BSI Corporate | Contact Us | Site Map | Help

Brazing & soldering

Parent Category: Welding, brazing & soldering

Standards in development (79)
Published standards (44)
Committees (10)

Standards in development (79)

Standard Title	Status
BS 5L 100:2011+A1 Procedure for inspection, testing and acceptance of wrought aluminiumand aluminium alloys	Idea
BS EN 10216-1 Seamless steel tubes for pressure purposes - Technical delivery conditions Part 1: Non-alloy steel tubes with specified room temperature properties	Technical Review
BS EN 10216-2 Seamless steel tubes for pressure purposes - Technical delivery conditions Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties	Technical Review
BS EN 10216-3 Seamless steel tubes for pressure purposes - Technical delivery conditions Part 3: Alloy fine grain steel tubes	Technical Review
BS EN 10216-4 Seamless steel tubes for pressure purposes - Technical delivery conditions Part 4: Non-alloy and alloy steel tubes with specified low temperature properties	Technical Review
BS EN 10216-5 Seamless steel tubes for pressure purposes - Technical delivery conditions Part 5: Stainless steel tubes	Technical Review
BS EN 10217-1 Welded steel tubes for pressure purposes - Technical delivery conditions Part 1: Non-alloy steel tubes with specified room temperature properties	Public Comment
BS EN 10217-2 Welded steel tubes for pressure purposes - Technical delivery conditions Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties	Public Comment
BS EN 10217-3 Welded steel tubes for pressure purposes - Technical delivery conditions Part 3: Alloy fine grain steel tubes	Public Comment
BS EN 10217-4 Welded steel tubes for pressure purposes - Technical delivery conditions Part 4: Electric welded non-alloy steel tubes with specified low temperature properties	Public Comment
BS EN 10217-5 Welded steel tubes for pressure purposes - Technical delivery conditions Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties	Public Comment
BS EN 10217-6 Welded steel tubes for pressure purposes - Technical delivery conditions Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties	Public Comment
BS EN 10217-7 Welded steel tubes for pressure purposes - Technical delivery conditions Part 7: Stainless steel tubes	Public Comment
BS EN 10255 Non-Alloy steel tubes suitable for welding, threading and other joining methods - Technical delivery conditions	Technical Review
BS EN 10344 Malleable cast iron fittings with compression ends for steel pipes	Technical Review
BS EN 10352 Stainless steel plumbing fittings - Fittings with press ends for metallic tubes	Approval
BS EN 10357 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry	Technical Review
BS EN 10358 Unalloyed steel plumbing fittings - Fittings with press ends for unalloyed steel tubes	Technical Review
BS EN 12420 Copper and copper alloys - Forgings	Public Comment
BS EN 13599 Copper and copper alloys - Copper plate, sheet and strip for electrical purposes	Approval
BS EN 13600 Copper and copper alloys - Seamless copper tubes for electrical purposes	Approval
BS EN 13601 Copper and copper alloys - Copper rod, bar and wire for general electrical purposes	Approval
BS EN 13602 Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors	Approval
BS EN 13603 Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes	Approval
BS EN 13604 Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper	Approval
BS EN 13605 Copper and copper alloys - Copper profiles and profiled wire for electrical purposes	Approval
BS EN 2032-001 Aerospace series - Metallic materials Part 1 : Conventional designation	Approval
BS EN 2043 Aerospace series - Metallic materials - General requirements for semi-finished product qualification (excluding forgings and castings)	Approval
BS EN 3875 Aerospace Series - Metallic Materials - Filler metal for brazing - T Technical Specification	Approval
BS EN 3879 Aerospace series - Metallic materials - Filler metal for welding - Technical Specification	Public Comment
BS EN 4400-4 Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification Part 4:Aluminium and aluminium alloy tube	Public Comment
BS EN 4400-7 Aerospace series - Aluminium and aluminium- and magnesium- alloy products - Technical specification Part 7: Aluminium alloy forgings	Accepted
BS EN 4677-002 Aerospace series - Welded and brazed assemblies for aerospace constructions Electron beam welding machine Part 002 : Qualification specifications	Public Comment
BS EN 60068-2-58 ED.4 Environmental testing - Part 2-58: Tests Td- Test methodds for solderability, resistance to dissolution of metalization and to soldering heat of surface mounting devices (SMD)	Public Comment
BS EN 60068-3-13 Environmental testing - Part 3-13: Supporting documentation and guidance on test T: Soldering	Public Comment
BS EN 60194 ED.6 Printed board design, manufacture and assembly - Terms and definitions	Public Comment
BS EN 61188-8 ED 1.0 Componenet shape data specification for CAD library - Part 8-1: Generic descriptions of the 2D and 3D description	Accepted
BS EN 61189-11 ED.1 Test methods for electrical materials, interconnection structures and assemblies - Part 11: Measurement of melting temperature and melting temperature ranges of solder alloys	Approval
BS EN 61189-3-913 ED.1 Test methods for electronic circuit board for high-brightness LEDs	Public Comment
BS EN 61189-5-2 Ed.1 Test methods for electrical materials, interconnection structures and assemblies - Part 5-2: Test methods for printed board assemblies: Soldering Flux	Public Comment
BS EN 61189-5-3 Ed.1 Test methods for electrical materials, interconnection structures and assemblies - Part 5-3: Test methods for printed board assemblies: Soldering paste	Public Comment
BS EN 61189-5-4 Ed.1 Test methods for electrical materials, interconnection structures and assemblies - Part 5-4: Test methods for printed board assemblies: Solder alloys and fluxed abd non-fluxed solid wire	Public Comment
BS EN 61190-1-2 AM1 Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality intercomnnects in electronics assembly	Public Comment
BS EN 61191-1 ED 2.0 Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies	Approval
BS EN 61191-2 ED 2.0 Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies	Approval
BS EN 61193-3 QUality assessment systems - Part 3: Selection and use of sampling palns for printed board and laminate end-product and in-process auditing	Approval
BS EN 61249-3-1, ED.1 Materials for printed boards and other interconnecting structures - Part 3-1: Copper-clad lamintes for flexible baords (adhesive and non- adhesive tpes)	Idea
BS EN 61249-4-18 Materials for printed boards and other interconnecting structures - Part 4-18: Sectional specification set for prepeg materials, unclad (for the manufacture of multilayer boards) - High performance epoxide woven E-glass prepeg of defind flammability (vertical burning test) for lead- free assembly	Approval
BS EN 61249-4-19 Materials for printed boards and other interconnecting structures - Part 4-19: Sectional specification set for prepeg materials, unclad (for the manufacture of multilayer boards) - High performance non- halogenated epoxide woven of defind flammability (vertical burning test) for lead-free assembly	Approval
BS EN 61760-4 ED 1.0 Classification, Packaging,Labelling and handling of moisture sensitive devices	Accepted
BS EN 62137-4 Ed.1 Electronics assembly technology Part 4: Endurance test methods for solder joint of area array type package surface mount devices	Public Comment
BS EN 62137-4 Review report on IEC 62137-4 Ed.1: Electronics assembly technology Part 4: Environmental and endurance test methods for solder joint of area array type package surface mount devices	Accepted
BS EN 62326-15 Printed boards - Device Embedded Substrate - General electrical test guide for device embedded substrate with active device, passive components (Capacitor, Resistor, Inductor, etc), Integrated passive device (IPD), and dicrete packages.	Public Comment
BS EN 62326-18 Ed.1 Printed boards Part 18: Standard on Device Embeded Substrate - Test methods	Idea
BS EN 62326-20 ED.1 Electronic circuit board for high-brightness LEDs Printed boards	Idea
BS EN 62468 ED. 1.0 The marking for presence and absence of the specified chemical substancein materials, components and mounted boards in electrical and electronicequipment	Approval
BS EN 62588 ED.1 Marking and labeling components, PCBs and PCBAs to identify lead (Pb), lead-free (Pb-free) and other attributes	Public Comment
BS EN 62699 ED 1.0 Mapping Rules and Exchange Methods for Heterogeneous Part Libraries	Public Comment
BS EN 62739-1 Test method for erosion of wave solering equipment by molten lead free solder alloy Part 1: Erosion test method for the metalic material without surface treatment	Approval
BS EN ISO 9692-3 Welding and allied processes - Recommendations for joint preparation Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys	Idea
BS EN STAN 8.4301 Aerospace series - Welded and brazed assemblies for aerospace constructi ons - Joints of metallic materials by electron beam welding - Quality ofwelded assemblies	null
BS ENISO 2553 Welding and allied processes - Symbolic representation on drawings Part 1 : Welding	Public Comment
BS ENISO 6520-2 Welding and allied processes - Classification of geometric imperfections in metallic materials Part 2: Welding with pressure	Publication
BS ENISO 9453 Soft solder alloys - Chemical compositions and forms	Public Comment
BS ENISO 9455-5 Soft soldering fluxes -- Test methods -- Part 5: Copper mirror test	Public Comment
BS ENISO 9692-1 Welding and allied processes - Recommendations for joint preparation Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels	Approval
BS ISO 12175 Space data and information transfer systems - Standard formatted data units - Structure and construction rules	Accepted
BS ISO 13526 Space data and information transfer systems - Tracking data message	Accepted
BS ISO 16378 Space systems - Measurements of thermo-optical properties of thermo control materials	Public Comment
BS ISO 16709 Realtime solar activity and space environment information for spacecraft operation	Accepted
BS ISO 17255 Space systems - Programme management - Statement of work	Accepted
BS ISO 22646 Space data and information transfer systems - Space packet protocol	Accepted
BS ISO 22666 Space data and information transfer systems - AOS (advanced orbiting systems) space data link protocol	Accepted
BS ISO 22670 Space data and information transfer systems - Space link extension (SLE) - Return-channel-frames service	Approval
BSEN62326-3 ED 1.0 PRINTED BOARDS Part 3: Safety Certification of Rigid Printed Circuit Boards for Electronic Assemblies	Public Comment
PD IEC/TS 62326-16 Ed.1 Printed boards Part 16: Device Enbedded Subctrate Technology - Generics	Idea
PD IEC/TS 62326-17 Ed.1 Printed boards Part 17: Device enbedded substrates - TEG (test element group)	Idea
PD IEC/TS 62326-19 Ed.1 Printed boards Part 19: Device Embedded Substrate - Design Guide	Accepted
PD IEC/TS 62326-7-1 Printed boards - Part 7-1: Performance guide for single-and double-sided flexible peinted boards	Accepted

[ back to top ]

Published standards (44)

Sort by: Reference | Title | Status

Standard reference	Name	Status
BS 1723-1:1986	Brazing - Specification for brazing	Withdrawn
BS 1723-2:1986	Brazing - Guide to brazing	Withdrawn
BS 1723-3:1988	Brazing - Methods for non-destructive and destructive testing	Withdrawn
BS 1723-4:1988	Brazing - Methods for specifying brazing procedure and operator approval testing	Withdrawn
BS EN 13133:2000	Brazing. Brazer approval	Withdrawn
BS EN 12797:2000	Brazing. Destructive tests of brazed joints	Current
BS EN ISO 17672:2010	Brazing. Filler metals	Current
BS EN 1044:1999	Brazing. Filler metals	Withdrawn
BS EN 1045:1997	Brazing. Fluxes for brazing. Classification and technical delivery conditions	Current
BS EN 14324:2004	Brazing. Guidance on the application of brazed joints	Current
BS EN ISO 18279:2003	Brazing. Imperfections in brazed joints	Current
BS EN 12799:2000	Brazing. Non-destructive examination of brazed joints	Current
BS EN 13134:2000	Brazing. Procedure approval	Current
BS EN 13347:2002	Copper and copper alloys. Rod and wire for welding and braze welding	Current, Work in Hand
BS EN ISO 3677:1995	Filler metal for soft soldering, brazing and braze welding. Designation	Current
BS EN 29453:1994	Soft solder alloys. Chemical compositions and forms	Withdrawn
BS EN ISO 9453:2006	Soft solder alloys. Chemical compositions and forms	Current, Work in Hand
BS EN ISO 9454-2:2001	Soft soldering fluxes. Classification and requirements - Performance requirements	Current
BS EN 29454-1:1994	Soft soldering fluxes. Classification and requirements - Classification, labelling and packaging	Current
BS EN 29455-1:1994	Soft soldering fluxes. Test methods - Determination of non-volatile matter, gravimetric method	Current
BS EN ISO 9455-9:1996	Soft soldering fluxes. Test methods - Determination of ammonia content	Current
BS EN ISO 9455-2:1996	Soft soldering fluxes. Test methods - Determination of non-volatile matter, ebulliometric method	Current
BS EN ISO 9455-6:1997	Soft soldering fluxes. Test methods - Determination and detection of halide (excluding fluoride) content	Current
BS EN ISO 9455-10:2001	Soft soldering fluxes. Test methods - Flux efficacy test, solder spread method	Withdrawn
BS EN ISO 9455-16:2001	Soft soldering fluxes. Test methods - Flux efficacy tests, wetting balance method	Withdrawn
BS EN ISO 9455-12:1994	Soft soldering fluxes. Test methods - Steel tube corrosion test	Current
BS EN ISO 9455-13:2000	Soft soldering fluxes. Test methods - Determination of flux spattering	Current
BS EN ISO 9455-15:2000	Soft soldering fluxes. Test methods - Copper corrosion test	Current
BS EN ISO 9455-17:2006	Soft soldering fluxes. Test methods - Surface insulation resistance comb test and electrochemical migration test of flux residues	Current
BS EN ISO 9455-16:2013	Soft soldering fluxes. Test methods - Flux efficacy test, wetting balance method	Current
BS EN ISO 9455-10:2012	Soft soldering fluxes. Test methods - Flux efficacy test, solder spread method	Current
BS EN 29455-5:1993	Soft soldering fluxes. Test methods. - Copper mirror test	Current, Work in Hand
BS EN 29455-8:1993	Soft soldering fluxes. Test methods. - Determination of zinc content	Current
BS EN 29455-11:1993	Soft soldering fluxes. Test methods. - Solubility of flux residues	Current
BS EN 29455-14:1993	Soft soldering fluxes. Test methods. - Assessment of tackiness of flux residues	Current
BS EN ISO 12224-3:2003	Solder wire, solid and flux cored. Specification and test methods - Wetting balance test method for flux core solder wire efficacy	Current
BS EN ISO 10564:1997	Soldering and brazing materials. Methods for the sampling of soft solders for analysis	Current
BS EN 14612:2003	Space product assurance. Verification and approval of automatic machine wave soldering	Current
BS 1845:1984	Specification for filler metals for brazing	Withdrawn
BS 5245:1975	Specification for phosphoric acid based flux for soft soldered joints in stainless steel	Current
BS 5625:1980	Specification of purchasing requirements and methods of test for fluxes for soft soldering	Withdrawn
BS 441:1980	Specification of purchasing requirements for flux-cored and solid soft-solder wire	Withdrawn
BS ISO 857-2:2005	Welding and allied processes. Vocabulary - Soldering and brazing processes and related terms	Current
BS EN 24063:1992	Welding, brazing, soldering and braze welding of metals. Nomenclature of processes and reference numbers for symbolic representation on drawings	Withdrawn

[ back to top ]

Committees (10)

Sort by: Reference | Name

Committee Reference	Title
WEE/19	Brazing and braze welding
NFE/34	Copper and copper alloys
WEE/1	Definitions and symbols for welding
EPL/501	Electronic assembly technology & Printed Electronics
ACE/61	Metallic materials for aerospace purposes
NFE/27/4	Solders and soldering fluxes
ACE/68	Space systems and operations
ISE/110	Steel Tubes, and Iron and Steel Fittings
NFE/27	Tin and tin alloys
NFE/34/1	Wrought and unwrought copper and copper alloys

[ back to top ]