traffic control equipment - Warning and safety light devicesPublic Comment
BS EN 12392 Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipmentTechnical Review
BS EN 125:2010 +A1 Flame supervision devices for gas burning appliances - Thermo-electric flame supervision devicesApproval
BS EN 126:2012 +A1 burning appliances/Amendment 1Public Comment
BS EN 12675 Traffic signal controllers - Functional safety requirementsPublic Comment
BS EN 12895 Industrial trucks - Electromagnetic compatibilityPublication
BS EN 14420-8:2013/A1 Hose fittings with clamp units Part 8: Symmetrical half coupling (Guillemin system)/Amendment 1Accepted
BS EN 14459 Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessmentApproval
BS EN 1459-1 and verification Part 1: Variable-reach trucksPublic Comment
BS EN 1459-2 Rough-terrain trucks - Safety requirements and verification Part 2: Slewing variable-reach trucksPublication
BS EN 15694:2009/A1 Agricultural and forestry tractors - Passenger seat - Requirements and test proceduresApproval
BS EN 15695-1 Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances Part 1: Cab classification, requirements and test proceduresAccepted
BS EN 15695-2 Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances Part 2: Filters, requirements and test proceduresAccepted
BS EN 1570-2 Safety requirements for lifting tables Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/sPublic Comment
BS EN 15940 Automotive fuels - Paraffinic diesel from synthesis or hydrotreatment - Requirements and test methodsPublic Comment
BS EN 16230-2 Leisure karts Part 2: Safety requirements for tracksPublic Comment
BS EN 16602-60 Space product assurance - Electrical, electronic and electromechanical (EEE) componentsPublication
BS EN 16602-60-13 Space product assurance - Requirements for the use of COTS componentsPublication
BS EN 16602-70-55 Space product assurance - Microbiological examination of flight hardware and cleanroomsPublication
BS EN 16602-70-56 Space product assurance - Vapour phase bioburden reduction for flight hardwarePublication
BS EN 16602-70-57 Space product assurance - Dry heat bioburden reduction for flight hardwarePublication
BS EN 16602-70-58 Space product assurance - Bioburden control of cleanroomsPublication
BS EN 16603-20-01 Space engineering - Multipaction, design and testPublication
BS EN 16603-31-02 Space engineering - Two-phase heat transport equipmentPublication
BS EN 16603-60-30 Space engineering - Satellite AOCS requirementsPublication
BS EN 16643 assemblies - Unbonded fluoroplastic lined (e. g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - SpecificationPublic Comment
BS EN 16678 Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6300 kPaApproval
BS EN 16709 Automotive fuels - High FAME diesel blends (B10 - B30)- Requirements and test methodsPublication
BS EN 16719 Transport PlatformsPublic Comment
BS EN 16734 Automotive fuels - Diesel containing 10%(V/V) of fatty acid methyl esters (FAME) - Requirements and test methodsPublic Comment
BS EN 16773 Aluminium and aluminium alloys - Guideline for the production thin foil in the field of containers for foodstuffs fabricationTechnical Review
BS EN 16803-1 Space - Use of geo-positioning services for navigation and localization applications Part 1: Minimum Operational Performances definition methodology for GNSS-based positioning terminals used in road transport applicationsPublic Comment
BS EN 16830 burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control functionPublic Comment
BS EN 16831 Agricultural and forestry tractors and agricultural machinery - Safety - Format for reporting accidents with tractors and agricultural machineryPublic Comment
BS EN 16842-1 Powered industrial trucks - Visibilty - Test method for verification Part 1: General requirementsPublic Comment
BS EN 16842-2 Powered industrial trucks - Visibilty - Test methods and verification Part 2: Sit-on counter balanced trucks and rough terrain masted trucks up to and including 10 000 kg capacityPublic Comment
Opens a new windowBS EN 16898 Safety and control devices for gas burners and gas burning appliances - Gas filters having a maximum working pressure up to and including 600 kPaPublic Comment
BS EN 16906 Liquid petroleum products - Determination of the ignition quality of diesel fuels - BASF engine methodAccepted
BS EN 16914 Aluminium and aluminium alloys - Hot-rolled armour plates in weldable aluminium alloy - Technical delivery conditionsAccepted
BS EN 1755 Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dustPublication
BS EN 1762 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - SpecificationIdea
BS EN 1765 Rubber hose assemblies for oil suction and discharge services - Specification for the assembliesIdea
BS EN 280:2013/A1:2013 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and testsPublication
BS EN 50066 Miniature connecting devices in carsnull
BS EN 50083-2/A1 Cable networks for television signals, sound signals and interactiveservices - Part 2: Electromagnetic compatibility for equipmentApproval
BS EN 50117-4-2 Coaxial cables Part 4-2: Sectional specification for CATV cables up to 6 GHz used in cables distribution networksApproval
BS EN 50122-1:2011/prAB Railway applications - Fixed installations - Electrical safety, earthingand the return circuit Part 1: Protective provisions against electric shocknull
BS EN 50124-1 Railway applications - Insulation coordination Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipmentIdea
BS EN 50124-2 Railway applications - Insulation coordination Part 2: Overvoltages and related protectionIdea
BS EN 50152-3-1 Railway applications - Fixed installations - Particular requirements fora.c. switchgear Part 3-1: Measurement, control and protection devices for specific use in a.c. traction systems - Application guidenull
BS EN 50152-3-2 Railway applications - Fixed installations - Particular requirements fora.c. switchgear Part 3-2: Measurement, control and protection devices for specific use in a.c. traction systems - Single-phase current transformersPublic Comment
BS EN 50152-3-3 Railway applications - Fixed installations - Particular requirements fora.c. switchgear Part 3-3: Measurement, control and protection devices for specific use in a.c. traction systems - Single-phase inductive voltage transformersPublic Comment
BS EN 50155 Railway applications - Electronic equipment used on rolling stockAccepted
BS EN 50171 Central safety power supply systemsApproval
BS EN 50180-1 and from 250 A to 3,15 kA for liquid filled transformersPublic Comment
BS EN 50180-2 Bushings above 1 kV up to 52 kV and from 250A to 3,15 kA for liquid filled transformers Part 2: Requirement for bushing componentsnull
BS EN 50180-3 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers Part 3: Requirement for bushing fixationsnull
BS EN 50288-10-2 Multi-element metallic cables used in analogue and digital communication and control Part 10-2: Sectional specification for screened cables characterized from 1 MHz up to 500 MHz - Horizontal and building backbone cablesApproval
BS EN 50288-11-2 Multi-element metallic cables used in analogue and digital communication and control Sectional specification for un-screened cables, characterized from 1 MHz up to 500 MHz - Horizontal and building backbone cablesApproval
BS EN 50288-9-2 Multi-element metallic cables used in analogue and digital communication and control Part 9-2: Sectional specification for screened cables characterised from 1 MHz uo to 1000 MHz - Work area, patch cord and data centre cablesApproval
BS EN 50289-1-17 Communications cables – Specifications for test methods Part 1-17: Electrical test methods – Exogenous Crosstalk ExNEXT and ExFEXTAccepted
BS EN 50290-2-21:2001+A1:2007+Corr Common design rules and construction. PVC insulation compoundsnull
BS EN 50290-2-33 Communication cables Part 2-33: Common design rules and construction - Polyethylene for multi element metallic data cables for indoor applicationIdea
BS EN 50290-2-37 Communication cables Part 2-37: Common design rules and construction - Polyethylene insulation for coaxial cablesIdea
BS EN 50290-2-38 Communication cables Part 2-38: Common design rules and construction - Polypropylene insulation for coaxial cablesIdea
BS EN 50308 Wind turbines - Protective measures - Requirements for design, operation and maintenanceApproval
BS EN 50342-1 Lead-acid starter batteries Part 1: General requirements and methods of testAccepted
BS EN 50342-6 Lead-acid starter batteries Part 6: Batteries for Micro Cycle ApplicationsAccepted
BS EN 50343:2014/prA Railway applications - Rolling stock - Rules for installation of cablingnull
BS EN 50367:2012 prA1 Railway applications - Current collection systems - Technical criteriafor the interaction between pantograph and overhead line (to achievefree access) (Requirements on gauges and contact strips)Public Comment
BS EN 50388-2 Railway Applications - Power supply and rolling stock - Technicalcriteria for the coordination between power supply and rolling stock toachieve interoperability Part 2: stability and harmonicsAccepted
BS EN 50405 Railway applications - Current collection systems - Pantographs, testing methods for contact stripsPublic Comment
BS EN 50412-4 Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz Part 4: Low rate wide band services (LRWBS) operating between 2 MHz and 4 MHz - Channel allocationsApproval
BS EN 50436-3 Alcholic interlocks - Test methods and performance requirements - Part 3: Guidance for authorities, decision makers, purchasers and users.Public Comment
BS EN 50436-5 Alcohol interlocks - Test methods and performance requirements Part 5: Instruments without a mouthpiece and measuring breath alcohol for general preventive useIdea
BS EN 50449 Electromagnetic devices and components - General specificationApproval
BS EN 50463-1 Railway applications - Energy measurement on board trains Part 1: Generalnull
BS EN 50463-2 Railway applications - Energy measurement on board trains Part 2: Energy measuringnull
BS EN 50463-3 Railway applications - Energy measurement on board trains Part 3: Data handlingnull
BS EN 50463-4 Railway applications - Energy measurement on board trains Part 4: Communicationnull
BS EN 50463-5 Railway applications - Energy measurement on board trains Part 5: Conformity assessmentnull
BS EN 50498 Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehiclesIdea
BS EN 50502 Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and connection systemsPublication
BS EN 50526-3 Railway Applications - Fixed Installations - D.C. surge arresters and voltage limiting devices Part 3: Application guidePublic Comment
BS EN 50527-1 Procedure for the assessment of the exposure to electromagnetic fieldsof workers bearing active implantable medical devices - Part 1: GeneralPublic Comment
BS EN 50527-2-1 Procedure for the assessment of the exposure to electromagnetic fieldsof workers bearing active implantable medical devices - Part 2-1: Specific assessment for workers with cardiac pacemakersPublic Comment
BS EN 50556:2011/A Road traffic signal systemsIdea
BS EN 50561-2 Power line telecommunications modems - Radio disturbance characteristics - Limits and methods of measurement - Part 2: Modems for access networksPublic Comment
BS EN 50561-3 Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and methods of measurement Part 3: Apparatus operating above 30 MHzPublic Comment
BS EN 50562 Railway applications - Fixed installations - Process, measures anddemonstration of safety for electric traction systemsnull
BS EN 50592 Railway applications - Testing of rolling stock for electromagneticcompatibility with axle countersPublic Comment
BS EN 50604-1 Secondary lithium batteries for LEV (Light Electric Vehicle) applications - Part 1: General safety requirements and test methodsPublic Comment
BS EN 50633 Railway applications - Fixed installations - Protection principles for electric traction systemsPublic Comment
BS EN 50641 Railway applications - Fixed installations - Requirements for the valida tion of simulation tools used for the design of traction power supply sy stemsPublic Comment
BS EN 50849 Sound systems for emergency purposesPublication
BS EN 50849 Sound systems for emergency purposesPublic Comment
BS EN 50882-11 Multi-element metalic cables used in analogue and digital communication and control Part 11: Sectional specification for un-screened cables, characterised up to 500 MHz, for horizontal and building backbone wiringPublic Comment
BS EN 536 Road construction machines - Mixing plants for road construction materials - Safety requirementsPublication
BS EN 55011 Am1 f1 Ed.6.0 Industrial, scientific and medical equipment - Radio-frequencydisturbance characteristics - Limits and methods of measurementApproval
BS EN 55011 Ed6 Supplement of CISPR 11 with the APD method and associated limits forasse ssment of fluctuating RF disturbances in the range above 1 GHzPublication
BS EN 55012 Ed. 7.0 Vehicles, boats and internal combustion engines - Radio disturbancecharacteristics - Limits and methods of measurement for the protectionof off-board receiversAccepted
BS EN 55013:2013/A1 Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurementPublication
BS EN 55014-1 Ed 6 - Requirements for household appliances, electric tools and similar apparatus - Part 1: EmissionPublic Comment
BS EN 55015 Ed 9.0 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipmentPublic Comment
BS EN 55016-1-1 Requirements for calibration of measuring equipmentApproval
BS EN 55016-1-3/A1 disturbance and immunity measuring apparatus andmethods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance powerApproval
BS EN 55016-1-4 Ed 3.0 /A2 Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurementsAccepted
BS EN 55016-1-5/A1 disturbance and immunity measuring apparatusandmethods – Part 1-5: Radio disturbance and immunity measuring apparatus – Antenna calibration sites and reference test sites for 5 MHz to 18 GHzPublic Comment
BS EN 55016-1-6 Ed 1.0 /A1 Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibrationPublic Comment
BS EN 55016-2-3 Am3 Ed 3.0 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiateddisturbance measurementsPublic Comment
BS EN 55020:2007+A1 Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurementPublication
BS EN 55025 ED.4.0 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers. Annex on ALSE Performance Verification 150 kHz - 1 GHzPublic Comment
BS EN 55035 CISPR 35: Electromagnetic compatibility of multimedia equipment - Immunity RequirementsPublic Comment
BS EN 590/Amd1 Automotive fuels - Diesel - Requirements and test methodsApproval
BS EN 60062 Ed 6.0 Marking codes for resistors and capacitorsPublic Comment
BS EN 60077-1 Ed. 2.0 Railway applications - Electric equipment for rolling stock Part 1: General service conditions and general rulesAccepted
BS EN 60077-2 Ed. 2.0 Electric equipment for rolling stock Part 2: Electrotechnical components - General rulesAccepted
BS EN 60092-100-1 Electrical installations in ships Part 100-1: General - System design; general requirements and testsAccepted
BS EN 60092-100-2 Electrical installations in ships Part 100-2: General - Power supply and distribution; additional requirementsAccepted
BS EN 60092-100-3 Electrical installations in ships Part 100-3: General - Control and AutomationAccepted
BS EN 60092-100-4 Electrical installations in ships Part 100-4: General - Equipment; additional requirementsAccepted
BS EN 60092-101 Ed 5.0 Electrical installations in ships Part 101: Definitions and generalAccepted
BS EN 60092-201 Ed 5.0 Electrical installations in ships Part 201: System design - GeneralAccepted
BS EN 60092-201 Electrical installations in ships - Part 201: System design - General, clause 14: Shore connectionsAccepted
BS EN 60092-502 ED 6.0 IEC 60092-502: Electrical installations in ships - Part 502: Tankers - Special featuresAccepted
BS EN 60092-504 Ed 4.0 Electrical installations in ships - Part 504: Automation, control and instrumentationPublic Comment
BS EN 60092-507 Electrical installations in ships Part 507: Small vesselsApproval
BS EN 60096-0-1 Ed.3 Amd 1 Radio frequency cables Part 0-1: Guide to the design of detail specifications - Coaxial cables, Amendment 1null
BS EN 60115-22014+A1 Fixed resistors for use in electronic equipment Part 2: Sectional specification: Leaded fixed low power film resistorsnull
BS EN 60115-8-1:2014+A1 Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level Gnull
BS EN 60118-0 ED.3 Electroacoustics- Hearing aids- Part 0: measurement of the performance characteristics of hearing aids (Amalgamated revision of IEC 60118-0, IEC 60118-1, IEC 60118-2, IEC 60118-6)Publication
BS EN 60118-13 ED.4 Electroacoustics - Hearing aids Part 13: Electromagnetic compatability (EMC) (Revision of IEC 60118-13: 2011)Public Comment
BS EN 60137 Ed. 7.0 Insulated bushings for alternating voltages above 1000 VAccepted
BS EN 60153-1 HOLLOW METALLIC WAVEGUIDES Part 1: General requirements and measuring methodsPublic Comment
BS EN 60153-2 Ed 3.0 HOLLOW METALLIC WAVEGUIDES Part 2: Relevant specifications for ordinary rectangular waveguidesPublic Comment
BS EN 60154-1 Ed 3.0 FLANGES FOR WAVEGUIDES Part 1: General requirementsPublication
BS EN 60154-2 Ed 3.0 FLANGES FOR WAVEGUIDES Part 2: Relevant specifications for flanges for ordinary rectangular waveguidesPublication
BS EN 60195 Method of measurement of current noise generated in fixed resistorsPublic Comment
BS EN 60255-118-1 Measuring relays and protection equipment - Part 195: Functional requirements for synchrophasor measurementsAccepted
BS EN 60255-24 Measuring relays and protection equipment - Part 24 : Common format for transient data exchange (COMTRADE) for powersystemsPublication
BS EN 60305 Insulators for overhead lines with a nominal voltage above 1000 V ceramic or glass insulator units for a a.c. systems - Characteristics of insulator units of the cap and pin typeAccepted
BS EN 60310 ED 4.0 Railway applications - Traction transformers and inductors on board rolling stockPublic Comment
BS EN 60317-0-10 Specifications for particular types of winding wires Part 0-10: General requirements - Polyester Glass fibre wound, resin or varnish impregnated, bare or enamelled round copper wireAccepted
BS EN 60317-0-11 Specifications for particular types of winding wires Part 0-11: General requirements - Basic, supplementary, or reinforced insulated single or multi-layer tape wrapped or extruded round winding wiresAccepted
BS EN 60317-0-4 Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wireApproval
BS EN 60317-0-9 Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wirePublication
BS EN 60317-1 Specifications for particular types of winding wires – Part 1: Polyvinyl acetal enamelled round copper wire, class 105Idea
BS EN 60317-31 Specifications for particular types of winding wires - Part 31: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180Public Comment
BS EN 60317-32 Specifications for particular types of winding wires - Part 32: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155Public Comment
BS EN 60317-33 Specifications for particular types of winding wires - Part 33: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200Public Comment
BS EN 60317-35:2012 Specifications for particular types of winding wires Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layerApproval
BS EN 60317-39 Specifications for particular types of winding wires - Part 39: Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180Publication
BS EN 60317-59 Specifications for particular types of winding wires - Part 59: Polyamide-imide enameled round copper wire, class 240Publication
BS EN 60317-63 Specifications for particular types of winding wires Part 63: Basic, supplementary, or reinforced insulated single or or multi-layer tape extruded round winding wireAccepted
BS EN 60317-64 Specifications for particular types of winding wires Part 64: Basic, supplementary, or reinforced insulated single or multi- layer tape wrapped round winding wireAccepted
BS EN 60317-65 Specifications for particular types of winding wires Part 65: Basic, supplementary, or reinforced insulated single or multi- layer extruded round winding wire with a bonding layerAccepted
BS EN 60317-66 Specifications for particular types of winding wires Part 66: Basic, supplementary, or reinforced insulated single or multi- layer tape wrapped round winding wire with a bonding layerAccepted
BS EN 60317-68 Specifications for particular types of winding wires Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120Accepted
BS EN 60317-69 Specifications for particular types of winding wires - Part 69: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 220Accepted
BS EN 60317-70 Specifications for particular types of winding wires Part 70: Polyester glass-fibre wound unvarnished and fused or resin/varnish impregnated, bare of enamelled round copper wire temperature index 155Accepted
BS EN 60317-71 Specifications for particular types of winding wires Part 71: Polyester glass-fibre wound unvarnished and fused or resin/varnish impregnated, bare of enamelled round copper wire temperature index 180Accepted
BS EN 60317-72 Specifications for particular types of winding wires Part 72: Polyester glass-fibre wound unvarnished and fused or resin/varnish impregnated, bare of enamelled round copper wire temperature index 200Accepted
BS EN 60318-7 Ed 2.0 Electroacoustics - Simulators of human head and ear Part 7: Head and torso simulator for the measurement of air-conduction hearing aidsAccepted
BS EN 60335-1 Ed 5.0 /A2 Household and similar electrical appliances - Safety Part 1: General requirementsPublic Comment
BS EN 60335-1:2012+A1 Household and similar electrical appliances - Safety - Part 1: General requirementsPublication
BS EN 60335-2-11 Ed 7.0 /A2 Household and similar electrical appliances - Safety Part 2-11: Particular requirements for tumble dryersApproval
BS EN 60335-2-24/A2 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makersApproval
BS EN 60335-2-24:2010+A1 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice- cream appliances and ice-makersApproval
BS EN 60335-2-34/A1 Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressorsApproval
BS EN 60335-2-58-A2 Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machinesApproval
BS EN 60335-2-58:2005+A12 Household and similar electrical appliances – Safety – Part 2-58: Particular requirements for commercial electric dishwashing machinesApproval
BS EN 60335-2-7 Ed 7.0 /A2 Household and similar electrical appliances - Safety Part 2-7: Particular requirements for washing machinesPublic Comment
BS EN 60335-2-89/A2 Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incoporated or remote refrigerant unit or compressorPublication
BS EN 60335-2-89:2010+A1 Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressorApproval
BS EN 60384-1 Fixed capacitors for use in electronic equipment - Part 1: Generic specificationPublic Comment
BS EN 60384-14 Ed 4.0 /A1 Fixed capacitors for use in electronic equipment Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mainsPublic Comment
BS EN 60384-14-1 Ed 3.0 Fixed capacitors for use in electronic equipment Part 14-1: Blank detail specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level DZPublic Comment
BS EN 60384-14-2 Ed 2.0 Fixed capacitors for use in electronic equipment Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Safety tests onlyPublic Comment
BS EN 60384-15 Fixed capacitors for use in electronic equipment. Part 15: Sectional specification: Fixed tantalum capacitors with non- solid or solid electrolytePublic Comment
BS EN 60384-18 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolytePublic Comment
BS EN 60384-19 Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene- terephthalate film dielectric surface mount d.c. capacitorsPublication
BS EN 60384-20 Fixed capacitors for use in electronic equipment Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitorsPublication
BS EN 60384-24 Fixed capacitors for use in electronic equipment Part 24: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolytePublication
BS EN 60384-25 Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolytePublication
BS EN 60384-3 Fixed capacitors for use in electronic equipment - Part 3: Sectional specification: Surface mount fixed tantalum electrolyt capacitors with manganese dioxide solid electrolytePublic Comment
BS EN 60384-4 Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolytePublic Comment
BS EN 60433 Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic insulators for a.c. systems - Characteristics of insulator units of the long rod typeAccepted
BS EN 60539-1 Directly heated negative temperature coefficient thermistors Part 1: Generic specificationPublic Comment
BS EN 60601-1-2 Medical electrical equipment Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic disturbances - Requirements and testsApproval
BS EN 60601-2-16 Ed 5.0 Medical electrical equipment Part 2-16: Particular requirements for basic safety and essential performance of haemodialysis; haemodiafiltration and haemofiltration equipmentAccepted
BS EN 60601-2-39 Ed 3.0 Medical electrical equipment Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipmentAccepted
BS EN 60601-2-66 Ed2.0 Medical electrical equipment Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systemsPublication
BS EN 60633:1999+A1:2009+A2 Terminology for high-voltage direct current (HVDC) transmissionPublic Comment
BS EN 60645-1 Ed. 4.0 Electroacoustics - Audiometric equipment Part 1: Equipment for pure-tone and speech audiometryPublic Comment
BS EN 60645-2 Audiometric equipment Part 2: Equipment for speech audiometryAccepted
BS EN 60669-1 ED 4.0 Switches for household and similar fixed-electrical installations Part 1: General requirementsPublic Comment
BS EN 60669-2-1:2004+A2:2015 Switches for household and similar fixed electrical installations Part 2-1: Particular requirements - Electronic switchesPublication
BS EN 60669-2-5 ED 1.0 Switches for household and similar fixed electrical installations - Part 2-5: Switches and related accessories for use in home and building electronic systems (HBES)Publication
BS EN 60700-1 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testingPublic Comment
BS EN 60700-2 Thyristor valves for high-voltage direct current (HVDC) power transmission - Part 2: TerminologyPublic Comment
BS EN 60728-11 Ed 4.0 Cable networks for television signals; sound signals and interactive services Part 11: SafetyApproval
BS EN 60728-3-2 Cable networks for television signals; sound signals and interactive services - IEC 60728; Part 3-X : Method of measurement of non-linearity for active equipment using five carriesAccepted
BS EN 60728-5 Ed 3.0 Cable networks for television signals; sound signals and interactive services Part 5: Headend equipmentApproval
BS EN 60851-2:2009+A1 Winding wires - Test methods Part 2: Determination of dimensionsPublication
BS EN 60851-4 Winding wires - Methods of test for winding wires - Part 4: Chemical propertiesAccepted
BS EN 60884-2-5 Ed 2.0 for household and similar purposes – Part 2-5: Particular requirements for adaptorsAccepted
BS EN 60939-3 Passive filter units for electromagnetic interference suppression Part 3: Standard for passive filter units for which safety tests are appropriatePublication
BS EN 60942 Electroacoustics - Sound calibrators (Revision of IEC 60942:2003)Accepted
BS EN 60958-3/A2:2015 Digital audio interface Part 3: Consumer applicationsPublication
BS EN 60958-4-1 Digital audio interface Part 4-1: Professional applications - Audio Content (TA 4)Public Comment
BS EN 60958-4-2 Digital audio interface Part 4-2: Professional applications - Metadata and subcode (TA 4)Public Comment
BS EN 60958-4-3 Digital audio interface Part 4-3: Professional applications Transport (TA 4)Accepted
BS EN 60958-4-4 Digital audio interface Part 4-4: Professional applications - Physical and electrical (TA 4)Public Comment
BS EN 60966-1 Ed.3 Cables, wires, waveguides, r.f. connectors, and accessories for communication and signallingPublic Comment
BS EN 60966-2-4 Ed 4 Detail specification for cable assebmblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz, IEC 61196-2 connectorsPublic Comment
BS EN 60966-2-5 Ed 4 Detail specification for cable assebmblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz, IEC 61196-2 connectorsPublic Comment
BS EN 60966-2-6 Ed 4 Detail specification for cable assebmblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz, IEC 61196-24 connectorsPublic Comment
BS EN 60966-2-7 ED.1 Radio frequency and coaxial cable assemblies Part 2-7: Detail specification for cable assemblies for radio and TV recievers - Frequency range 0 MHz to 3000 MHz, IEC 61169-47 connectorsPublication
BS EN 60974-1 Arc wedling equipment Part 1: Welding power sourceAccepted
BS EN 60974-10 Ed 3.0 /A1 Amendment 1 - Arc wedling equipment Part 10: Electromagnetic compatibility (EMC) requirementsPublication
BS EN 60974-4 Ed 3.0 Arc welding equipment Part 4: Periodic inspection and testingPublic Comment
BS EN 60974-6 Arc welding equipment Part 6: Limited duty equipmentApproval
BS EN 61000-1-2 Ed1.0 Electromagnetic Compatibility (EMC) - Part 1-2: General – Methodology for the achievement of functional safetyof electrical and electronic systems including equipment with regard to electromagnetic phenomenaPublic Comment
BS EN 61000-3-11 Ed 2.0 Electromagnetic compatibility (EMC) Part 3-11: Limits - Limitation of voltage changes; voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current 75 A and subject to conditional connectionPublic Comment
BS EN 61000-3-2 Ed 5.0 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ? 16 A per phase)Public Comment
BS EN 61000-3-3 Ed 3.0 /A1 Amendment 1 - Electromagnetic compatibility (EMC) Part 3-3: Limits - Limitation of voltage changes; voltage fluctuations and flicker in public low-voltage supply systems; for equipment with rated current ? 16 A per phase and not subject to conditional connectionPublic Comment
BS EN 61000-4-10 Electromagnetic Compatibility (EMC) – Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity testPublic Comment
BS EN 61000-4-11 AMD1 Ed.2.0 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity testsPublic Comment
BS EN 61000-4-13 A2 Electromagnetic compatibilty (EMC) – Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity testsPublic Comment
BS EN 61000-4-16 Electromagnetic compatibilty (EMC) – Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHzsPublic Comment
BS EN 61000-4-23 Ed 2.0 Electromagnetic Compatibility (EMC) - Part 4-23: Testing and measurement techniques - Test methods for protective devices for HEMP and other radiated disturbancesAccepted
BS EN 61000-4-24 ED 2.0 Electromagnetic Compatibility (EMC) - Part 4-24: Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbanceApproval
BS EN 61000-4-31 Electromagnetic compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity testPublic Comment
BS EN 61000-4-37 Electromagnetic compatibility (EMC) - Part 4-37: Testing and measurement techniques - Calibration and verification protocol for harmonic emission compliance test systemsPublic Comment
BS EN 61000-4-39 Ed. 1.0 Electromagnetic compatibilty (EMC) – Part 4-39: Testing and measurement techniques – Radiated fields in close proximity immunity testPublic Comment
BS EN 61000-4-9 Electromagnetic Compatibility (EMC) – Part 4-9: Testing and measurement techniques – Impulse magnetic field immunity testPublic Comment
BS EN 61000-6-1 Ed3.0 Electromagnetic Compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environmentsAccepted
BS EN 61000-6-2 Ed3.0 Electromagnetic Compatibility (EMC) - Part 6-2: Generic standards - Generic standards - Immunity standard for industrial environmentsPublic Comment
BS EN 61000-6-3 ED 2.0/A2 Ed 2 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environmentsPublic Comment
BS EN 61000-6-4 ED 2.0/A2 Ed 2 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environmentsPublic Comment
BS EN 61000-6-5 Ed1.0 Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for power station and substation environmentsApproval
BS EN 61010-2-201 Ed. 2.0 IEC 61010-2-201 Ed. 2.0 Safety requirements for electrical equipment formeasurement, control, and laboratory use - Part 2-201: Particular requirements for control equipmentPublic Comment
BS EN 61010-2-202 Ed. 1.0 IEC 61010-2-202 Ed. 1.0 Safety requirements for electrical equipment for measurement, controland laboratory use - Part 2-2 xx: Particular requirements for electrically operated valve and actuatorPublic Comment
BS EN 61045-1 Fixed film resistor networks for use in electronic equipment - Part 1 : Generic specificationPublic Comment
BS EN 61058-1 Switches for appliances - Part 1: General requirementsPublic Comment
BS EN 61058-1-1 Switches for appliances - Part 1-1: Requirements for mechanical switch constructionsPublic Comment
BS EN 61058-1-2 Switches for appliances - Part 1-2: Requirements for electronic switch constructionsPublic Comment
BS EN 61058-2-6 Switches for appliances - Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools, transportable tools and lawn and garden machinery.Idea
BS EN 61069-1 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment -Part 1:Terminology and basic conceptsPublic Comment
BS EN 61069-2 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 2: Assessment methodologyPublic Comment
BS EN 61069-3 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 3: Assessment of system functionalityPublic Comment
BS EN 61069-4 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 4: Assessment od system performancePublic Comment
BS EN 61069-5 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 5: Assessment of system dependabilityPublic Comment
BS EN 61069-6 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 6: Assessment of system operabilityPublic Comment
BS EN 61069-7 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 7: Assessment of system safety hazardPublic Comment
BS EN 61069-8 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 8: Assessment of other system propertiesPublic Comment
BS EN 61094-3 ED.2 Electroacoustics - Measurement microphones Part 3: Primary method for free field calibration of laboratory standard microphones by the reciprocity techniquePublic Comment
BS EN 61094-5 Ed 2.0 Measurement microphones Part 5: Methods for pressure calibration of working standard microphones by comparisonPublic Comment
BS EN 61156-10 Ed1.0 pair/quad cables for digitial communications Part 10: Cables for work area wiring with transmission characteristics up to 2 GHz - Sectional specificationPublic Comment
BS EN 61156-9 Ed1.0 pair/quad cables for digitial communications Part 9: Cables for horizontal floor wiring with transmission characteristics up to 2 GHz - Sectional specificationPublic Comment
BS EN 61169-11 Radio-frequency connectors Part 11: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9.5 mm with threaded coupling - characteristic impedance 50 ohm (Type 4.1-9.5)Accepted
BS EN 61169-52 Ed1.0 Radio- Frequency Connectors Part 52: Sectional specification for series MMCX RF coaxial connectorsPublication
BS EN 61169-53 Radio-frequency connectors Part 53: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 16 mm with screw lock -Characteristic impedance 50 ohm (Type S7-16)Publication
BS EN 61169-54 RADIO-FREQUENCY CONNECTORS Part 54: Sectional Specification for Coaxial Connectors with 10mm inner of outer Conductor,nominal Characteristic Impedance 50 Ohms, Series 4.3- 10Public Comment
BS EN 61169-58 Radio-frequency connectors Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - characteristic impedance 50 ohm (type SBMA)Public Comment
BS EN 61169-59 Radio-frequency connectors Part 59: Sectional specification for type L32-4 and L32-5 threaded multi-coaxial radio-frequency connectorsnull
BS EN 61196-1-110 Ed. 1.0 Coaxial communication cables Part 1-110: Electrical test methods - Test for continuityPublic Comment
BS EN 61196-1-114 Ed. 1.0 Coaxial communication cables Part 1-114: Electrical test methods - InductanceApproval
BS EN 61196-1-116 Ed. 1.0 Coaxial communication cables Part 1-116: Electrical test methods - Test for characteristic impedance with time domain reflectometry (TDR)Approval
BS EN 61196-1-209 Ed. 1.0 Coaxial communication cables Part 1-209: Environmental test methods - Thermal cyclingPublic Comment
BS EN 61196-1-215 Ed1.0 Environmental test methods Part 1-215: High Temperature Cable AgeingPublic Comment
BS EN 61196-10 Coaxial communication cables Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectricnull
BS EN 61196-11 Ed1.0 Coaxial communication cables Part 11: Sectional specification for semi-rigid cables with polyethylene (PE) dielectricPublic Comment
BS EN 61196-11-1 Ed.1 Coaxial communication cables Part 11-1: Blank detail specification for semi-rigid cables with polyethylene (PE) dielectricPublic Comment
BS EN 61196-4-1 Ed1.0 Coaxial communication cables Part 4-1: Blank detail specification for radiating cablesPublic Comment
BS EN 61196-9-1 Ed. 1.0 Coaxial communication cables Part 9-1: Blank detail specification for flexible RF coaxial cablesApproval
BS EN 61204-3 Low voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC)Public Comment
BS EN 61204-7 Low-voltage switch mode power supplies - Part 7: Safety requirementsPublic Comment
BS EN 61242:1997+A1:2008+A2 Electrical accessories – cable reels for household and similar purposesPublication
BS EN 61260-2 Ed1.0 and fractional-octave-band filters Part 2: Pattern evaluation testsPublication
BS EN 61260-3 Ed1.0 and fractional-octave-band filters Part 3: Periodic testsPublication
BS EN 61326-3-1 Ed. 2 Electrical equipment for measurement, control and laboratory use - EMCrequirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applicationsAccepted
BS EN 61326-3-2 Ed. 2 Electrical equipment for measurement, control and laboratory use - EMCrequirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environmentAccepted
BS EN 61377 Ed. 2.0 Railway Applications - Rolling stock - Combined-testing of motors andtheir control systemPublic Comment
BS EN 61400-1 Ed 4.0 Wind turbines Part 1: Design requirementsAccepted
BS EN 61400-12-1 Ed 2.0 Wind turbines Part 12-1: Power performance measurements of electricity producing wind turbinesAccepted
BS EN 61400-13 Wind turbines Part 13: Measurement of mechanical loadsPublic Comment
BS EN 61400-21-1 Wind turbines Part 21-1: Measurement and assessment of electricalcharacteristics - Wind turbinesAccepted
BS EN 61400-25-2 Ed 2.0 Wind turbines Part 25-2: Communications for monitoring and control of wind power plants - Information modelsPublication
BS EN 61400-25-3 Ed 2.0 Wind turbines Part 25-3: Communications for monitoring and control of wind power plants - Information exchange modelsPublication
BS EN 61400-25-4 Ed 2.0 Wind turbines Part 25-4: Communications for monitoring and control of wind power plants - Mapping to communication profilePublic Comment
BS EN 61427-2 Secondary cells and batteries for Renewable Energy Storage - General Requirements and methods of test Part 2: Photovoltaic on grid applicationApproval
BS EN 61466-1 Composite string insulator units for overhead lines with a nominalvoltage greater that 1000 V - Part 1: Standard strength and end fittingsPublic Comment
BS EN 61511-1 ED.2.0 Functional Safety - Safety instrumented systems for the process industrysector - Normative Part 1: Framework, definitions, system, hardware and software requirementsApproval
BS EN 61511-2 ED.2.0 Functional Safety - Safety instrumented systems for the process industrysector - Normative Part 2: Guidelines for the application of IEC 61511-1 - InformativeApproval
BS EN 61511-3 ED.2.0 Functional Safety - Safety instrumented systems for the process industrysector - Normative Part 3: Guidance for the determination of the required safety integrity levels - InformativeApproval
BS EN 61558-1 Ed3.0 Safety of power transformers, power supplies, reactors and similar products Part 1: General requirements and testsPublic Comment
BS EN 61669 Ed.2 Electroacoustics - Measurement of real-ear acoustical performance characteristics of hearing aidsApproval
BS EN 61726 ED.2 Cable assemblies, cables, connectors and passive coponents - screening attentuation measurement by the reverberation chamber methodApproval
BS EN 61770 to the water mains - Avoidance of backsiphonage and failure of hose-setsApproval
BS EN 61770: 2009/prAA: 2014 Electric appliances connected to the water mains - Avoidance ofbacksiphonage and failure of hose-setsPublic Comment
BS EN 61800-2 Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adj ustable frequency a.c. power drive systemsPublication
BS EN 61800-3:2004+A1:2012+A2 Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methodsAccepted
BS EN 61800-5-1:2007/A1 Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energyAccepted
BS EN 61800-5-2 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - FunctionalPublic Comment
BS EN 61800-7-1 Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definitionApproval
BS EN 61800-7-201 Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specificationApproval
BS EN 61800-7-202 Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specificationApproval
BS EN 61800-7-203 Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specificationApproval
BS EN 61800-7-204 Adjustable speed electrical power drive systems - Part 7-204: Generic interface and use of profiles for power drive systems - Profile type 4 specificationApproval
BS EN 61800-7-301 Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologiesApproval
BS EN 61800-7-302 Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologiesApproval
BS EN 61800-7-303 Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologiesApproval
BS EN 61800-7-304 Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologiesApproval
BS EN 61800-9-1 IEC 61800-9-1 Ed.1: Adjustable speed electrical power drive systems - Part 9-1: Eergy efficiency of power drive systems, motor starters, power electronics and their driven applications – General requirements for setting energy efficiency standards for power driven equipment using the Extended Product Approach (EPA) and semi analytic model (SAM)Public Comment
BS EN 61800-9-2 Adjustable speed electrical power drive systems - Part 9-2: Part 9-2: Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Energy efficiency indicators for power drive systems and motor startersPublic Comment
BS EN 61803:1999+A1:2010+ A2 Determination of power losses in high-voltage direct current (HVDC) converter stationsPublic Comment
BS EN 61935-2-21 Ed1.0 Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-21: Cord and work area cord category 6- Blank detail specificationPublic Comment
BS EN 61935-2-22 Ed.1 Generic cabling systems — Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-22: Cord and work area cord category 6A- Blank detail specificationPublic Comment
BS EN 61937-7 Ed.2/A1 Digital audio - Interface for non-linear PCM encoded audio bitstreamsapplying IEC 60958 - Part 7: Nonlinear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats (TA 4)Public Comment
BS EN 61954:2011+A2 Static VAR compensators (SVC) - Testing of thyristor valvesAccepted
BS EN 61966-2-4 Ed 1 Amd 1 Multimedia systems and equipment - Colour measurement and management - Part 2-4: Colour management - Extended-gamut YCC colour space for video applications - xvYCCPublic Comment
BS EN 61975:2010+A1 High-voltage direct current (HVDC) installations - System testsPublic Comment
BS EN 61982-4 Ed1.0 the propulsion of electric road vehicles Safety requirements of nickel-metal hydride cells and modulesPublic Comment
BS EN 61995-1:2008+A1 Devices for the connection of luminaires for household and similar purposes Part 1: General requirementsPublic Comment
BS EN 61995-2:2009+A1 Devices for the connection of luminaires for household and similar purposes Part 2: Standard sheets for DCLPublic Comment
BS EN 62040-1 Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPSPublic Comment
BS EN 62040-2 Ed3.0 Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility requirements (EMC)Accepted
BS EN 62040-5-3 Ed1.0 Uninterruptible power systems (UPS) - Part 5-3: Method of specifying the performance and test requirements for d.c. UPSPublic Comment
BS EN 62041 Safety of transformers, reactors, power supply units and combinations thereof - EMC requirementsPublic Comment
BS EN 62080:2009+A2 Sound signalling devices for household and similar purposesPublication
BS EN 62087-1 Methods of measurement for the power consumption of audio; video and related equipment Part 1: General (TA12)Publication
BS EN 62087-2 Audio, video, and related equipment - Determination of pow er consumption - Part 2: Signals and media Part 2: Signals and mediaPublication
BS EN 62087-3 Methods of measurement for the power consumption of audio; video and related equipment- Part 3: Television Sets (TA12)Publication
BS EN 62087-4 Methods of measurement for the power consumption of audio; video and related equipment Part 4: Video Recording Equipment (TA12)Publication
BS EN 62087-5 Methods of measurement for the power consumption of audio; video and related equipment Part 5: Set top boxes (TA12)Publication
BS EN 62087-6 Audio, video, and related equipment - Determination of pow er consumption - Part 6 Audio EquipmentPublication
BS EN 62104 Ed 3.0 Characteristics of DAB receivers (TA 1)Publication
BS EN 62133-1 Ed1.0 alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications Part 1: Nickel systemsPublic Comment
BS EN 62133-2 Ed1.0 alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications Part 2: Lithium systemsPublic Comment
BS EN 62153-4-10 Ed2 Metallic Communication Cable Test Methods Part 4-10: Electromagnetic compatability (EMC) - Shielded screening attenuation test method for measuring the screening effectiveness of feed-throughs and electromagnetic gaskets double coaxial methodApproval
BS EN 62153-4-6 Metallic Communication Cable test methods Part 4-6: Electromagnetic compatibility (EMC) - Surface transfer impedan impedance - line injection methodAccepted
BS EN 62153-4-7 Ed2.0 Metallic Communication Cable test methods Part 4-7: Electromagnetic compatibility (EMC) - Shielded screening attenuation test method for measuring the Transfer impedance Zt and the screening attenuation aS or the Coupling attenuation aC of RF-Connectors and assemblies up to and above 3 GHz; Tube in Tube methodApproval
BS EN 62209-1 Human exposure to radio frequency fields from hand-held and body-mountedwireless communication devices human models, instrumentation, and procedures Part 1: Procedure to determine the specific absorption rate (sar)for devices used next to the ear (frequency range of 300 mhz to 6 ghz)Public Comment
BS EN 62216 Ed 2.0 Digital terrestrial television receivers for the DVB-T system (TA 1)Accepted
BS EN 62232 Ed 2.0 Determination of RF field strength and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposureAccepted
BS EN 62304 Ed 1.0 /A1 Amendment 1 - Medical devices - Application of usability engineering to medical devicesApproval
BS EN 62304 ED 2.0 Medical device software - Software life cycle processesAccepted
BS EN 62379-3 Common Control Interface for networked digital audio and video products Part 3: VideoPublication
BS EN 62379-7 Common Control Interface for networked digital audio and video products Part 7: MeasurementsPublication
BS EN 62391-1 Fixed electric double-layer capacitors for use in electronic equipment - Part 1: Generic specificationApproval
BS EN 62424 Ed 2.0 control engineering - Request in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools.Publication
BS EN 62443-3-2 Industrial communication networks - Network and system security Part 3-2: Security assurance levels for zones and conduitsPublic Comment
BS EN 62443-4-1 Industrial communication networks - Security for industrial and control systems Part: 4-1: Product development requirementsPublic Comment
BS EN 62477-1:2012+A1 Safety requirements for power electronic converter systems and equipment- Part 1: GeneralPublic Comment
BS EN 62485-1 Safety requirements for secondary batteries and battery installations Part 1: Stationary batteriesApproval
BS EN 62609-1 Insulators for overhead lines - Composite line post insulators Part 1 - Definitions, End Fittings and Designationsnull
BS EN 62621 Railway applications - Fixed installations - Electric traction -Specific requirements for composite insulators used for overhead contactline systemsApproval
BS EN 62625-2 Electronic railway equipment - On-board driving data recording system Part 2: Conformance testingPublic Comment
BS EN 62660-3 ED 1.0 propulsion of electric road vehicles Part 3: Safety requirements of cells and modulesPublic Comment
BS EN 62665 Ed 2.0 Multimedia systems and equipment - Multimedia e-publishing and e-books technologies - Texture map for auditory presentation of printed textsPublication
BS EN 62680-1-1 Universal Serial Bus interfaces for data and power Part 1-1:Universal Serial Bus interfaces - common components - USB Battery Charging Specification; Revision 1.2 (TA 14)Publication
BS EN 62680-2-1 Universal Serial Bus interfaces for data and power Part 2-1: Universal Serial Bus Interfaces for data and power - Hi Speed USB 2.0 - Universal Serial Bus Specification; Revision 2.0 (TA 14)Publication
BS EN 62680-2-2 Universal Serial Bus interfaces for data and power Part 2-2: Universal Serial Bus interfaces for data and power - Hi-Speed 2.0 - Universal Serial Bus Micro-USB Cables and Connectors Specification; Revision 1.01 (TA14)Specification; Revision 1.01Publication
BS EN 62680-2-3 Universal Serial Bus interfaces for data and power Part 2-3: Universal Serial Bus interfaces for data and power - Hi Speed USB 2.0 - Universal Bus Cables and Connectors Class Document Revision 2.0Publication
BS EN 62702-1-1 Audio archive system - Part 1-1: DVD disk and data migration for long term audio data storagePublication
BS EN 62704-1 Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices; 30 MHz - 6 GHz- Part 1: General Requirements for using the Finite Difference Time Domain (FDTD) MethoAccepted
BS EN 62704-2 Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices: Specific Requirements for Finite Difference Time Domain (FDTD) Modelling of Exposure from Vehicle Mounted AntennasAccepted
BS EN 62704-3 Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices; 30 MHz - 6 GHz: Specific Requirements for using the Finite-Difference Time-Domain (FDTD) Method for SAR Calculations of MobileAccepted
BS EN 62718 Railway applications - Rolling stock - DC supplied electronic ballastsfor lighting fluorescent lampsApproval
BS EN 62735-2 Ed1.0 D.C. Plugs and socket-outlets to be used in indoor access controlledareas - Part 2: Plug and socket-outlet system for 5,2 kWIdea
BS EN 62742 Electrical and electronic installations in ships - Electromagnetic compatibility - Ships with a non-metallic hullAccepted
BS EN 62753 Digital Terrestrial Television Receivers for the DTMB systemPublication
BS EN 62760 Audio reproduction method for normalized loudness level (TA11)Approval
BS EN 62764-1 Procedures for the measurement of field levels generated by electronic and electrical equipment in the automotive environment with respect to human exposure Part 1 : Low frequency magnetic fieldAccepted
BS EN 62766-1 Ed1.0 terminal function and network interfacesfor access to IPTV and open Internet multimedia services Part 1: GeneralPublic Comment
BS EN 62766-2-1 Ed1.0 terminal function and network interfacesfor access to IPTV and open Internet multimedia services – Part 2-1: Media formatsPublic Comment
BS EN 62766-2-2 Ed1.0 terminal function and network interfacesfor access to IPTV and open Internet multimedia services – Part 2-2: HTTP adaptive streamingPublic Comment
BS EN 62766-3 Ed1.0 terminal function and network interfacesfor access to IPTV and open Internet multimedia services – Part 3: Content metadataPublic Comment
BS EN 62766-4-1 Ed. 1.0 Open IPTV Forum (OIPF) Consumer Terminal Function and Network Interfacesfor Access to IPTV and Open Internet Multimedia Services - P Part 4-1: ProtocolsAccepted
BS EN 62766-4-2 Ed. 1.0 Consumer Terminal Function and Network Interfacesfor Access to IPTV and Open Internet Multimedia Services - P Part 4-2: Examples of Protocol SequenceAccepted
BS EN 62766-5-1 Ed. 1.0 Consumer Terminal Function and Network Interfaces for Access to IPTV and Open Internet Multimedia Services - P Part 5-1: Declarative Application EnvironmentAccepted
BS EN 62766-5-2 Ed. 1.0 Consumer Terminal Function and Network Interfaces for Access to IPTV and Open Internet Multimedia Services - P Part 5-2: Web Standards TV ProfileAccepted
BS EN 62766-6 Ed. 1.0 Consumer Terminal Function and Network Interfaces for Access to IPTV and Open Internet Multimedia Services - P Part 6: Procedural Application EnvironmentAccepted
BS EN 62766-7 Ed. 1.0 Consumer Terminal Function and Network Interfaces for Access to IPTV and Open Internet Multimedia Services - P Part 7: Authentication, Content Protection and Service ProtectionAccepted
BS EN 62766-8 Ed. 1.0 Consumer Terminal Function and Network Interfaces for Access to IPTV and Open Internet Multimedia Services - P Part 8: ProfilesAccepted
BS EN 62767 Air Interface Protocol for local multilingual broadcasting (TA 4)Public Comment
BS EN 62772 Composite hollow core station post insulators for substations with a.c. and d.c.voltages greater than 1 000 V - Definitions, test methods and acceptance criteriaAccepted
BS EN 62777 Quality evaluation method for the sound field of directional speaker array system (TA 11)Public Comment
BS EN 62783-1Ed.1 TWINAX CABLES FOR DIGITAL COMMUNICATIONS - Part 1: GENERIC SPECIFICATIONPublic Comment
BS EN 62783-2 TWINAX CABLES FOR DIGITAL COMMUNICATIONS Part 2: CABLE FOR ETHERNET-OVER-TWINAX PHYSICAL INTERFACESAccepted
BS EN 62807-1 Hybrid telecommunication cablesAccepted
BS EN 62812 Method of measurement of low resistanceAccepted
BS EN 62822-1/Amd 1 Assessment of electric welding equipment related to restrictions ofhuman exposure to electromagnetic fields (0 Hz - 300 GHz) Part 1: Product family standardApproval
BS EN 62822-2 Ed1.0 Assessment of electric welding equipment related to restrictions of human exposure to electromagnetic fields (0 Hz – 300 GHz) - Part 2: Basic Standard for Arc WeldingPublic Comment
BS EN 62822-3 Resistance welding equipment Part 3: Basic standard for the evaluation of human exposure to to electromagnetic fields from equipment for resistance welding and allied processesAccepted
BS EN 62823 Thyristor valves for thyristor controlled series capacitors (TCSC) - Electrical testingPublication
BS EN 62827-1 Wireless Power Transfer - Management Part 1: Common ComponentsApproval
BS EN 62827-2 Ed1.0 Power Transfer - Management - - Part 2: Multiple devices control management (TA 15)Accepted
BS EN 62827-3 Ed1.0 Wireless Power Transfer – Management - Part 3: Multiple sources control managementPublic Comment
BS EN 62832 Industrial-process measurement; control and automation - Reference model for representation of production facilities (Digital Factory)Accepted
BS EN 62842 File allocation system with minimized reallocation for multimedia home server (TA8)Approval
BS EN 62846 Ed. 1.0 Railway applications - Current collection systems - Requirements for andvalidations of measurements of the dynamic interaction betweenpantograph and overhead contact lineAccepted
BS EN 62864-1 ED 1.0 stock - Power supply with onboard energystorage system Part 1: Series hybrid systemPublic Comment
BS EN 62877-1 Ed1.0 acid accumulators Part 1: Requirements for electrolytePublic Comment
BS EN 62877-2 Ed1.0 acid accumulators Part 2: Requirements for waterPublic Comment
BS EN 62881 Cause & Effect TableAccepted
BS EN 62890 Ed. 1.0 Life-cycle management for systems and products used inindustrial-process measurement, control and automationPublic Comment
BS EN 62909-1 Bi-directional grid connected power converters - Part 1: General requirementsAccepted
BS EN 62927 Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical testingAccepted
BS EN 62928 Ed. 1.0 Railway applications - Rolling stock equipment - Onboard lithium-iontraction batteriesAccepted
BS EN 62928 Railway applications - Rolling stock equipment - Onboard lithium-iontraction batteriesAccepted
BS EN 62943 Ed. 1.0 Visible light beacon system for multimedia applicationsPublic Comment
BS EN 62944 Ed. 1.0 IEC 62944: Digital Television Accessibility - Functional SpecificationsPublic Comment
BS EN 62956 Hybrid electric double layer capacitors for use in electric and electronic equipment - Test methods for electrical characteristicsAccepted
BS EN 62962 ed1.0 Particular requirements for load-shedding equipment (LSE)Idea
BS EN 62991 Particular requirements for switching equipment to control power sources(SECPS)Idea
BS EN 63002 Ed. 1.0 Identification and Communication Interoperability Method for ExternalPower Supplies Used With Portable Computing Devices (TA 14)Public Comment
Opens a new windowBS EN 754-1 Aluminium and aluminium alloys - Cold drawn rod/bar and tube Part 1: technical conditions for inspection and deliveryApproval
BS EN 754-7 Aluminium and aluminium alloys - Cold drawn rod/bar and tube Part 7: Seamless tubes, tolerances on dimensions and formAccepted
BS EN 754-8 Aluminium and aluminium alloys - Cold drawn rod/bar and tube Part 8: Porthole tubes, tolerances on dimensions and formAccepted
BS EN 755-1 Aluminium and aluminium alloys- Extruded rod/bar, tube and profiles Part 1: Technical conditions for inspection and deliveryAccepted
Opens a new windowBS EN 755-2 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles Part 2: Mechanical propertiesApproval
BS EN 755-7 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles Part 7: Seamless tubes, tolerances on dimensions and formAccepted
BS EN 755-8 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles Part 8: Porthole tubes, tolerances on dimensions and formAccepted
BS EN 755-9 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles Part 9: Profiles, tolerances on dimensions and formAccepted
BS EN 80005-1 Ed 2.0 Utility connections in port Part 1: High Voltage Shore Connection (HVSC) Systems - General requirementsAccepted
BS EN 80005-2 Utility connections in port Part 2: High voltage shore connection (HVSC) systems - Communication for monitoring and controlPublic Comment
BS EN 80005-3 Utility connections in port Part 3: Low Voltage Shore Connection (LVSC) Systems - General requirementsAccepted
BS EN 81-70 Safety rules for the construction and installations of lifts Particular applications for passenger and good passengers lifts - Part 70: Accessibility to lifts for persons including persons with disabilityAccepted
BS EN 81-71 Safety rules for the construction and installation of lifts Particular applications to passenger lifts and goods passenger lifts - Part 71: Vandal resistant liftsAccepted
BS EN 81-73 Safety rules for the construction and installation of lifts Particular applications for passenger lifts - Part 73: Behaviour of lifts in the event of fireTechnical Review
BS EN 82304-1 Healthcare software systems Part 1: General requirementsPublic Comment
Opens a new windowBS EN 88-1:2011 +A1 safety devices for gas appliances Part 1: Pressure regulators for inlet pressures up to and including 50 kPaApproval
BS EN 88-2 Safety and control devices for gas burners and gas burning appliances —Part 2: Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa and associated safety devicesPublic Comment
BS EN IEC 60317-67 Specifications for particular types of winding wires Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class 105Accepted
BS EN ISO 13162 Water quality - Determination of carbon 14 activity - Liquid scintillation counting methodPublication
BS EN ISO 3691-3 Industrial trucks - Safety requirements and verification Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loadsApproval
BS EN PNW 9-1872 Ed. 1.0 Railway applications - Fixed installations - Stationary energy storagesystem for DC traction systemsAccepted
BS EN PWI 9-12 Ed. 1.0 Lithium-Ion Traction Batteries for Railways ApplicationsAccepted
BS EN WI 00230337 Water quality - General requirements and performance test procedures for water monitoring equipment - Automated measuring devicesIdea
BS EN WI 16796-1 Energy efficiency of Industrial trucks - Test methods Part 1 : GeneralPublic Comment
BS EN WI 16796-2 Energy efficiency of Industrial trucks - Test methods Part 2 : Operator controlled self-propelled trucks, towing tractors and burden-carrier trucksPublic Comment
BS EN WI 16796-3 Energy efficiency of Industrial trucks - Test methods Part 3 : Container handling lift trucksPublic Comment
BS EN WI 16820 assemblies for use in the pharmaceutical and biotechnological industry with hoses of non-metallic materials - Elastomeric hoses with or without liningPublic Comment
BS EN WI 16821 assemblies for use in the pharmaceutical and biotechnological industry with hoses of non-metallic materials - Silicone rubber hosePublic Comment
BS EN50561-1:2013/COR2 Power line communication apparatus used in low-voltage installations —Radio disturbance characteristics — Limits and methods of measurement Part 1: Apparatus for in-home usePublication
BS EN55022:2010/COR2 Information technology equipment — Radio disturbance characteristics —Limits and methods of measurementPublication
BS EN55032:2012/COR3 Electromagnetic compatibility of multimedia equipment — EmissionrequirementsPublication
BS ENISO 10704 Water quality - Measurement of gross alpha and gross beta activity in non-saline water - Thin source deposit methodPublication
BS ENISO 11663 Quality of dialysis fluid for haemodialysis and related therapiesApproval
BS ENISO 11704 Water quality - Measurement of gross alpha and beta activity concentration in non-saline water - Liquid scintillation counting methodPublication
BS ENISO 12417-1 Cardiovascular implants and extracorporeal systems - Vascular device-drug combination productsPublication
BS ENISO 13564-2 Powered industrial trucks - Test methods for verification of visibility Part 2: Sit-on and stand-on operator trucks and variable reach trucks greater than 10000 kg capacityAccepted
BS ENISO 13958 Concentrates for haemodialysis and related therapiesApproval
BS ENISO 13959 Water for haemodialysis and related therapiesApproval
Opens a new windowBS ENISO 1401 Rubber hoses for agricultural sprayingPublic Comment
Opens a new windowBS ENISO 14708-3 implantable medical devices Part 3: Implantable neurostimulatorsPublic Comment
BS ENISO 16230-1 Agricultural machinery and tractors — Safety of higher voltage electrical and electronic components and systems Part 1: General requirementsPublication
BS ENISO 16231-2 Self-propelled agricultural machinery - Assessment of stability Part 2: Calculations and test proceduresPublication
BS ENISO 18278-2 Resistance welding - Weldability Part 2: Evaluation procedures for weldability in spot weldingApproval
BS ENISO 18497 Safety of highly automated agricultural machinesPublic Comment
Opens a new windowBS ENISO 22829 Transformer-rectifier for welding guns with integrated transformers - Transformer-rectifier units operating at 1000 Hz frequencyPublic Comment
BS ENISO 23500 Guidance for the preparation and quality management of fluids for haemodialysis and related therapiesApproval
Opens a new windowBS ENISO 2398 compressed air - SpecificationPublic Comment
BS ENISO 25539-1 Cardiovascular implants - Endovascular devices Part 1: Endovascular prosthesesPublic Comment
BS ENISO 26722 Water treatment equipment for haemodialysis applications and related therapiesApproval
BS ENISO 27508 Resistance spot welding — weld bonding of coated and uncoated sheet materialsAccepted
BS ENISO 3691-2 Industrial trucks - Safety requirements and verification Part 2: Self-propelled variable-reach trucksApproval
BS ENISO 3949 Textile-reinforced types for hydraulic applications - SpecificationAccepted
BS ENISO 4254-1 Agricultural machinery - Safety Part 1: General requirements (ISO 4254-1:2013)Approval
BS ENISO 5182 electrodes and ancillary equipmentPublic Comment
BS ENISO 5774 for compressed-air applications - SpecificationApproval
BS ENISO 5840-1 Cardiovascular implants - Cardiac valve prostheses Part 1: General requirementsPublication
BS ENISO 5840-2 Cardiovascular implants - Cardiac valve prostheses Part 2: Surgically implanted valve substitutesPublication
BS ENISO 6134 saturated steam - SpecificationPublic Comment
BS ENISO 669 Resistance welding - Resistance welding equipment - Mechanical and electrical requirementsApproval
BS ENISO 6802 assemblies with wire reinforcements - Hydraulic impulse test with flexingPublic Comment
BS ENISO 6803 assemblies - Hydraulic-pressure impulse test without flexingPublic Comment
BS ENISO 6806 in oil burners - SpecificationPublic Comment
BS ENISO 7198 Cardiovascular implants - Tubular vascular prosthesesPublic Comment
BS ENISO 7199 Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators)Public Comment
BS ENISO 7233 assemblies - Determination of resistance to vacuumPublic Comment
BS ENISO 7326 ozone resistance under static conditionsPublic Comment
Opens a new windowBS ENISO 7751 assemblies - Ratios of proof and burst pressure to maximum working pressurePublic Comment
Opens a new windowBS ENISO 8028 assemblies for airless paint spraying - SpecificationPublic Comment
Opens a new windowBS ENISO 8033 of adhesion between componentsPublic Comment
BS ENISO 8049 Ferronickel shot - Sampling for analysisPublic Comment
BS ENISO 8308 Determination of transmission of liquids through hose and tubing wallsApproval
BS ENISO 8331 assemblies - Guidelines for selection, storage, use and maintenancePublic Comment
BS ENISO 8430-1 Resistance spot welding - Electrode holders Part 1: Taper fixing 1:10Approval
BS ENISO 8430-2 Resistance spot welding - Electrode holders Part 2: Morse taper fixingApproval
BS ENISO 8430-3 Resistance spot welding - Electrode holders Part 3: Parallel shank fixing for end thrustApproval
BS IEC 60050-726 Ed2.0 IEC 60050-726. International electrotechnical vocabulary. Transmissionlines and waveguidesPublic Comment
BS IEC 60092-202 Ed 5.0 Electrical installations in ships Part 202: System design - ProtectionPublic Comment
BS IEC 60092-506 Electrical installations in ships – Part 506: Special features – Ships carrying specific dangerous goods andmaterials hazardous only in bulkAccepted
BS IEC 60393-2 Potentiometers for use in electronic equipment. Part 2: Sectional specification: Lead-screw actuated and rotary preset potentiometersApproval
BS IEC 60393-5 Potentiometers for use in electronic equipment. Part 5: Sectional specification - Single-turn rotary low-power wirewound and non-wirewound potentiometersApproval
BS IEC 60393-6 Potentiometers for use in electronic equipment. Part 6: Sectional specification - Surface mount preset potentiometersApproval
BS IEC 60533 Ed 3.0 installations in ships - Electromagnetic compatibilityPublication
BS IEC 60728-101 sound signals and interactive services - System performance for forward path with all digital channels loadApproval
BS IEC 61935-1 CABLING IN ACCORDANCE WITH ISO/IEC 11801 Part 1: Installed cablingApproval
BS IEC 61935-2-23 Generic cabling systems – Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-23: Cord and work area cord category 7 – Blank detail specificationPublication
BS IEC 61935-2-24 Generic cabling systems – Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-24: Cord and work area cord category 7A – Blank detail specificationPublication
BS IEC 62153-4-15 Ed.1 Metallic Communication Cable test methods Part 4-15: Electromagnetic compatibility (EMC) – Test method for measuring transfer impedance and screening attenuation – or coupling attenuation with Triaxial CellPublic Comment
BS IEC 62231-1 Ed1.0 Composite station post insulators for substations with ac voltages greater than 1 000 V up to 245 kV – Part 1: Dimensional, mechanical and electrical characteristicsApproval
BS IEC 62605 Ed. 2 Multimedia e-publishing and e-bookstechnologies - Texture map for auditory presentation of printed textsApproval
BS ISO 10261:2002/Amd 1 Earth-moving machinery - Product identification numbering system - Amendment 1Public Comment
BS ISO 10656 Electric resistance welding - Integrated transformers for welding gunsPublic Comment
BS ISO 10865-2 Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers Part 2: Systems for forward-facing wheelchair-seated passengers Systems for forward facing wheelchair-seated passengersPublication
BS ISO 10896-2 Rough-terrain trucks - Safety requirements and verification Part 2: Slewing trucksPublic Comment
BS ISO 10896-4 Rough-terrain trucks - Safety requirements and verification Part 4: Freely swinging loadsApproval
BS ISO 10896-5 Rough-terrain trucks - Safety requirements and verification Part 5: Interface between rough-terrrain truck and integrated personnel work platformPublication
BS ISO 10896-6 Rough-terrain trucks - Safety requirements and verification Part 6: Tilting operator's cabsApproval
BS ISO 10906 Earth-moving machinery - Auditory warning devices - Laboratory test procedure and requirementsIdea
BS ISO 10924-5 Road vehicles - Circuit breakers - Part 5: Circuit breakers with rated voltage of 450 V.Public Comment
BS ISO 10987-2 Earth-moving machinery - Sustainability Part 2: RemanufacturingIdea
BS ISO 10987-3 Earth-moving machinery - Sustainability Part 3: Used machinesIdea
BS ISO 11001-1 Agricultural wheeled tractors and implements - Three-point hitch couplers Part 1: U-frame couplerPublic Comment
BS ISO 11424 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - SpecificationPublic Comment
BS ISO 11525-2 Rough-terrain trucks - User requirements Part 2: Slewing variable-reach trucksApproval
BS ISO 11525-4.2 Rough-terrain trucks - User requirements Part 4: Requirements for trucks operating with freely swinging loadsPublic Comment
BS ISO 11759 Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) - SpecificationPublic Comment
BS ISO 11783-1 Tractors and machinery for agriculture and forestry - Serial control and communications data network Part 1: General standard for mobile data communicationPublic Comment
BS ISO 11783-10 Tractors and machinery for agriculture and forestry - Serial control and communications data network Part 10: Task controller and management information system data interchangePublication
BS ISO 11898-1 Road vehicles - Controller area network (CAN) Part 1: Data link layer and physical signallingPublic Comment
BS ISO 11898-2 Road vehicles - Controller area network (CAN) - Part 2:High-speed medium access unitAccepted
BS ISO 11992-1 Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles Part 1: Physical and data-link layersIdea
BS ISO 11992-3 Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles Part 3: Application layer for equipment other than brakes and running gearIdea
BS ISO 12117-2:2008/Amd 1 Earth-moving machinery - Laboratory tests and performance requirements for protective structures of excavators Part 2: Roll-over protective structures (ROPS) for excavators of over 6 t - Amendment 1Public Comment
BS ISO 12175:1994/Amd 1 Space data and information transfer systems - Standard formatted data units - Structure and construction rules - Amendment 1Publication
BS ISO 12208 Space systems - Space environment (natural and artificial) - Observed proton fluences over long duration at GEO and guideline for selection of confidence level in statistical model of solar proton fluencesPublic Comment
Opens a new windowBS ISO 13031 Earth-moving machinery - Quick couplers - SafetyPublic Comment
BS ISO 13363 Rubber and plastics hoses for marine-engine wet-exhaust systems - SpecificationApproval
BS ISO 13400-3 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 3: Wired vehicle interface based on IEEE 802.3Accepted
BS ISO 13400-4 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) Part 4: Ethernet Diagnostic ConnectorPublic Comment
BS ISO 13526:2010/Amd 1 Space data and information transfer systems - Tracking data message - Amendment 1Publication
BS ISO 13766-1 Earth-moving machinery - Electromagnetic compatibility Part 1: Functional EMC requirements under typical EMC environmental conditionsAccepted
BS ISO 13766-2 Earth-moving machinery - Electromagnetic compatibility Part 2: EMC requirements under the aspect of functional safetyAccepted
BS ISO 13775-1 Thermoplastic tubing and hoses for automotive use Part 1: Non-fuel applicationsApproval
BS ISO 13775-2 Thermoplastic tubing and hoses for automotive use Part 2: Petroleum-based-fuel applicationsPublic Comment
BS ISO 14269-2:1997/Amd 1 Tractors and self-propelled machines for agriculture and forestry - Operator enclosure environment Part 2: Heating, ventilation and air-conditioning test method and performance - Amendment 1Accepted
BS ISO 1436 Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - SpecificationApproval
BS ISO 14982 Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteriaAccepted
BS ISO 14990-1 Earth-moving machinery - Electrical safety of machines utilising electric drives and related components and systems Part 1: General RequirementsPublic Comment
BS ISO 14990-2 Earth-moving machinery - Electrical safety of machines ut ilising electric drives and related components and systems Part 2: Particular requirements for externally-powered machinesPublic Comment
BS ISO 14990-3 andrelatedcomponentsandsystems Earth-movingmachinery--Electricalsafetyofmachinesutili singelectricdrives Part 3: Particular requirements for self-powered machinesPublic Comment
Opens a new windowBS ISO 15031-3 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics Part 3: Diagnostic connector and related electrical circuits:specification and usePublic Comment
BS ISO 15118-7 Road vehicles - Vehicle to grid communication interface Part 7: Network and application protocol requirements for wireless communicationAccepted
BS ISO 15118-8 Road vehicles - Vehicle to grid communication interface Part 8: Physical layer and data link layer requirements for wireless communicationAccepted
BS ISO 15674 Cardiovascular implants and artificial organs - Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bagsPublic Comment
BS ISO 15675 Cardiovascular implants and artificial organs - Cardiopulmonary bypass systems - Arterial blood line filtersPublic Comment
BS ISO 15676 Cardiovascular implants and artificial organs - Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO)Public Comment
BS ISO 15765-2 Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) - Part 2: Transport protocol and network layer services.Public Comment
BS ISO 15765-4 Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) Part 4: Requirements for emissions-related systemsPublic Comment
BS ISO 15818 Earth-moving machinery - Lifting and tying-down attachment points - Performance requirementsPublic Comment
BS ISO 16001 Earth-moving machinery - Hazard detection systems and visual aids - Performance requirements and testsAccepted
BS ISO 16157 Human-Life Activity Support Systems and Equipment Integration in Space Flight - Techno-Medical Requirements for Space Vehicle Human Habitation EnvironmentsAccepted
BS ISO 16220 Magnesium and magnesium alloys - Magnesium alloy ingots and castingsAccepted
BS ISO 16301 Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for hydraulic jacks applications - SpecificationAccepted
BS ISO 16374 Evaluation method for cleanness of magnesium and magnesium alloy ingotsPublic Comment
BS ISO 16411 Tractors and machinery for agriculture and forestry - Slow moving vehicle identification emblem (SMV emblem)Accepted
BS ISO 16679 Space systems - Relative motion analysis elements after LV/SC separationPublication
BS ISO 16726 Human-Life Activity Support Systems and Equipment Integration in Space Flight - Techno-Medical Requirements for Space Vehicle Human Habitation Environments - Requirements for the air quality affected by harmful chemical contaminantsAccepted
BS ISO 16840-2 Wheelchair seating Part 2: Determination of physical and mechanical characteristics of devices intended to manage tissue integrity - Seat cushionsPublic Comment
BS ISO 16845-1 Road vehicles - Controller area network (CAN) conformance test plan - Part 1:Data link layer and physical signalingAccepted
BS ISO 17546 Space systems - Lithium ion battery for space vehicles - Design and verification requirementsPublic Comment
BS ISO 17666 Space systems - Risk managementPublic Comment
BS ISO 17689 Space systems - Interface control documents between ground technological equipment, launch site systems and launch vehicle with payloadApproval
BS ISO 17757 Earth-moving machinery - Autonomous machine safetyIdea
BS ISO 17987-1 Road vehicles - Local interconnect network (LIN) - Part 1: General information and use case definitionPublic Comment
BS ISO 17987-2 Road vehicles - Local interconnect network (LIN) - Part 2: Transport protocol and network layer servicesPublic Comment
BS ISO 17987-3 Road vehicles - Local interconnect network (LIN) - Part 3: Protocol specificationPublic Comment
BS ISO 17987-4 Road vehicles - Local interconnect network (LIN) - Part 4: Electrical Physical Layer (EPL) specification 12V/24VPublic Comment
BS ISO 17987-6 Road vehicles - Local interconnect network (LIN) - Part 6: Protocol conformance test specificationPublic Comment
BS ISO 17987-7 Road vehicles - Local interconnect network (LIN) - Part 7: Electrical Physical Layer (EPL) conformance test specificationPublic Comment
BS ISO 18063-1 Rough-terrain trucks - Visibility - Test methods and their verification Part 1: Variable-reach trucksPublic Comment
BS ISO 18202 Space data and information transfer systems - Mission operations message abstraction layerPublic Comment
BS ISO 18238 Space systems - Closed loop problem solving managementPublic Comment
BS ISO 18241 Cardiovascular implants and extracorporeal systems - Cardiopulmonary bypass systems - Venous bubble trapsPublic Comment
BS ISO 18242 Cardiovascular implants and extracorporeal systems - Centrifugal blood pumpsPublic Comment
BS ISO 18257 Space systems - Semiconductor integrated circuits for space applications - Design requirementsPublic Comment
BS ISO 18322-2 accreditation of space test centers and laboratoriesAccepted
BS ISO 18423 Space data and information transfer systems - Pseudo-Noise (PN) Ranging SystemsApproval
BS ISO 18479-1 Rough-terrain trucks - Non-integrated personnel work platforms Part 1: Design requirementsApproval
BS ISO 18479-2.2 personnel work platforms Part 2: User requirementsPublic Comment
BS ISO 18676 Space Systems - Guidelines for the management of systems engineering processesIdea
BS ISO 18677 Method of analyzing oxygen for evaluating magnesium and magnesium alloysAccepted
Opens a new windowBS ISO 18762 Tubes of titanium and titanium alloys - Welded tubes for condensers and heat exchangers - Technical deliverly conditionsPublic Comment
BS ISO 19013-2 Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification Part 2: Gasoline fuelsApproval
BS ISO 19059 Magnesium and magnesium alloys - Determination of berylliumAccepted
BS ISO 19060 Magnesium and magnesium alloys - Determination of tinAccepted
BS ISO 19385 Rubber hoses and hose assemblies for Water Jetting or Water blasting applicationsAccepted
BS ISO 19453-1-1 and testing for electrical and electronic equipment for drive system of electric propulsion vehicles Part 1: GeneralIdea
BS ISO 19453-2 Road vehicles - Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles Part 2: Mechanical loadsIdea
BS ISO 19453-3 Road vehicles - Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles Part 3: Climatic loadsIdea
BS ISO 19453-4 Road vehicles - Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles Part 4: Chemical loadsIdea
BS ISO 19683 Space systems - Design qualification and acceptance tests of small-scale satellite and units seeking low-cost and fast-deliveryAccepted
BS ISO 19711-1 Building construction machinery and equipment - Truck mixers Part 1: Terminology and commercial specificationsAccepted
BS ISO 19718 Rubber and plastics hoses and hose assemblies, wire- or textile- reinforced, for hydraulic power units used in hydraulic tool applications - SpecificationAccepted
BS ISO 19720-1 Building construction machinery and equipment - Machinery and plants for the preparation of concrete and mortar Part 1: Terminology and Commercial specificationsIdea
BS ISO 19826 Space systems - Programme management --Management of product characteristicsAccepted
BS ISO 19923 Space environment (natural and artificial) - Spacecraft potential estimation in worst case environmentIdea
BS ISO 19924 Space systems - Acoustic testingIdea
BS ISO 19971 Space systems - Spacecraft and launch vehicle Combined Operation Plan (COP) at launch site - General formatIdea
BS ISO 20076 Road Vehicles - Test methods and performance requirements for high voltage connectorIdea
BS ISO 20077-1 Road Vehicles - Extended Vehicle Part 1: General informationIdea
BS ISO 20077-2 Road Vehicles - Extended Vehicle Part 2: Methodology for designing the extended vehicleIdea
BS ISO 20080 Road vehicles - Information for remote diagnostic support - General requirements, definitions and use casesIdea
BS ISO 20104 Space data and information transfer systems - Producer-Archive Interface Specification (PAIS)Approval
BS ISO 20105 Space data and information transfer systems - Operation of CFDP over encapsulation serviceApproval
BS ISO 20106 Space data and information transfer systems - Mission operations common object modelApproval
BS ISO 20107 Space data and information transfer systems - Spacecraft onboard interface services - Device virtualization serviceApproval
BS ISO 20188 Space systems - Product assurance requirements for commercial satellitesIdea
BS ISO 20205 Space data and information transfer systems - Spacecraft Onboard Interface Systems - Low Data-Rate Wireless Communications for Spacecraft Monitoring and ControlApproval
BS ISO 20206 Space data and information transfer systems - IP over CCSDS space linksApproval
BS ISO 20207 Space data and information transfer systems - CCSDS Space Link Protocols over ETSI DVB-S2 StandardApproval
BS ISO 20208 Space data and information transfer systems - Delta-DOR Raw Data Exchange FormatApproval
BS ISO 20210 Space data and information transfer systems - Mission Operations Message Abstraction Layer - JAVA APIApproval
BS ISO 20211 Space data and information transfer systems - Spacecraft Onboard Interface Services - Device Access ServiceApproval
BS ISO 20213 Space data and information transfer systems - Spacecraft onboard interface services - Message transfer serviceApproval
BS ISO 20214 Space data and information transfer systems - Security architecture for space data systemsApproval
BS ISO 20215 Space data and information transfer systems - CCSDS cryptographic algorithmsApproval
BS ISO 20216 Space data and information transfer systems - Spacecraft onboard interface services - Device data pooling serviceApproval
BS ISO 20217 Space data and information transfer systems - Spacecraft onboard interface services - File and packet store servicesApproval
BS ISO 20258 Magnesium alloys - Determination of Li by ICP-AESIdea
BS ISO 20260 Magnesium and magnesium alloys - Determination of MercuryIdea
BS ISO 20383 Tractors and machinery for agriculture and forestry - Speed Identification Symbol (SIS)Accepted
BS ISO 20424 Petroleum products and lubricants - Biodiesel - Determination of sulfur content by inductively coupled plasma optical emission spectrometry (ICPOES)Idea
BS ISO 20474-1 Earth-moving machinery - Safety Part 1: General requirementsAccepted
BS ISO 20474-10 Earth-moving machinery - Safety Part 10: Requirements for trenchersAccepted
BS ISO 20474-11 Earth-moving machinery - Safety Part 11: Requirements for earth and landfill compactorsAccepted
BS ISO 20474-12 Earth-moving machinery - Safety Part 12: Requirements for cable excavatorsAccepted
BS ISO 20474-13 Earth-moving machinery - Safety Part 13: Requirements for rollersAccepted
BS ISO 20474-2 Earth-moving machinery - Safety Part 2: Requirements for tractor-dozersAccepted
BS ISO 20474-3 Earth-moving machinery - Safety Part 3: Requirements for loadersAccepted
BS ISO 20474-4 Earth-moving machinery - Safety Part 4: Requirements for backhoe-loadersAccepted
BS ISO 20474-5 Earth-moving machinery - Safety Part 5: Requirements for hydraulic excavatorsAccepted
BS ISO 20474-6 Earth-moving machinery - Safety Part 6: Requirements for dumpersAccepted
BS ISO 20474-7 Earth-moving machinery - Safety Part 7: Requirements for scrapersAccepted
BS ISO 20474-8 Earth-moving machinery - Safety Part 8: Requirements for gradersAccepted
BS ISO 20474-9 Earth-moving machinery - Safety Part 9: Requirements for pipelayersAccepted
BS ISO 20584 Space environment (natural and artificial) - Spacecraft charging - Earth orbitIdea
BS ISO 20618 Space data and information transfer systems - Spacecraft onboard interface services - Device enumeration servicePublic Comment
BS ISO 20730 Road vehicles - Vehicle roadworthiness interface for electronic Periodical Technical Inspection (ePTI) - Communication requirementsIdea
BS ISO 20780 Space systems - Fiber optic components - Design and verification requirementsIdea
BS ISO 20782 Petroleum products and other liquids - Ethanol -Test method for pH determination of ethanol fuelIdea
BS ISO 20907 Space systems - General requirements for accreditation of space test centers and laboratories - ProcessIdea
BS ISO 21459 Space data and information transfer systems - Proximity-1 space link protocol - Coding and synchronization sublayerApproval
BS ISO 21460 Space data and information transfer systems - Proximity-1 space link protocol - Physical layerApproval
BS ISO 22201-1 Lifts (elevators), escalators and moving walks - Programmable electronic systems in safety related applications Part 1: Lifts (elevators) (PESSRAL)Accepted
BS ISO 22201-2 Lifts (elevators), escalators and moving walks - Programmable electronic systems in safety related applications Part 2: Escalators and moving walks (PESSRAE)Accepted
BS ISO 22642 Space data and information transfer systems - TC (telecommand) synchronization and channel codingPublic Comment
BS ISO 22645:2005/Amd 1 Space data and information transfer systems - TM (telemetry) space data link protocol - Amendment 1Publication
BS ISO 22646:2005/Amd 1 Space data and information transfer systems - Space packet protocol - Amendment 1Publication
BS ISO 22663 Space data and information transfer systems - Proximity-1 space link protocol - Data link layerApproval
BS ISO 22666:2007/Amd 1 Space data and information transfer systems - AOS (advanced orbiting systems) space data link protocol - Amendment 1Publication
BS ISO 22900-2 Road vehicles - Modular vehicle communication interface (MVCI) Part 2: Diagnostic protocol data unit application programming interface (D-PDU API)Public Comment
BS ISO 22901-3 Road vehicles - Open diagnostic data exchange (ODX) - Part 3: Fault symptom exchange description (FXD)Public Comment
BS ISO 22915-1 Industrial trucks - Verification of stability Part 1: GeneralApproval
BS ISO 22915-24 Industrial trucks - Verification of stability Part 24: Slewing variable-reach trucksPublication
BS ISO 23038 Space systems - Space solar cells - Electron and proton irradiation test methodsAccepted
BS ISO 23500-1 Guidance for the preparation and quality management of fluids for haemodialysis and related therapiesAccepted
BS ISO 23500-2 Guidance for the preparation and quality management of fluids for haemodialysis and related therapies Part 2: Water treatment equipment for haemodialysis applications and related therapiesAccepted
BS ISO 23500-3 Guidance for the preparation and quality management of fluids for haemodialysis and related therapies Part 3: Water for haemodialysis and related therapiesAccepted
BS ISO 23500-4 Guidance for the preparation and quality management of fluids for haemodialysis and related therapies Part 4: Concentrates for haemodialysis and related therapiesAccepted
BS ISO 23500-5 Guidance for the preparation and quality management of fluids for haemodialysis and related therapies Part 5: Quality of dialysis fluid for haemodialysis and related therapiesAccepted
BS ISO 23551-2 Safety and control devices for gas burners and gas-burning appliances Particular requirements - Part 2: Pressure regulatorsAccepted
Opens a new windowBS ISO 23551-8 Safety and control devices for gas burners and gas burning appliances Particular Requirements - Part 8: Multifunctional controlsPublic Comment
BS ISO 23551-9 Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 9: Mechanical gas thermostatsPublication
BS ISO 25119-1 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems Part 1: General principles for design and developmentAccepted
BS ISO 25119-2 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems Part 2: Concept phaseAccepted
BS ISO 25119-3 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems Part 3: Series development, hardware and softwareAccepted
BS ISO 25119-4 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems Part 4: Production, operation, modification and supporting processesAccepted
BS ISO 27145-4 Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements Part 4: Connection between vehicle and test equipmentPublic Comment
BS ISO 3767-1 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays Part 1: Common symbolsPublic Comment
BS ISO 3767-2 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays Part 2: Symbols for agricultural tractors and machineryPublic Comment
BS ISO 3862 Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids - SpecificationApproval
BS ISO 4079 Rubber hoses and hose assemblies - Textile-reinforced hydraulic types for oil-based or water-based fluids - SpecificationApproval
BS ISO 4642-1 Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 1: Semi-rigid hoses for fixed systemsApproval
BS ISO 4642-2 Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehiclesApproval
BS ISO 5006 Earth-moving machinery - Operator's field of view - Test method and performance criteriaIdea
BS ISO 5010 Earth-moving machinery - Wheeled machines - Steering requirementsIdea
BS ISO 5053-1 Powered industrial trucks - Terminology Part 1: Types of industrial truckPublication
BS ISO 5131 Tractors for agriculture and forestry - Measurement of noise ate the operator's position - Survey methodPublication
BS ISO 5772 Rubber hoses and hose assemblies for measured fuel dispensing - SpecificationApproval
BS ISO 5910 Cardiovascular implants and extracoporeal systems - Cardiac valve repair devicesAccepted
BS ISO 6372 Nickel and nickel alloys - Terms and definitionsAccepted
BS ISO 6405-1 Earth-moving machinery - Symbols for operator controls and other displays Part 1: Common symbolsPublic Comment
BS ISO 6405-2 Earth-moving machinery - Symbols for operator controls and other displays Part 2: Specific symbols for machines, equipment and accessoriesPublic Comment
BS ISO 6501 Ferronickel - Specification and delivery requirementsAccepted
BS ISO 6804 Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers - SpecificationPublic Comment
BS ISO 7132:2003/Amd 1 Earth-moving machinery - Dumpers - Terminology and commercial specifications - Amendment 1Accepted
BS ISO 7176-19:2008/AMD 1 Wheelchairs Part 19: Wheeled mobility devices for use as seats in motor vehicles - Amendment 1: .Publication
BS ISO 7176-2 Wheelchairs Part 2: Determination of dynamic stability of electric wheelchairsAccepted
BS ISO 7176-30 Posture change type wheelchairs - test methodsAccepted
BS ISO 7216 Acoustics - Agricultural and forestry wheeled tractors and self-propelled machines - Measurement of noise emitted when in motionPublication
BS ISO 7524 Nickel, ferronickel and nickel alloys - Determination of carbon content - Infra-red absorption method after induction furnace combustionIdea
BS ISO 7526 Nickel, ferronickel and nickel alloys - Determination of sulfur content - Infra-red absorption method after induction furnace combustionIdea
BS ISO 7637-3 Road vehicles - Electrical disturbance by conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply linesPublic Comment
BS ISO 789-1 Agricultural tractors - Test procedures Part 1: Power tests for power take-offAccepted
BS ISO 789-13 Agricultural tractors - Test procedures Part 13: Terms and definitionsAccepted
BS ISO 789-2 Agricultural tractors - Test procedures Part 2: Rear three-point linkage lifting capacityAccepted
BS ISO 789-3 Agricultural tractors - Test procedures Part 3: Turning and clearance diametersPublication
BS ISO 789-9 Agricultural tractors - Test procedures Part 9: Power tests for drawbarAccepted
BS ISO 8216-1 Petroleum products - Fuels (class F) classification Part 1: Categories of marine fuelsAccepted
BS ISO 8217 Petroleum products - Fuels (class F) - Specifications of marine fuelsAccepted
BS ISO 8643 Earth-moving machinery - Hydraulic excavator and backhoe loader boom-lowering control device - Requirements and testsPublic Comment
Opens a new windowBS ISO 8789 Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles - SpecificationPublic Comment
BS ISO 8812 Earth-moving machinery - Backhoe loaders - Definitions and commercial specificationsPublication
BS ISO 8820-3 Road vehicles - Fuse links - Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)Approval
BS ISO 8820-4 Road vehicles - Fuse-links - Part 4:Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures.Accepted
BS ISO 9244:2008/Amd 1 Earth-moving machinery - Machine safety labels - General principles - Amendment 1Public Comment
BS ISO 9725 Nickel and nickel alloy forgingsAccepted
BS ISO TS 11708 Non metallic material qualification for use in earth moving machinery - Operator protective structuresAccepted
BS ISO/IEC 11801-3 Information technology - Generic cabling for customer premises Part 3: Industrial premisesAccepted
BS ISO/IEC 11801-4 Information technology - Generic cabling for customer premises Part 4: HomesAccepted
BS ISO/IEC 11801-5 Information technology - Generic cabling for customer premises Part 5: Data centresAccepted
BS ISO/IEC 15118-4 Road vehicles - Vehicle to grid communication interface - Part 4: Network and application protocol conformance test.Accepted
BS ISO/IEC 15118-5 Road vehicles - Vehicle to grid communication interface - Part 5: Physical and data link layer conformance tests.Accepted
BS ISO/IEC 15118-6 interface Part 6: General information and use-case definition for wireless communicationPublic Comment
BS ISO/TS 18223 Nickel alloys - Determination of Nickel content - Inductively coupled plasma atomic emission spectrometric methodAccepted
BS ISO11783-5:2011/CORR Tractors and machinery for agriculture and forestry — Serial control andcommunications data network Part 5: Network managementPublication
BS ISO3767-2:2008/CORR Tractors, machinery for agriculture and forestry, powered lawn andgarden equipment — Symbols for operator controls and other displays Part 2: Symbols for agricultural tractors and machineryPublication
PD 855468 Guide to flushing and disinfectionApproval
PD CEN/TR 1459-6 - Rough-terrain trucks - Risk assessment methodology and control system performance level determinationApproval
PD CEN/TS 115-4 Safety of escalators and moving walks — Part 4: Interpretations related to EN 115 family of standardsApproval
PD CISPR/TR 16-3:2010/A2 disturbance and immunity measuring apparatus and methods - Part 3: CISPR technical reportsPublication
PD CISPR/TR 16-4-4/Am 1 Ed. 2.0 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio servicesAccepted
PD CISPR/TR 18-1 Ed. 3.0 Radio interference characteristics of overhead power lines and high-voltage equipment - Part 1: Description of phenomenaAccepted
PD CISPR/TR 18-2 Ed. 3.0 Radio interference characteristics of overhead power lines and high-voltage equipment - Part 2: Methods of measurement and procedure for determining limitsAccepted
PD CISPR/TR 18-3 Ed. 3.0 Radio interference characteristics of overhead power lines and high-voltage equipment - Part 3: Code of practice for minimizing the generation of radio noiseAccepted
PD CLC/ETSI/TR 103288 Radio spectrum Matters (ERM); Reportof the CENELEC/ETSI Joint Working Group in response to the EC letter ENTRP/F5/DP/MM/entr.f5.(2013)43164 to the ESOsAccepted
PD CLC/TR 50542-2 Railway applications - Driver's cab Train Display Controller (TDC) Part 2: Display systems FISApproval
PD CLC/TR 50542-3 Train Display Controller (TDC) Part 3: Other train systems FISApproval
PD CLC/TR 50607-10 Satellite signal distribution over a single coaxial cable - Part 10: Implementation guidelineApproval
PD CLC/TR 50627 Study Report on Electromagnetic Interference between Electrical Equipment/Systems in the Frequency Range Below 150 kHz Ed. 2Publication
PD CLC/TR 50646 Railway applications - Fixed Installations - Specification for reversible d.c. substationsApproval
PD CLC/TR 50XXX Railway applications - Specification for reversible direct current substationsIdea
PD CLC/TS 62896 Hybrid insulators for a.c. and d.c. applications with voltage greater than 1 000 V-- Definitions, test methods and acceptancecriteriaPublication
PD IEC/TR 60513 Fundamental aspects of safety standards for medical electrical equipmentAccepted
PD IEC/TR 60601-4-1 Ed 1.0 Medical electrical equipment Part 4-1: Guidance and interpretation - Medical electrical equipment and medical electrical systems employing a degree of autonomyAccepted
PD IEC/TR 60601-4-1 Ed.1 Medical electrical equipment Part 4-1: Guidance and interpretation - Medical electrical equipment and medical electrical systems employing a degree of autonomyIdea
PD IEC/TR 60601-4-2 Ed 1.0 Medical electrical equipment Part 4-2: Guidance and interpretation - Electromagnetic immunity; performance of medical electrical equipment and medical electrical systemsAccepted
PD IEC/TR 60919-3:2009/A1 Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 3: Dynamic conditionsPublication
PD IEC/TR 61000-1-7 Ed 1.0 Electromagnetic compatibility (EMC) Part 1-7: General - Power factor in single phase systems under non-sinusoidal conditionsAccepted
PD IEC/TR 61000-4-1 Ed1.0 Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of the IEC 61000-4 seriesApproval
PD IEC/TR 61000-4-38 Electromagnetic Compatibility (EMC) - Testing and measurement techniques- Calibration and Verification Protocol for Flicker Compliance test systems Part 1: General requirements and methods of testPublication
PD IEC/TR 61156-1-6 Ed1.0 pair/quad cables for digital communications Part 1-6: Exploratory DC-resistance values of floor-wiring and work-area cables for digital communicationsAccepted
PD IEC/TR 61916 Ed 3.0/A1 Electrical accessories - Harmonization of general rulesIdea
PD IEC/TR 61998 Ed. 1 Model and framework for standardization in multimedia equipment andsystemsApproval
PD IEC/TR 62001-1 Ed1.0 High-voltage direct current (HVDC) systems - Guidebook to the specification and design evaluation of A.C. filters - Part 1: OverviewPublication
PD IEC/TR 62001-2 High-voltage direct current (HVDC) systems - Guidebook to thespecification and design evaluation of A.C. filters - Part 2: PerformanceAccepted
PD IEC/TR 62001-3 Ed 1.0 High-voltage direct current (HVDC) systems - Guidebook to thespecification and design evaluation of AC filters - Part 3: ModellingAccepted
PD IEC/TR 62001-4 Ed1.0 High-voltage direct current (HVDC) systems - Guidebook to the specification and design evaluation of A.C. filters - Part 4: EquipmentPublication
PD IEC/TR 62153-4-16 Ed1.0 METALLIC COMMUNICATION CABLE TEST METHODS Part 4-16: Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-upApproval
PD IEC/TR 62366-2 Medical devices Part 2: Guidance on the application of usability engineering to medical devicesApproval
PD IEC/TR 62544:2011/A1 High-voltage direct current (HVDC) systems - Application of activefiltersPublication
PD IEC/TR 63020 Ed. 1.0 MULTIMEDIA E-PUBLISHING AND E-BOOK TECHNOLOGIES - DIGITAL SHEET MUSIC -MARKET, USE CASES, AND RELATED TECHNOLOGIESApproval
PD IEC/TR 63022 Ed. 1.0 Model Universals – Specification and ExamplesApproval
PD IEC/TR 80001-2-8 Ed 1.0 Application of risk management for IT-networks incorporating medical devices Part 2-8: Application guidance - Guidance on standards for establishing the security capabilities identified in IEC 80001-2-2Approval
PD IEC/TS 60815-4 ED 1.0 Selection and dimensioning of high-voltage insulators intended for usein polluted conditions - Part 4: Insulators for d.c. systemsAccepted
PD IEC/TS 61400-26-2 Wind turbines Part 26-2: Production-based availability for wind turbinesPublication
PD IEC/TS 61400-3-2 Ed 1.0 Wind turbines Part 3-2: Design requirements for floating offshore wind turbinesAccepted
PD IEC/TS 61463 Ed2.0 Bushings-Seismic QualificationApproval
PD IEC/TS 61508-3-1 Ed1.0 Functional safety ofelectrical/electronic/programmable electronic safety related systems - Part 3-1: Software requirements - Reuse of pre-existing software elements to implement all or part of a safety functionAccepted
PD IEC/TS 62040-4-1 Ed 1.0 Uninterruptible power systems (UPS) - Part 4-1: Environmental aspects - Product category rules (PCR) for life cycle assessmentAccepted
PD IEC/TS 62073 Guidance on the measurement of hydrophobicity of insulator surfaces Part 2: Faults and switchingPublication
PD IEC/TS 62153-4-1 Metallic communication cable test methods Part 4-1: Introduction to Electromagnetic (EMC) Test MethodsPublication
PD IEC/TS 62436 Ed.1/A1 Guideline for implementation of copy controlled multimedia interface(TA4)Approval
PD IEC/TS 62443-1-3 Industrial communication networks - Network and system security Part 1-3: System security compliance metricsPublic Comment
PD IEC/TS 62702-2 Audio Archive System Part 2: Audio data preservationPublication
PD IEC/TS 62735-1 D.C. plugs and socket-outlets for ICT equipment installed in data centres and telecom central officesPublication
PD IEC/TS 62832-1 Ed. 1.0 Industrial-process measurement, control and automation – Digital Factoryframework – Part 1: General principlesAccepted
PD IEC/TS 62871-1 Ed 1.0 Professional video storage products - Tape less camera recorder using MXF file format - Encoding guidelines Part 1: MXF Operational Pattern (TA6)Publication
PD IEC/TS 62872 Industrial process measurement, control and automation - System interface between Industrial Facilities and the Smart GridPublication
PD IEC/TS 62886 Ed1.0 measuring electroacoustic performance up to 16 kHzAccepted
PD ISO/IEC/TR 11801-9903 Information technology - Generic cabling for customer premises Part 9903: Modelling of channels and links for balanced cablingApproval
PD ISO/PAS 19451-1 Application of ISO 26262:2011-2012 to SemiconductorsIdea
PD ISO/TR 14799-1 Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparisonPublication
PD ISO/TR 14799-2 Comparison of worldwide escalator and moving walk safety standards Part 2: Abbreviated comparison and commentsApproval
PD ISO/TR 17987-5 Road vehicles - Local Interconnect Network (LIN) Part 5: Application programmers interface (API)Accepted
PD ISO/TR 18146 Space systems - Design and operation manual for spacecraft operated in the debris environmentPublication
PD ISO/TR 19024 Evaluation of CPB devices relative to their capabilities of reducing the transmission of Gaseous MicroEmboli(GME)to a patient during cardiopulmonary bypassPublication
PD ISO/TR 19473 Space systems - Best practices for orbit elements at payload - LV separationPublication
PD ISO/TR 19948 Conformity Assessment and Certification Process for Earth-moving MachineryIdea
PD ISO/TR 22201-3 Lifts (elevators), escalators and moving walks - Programmable electronic systems in safety related applications Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAEAccepted
PD ISO/TR 22559-5 Safety requirements for lifts (elevators) Part 5: Convergence of lift requirementsAccepted
PD ISO/TR 80002-2 Medical device software Part 2: Validation of software for regulated processesAccepted
PD ISO/TS 16688 Guideline for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applicationsAccepted
PD ISO/TS 17306 Petroleum products - Biodiesel - Determination of free and totalglycerin and mono-, di- and tracylglycerols by gas chromatographyAccepted
PD ISO/TS 17307 Petroleum products - Biodiesel - Determination of total esters content by gas chromatographyAccepted
PD ISO/TS 22559-2 Safety requirements for lifts (elevators) Part 2: Safety parameters meeting the global essential safety requirements (GESRs)Accepted

[ back to top ]

Published standards (155)

Sort by: Reference | Title | Status

Standard referenceNameStatus
PD 1001:1996A guide to electromagnetic compatibility and structured cablingWithdrawn
BS ISO 14117:2012Active implantable medical devices. Electromagnetic compatibility. EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devicesCurrent
BS EN 61800-3:2004+A1:2012Adjustable speed electrical power drive systems - EMC requirements and specific test methods Current, Work in Hand
BS EN 61800-3:1997Adjustable speed electrical power drive systems - EMC product standard including specific test methodsWithdrawn
BS ISO 14302:2002Aerospace series. Space systems. Electromagnetic compatibility requirementsCurrent
BS EN ISO 14982:2009Agricultural and forestry machinery. Electromagnetic compatibility. Test methods and acceptance criteriaCurrent
BS EN ISO 14982:1998Agricultural and forestry machinery. Electromagnetic compatibility. Test methods and acceptance criteriaWithdrawn
BS EN 50147-2:1997Anechoic chambers - Alternative test site suitability with respect to site attenuationWithdrawn
BS EN 50147-1:1997Anechoic chambers - Shield attenuation measurementCurrent
BS EN 50310:2010Application of equipotential bonding and earthing in buildings with information technology equipmentCurrent
BS EN 50310:2006Application of equipotential bonding and earthing in buildings with information technology equipmentWithdrawn
BS EN 50413:2008+A1:2013Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz - 300 GHz)Current
BS EN 50083-2:2006Cable networks for television signals, sound signals and interactive services - Electromagnetic compatibility for equipmentWithdrawn
BS EN 50083-2:2012Cable networks for television signals, sound signals and interactive services - Electromagnetic compatibility for equipment Current, Work in Hand
BS EN 50083-8:2002+A11:2008Cable networks for television signals, sound signals and interactive services - Electromagnetic compatibility for networksWithdrawn
PD CLC/TR 50083-2-2:2014Cable networks for television signals, sound signals and interactive services - Interference issues for DVB-T reception in the presence of LTE base station signalsCurrent
BS EN 50083-8:2013Cable networks for television signals, sound signals and interactive services - Electromagnetic compatibility for networksCurrent
BS EN 50083-2:1995Cabled distribution systems for television and sound signals - Electromagnetic compatibility for equipmentWithdrawn
BS EN 50083-2:2001Cabled distribution systems for television and sound signals - Electromagnetic compatibility for equipmentWithdrawn
PD IEC/TR 60725:2012Consideration of reference impedances and public supply network impedances for use in determining disturbance characteristics of electrical equipment having a rated current = 75 A per phaseCurrent
BS EN 619:2002+A1:2010Continuous handling equipment and systems. Safety and EMC requirements for equipment for mechanical handling of unit loadsCurrent
BS G 257-2:1998Design of electromagnetic hazard protection of civil aircraft - Guide to protectionCurrent
BS G 257-1:1998Design of electromagnetic hazard protection of civil aircraft - Guide to theory and threatsCurrent
BS G 257-3:2004Design of electromagnetic hazard protection of civil aircraft - Guide to clearance and testingCurrent
BS 5406-1:1988Disturbances in supply systems caused by household appliances and similar electrical equipment - Glossary of termsWithdrawn
BS EN 50443:2011Effects of electromagnetic interference on pipelines caused by high voltage a.c. electric traction systems and/or high voltage a.c. power supply systemsCurrent
BS IEC 60533:1999Electrical and electronic installations in ships. Electromagnetic compatibilityCurrent, Work in Hand
BS EN 61326-2-2:2006Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements. Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systemsCurrent
BS EN 61326-2-4:2006Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices, according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9Withdrawn
BS EN 61326:1998Electrical equipment for measurement, control and laboratory use. EMC requirementsWithdrawn
BS EN 61326-2-2:2013Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements. Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systemsCurrent
BS EN 61326-2-3:2013Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements. Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioningCurrent
BS EN 61326-2-4:2013Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements. Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9Current
BS EN 61326-2-5:2013Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements. Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1Current
BS EN 61326-2-6:2013Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements. In vitro diagnostic (IVD) medical equipmentCurrent
BS EN 61326-2-6:2006Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements. In vitro diagnostic (IVD) medical equipmentCurrent
BS EN 61326-1:2013Electrical equipment for measurement, control and laboratory use. EMC requirements - General requirementsCurrent
BS EN 61326-2-1:2013Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements. Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applicationsCurrent
BS EN 61326-1:2006Electrical equipment for measurement, control and laboratory use. EMC requirements - General requirementsWithdrawn
BS EN 61326-2-1:2006Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements. Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applicationsCurrent
BS EN 61326-2-3:2006Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning Withdrawn
BS EN 61326-2-5:2006Electrical equipment for measurement, control and laboratory use. EMC requirements - Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2Current
PD IEC/TR 61000-1-6:2012Electromagnetic compatibility (EMC) - General. Guide to the assessment of measurement uncertaintyCurrent
BS EN 61000-4-25:2002+A1:2012Electromagnetic compatibility (EMC) - Testing and measurement techniques. HEMP immunity test methods for equipment and systemsCurrent
BS EN 61000-4-7:1993Electromagnetic compatibility (EMC) - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected theretoWithdrawn
PD IEC/TR 61000-2-14:2006Electromagnetic compatibility (EMC) - Environment. Overvoltages on public electricity distribution networksCurrent
BS EN 61000-4-1:2007Electromagnetic compatibility (EMC) - Testing and measurement techniques. Overview of IEC 61000-4 seriesCurrent
BS EN 61000-2-4:2002Electromagnetic compatibility (EMC). Environment - Compatibility levels in industrial plants for low-frequency conducted disturbancesCurrent
BS EN 61000-2-10:1999Electromagnetic compatibility (EMC). Environment - Description of HEMP environment. Conducted disturbanceCurrent
BS EN 61000-2-12:2003Electromagnetic compatibility (EMC). Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systemsCurrent
BS EN 61000-2-4:1995Electromagnetic compatibility (EMC). Environment - Compatibility levels in industrial plants for low-frequency conducted disturbancesWithdrawn
BS IEC 1000-2-5:1995Electromagnetic compatibility (EMC). Environment - Classification of electromagnetic environments. Basic EMC publicationCurrent
BS EN 61000-2-9:1996Electromagnetic compatibility (EMC). Environment - Description of HEMP environment. Radiated disturbance. Basic EMC publicationCurrent
BS IEC 61000-2-7:1998Electromagnetic compatibility (EMC). Environment - Low frequency magnetic fields in various environmentsCurrent
DD IEC TS 61000-1-2:2001Electromagnetic compatibility (EMC). General - Methodology for the achievement of the functional safety of electrical and electronic equipment with regard to electromagnetic phenomenaWithdrawn
PD 6582:1993Electromagnetic compatibility (EMC). Guide to generic EMC standardsCurrent
PD IEC TR 61000-5-6:2002Electromagnetic compatibility (EMC). Installation and mitigation guidelines - Mitigation of external EM influencesCurrent
BS IEC 61000-5-2:1997Electromagnetic compatibility (EMC). Installation and mitigation guidelines - Earthing and cablingCurrent
BS IEC 61000-5-1:1996Electromagnetic compatibility (EMC). Installation and mitigation guidelines - General considerations. Basic EMC publicationCurrent
BS EN 61000-5-5:1996Electromagnetic compatibility (EMC). Installation and mitigation guidelines - Specification of protective devices for HEMP conducted disturbance. Basic EMC publicationCurrent
BS EN 50498:2010Electromagnetic compatibility (EMC). Product family standard for aftermarket electronic equipment in vehiclesCurrent
BS EN 50199:1996Electromagnetic compatibility (EMC). Product standard for arc welding equipmentWithdrawn
BS EN 50263:2000Electromagnetic compatibility (EMC). Product standard for measuring relays and protection equipmentWithdrawn
BS EN 61000-4-24:1997Electromagnetic compatibility (EMC). Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance. Basic EMC publicationCurrent, Work in Hand
BS EN 61000-4-30:2003Electromagnetic compatibility (EMC). Testing and measurement techniques - Power quality measurement methodsWithdrawn
BS EN 61000-4-15:1998Electromagnetic compatibility (EMC). Testing and measurement techniques - Flickermeter. Functional and design specifications. Basic EMC publicationWithdrawn
BS 6667-1:1985Electromagnetic compatibility for industrial-process measurement and control equipment - General introductionWithdrawn
BS 6667-3:1985Electromagnetic compatibility for industrial-process measurement and control equipment - Method of evaluating susceptibility to radiated electromagnetic energyWithdrawn
BS EN 55014-2:2015Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus - Immunity. Product family standardCurrent
BS EN 50293:2001Electromagnetic compatibility. Road traffic signal systems. Product standardWithdrawn
BS EN 50240:2004Electromagnetic compatibilty (EMC). Product standard for resistance welding equipmentWithdrawn
BS EN 50357:2001Evaluation of human exposure to electromagnetic fields from devices used in electronic article surveillance (EAS), radio frequency identification (RFID) and similar applicationsWithdrawn
BS EN 62369-1:2009Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz - Fields produced by devices used for electronic article surveillance, radio frequency identification and similar systemsCurrent
BS EN 60938-1:2000Fixed inductors for electromagnetic interference suppression - Generic specificationCurrent
BS EN 60938-2:2000Fixed inductors for electromagnetic interference suppression - Sectional specificationCurrent
BS EN 60938-2-1:2000Fixed inductors for electromagnetic interference suppression - Blank detail specification. Inductors for which safety tests are required. Assessment level D - Blank detail specification: Fixed inductors for electromagnetic interference suppression for which electrical shock hazard protection tests are required. Assessment level DCurrent
BS 4727-1:Group 09:1991Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics - Electromagnetic compatibilityWithdrawn
BS EN 60940:2015Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppressionCurrent
PD R210-008:2002Guide to EMC conformity of apparatus designed for military and other purposesWithdrawn
PD CLC/TR 50538:2010Guide to EMC Directive conformity of equipment designed for military purposesCurrent
PD CR R106-001:2002Guidelines for product committees on the preparation of standards related to human exposure from electromagnetic fieldsWithdrawn
PD 6591:1996Guidelines on how to use anechoic enclosures that do not fulfil the requirements regarding normalized site attenuation for pre-compliance tests of productsCurrent
BS EN 133201:1998Harmonized system of quality assessment for electronic components. Blank detail specification: passive filter units for electromagnetic interference suppression. Filters for which safety tests are requiredWithdrawn
BS EN 133221:1998Harmonized system of quality assessment for electronic components. Blank detail specification: passive filter units for electromagnetic interference suppression. Filters for which safety tests are required (safety tests only)Withdrawn
BS EN 133101:1998Harmonized system of quality assessment for electronic components. Blank detail specification:passive filter units for electromagnetic interference suppression. Filters for which safety tests are not requiredWithdrawn
BS EN 138000:1997Harmonized system of quality assessment for electronic components. Generic specification: fixed inductors for electromagnetic interference suppression (inductors for which safety tests are required)Withdrawn
BS EN 133000:1997Harmonized system of quality assessment for electronic components. Generic specification: passive filter units for electromagnetic interference suppressionWithdrawn
BS EN 138100:1997Harmonized system of quality assessment for electronic components. Sectional specification: fixed inductors for electromagnetic interference suppression (inductors for which safety tests are required)Withdrawn
BS EN 133100:1998Harmonized system of quality assessment for electronic components. Sectional specification:passive filter units for electromagnetic interference suppression. Filters for which safety tests are not requiredWithdrawn
BS EN 12895:2000Industrial trucks. Electromagnetic compabilityCurrent, Work in Hand
DD ENV 50185-3:1996Infra-red free air application - Measuring conditionsWithdrawn
DD ENV 50185-2:1996Infra-red free air application - ApplicationsWithdrawn
BS EN 61920:1998Infrared transmission systems. Free air applicationsWithdrawn
BS IEC 60050(121):1998International electrotechnical vocabulary - ElectromagnetismCurrent
PD ISO/TR 16764:2003Lifts, escalators and passenger conveyors. Comparison of worldwide standards on electromagnetic interference/electromagnetic compatibilityCurrent
BS EN 50364:2002Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 10 GHz, used in electronic article surveillance (EAS), radio frequency identification (RFID) and similar applicationsWithdrawn
BS EN 50364:2010Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in electronic article surveillance (EAS), radio frequency identification (RFID) and similar applicationsCurrent
BS EN 61204-3:2001Low voltage power supplies, d.c. output - Electromagnetic compatibility (EMC)Current, Work in Hand
BS EN 60601-1-2:2002Medical electrical equipment. General requirements for safety - Collateral standard. Electromagnetic compatibility. Requirements and testsWithdrawn
BS EN 60601-1-2:1993Medical electrical equipment. General requirements for safety - Collateral standard. Electromagnetic compatibility. Requirements and testsWithdrawn
BS IEC 62153-4-3:2013Metallic communication cable test methods - Electromagnetic compatibility (EMC). Surface transfer impedance. Triaxial methodCurrent
PD IEC/TR 62153-4-1:2010Metallic communication cable test methods - Electromagnetic compatibility (EMC). Introduction to electromagnetic (EMC) screening measurementsCurrent, Work in Hand
BS EN 62153-4-2:2004Metallic communication cable test methods - Electromagnetic compatibility. Screening and coupling attenuation. Injection clamp methodCurrent
BS EN 62153-1-1:2004Metallic communication cables test methods - Electrical. Measurement of the pulse/step return loss in the frequency domain using the inverse discrete fourier transformation (IDFT)Current
BS EN 62153-4-7:2006Metallic communication cables test methods - Electromagnetic compatibility (EMC). Test method for measuring the transfer impedance and the screening, or the coupling attenuation. Tube in tube methodCurrent, Work in Hand
BS 6345:1983Method for measurement of radio interference terminal voltage of lighting equipmentWithdrawn
BS EN 55017:2011Methods of measurement of the suppression characteristics of passive EMC filtering devicesCurrent
BS 6299:1982Methods of measurement of the suppression characteristics of passive radio interference filters and suppression componentsWithdrawn
BS EN 62041:2003Power transformers, power supply units, reactors and similar products. EMC requirementsWithdrawn
BS EN 50360:2001+A1:2012Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz - 3 GHz)Current
PD CISPR/TR 18-1:2010Radio interference characteristics of overhead power lines and high- voltage equipment - Description of phenomenaCurrent
BS 5049-3:1994Radio interference characteristics of overhead power lines and high-voltage equipment - Code of practice for minimizing the generation of radio noiseWithdrawn
PD CISPR/TR 18-2:2010Radio interference characteristics of overhead power lines and high-voltage equipment - Methods of measurement and procedure for determining limitsCurrent
PD CISPR/TR 18-3:2010Radio interference characteristics of overhead power lines and high-voltage equipment - Code of practice for minimizing the generation of radio noiseCurrent
BS EN 60437:1998Radio interference test on high-voltage insulatorsCurrent
BS EN 50121-5:2000Railway applications. Electromagnetic compatibility - Emission and immunity of fixed power supply installations and apparatusWithdrawn
BS EN 50121-4:2000Railway applications. Electromagnetic compatibility - Emission and immunity of the signalling and telecommunications apparatusWithdrawn
BS EN 50121-3-2:2000Railway applications. Electromagnetic compatibility - Rolling stock. ApparatusWithdrawn
BS EN 50121-1:2015Railway applications. Electromagnetic compatibility - GeneralCurrent
BS EN 50121-2:2015Railway applications. Electromagnetic compatibility - Emission of the whole railway system to the outside worldCurrent
BS EN 50121-3-2:2015Railway applications. Electromagnetic compatibility - Rolling stock. ApparatusCurrent
BS EN 50121-4:2015Railway applications. Electromagnetic compatibility - Emission and immunity of the signalling and telecommunications apparatusCurrent
BS EN 50121-5:2015Railway applications. Electromagnetic compatibility - Emission and immunity of fixed power supply installations and apparatusCurrent
DD ENV 50121-5:1996Railway applications. Electromagnetic compatibility - Fixed power supply installationsWithdrawn
DD ENV 50121-3-2:1996Railway applications. Electromagnetic compatibility - Rolling stock. ApparatusWithdrawn
DD ENV 50121-3-1:1996Railway applications. Electromagnetic compatibility - Rolling stock. Train and complete vehicleWithdrawn
DD ENV 50121-1:1996Railway applications. Electromagnetic compatibility - GeneralWithdrawn
BS EN 50121-1:2006Railway applications. Electromagnetic compatibility - GeneralWithdrawn
BS EN 50121-2:2006Railway applications. Electromagnetic compatibility - Emissions of the whole railway system to the outside worldWithdrawn
BS EN 50121-3-1:2006Railway applications. Electromagnetic compatibility - Rolling stock. Train and complete vehicleWithdrawn
BS EN 50121-3-2:2006Railway applications. Electromagnetic compatibility - Rolling stock. ApparatusWithdrawn
BS EN 50121-4:2006Railway applications. Electromagnetic compatibility - Emission and immunity of the signalling and telecommunications apparatusWithdrawn
BS EN 50121-5:2006Railway applications. Electromagnetic compatibility - Emission and immunity of fixed power supply installations and apparatusWithdrawn
BS EN 50121-3-1:2015Railway applications. Electromagnetic compatibility - Rolling stock. Train and complete vehicleCurrent
BS EN 50121-3-1:2000Railway applications. Electromagnetic compatibility. - Rolling stock. Train and complete vehicleWithdrawn
BS EN 62135-2:2015Resistance welding equipment - Electromagnetic compatibility (EMC) requirementsCurrent
BS EN 62135-2:2008Resistance welding equipment - Electromagnetic compatibility (EMC) requirementsWithdrawn
PD CLC/TR 50450:2006Resistibility requirements for equipment having (a) telecommunication port(s)Current
BS EN 50293:2012Road traffic signal systems. Electromagnetic compatibilityCurrent
PD ISO/TS 21609:2014Road vehicles. (EMC) guidelines for installation of aftermarket radio frequency transmitting equipmentCurrent
BS EN 14010:2003+A1:2009Safety of machinery. Equipment for power driven parking of motor vehicles. Safety and EMC requirements for design, manufacturing, erection and commissioning stagesCurrent
BS EN 62041:2010Safety of transformers, reactors, power supply units and combinations thereof. EMC requirementsCurrent, Work in Hand
BS EN 50065-1:2011Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - General requirements, frequency bands and electromagnetic disturbancesCurrent
BS EN 50065-1:2001+A1:2010Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - General requirements, frequency bands and electromagnetic disturbancesWithdrawn
BS EN 50065-2-3:2003Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 Khz - Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributorsCurrent
BS EN 50065-1:1992Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz - General requirements, frequency bands and electromagnetic disturbancesWithdrawn
BS 5394:1988Specification for limits and methods of measurement of radio interference characteristics of fluorescent lamps and luminairesWithdrawn
BS 6527:1988Specification for limits and methods of measurement of radio interference characteristics of information technology equipmentWithdrawn
BS CISPR 16-3:2000Specification for radio disturbance and immunity measuring apparatus and methods - Reports and recommendations of CISPRWithdrawn
BS 727:1983Specification for radio-interference measuring apparatusWithdrawn
BS EN 50091-2:1996Specification for uninterruptible power systems (UPS) - EMC requirementsWithdrawn
BS EN 62310-2:2007Static transfer systems (STS) - Electromagnetic compatibility (EMC) requirementsCurrent
BS EN 62040-2:2006Uninterruptible power systems (UPS) - Electromagnetic compatibility (EMC) requirementsCurrent, Work in Hand
BS ISO 7176-21:2003Wheelchairs - Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scootersWithdrawn
BS ISO 7176-21:2009Wheelchairs - Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargersCurrent

[ back to top ]

Committees (48)

Sort by: Reference | Name

Committee ReferenceTitle
ACE/66Aerospace electromagnetic compatibility
ACE/68Space systems and operations
AGE/6Agricultural tractors and forestry machinery
AUE/16Data Communication (Road Vehicles)
B/513/1Earth moving machinery (International)
CH/150/2Cardiovascular implants
CH/173/1Wheelchairs
CH/62/1Common aspects of Electrical Equipment used in Medical Practice
CPL/61Safety of household and similar electrical appliances
EH/3Water quality
EPL/100Audio, video and multimedia systems and equipment
EPL/100/4Cable distribution equipment and systems
EPL/29Electroacoustics
EPL/40XCapacitors and resistors for electronic equipment
EPL/46Cables, wires and waveguides, radio frequency connectors and accessories for communication and signalling
EPL/526Road traffic control signals
GEL/1Electrotechnical Terminology
GEL/106Human exposure to low frequency and high frequency electromagnetic radiation
GEL/210EMC - Policy committee
GEL/210/11EMC product standards
GEL/65Measurement and control
GEL/65/1System considerations
GEL/9Railway Electrotechnical Applications
GEL/9/2Railway Electrotechnical Applications - Rolling stock
GEL/9/3Railway Electrotechnical Applications - Fixed Equipment
GSE/22Safety and control devices for gas and oil burners and gas burning appliances
I/-Miscellaneous standards materials and chemicals
JPEL/18Electrical installations of ships and of mobile and fixed offshore units
L/-/99Miscellaneous Standards - Electrical
MHE/12Lifting Platforms
MHE/4Lifts, hoists and escalators
MHE/7Industrial trucks
MHE/9Continuous mechanical handling equipment
NFE/35Light metals and their alloys
PEL/205Mains signalling
PEL/21Secondary cells and batteries
PEL/22Power electronics
PEL/23Electrical accessories
PEL/36Insulators for power systems
PEL/88Wind turbines
PEL/95Measuring relays and protection systems
PEL/96Small transformers
PRI/66Rubber and plastics tubing, hoses and hose assemblies
PTI/2Liquid Fuels
TCT/-Telecommunications Sector Assembly
TCT/7Telecommunications - Installation requirements
WEE/29Resistance welding
WEE/6Electric arc welding equipment

[ back to top ]

Recently Viewed
Need Help?

We are here to help you with any queries. Email us for help.

But first, why not view the Help Pages?