BSI Corporate | Contact Us | Site Map | Help

Lines, connections & circuits

Parent Category: Telecommunication systems

Standards in development (290)
Published standards (39)
Committees (12)

Standards in development (290)

Standard Title	Status
BS 6259 Code of practice for the design, planning, installation, testing and mai ntenance of sound systems	Public Comment
BS 7856 Code of practice for special design and other features of alternating current watthour meters for active energy (MID Accuracy classes A and B) for use in the UK	Public Comment
BS EN 10223-3 Steel wire and wire products for fences Part 3: Hexagonal steel wire netting for engineering purposes	Approval
BS EN 10223-8 Steel wire and wire products for fences Part 8: Welded mesh gabion products	Approval
BS EN 13600 Copper and copper alloys - Seamless copper tubes for electrical purposes	Approval
BS EN 13601 Copper and copper alloys - Copper rod, bar and wire for general electrical purposes	Approval
BS EN 13604 Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper	Approval
BS EN 13605 Copper and copper alloys - Copper profiles and profiled wire for electrical purposes	Approval
BS EN 50117-1:2002/A + A2 Coaxial cables Part 1: General specification	Approval
BS EN 50117-2-1:2005/A + A2 Coaxial cables Part 2-1: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 1000 MHz	Approval
BS EN 50117-2-2:2004/A + A2 Coaxial cables Part 2-2: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 1000 MHz	Approval
BS EN 50117-2-3:2004/AC + A2 Coaxial cables Part 2-3: Sectional specification for cables used in cabled distribution networks - Distribution and trunk cables for systems operating at 5 MHz - 1000 MHz	Approval
BS EN 50117-2-4:2004/A + A2 Coaxial cables Part 2-4: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 3000 MHz	Approval
BS EN 50117-2-5:2004/A + A1 Coaxial cables - Part 2-5: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 3000 MHz	Approval
BS EN 50117-4-1:2008/AA + A1 Coaxial cables Part 4-1: Sectional specification for cables used in cabled for BCT cabling in accordance with EN 50173 - Indoor drop cables for systems operating at 5 MHz - 3000 MHz	Approval
BS EN 50173-6 Information technology - Generic cabling systems Part 6: Distributed building services	Approval
BS EN 50174-2:2009/A+A2 Information technology - Cabling installation Part 2: Installation planning and practices inside buildings	Accepted
BS EN 50174-3X Information technology - Cabling installation Part 3: Installation planning and practices outside buildings	Public Comment
BS EN 50288-1 Multi-element metallic cables used in analouge and digital communication and control - Part 1: Generic specification	Approval
BS EN 50288-10-2 Multi-element metallic cables used in analogue and digital communication and control Part 10-2: Sectional specification for screened cables characterized up to 500 MHz - Work area and patch cord cables	Idea
BS EN 50288-11-2 Multi-element metallic cables used in analogue and digital communication and control - Part 11-2: Blank detail speification .for horizontal, building backbone and patch cables - For industrial or environmental demanding areas	Idea
BS EN 50288-2-1 Multi-element metallic cables used in analouge and digital communication and control - Part 2-1: Sectional specification for screened cables characterised up to 100 MHz - Horizontal and building backbone cables	Approval
BS EN 50288-2-2 Multi-element metallic cables used in analouge and digital communication and control - Part 2-2: Sectional specification for screened cables characterised from 1 MHz up to 100 MHz - Work area, patch cord and data centres cables	Approval
BS EN 50288-3-1 Multi-element metallic cables used in analouge and digital communication and control - Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables	Approval
BS EN 50288-3-2 Multi-element metallic cables used in analouge and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables	Approval
BS EN 50288-4-1 Multi-element metallic cables used in analouge and digital communication and control - Part 4-1: Sectional specification for screened cables characterised up to 600 MHz - Horizontal and building backbone cables	Approval
BS EN 50288-4-2 Multi-element metallic cables used in analouge and digital communication and control - Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables	Approval
BS EN 50288-5-1 Multi-element metallic cables used in analouge and digital communication and control - Part 5-1: Sectional specification for screened cables characterised up to 250 MHz - Horizontal and building backbone cables	Approval
BS EN 50288-5-2 Multi-element metallic cables used in analouge and digital communication and control - Part 5-2: Sectional specification for screened cables characterised up to 250 MHz - Work area and patch cord cables	Approval
BS EN 50288-6-1 Multi-element metallic cables used in analouge and digital communication and control - Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables	Approval
BS EN 50288-6-2 Multi-element metallic cables used in analouge and digital communication and control - Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables	Approval
BS EN 50288-7:2005/COR 1 Multi-element metallic cables used in analogue and digital communicatio n and control. Sectional specification for instrumentation and control cables	null
BS EN 50288-9-2 Multi-element metallic cables used in analogue and digital communication and control Part 9-2: Sectional specification for screened cables characterised up to 1 000 MHz - work area and patch cord cables	Idea
BS EN 50289-3-8 Communication cables - Specifications for test methods Part 3-8: Mechanical test methods - Abrasion resistance of cable sheath markings	Public Comment
BS EN 50290-2-23 Communication cables Part 2-23: Common design rules and construction - PE insulation	Public Comment
BS EN 50290-2-25 Communication cables Part 2-25: Common design rules and construction - Polypropylene insulation compounds	Public Comment
BS EN 50290-4-1 Ed.2 prEN 50290-4-1 ed.2 : Communication cables Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects	Approval
BS EN 50290-4-2 Ed.2 prEN 50290-4-2 ed.2 : Communication cables Part 4-2: General considerations for the use of cables - Guide to use	Approval
BS EN 50377-14-1:2011/A Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 14-1: Cords with IEC 60793-2-50 singlemode category B1.1 and B1.3 fibre for category C	Idea
BS EN 50377-17-1 Type FPFT( factory polished field terminated) simplex connector factory terminated with EN 60793-2-50 category B1.3 fibre and field mounted onto IEC 60793-2-50 category B1.3 or B6a1 or B6a 2 single mode fibre, Category C	Approval
BS EN 50377-4-1 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-1: Type SC-PC duplex terminated on IEC 60793-2 category A 1 a and A l b multimode fibre	Publication
BS EN 50407-2 Multi-pair cables used in high bite rate digital access telecommunication networks Part 2:Indoor multi-pair/quad cables for installation in Multi Dwelling Units shaft supporting universal services, xDSL and applications up to 100 MBits over IP	Public Comment
BS EN 50411-2-10 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications Part 2-10: FTTH distribution closure	Idea
BS EN 50411-3-4 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications Part 3-4 Fibre management system, connectorised wall box for Category G and C	Idea
BS EN 50411-3-5 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications Part 3-5 Wall outlet	Public Comment
BS EN 50411-3-8 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications Part 3-6: Terminal Equipment Box that houses an ENTI and terminal equipment	Idea
BS EN 50516-3-1 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications Part 3-1: Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3	Public Comment
BS EN 50599 Balanced communication cabling in accordance with EN 50173-4 screened straight patch cords and straight work area cords for class D applications ? detail specification	Approval
BS EN 50600-2-1 Electrotechnical Aspect of Telecommunication Equipment	Public Comment
BS EN 50600-2-3 Electrical Aspects of Telecommunication Equipment	Public Comment
BS EN 50600-2-5 Data centre facilities and infrastructures Part 2-5: Security systems	Public Comment
BS EN 50601 Balanced communication cabling in accordance with EN 50173-4 unscreened straight patch cords and straight work area cords for class D applications ? detail specification	Approval
BS EN 50602 Balanced communication cabling in accordance with EN 50173-4 unscreened straight patch cords and straight work area cords for class E applications ? detail specification	Approval
BS EN 50603 Balanced communication cabling in accordance with EN 50173-4 screened straight patch cords and straight work area cords for class E applications ? detail specification	Approval
BS EN 50700 Information technology - Premises distribution access network cabling to support deployment of optical broadband networks	Public Comment
BS EN 50849 Sound systems for emergency purposes	Publication
BS EN 50882-11 Multi-element metalic cables used in analogue and digital communication and control Part 11: Sectional specification for un-screened cables, characterised up to 500 MHz, for horizontal and building backbone wiring	Public Comment
BS EN 60096-0-1 Radio Frequency cables - Part 0-1: Guide to the design of detail specifications - Coaxial cables	Approval
BS EN 60268-3 Ed 4.0 Sound system equipment Part 3: Amplifiers (GMT)	Public Comment
BS EN 60268-4 Ed 5.0 Review report on IEC 60268-4 Ed. 4: Sound system equipment Part 4: Microphones	Public Comment
BS EN 60268-7:2010/C1 Sound system equipment – Part 7: Headphones and earphones	Publication
BS EN 60728-14 IEC 60728-14: Optical return path systems using RFoG technology	Public Comment
BS EN 60869-1 Fibre optic passive power control devices Part 1 : Generic specification	Approval
BS EN 60870-5-104 ED 1.0/A1/A1 Telecontrol equipment and systems Part 5-104: Transmission protocols - Functional enhancements to IEC 60870-5-104	Public Comment
BS EN 60870-6-503 ED 3.0 Telecontrol equipment and systems Telecontrol equipment and systems - Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Services and protocol	Public Comment
BS EN 60870-6-702 ED 2.0 Telecontrol equipment and systems Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Functional profile for providing the TASE.2 application service in end systems	Public Comment
BS EN 60870-6-802 ED 3.0 Telecontrol equipment and systems Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Object models	Public Comment
BS EN 60958-1 Ed 3.0 /A1 Amendment 1 - Digital audio interface -Part 1: General	Public Comment
BS EN 60958-3 Ed 3.0 /A2 Amendment 2 - Digital audio interface Part 3: Consumer applications	Public Comment
BS EN 60966-2-7 ED.1 Radio frequency and coaxial cable assemblies Part 2-7: Detail specification for cable assemblies for radio and TV recievers - Frequency range 0 MHz to 3000 MHz, IEC 61169-47 connectors	Accepted
BS EN 61169-26 Radio-frequency connectors - Part 26: Sectional specification for TNCA series RF coaxial connectors	Approval
BS EN 61169-4 Radio-frequency connectors - Part 4: RF coaxial connectors with inner diameter of outer conductor 16 mm (0.63 in) with screw lock - Characteristic impedance 50 ? (Type 7-16)	Approval
BS EN 61169-42 Radio-frequency connectors - Part 42: Sectional specification for CQN series quick lock RF coaxial connectors	Approval
BS EN 61169-43 ED 1.0 Radio-frequency connectors Part 43: Sectional specification for RBMA Series Blind amting RF coaxil connectors	Approval
BS EN 61169-44 ED.1 Radio-frequency connectors - Part 44: Sectional specification for SMP series RF coaxial connectors	Approval
BS EN 61169-48 Ed.1 Radio-frequency connectors - Part 48: Sectional specification for BMP Series Blind mating R.F. coaxial connectors	Public Comment
BS EN 61169-49 Ed 1.0 Radio-frequency connectors - Part 49: Sectional specification for SMAA series R.F connectors	Public Comment
BS EN 61169-51 Ed.1 Radio-frequency connectors - Part 51: Sectional specifications RF coaxial connectors with inner diameter of outer conductors 13.5 mm with bayonet lock characteristics impedamce 50 Ohm (type QLI)	Public Comment
BS EN 61196-1-119 Coaxial communication cables Part 1-119: RF Power Rating	Idea
BS EN 61196-10 Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polyterafluoroethylene (PTFE) dielectric	Public Comment
BS EN 61196-10-1 Coaxial Communication Cables Part 10-1: Blank detail specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric	Accepted
BS EN 61196-9 ED.1 Coaxial Communication Cables Part 9: Sectional specification for flexible RF Coaxial cables	Public Comment
BS EN 61300-1 ED 1.0 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 1 : General and guidance	Public Comment
BS EN 61300-2-15 Fibre optic interconnecting devices and passive components – Basic test measurement procedures Part 2-15: Tests – Torque strength of coupling mechanism	Public Comment
BS EN 61300-2-21 Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-21: Tests – Composite temperature/humidity cyclic test	null
BS EN 61300-2-28 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures – Part 2-28: Tests – Industrial atmosphere (sulphur dioxide)	Approval
BS EN 61300-2-35 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-35: Tests - Cable nutation	Public Comment
BS EN 61300-2-37 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-37: Tests - Cable bending for fibre optic closures	null
BS EN 61300-2-42 Fibre optic interconnecting devices and passive components - Basic test measurement procedures Part 2-42: Tests – Static side load for strain relief	Public Comment
BS EN 61300-2-43 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-43: Tests - Screen testing of return loss of single mode PC option fibre connectors	null
BS EN 61300-2-44 Fibre optic interconnecting devices and passive components - Basic test measurement procedures Part 2-44: Tests - Flexing of the strain relief of fibre optic devices	Public Comment
BS EN 61300-2-46:2006/COR 1 Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-46: Tests – Damp heat, cyclic	Publication
BS EN 61300-2-52 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-52: Tests - Bending test for cords	Approval
BS EN 61300-2-53 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-53: Test - Degrees of protection provided by fibre optic enclosures (IP Codes 65 and 67)	Accepted
BS EN 61300-2-7 Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-7: Tests – Bending moment	Approval
BS EN 61300-3-13 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-13: Examinations and measurements - Control stability of a fibre optic switch	Accepted
BS EN 61300-3-21 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-21:Examinations and measurements - Switching time	Accepted
BS EN 61300-3-25 Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-25: Examinations and measurements – Concentricity of the ferrules and ferrules with fibre installed	Public Comment
BS EN 61300-3-29 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Measurement techniques for characterising the amplitude of the spectral transfer function of DWDM devices	Public Comment
BS EN 61300-3-35 ED 2.0 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-35: Examinations and measurements – Fibre optic connector endface visual and automated inspection	Accepted
BS EN 61300-3-4 Fibre optic interconnecting devices and passive components - Basic testa nd measurement procedures Part 3-4: Examinations and measurements - Attenuation	Approval
BS EN 61300-3-47 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-47: Examinations and measurements - Endface geometry of PC/APC spherically polished ferrules using interferometry	Public Comment
BS EN 61300-3-48 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-48: Measurement: Spring compression force of the coupling sleeve for rectangular ferrule multi-fibre connectors	Public Comment
BS EN 61300-3-49 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-49: Measurement: Guide pin retention force measurement method forrectangular ferrule multi-fibre connectors	Public Comment
BS EN 61300-3-50 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches	Approval
BS EN 61300-3-51 ED 1.0 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-51: Examinations and measurements - Guide pin withdrawal force measurement method for rectangular ferrule multi-fibre connectors	Accepted
BS EN 61300-3-52 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-52: Measurement -Guide hole and alignment pin deformation constant, CD for 8 degree angled PC rectangle ferrule, single mode fibers	Public Comment
BS EN 61300-3-53 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-53: Examinations and Measurements - Encircled angular flux (EAF) measurement method based on two- dimensional far field data from multimode fibre	Accepted
BS EN 61300-3-9 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-9: Examinations and measurements - Crosstalk	Accepted
BS EN 61300-3-9 Fibre optic interconnecting devices and passive components - Basic testa nd measurement procedures - Part 3-9: Examinations and measurements - Crosstalk	Public Comment
BS EN 61726 ED.2 Cable assemblies, cables, connectors and passive coponents - screening attentuation measurement by the reverberation chamber method	Public Comment
BS EN 61753-031-2 Fibre optic interconnecting devices and passive components - Performance standards Part 031- 2: Non-connectorised single-mode 1×N and 2×N non-wavelength- -selective branching devices for Category C - Controlled environment	Public Comment
BS EN 61753-031-3 Fibre optic interconnecting devices and passive components - Performance standard Part 31-3: Non-connectorised single-mode 1xN and 2xN non-wavelength wavelengthselective branching devices for Category U - Uncontrolled environment	Public Comment
BS EN 61753-031-6 Fibre optic interconnecting devices and passive components - Performance standard Part 031- 6: Non-connectorised single-mode 1×N and 2×N non-wavelength -selective branching devices for Category O - Uncontrolled environment	Public Comment
BS EN 61753-031-6 Fibre optic interconnecting devices and passive components performance standard Part 031-6: Non-connectorised single mode 1xN and 2xN non-wavelength-selective branching devices (NWBD) for Category O - Uncontrolled environment	Public Comment
BS EN 61753-041-2 ED 1.0 Fibre optic interconnecting devices and passive components - Performance standard - Part -041-2: Non-connectorised single-mode FTTx reflector device for Category C - controlled environment	Public Comment
BS EN 61753-042-2 Fibre optic interconnecting devices and passive components - Performance standard Part 042-2: Plug-pigtail-style and Plug-receptacle-style of OTDR reflecting devices for category C - Controlled environments	Accepted
BS EN 61753-051-3 Fibre optic interconnecting devices and passive components performance standard - Part 051-3: Single-mode fibre, plug-style fixed attenuators for Category U - Uncontrolled environment	Approval
BS EN 61753-052-3 Fibre optic interconnecting devices and passive components - Performance standard Part 052-3: Single mode fibre pigtail style fixed attenuator for category U - Uncontrolled environment	Accepted
BS EN 61753-052-6 Fibre optic interconnecting devices and passive components - Performance standard - Part 052-6: Single mode fibre pigtail style fixed attenuator for category O - Outside plant environment	Accepted
BS EN 61753-053-2 Fibre optic interconnecting devices and passive components - Performance standard Part 053-2: Non-connectorised single-mode fibre electrically controlled variable optical attenuator for category C - Controlled environments	Accepted
BS EN 61753-058-2 Fibre optic interconnecting devices and passive components performance standard Part 058-2: Single mode fibre pigtailed style optical power limiter for category C Controlled environment	Approval
BS EN 61753-059-2 Fibre optic interconnecting devices and passive components performance standard - Part 059-2: Single mode fibre plug style optical power limiter for category C - Controlled environment	Approval
BS EN 61753-071-2 Fibre optic interconnecting devices and passive components performance standard - Part 071-2: Non-connectorised single-mode fibre optic 1 x 2 and 2 x 2 spatial switches for category C - Controlled environments	Public Comment
BS EN 61753-081-2 Fibre optic interconnecting devices and passive components - Performance standard Part 081-2: Non-connectorized single-mode fibre optic middle -scale 1 x N DWDM devices for category C - Controlled environments	Accepted
BS EN 61753-082-2 Fibre optic interconnecting devices and passive components performance standard Part 082-2: Pigtailed single-mode fibre optic 1,31/1,55 ?m WWDM Devices category C - Controlled environment	Approval
BS EN 61753-085-2 Fibre optic interconnecting devices and passive components performance standard Part 085-2: Non-connectorised single-mode pigtailed CWDM devices for category C - Controlled environment	Public Comment
BS EN 61753-088-2 Fibre optic interconnecting devices and passive components performance standard Part 088-2: Non-connectorised single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C - Controlled environments	Approval
BS EN 61753-089-2 Fibre optic interconnecting devices and passive components performance standard - Part 089-2: Non-connectorised single-mode bidirectional OTDR monitoring WWDM devices for category C - controlled environment	Public Comment
BS EN 61753-1-3 Fibre optic interconnecting devices and passive components – Performancestandard - Part 1-3: General and guidance for single-mode fibre optic connector andassembly for harsh industrial environment, Category I	Public Comment
BS EN 61753-122-2 Fibre optic interconnecting devices and passive components - Performance standards - Part 122-2: Simplex and duplex cords with multimode fibre and cylindrical ferrule connectors for Category C - Controlled environment	Accepted
BS EN 61753-123-2 Fibre optic interconnecting devices and passive components - Performance standard Part 123-2: Simplex and duplex reference cords with single-mode fibre and cylindrical ferrule connectors	Accepted
BS EN 61753-124-2 Fibre optic interconnecting devices and passive components Part 124-2: Simplex and duplex reference cords with multimode fibre and cylindrical ferrule connectors for Category C - controlled environment	Accepted
BS EN 61754-1 Fibre optic interconnecting devices and passive components – Fibre optic connector interfaces Part 1: General and guidance	Public Comment
BS EN 61754-24-24 Fibre optic connector interfaces Part 24 : Type SC-RJ connector family	Public Comment
BS EN 61754-27 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 27- Type M12-FO connector family	Approval
BS EN 61754-30 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 30:Type CLIK connector series	Public Comment
BS EN 61754-4 Fibre optic interconnecting devices and passive components - - Fibre optic connector interfaces Part 4: Type SC connector family	Approval
BS EN 61754-6 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 6: Type MU connector family	Approval
BS EN 61754-7-1 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces – Part 7-1: Type MPO connector family - Single fibre row	Public Comment
BS EN 61754-7-2 ED 1.0 D Fibre optic interconnecting devices and passive components - Fibre optic interfaces - Part 7-2: Type MPO connector family - double fibre row	Public Comment
BS EN 61755-1 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces Part 1: Optical interfaces for single mode non-dispersion shifted bibres - General and guidance	null
BS EN 61755-1-1 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 1-1: Optical interfaces for 50.0 um multimode fibre - General and g uidance	Accepted
BS EN 61755-2-1 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces Part 2-1: Connection of non-dispersion shifted single mode non-angled physically contacting fibres	null
BS EN 61755-2-2 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 2-2: Connection of non-dispersion shifted single mode angled physically contacting fibres	null
BS EN 61755-2-3 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 2-3: Optical interface standard, 50.0 um multimode, flat end face, physically contacting fibres	Accepted
BS EN 61755-3-1 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces Part 3-1: Connectors with 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrule, non-angled single mode non-dispersion shifted fibres	null
BS EN 61755-3-10 Fibre optic interconnecting devices and passive components - Fibre opticconnector opticalinterfaces - Part 3-10: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical APC ferrule for reference connector, single mode fibre	Accepted
BS EN 61755-3-2 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-2: Connectors with 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrule, angled single mode non-dispersion shifted fibres	null
BS EN 61755-3-31 ED 1.0 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces Part 3-31: Optical interface, 8 degrees angled PC, ployhenylene sulphide rectangular ferrule, single mode fibres	Accepted
BS EN 61755-3-32 ED 1.0 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces Part 3-32 Optical interface, 8 degrees angled PC, thermoset epoxy rectangular ferrule, single mode fibres	Accepted
BS EN 61755-3-9 Fibre optic interconnecting devices and passive components - Fibre opticconnector opticalinterfaces - Part 3-9: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical PC ferrule for reference connector, single mode fibre	Accepted
BS EN 61850-10 Communication networks and systems for power utility automation - Part 10: Conformance testing	Publication
BS EN 61850-3 Communication networks and systems for power utility automation Part 3: General requirements	Public Comment
BS EN 61850-5 Communication networks and systems for power utility automation Part 5: Communication requirements for functions and device models	Publication
BS EN 61850-7-4/A1 Communication networks and systems in substations Part 7-4 Basic communicaiton structure for substation and feeder equipment - Compatible logical node classes and data classes	Accepted
BS EN 61850-7-4/A2 Communication networks and systems in substations Part 7-4 Basic communicaiton structure for substation and feeder equipment - Compatible logical node classes and data classes	Accepted
BS EN 61850-85-1 Standard for N times 64 kbit per second optical fiber interfaces betweenteleprotection and multiplexer equipment (IEEE C37.94)	Approval
BS EN 61850-90-8 Communication networks and systems for power utility automation Part 90-8: IEC 61850 object models for electric mobility	Public Comment
BS EN 61883-6 Ed 2.0 /A1 Amendment 1 to IEC 61183-6: Consumer audio/video equipment - Digital interface Part 6: Audio and music data transmission protocol (TA4)	Public Comment
BS EN 61883-8 Consumer audio/video equipment - Digital interface Part 8: Transmission of ITU-R BT.601 style digital video data	Public Comment
BS EN 61883-8 Ed 1.0 /A1 Ammendement 1 - Consumer audio/video equipment - Digital interface Part8: Transmission of ITU-R BT.601 style digital video data" (TA 4)	Public Comment
BS EN 61935-1 Ed.4 TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH ISO/IEC 11801 Part 1: Installed cabling	Public Comment
BS EN 61935-2-21 Ed.1 Generic cabling systems — Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-21: Cord and work area cord category 6- Blank detail specification	Public Comment
BS EN 61935-2-22 Ed.1 Generic cabling systems — Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-22: Cord and work area cord category 6A- Blank detail specification	Public Comment
BS EN 61935-2-23 Ed.1 Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-23: Cord and work area cord category 7- Blank detail specification	Public Comment
BS EN 61935-2-24 Ed.1 Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-24: Cord and work area cord category 7A- Blank detail specification	Public Comment
BS EN 61937-6 Ed 2.0 /A1 Ammendment 1 -	Public Comment
BS EN 61966-12-2 Multimedia systems and equipment - Colour measurement and management Part 12-2: Simple Metadata format for identification of colour gamut (TA2)	Accepted
BS EN 61968-100 Application integration at electric utilities - System interfaces for distribution management - Part 100: Implementation profiles	Approval
BS EN 61968-11 Application integration at electric utilities - System interfaces for distribution management - Part 11: Common information model (CIM) extensions for distribution	Publication
BS EN 61968-6 Application integration at electric utilities - System interfaces for distribution management Part 6: Interfaces for maintenance and construction	Public Comment
BS EN 61968-6 Application integration at electric utilities - System interfaces for distribution management Part 6: Interfaces for maintenance and construction	Accepted
BS EN 61968-8 ED 1.0 Application integration at electric utilities - System interfaces for distribution management Part 8: Interface Standard For Customer Support	Public Comment
BS EN 61970-301 Ed 5.0 Energy management system application program interface (EMS-API) Part 301: Common Information Model (CIM) base	Public Comment
BS EN 61970-301 Energy Management System Application Program Interface (EMS-API) – Part 301: Common Information Model (CIM) Base	Approval
BS EN 61970-301 Energy management system application program interface (EMS-API) Part 301: Common information model (CIM) base	Approval
BS EN 61970-452 ED 1.0 Energy Management System Application Program Interface (EMS-API) Energy Management System Application Program Interface (EMS-API) - Part 452: CIM Static Transmission Network Model Profiles	Public Comment
BS EN 61970-453 Ed 2.0 Energy Management System Application Program Interface (EMS-API) Part 453: Diagram Layout Profile	Public Comment
BS EN 61970-456 Energy management system application program interface (EMS-API) - Part 456 : Solved Power System State Interface	Publication
BS EN 61970-502-8 Energy Management System Application Program Interface(EMS-API) Part 502-8: Web Services Profile for 61970-4 Abstract Services	Accepted
BS EN 61970-552 Energy Management System Application Program Interface (EMS-API) Part 552: CIM XML Model Exchange Format	Public Comment
BS EN 61970-555 Energy management system application program interface (EMS-API) - Part 555: CIM based efficient model exchange format (CIM/E)	Idea
BS EN 61970-556 Energy management system application program interface (EMS-API) - Part 556: CIM based graphic exchange format (CIM/G)	Idea
BS EN 62005-9-1 Fibre optic interconnecting devices and passive components - reliability Part 9-1: Qualification of passive optical components	Accepted
BS EN 62005-9-2 Fibre optic interconnecting devices and passive components – Reliability- Part 9-2: Reliability qualification for single fibre optic connector sets – Single mode	null
BS EN 62005-9-3 Fibre optic interconnecting devices and passive components – Reliability - Part 9-3: Reliability qualification for 1-row multi-fibre rectangular ferrule angled PC optic connector sets –single mode, Category C	Public Comment
BS EN 62005-9-4 Fibre optic interconnecting devices and passive components - Reliability Part 9-4: High power qualification of passive optical components for environmental category C	Idea
BS EN 62052-31 62052-31 Electricity metering equipment (AC) - General requirements, test and test conditions Part 31: Product safety requirements	Accepted
BS EN 62053-24 ED 1.0 Electricity metering equipment (a.c.) - Particular requirements Part 24: Static meters for reactive energy (classes 0,5 S, 1 S and a)	Public Comment
BS EN 62055-41 ELECTRICITY METERING - PAYMENT SYSTEMS Part 41: Standard transfer specification (STS) - Application layer protocol for one-way token carrier systems	null
BS EN 62056-1-0 ELECTRICITY METERING DATA EXCHANGE Part 1-0: Smart metering standardization framework	Accepted
BS EN 62056-5-3 ED 1.0 Electricity metering data exchange the DLMS/COSEM suite Part 5-3: DLMS/COSEM Application layer	Approval
BS EN 62056-7-6 ED 1.0 Electricity metering data exchange - The DLMS/COSEM suite Part 7-6: The 3-layer, connection-oriented HDLC based communication prof ile	Approval
BS EN 62056-8-3 ED 1.0 Electricity metering data exchange - The DLMS/COSEM Suite Part 8-3: The PLC SFSK profile for neighbourhood networks	Approval
BS EN 62056-9-7 ED 1.0 Electricity metering data exchange - The DLMS/COSEM Suite Part 9-7: Communication profile for TCP-UDP/IP networks	Publication
BS EN 62074-1 Fibre optic interconnecting devices and passive components - Fibre optic WDM devices Part 1: Generic specification	Public Comment
BS EN 62075:2012/AC:2013 Audio/video, information and communication technology equipment.Environmentally conscious design	Publication
BS EN 62087 Methods of measurement for the power consumption of audio, video and related equipment	Publication
BS EN 62087 METHODS OF MEASUREMENT FOR THE POWER CONSUMPTION OF AUDIO, VIDEO ANDRELATED EQUIPMENT	Publication
BS EN 62087-1 Methods of measurement for the power consumption of audio; video and related equipment Part 1: General (TA12)	Accepted
BS EN 62087-2 Methods of measurement for the power consumption of audio; video and related equipment Part 2: Media (TA12)	Accepted
BS EN 62087-3 Methods of measurement for the power consumption of audio; video and related equipment- Part 3: Television Sets (TA12)	Accepted
BS EN 62087-4 Methods of measurement for the power consumption of audio; video and related equipment Part 4: Video Recording Equipment (TA12)	Accepted
BS EN 62087-5 Methods of measurement for the power consumption of audio; video and related equipment Part 5: Set top boxes (TA12)	Accepted
BS EN 62087-6 Methods of measurement for the power consumption of audio; video and related equipment Part 6: Audio Equipment (TA12)	Accepted
BS EN 62104 Ed 3.0 Characteristics of DAB receivers (TA 1)	Accepted
BS EN 62106 Ed 3.0 Specification of the Radio Data System (RDS) for VHF/FM sound broadcasting in the frequency range from 87;5 to 108;0 MHz (TA 1)	Public Comment
BS EN 62153-4-1 Ed.3 Metallic communication cable test methods Part 4-1: Introduction to Electromagnetic (EMC) Test Methods	Public Comment
BS EN 62153-4-15 Ed.1 Metallic Communication Cable test methods Part 4-15: Electromagnetic compatibility (EMC) – Test method for measuring transfer impedance and screening attenuation – or coupling attenuation with Triaxial Cell	Public Comment
BS EN 62153-4-3 ED.2 Metalic communication cable test methods Part 4-3: Electromagnetic compatability (EMC) - Surface tarnsfer impedance - Triaxial method	Public Comment
BS EN 62153-4-7 Ed.2 Metallic Communication Cable test methods Part 4-7: Electromagnetic compatibility (EMC) - Shielded screening attenuation test method for measuring the Transfer impedance Zt and the screening attenuation aS or the Coupling attenuation aC of RF-Connectors and assemblies up to and above 3 GHz; Tube in Tube method	Public Comment
BS EN 62216 Ed 2.0 Digital terrestrial television receivers for the DVB-T system (TA 1)	Accepted
BS EN 62227/Amd 1 Multimedia home server systems - Digital rights permission code	Publication
BS EN 62325-301 Framework for energy market communications Part 301: Common Information Model (CIM) Extensions for Markets	Public Comment
BS EN 62325-351 Framework for energy market communications Part 351: CIM European Market Model Exchange Profile	Approval
BS EN 62325-450 Framework for energy market communications Part 450: Modelling and messaging methodology	Approval
BS EN 62325-451-1 Framework for energy market communications Part 451-1: Acknowledgement Business Process and Contextual Model for CIM European Market	Public Comment
BS EN 62325-451-2 Framework for energy market communications Part 451-2: Scheduling business process and contextual models for CIM European market	Accepted
BS EN 62325-451-3 Framework for energy market communications Part 451-3: Transmission capacity allocation business process (explicit or implicit auction) and contextual models for European market	Accepted
BS EN 62351-3 Power systems management nd associated information exchange - Data andcommunications security Part 3 : Communication network and system security - Profiles including TCP/IP	Public Comment
BS EN 62361 Harmonization of Quality Codes across TC 57 - Common list of quality codes	Approval
BS EN 62361-100 ED 1.0 Harmonization of Quality Codes across TC 57 - Part 100: Naming and design rules for CIM profiles to XML schema mapping	Public Comment
BS EN 62361-101 Power systems management and associated information exchange - Interoperability in the long term Part 101: Common Information Model Profiles	Accepted
BS EN 62379-3 Common Control Interface for networked digital audio and video products Part 3: Video (TA 4)	Accepted
BS EN 62379-5-1 Common control interface for networked digital audio and video products Part 5-1: Transmission over networks - General	Public Comment
BS EN 62379-5-2 Common control interface for networked digital audio and video products Part 5-2: Transmission over networks - Signalling	Public Comment
BS EN 62379-7 Common Control Interface for networked digital audio and video products Part 7: Measurements (TA 4)	Accepted
BS EN 62394 Ed 2.0 Service diagnostic interface for consumer electronics products and networks - Implementation for ECHONET	Approval
BS EN 62448 Ed 3.0 Multimedia systems and equipment - Multimedia e-publishing and e-books - Generic format for e-publishing	Public Comment
BS EN 62448/AMD 1 Multimedia systems and equipment - Multimedia e-publishing and e-books- Generic format for e-publishing (TA10)	Public Comment
BS EN 62459 Sound System Equipment - Electroacoustical Transducers - Dynamic Measurement of Suspension Parts	Public Comment
BS EN 62481-3 Ed 2.0 Review report on IEC 62481-1: Digital living network alliance (DLNA) home networked device interoperability guidelines Part 1: Archtecture and protocols Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 3: DLNA link protection and Call for experts	Public Comment
BS EN 62481-4 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 4: DRM interoperability solutions (TA 9)	Public Comment
BS EN 62481-5 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 5 -1: DLNA device profile guidelines - General (TA 9)	Public Comment
BS EN 62548 Sound System Equipment - Electroacoustical Transducers - Measurement of Large Signal Parameters	null
BS EN 62608-1 Multimedia systems and equipment - Multimedia home network configuration - System model (TC 100)	Public Comment
BS EN 62634 Ed 2.0 Radio Data System (RDS) - Receiver products and characteristics - Methods of measurement (TA 1)	Public Comment
BS EN 62664-1-1 Fibre optic interconnecting devices and passive components - Fibre Opticconnector product specifications - Part 1-1: LC-PC duplex multi mode connectors terminated on IEC 60793-2 category A1a and A1b fibre	Approval
BS EN 62680-1 Universal Serial Bus interfaces for data and power Part 1: Universal Serial Bus specification; Revision 2.0 (TA14)	Approval
BS EN 62680-2 Universal Serial Bus interfaces for data and power Part 2: USB Micro USB cables and Connectors Specification; Revision 1-01 (TA 14)	Approval
BS EN 62680-3 Universal Serial Serial Bus interfaces for data and power Part 3: USB Battery Charging Specification; Revision 1.2 (TA 14)	Approval
BS EN 62680-4 Universal Serial Bus interfaces for data and power Part 4: Universal Serial Bus cables and Connectors Class Document Rev. 2.0 (TA 14)	Public Comment
BS EN 62698 Multimedia home server systems - Rights information interoperability for IPTV	Publication
BS EN 62702-1 Fibre optic interconnecting devices and passive components - Degrees of protection provided by fibre optic enclosures (IP Codes 65 and 67)- Part 1: General requirements	Idea
BS EN 62746 System interfaces and communication protocol profiles relevant for systems connected to the Smart Grid	Idea
BS EN 62753 Digital Terrestrial Television Receivers for the DTMB system	Public Comment
BS EN 62767 Air Interface Protocol for local multilingual broadcasting (TA 4)	Accepted
BS EN 62783-1Ed.1 TWINAX CABLES FOR DIGITAL COMMUNICATIONS - Part 1: GENERIC SPECIFICATION	Public Comment
BS EN 62810 Ed.1 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods	Public Comment
BS EN 62865 Multimedia home server systems - Relationship between the content usage contract and the digital rights permission code (TA8)	Approval
BS EN 62869 Activities and considerations related to Wireless Power Transfer (WPT) for audio; video and multimedia systems and equipment (TC 100)	Approval
BS EN IEC 61968-9 ED 2.0 Application integration at electric utilities - System interfaces for distribution management Part 9: Interfaces for meter reading and control	Approval
BS EN IEC 61970-453 Ed.2 Energy Management System Application Program Interface (EMS-API) Part 453: Diagram Layout Profile	Public Comment
BS EN ISO/IEC 62056-6-1 Electricity Metering Data Exchange The DLMS/COSEM suite Part 6 -1: COSEM Object Identification System (OBIS)	Approval
BS EN ISO/IEC 62056-6-2 Electricity Metering Data Exchange The DLMS/COSEM suite Part 6-2: COSEM Interface classes	Approval
BS IEC 61938 ED 2.0 Multimedia systems - Guide to the recommended characteristics of analogue interfaces to achieve interoperability	Approval
BS IEC ISO 62056-3-1 ED 1.0 Electricity metering - Data exchange for meter reading, tariff and loadc ontrol Part 31: Use of local area networks on twisted pair with carrier signall ing	Approval
BS ISO 16124 Steel wire rod - Dimensions and tolerances	Public Comment
BS ISO 17745 Steel wire ring mesh panels - Definitions and specifications	Accepted
BS ISO 17746 Steel wire rope mesh panels - Definitions and specifications	Accepted
BS ISO 22034-2 Steel wire and wire products Part 2: Tolerances on wire dimensions	Idea
BS ISO/IEC 14763-3:2006/Cor 1 Information technology - Implementation and operation of customer premises cabling Part 3: Testing of optical fibre cabling	Accepted
BS ISO/IEC 20011 Information technology -Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements- Part XX: Alternative security mechanism for use with ISO/IEC 8802-11	Accepted
BS ISO/IEC 29106 AMENDMENT Information technology - Generic cabling - Introduction to the MICE environmental classification	Public Comment
BS ISO/IEC 9594-8:2008/AMD 2 Password policy	Public Comment
BSEN 61169-1 Radio Frequency Connectors Part 1: Generic specification - General requirements and measuring methods	Approval
BSEN61300-2-48 ED 1.0/A1-A1 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests - Temperature-humidity cycling	Accepted
BSEN61970-302 ED 1.0 Energy management system application program interface (EMS-API) Part 302: Common information model (CIM) financial, energy scheduling and reservations	Public Comment
PD BS IEC/TS 62257-1 Recommendations for small renewable energy and hybrid systems for rural electrification - Part 1: General introduction to rural electrification	Publication
PD BS IEC/TS 62351-5 Power systems management and associated information exchange – Data and communications security Part 5: Security for IEC 60870-5 and derivatives	Approval
PD CLC/TR 50584 Information technology -- CENELEC/ETSI Glossary of terms and definitions on broadband deployment	Accepted
PD EN 50600-2-2 Electrotechnical Aspects of Telecommunication Equipment	Accepted
PD IEC/PAS 61169-42 Radio-frequency connectors - Part 42: Sectional specification for CQN series quick lock RF coaxial connectors	Approval
PD IEC/PAS 61754-25 Fibre optic connector interfaces Part 25: Type RAO connector family	null
PD IEC/TR 61156-1-5 Ed 1.0 Multicore and symmetrical pair/quad cables for digital communications Part 1-5: Correction procedures for the measurement results of return loss and input impedance	Approval
PD IEC/TR 61156-1-5 Multicore and symmetrical pair/quad cables for digital communications Part 1-5: Correction procedures for the measurement results of return loss and input impedance	Idea
PD IEC/TR 61850-90-2 Use of IEC 61850 for the communication between substations and control centres	null
PD IEC/TR 61850-90-4 Communication networks and systems for power utility automation Part 90-4: Network engineering guidelines for substations	Publication
PD IEC/TR 61850-90-5 Communication networks and systems for power utility automation - Part 90-5: Use of IEC 61850 to transmit synchrophasor information according to IEEE C37.118	Idea
PD IEC/TR 62627-03-04 Fibre optic interconecting devices and passive components - Part 03-04: Reliability - Guideline on high power reliability for passive optical components	Accepted
PD IEC/TR 62627-05 ED 1.0 Fibre optic interconnecting devices and passive components Part 05: Investigation on impact of contamination and scratches on optical performance of single mode and multi mode connectors	Approval
PD IEC/TR 62839-1 Ed.1 Environmental declaration Part 1: wires and cables and accessories products specific rules	Idea
PD IEC/TS 60870-5-7 Telecontrol equipment and systems – Part 5-7: Security extensions to IEC 60870-5-101 and IEC 60870-5-104 protocols (IEC 62351-5 secure authentication)	Approval
PD IEC/TS 61580-10-2 Communication networks and systems for power utility automation Part 10-2: Interoperability test for hydro equipments based on IEC 61850	null
PD IEC/TS 62224 ED 2.0 Multimedia home server systems - Conceptual model for digital rights management	Approval
PD IEC/TS 62325-503 Ed 1.0 Framework for energy market communications Part 503: Market data exchanges guidelines for the IEC 62325-351 profile	Approval
PD IEC/TS 62351-9 Power systems management and associated information exchange – Data and and communications security – Part 9: Cyber security key management for power system equipment	Idea
PD IEC/TS 62806-2-1 Fibre optic interconnecting devices and passive components - Technical specification - Part 2-1: Reliability qualification for single fibre optic connector sets - Single mode	null
PD ISO/IEC/TR 29106:2007/AMD 1 Information technology - Generic cabling - Introduction to the MICE environmental classification	Public Comment

[ back to top ]

Published standards (39)

Sort by: Reference | Title | Status

Standard reference	Name	Status
BS 6328-1:1985	Apparatus for connection to private circuits run by certain public telecommunication operators - Specification for apparatus for connection to speechband circuits	Withdrawn
BS 6328-2:1985	Apparatus for connection to private circuits run by certain public telecommunication operators - Specification for apparatus for connection to baseband circuits	Obsolescent
BS 6328-4:1985	Apparatus for connection to private circuits run by certain public telecommunication operators - Specification for apparatus for connection to telegraph circuits using SCVF signalling	Obsolescent
BS 6328-7:1993	Apparatus for connection to private circuits run by certain public telecommunication operators - Specification for apparatus for connection to digital circuits according to CCITT Recommendation X.21 bis	Withdrawn
BS 6328-3:1983	Apparatus for connection to private circuits run by certain public telecommunication operators - Specification for apparatus for connection to direct current circuits	Obsolescent
BS 6328-5:1984	Apparatus for connection to private circuits run by certain public telecommunication operators - Specification for apparatus for connection to wideband (FDM) circuits	Obsolescent
BS 6328-8.1:1993	Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to digital circuits with interfaces according to CCITT G-series Recommendations - G.703 services at 2048 kbit/s and 8448 kbit/s	Withdrawn
BS 6328-8-8.2:1993	Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to digital circuits with interfaces according to CCITT G-series Recommendations - G.703 64 kbit/s service using codirectional option	Withdrawn
BS 6328-8.1:2000	Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to digital circuits with interfaces according to CCITT G-series Recommendations - Section 8.1: G.703 services at 2 048 kbits/s and 8 448 kbits/s	Withdrawn
BS 6312-2.2:1997	Connectors for analogue telecommunication interfaces - Sockets for use with plugs specified in BS 6312-1 - Particular requirements for fixed socket-outlets used in permanent wiring installations	Current
BS 6312-1:1994	Connectors for analogue telecommunication interfaces - Specification for plugs	Current
BS 6312-2.1:1994	Connectors for analogue telecommunication interfaces. Sockets for use with plugs specified in BS 6312:Part 1 - Specification for sockets. General requirements	Current
BS IEC 61334-1-1:1995	Distribution automation using distribution line carrier systems. General considerations - Guide to distribution automation system architecture	Current
PD 7024:1994	Essential requirements for terminal equipment intended for connection to unstructured digital leased circuits of the public telecommunications network using a CCITT Recommendation G.703 interface at a rate of 2048 kbit/s with a 75 ? unbalanced presentation	Current
BS EN 50516-2-1:2011	Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications - Type ODVA PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3	Current
BS EN 50174-2:2009+A1:2011	Information technology. Cabling installation - Installation planning and practices inside buildings	Current
BS EN 50174-1:2009+A1:2011	Information technology. Cabling installation - Installation specification and quality assurance	Current
BS EN 50174-1:2001	Information technology. Cabling installation - Specification and quality assurance	Withdrawn
BS EN 50174-2:2001	Information technology. Cabling installation - Installation planning and practices inside buildings	Withdrawn
BS EN 50173:1996	Information technology. Generic cabling systems	Withdrawn
PD CLC/TR 50173-99-3:2012	Information technology. Generic cabling systems - Home cabling infrastructures up to 50 m in length to support simultaneous and non simultaneous provision of applications	Current
BS EN 50173-4:2007+A2:2013	Information technology. Generic cabling systems - Homes	Current, Work in Hand
BS EN 50173-2:2007+A1:2010	Information technology. Generic cabling systems - Office premises	Current
BS EN 50173-5:2007+A2:2012	Information technology. Generic cabling systems - Data centres	Current
BS EN 50173-1:2007+A1:2009	Information technology. Generic cabling systems - General requirements	Withdrawn
BS EN 50173-1:2011	Information technology. Generic cabling systems - General requirements	Current
BS EN 50173-1:2002	Information technology. Generic cabling systems - General requirements and office areas	Withdrawn
PD CLC/TR 50173-99-2:2010	Information technology. Implementation of BCT applications using cabling in accordance with EN 50173-4	Current
BS ISO/IEC 8882-1:1993	Information technology. Telecommunications and information exchange between systems. X.25-DTE conformance testing - General principles	Withdrawn
BS EN 50174-3:2003	Installation technology. Cabling installation - Installation planning and practices outside buildings	Current, Work in Hand
BS EN 62488-1:2013	Power line communication systems for power utility applications - Planning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids	Current
BS 7879:1997	Sectional specification for equipment cables to be used for digital and analogue communications	Withdrawn
BS EN 60495:1994	Single sideband power-line carrier terminals	Withdrawn
BS 181:1970	Specification for copper-cadmium jointing sleeves for telegraph and telephone purposes	Withdrawn
BS 182:1972	Specification for galvanized line-wire for telephone and telegraph purposes	Current
BS 6312:1982	Specification for plugs for use with British Telecommunications line jack units	Obsolescent
BS 6312:1985	Specification for plugs for use with British Telecommunications line jack units	Obsolescent
BS 16:1974	Specification for telegraph material (insulators, pole fittings, etc.)	Current
BS EN 61935-3:2009	Testing of balanced and coaxial information technology cabling - Installed cabling as specified in EN 50173-4 and related standards	Current

[ back to top ]

Committees (12)

Sort by: Reference | Name

Committee Reference	Title
TCT/2	Analogue telecommunication networks
EPL/100	Audio, video and multimedia systems and equipment
EPL/46	Cables, wires and waveguides, radio frequency connectors and accessories for communication and signalling
NFE/34	Copper and copper alloys
IST/6	Data communications
TCT/6	Digital networks
PEL/13	Electricity Meters
GEL/86/2	Fibre optic interconnecting devices and passive components
PEL/57	Power systems management and associated information exchange
TCT/7	Telecommunications - Installation requirements
TCT/-	Telecommunications Sector Assembly
ISE/106	Wire Rod and Wire

[ back to top ]