Skip to content
RSS feed for this category

Control components

Standards in development (44)

Sort by: Title | Status

Standard TitleStatus
BS 1212-4 Float operated valves. Specification for compact type float operated valves for WC flushing cisterns (including floats)Accepted
BS EN 1113 Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specificationApproval
BS EN 16146:2012/A1 Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specificationsPublication
BS EN 60534-2-3 Ed. 3.0 Industrial-process control valves - Part 2-3: Flow capacity - Test proceduresPublic Comment
BS EN 60534-4 Ed 4.0 Industrial-process control valves Part 4: Inspection and routine testingPublic Comment
BS EN 60534-8-4 Ed 3.0 Industrial-process control valves Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flowPublic Comment
BS EN 61003-1 Ed. 3.0 IEC 61003-1 Ed. 3.0 Industrial-process control systems - Instruments with analogue inputsand two- or multi-state outputs - Part 1: Methods of evaluating performancePublic Comment
BS EN 61003-2 Ed 2.0 Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs Part 2: Guidance for inspection and routine testingPublic Comment
BS EN 61207-2 Ed. 2.0 IEC 61207-2 Ed. 2.0 Expression of Performance of Gas Analyzers Part 2: Oxygen in Gas (utilizing high-temperature electrochemical sensors)Accepted
BS EN 61207-3 Ed. 3.0 IEC 61207-3 Ed. 3.0 Expression of Performance of Gas Analyzers Part 3: Paramagnetic oxygen analysersAccepted
BS EN 61207-6 Ed 2.0 Expression of Performance of Gas Analyzers- Part 6: Photometric analyzersApproval
BS EN 61285 Ed 3.0 Industrial Process Control - Safety of Analyzer HousesApproval
BS EN 61515 Ed 2.0 Mineral insulated cables and thermocouplesPublic Comment
BS EN 61987-21 List of Properties (LOP) of process control valves for electronic data exchange - Generic structuresPublic Comment
BS EN 61987-22 Lists of Properties (LOP) of control valves and actuators for electronic data exchangePublic Comment
BS EN 61987-23 Industrial-Process Measurement and Control - Data Structures and Elements in Process Equipment Catalogues Part 23: List of Properties (LOP) of valve actuators for electronic data exchangePublic Comment
BS EN 61987-24-1 Industrial-Process Measurement and Control - Data Structures and Elements in Process Equipment Catalogues Part 24-1: List of Properties (LOP) of positioners for electronic data exchangePublic Comment
BS EN 62828-1 industrial measurement transmittersAccepted
BS EN 62828-2 Reference conditions and procedures for industrial measurement transmitters Part 2: Specific procedures for pressure transmittersAccepted
BS EN 62828-3 Ed1.0 conditions and procedures for testingindustrial measurement transmitters - Part 3: Specific procedures for temperature transmittersPublic Comment
BS ISO 10762 Hydraulic fluid power - Cylinder mounting dimensions - 10 MPa (100 bar) seriesPublic Comment
BS ISO 10771-1 Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes Part 1: Test methodPublic Comment
BS ISO 1219-3 Fluid power systems and components - Graphical symbols and circuit diagrams Part 3: Symbol modules and connected symbols in circuit diagramsPublic Comment
BS ISO 14743 Pneumatic fluid power - Push-in connectors for thermoplastic tubesAccepted
BS ISO 15380 Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HETG, HEPG, HEES and HEPRAccepted
BS ISO 18582-1 Fluid power systems and components - Standardized product properties Part 1: Organization and structure of reference dictionaryAccepted
BS ISO 19973-1 Pneumatic fluid power - Assessment of component reliability by testing Part 1: General proceduresPublic Comment
BS ISO 19973-2 Pneumatic fluid power - Assessment of component reliability by testing Part 2: Directional control valvesPublic Comment
BS ISO 19973-3 Pneumatic fluid power - Assessment of component reliability by testing Part 3: Cylinders with piston rodPublic Comment
BS ISO 19973-5 Pneumatic fluid power - Assessment of component reliability by testing Part 5: Non-return valves, shuttle valves, dual pressure valves, one-way adjustable flow control valves, quick-exhaust valvesPublication
BS ISO 20145 Pneumatic fluid power - Test method for measuring acoustic emission pressure level of exhaust silencers.Idea
BS ISO 4393 Fluid power systems and components - Cylinders - Basic series of piston strokesPublication
BS ISO 5781 Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfacesPublic Comment
BS ISO 6020-2 Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Part 2: Compact seriesTechnical Review
BS ISO 6020-3 Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Part 3: Compact series with bores from 250 mm to 500 mmPublic Comment
BS ISO 6432 Pneumatic fluid power - Single rod cylinders - 10 bar (1 000 kPa) series - Bores from 8 to 25 mm - Mounting dimensionsPublication
BS ISO 6953-1 Pneumatic fluid power - Compressed air pressure regulators and filter-regulators Part 1: Main characteristics to be included in literature from suppliers and product-marking requirementsPublication
BS ISO 6953-2 Pneumatic fluid power - Compressed air pressure regulators and filter-regulators Part 2: Test methods to determine the main characteristics to be included in literature from suppliersPublication
BS ISO 7368 Hydraulic fluid power - Two-port slip-in cartridge valves - CavitiesPublic Comment
BS ISO 8132 Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Mounting dimensions for accessoriesPublication
BS ISO 8133 Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series - Mounting dimensions for accessoriesPublication
PD CLC/TS 62603-1 Industrial process control systems - Guideline for evaluating processcontrol systems - ,, Part 1: Specifications(IEC/TS 62603-1:2014) ,,Publication
PD ISO/TR 16194 Pneumatic fluid power - Assessment of component reliability by accelerated life testing - General guidelines and proceduresAccepted
PD ISO/TS 13725 Hydraulic fluid power - Cylinders - Method for determining the buckling loadIdea

[ back to top ]

Published standards (51)

Sort by: Reference | Title | Status

Standard referenceNameStatus
BS 7296-1:1990Cavities for hydraulic fluid power cartridge valves - Specification for two-port slip-in valvesCurrent, Work in Hand
BS 6494-1:1984Hydraulic fluid power valve mounting surfaces - Specification for four-port directional control valvesWithdrawn
BS 6494-3:1989Hydraulic fluid power valve mounting surfaces - Specification for pressure-relief valvesWithdrawn
BS 6494-2:1986Hydraulic fluid power valve mounting surfaces - Specification for four-port and five-port servo-valvesWithdrawn
BS 6494-5:1989Hydraulic fluid power valve mounting surfaces - Specification for compensated flow-control valvesWithdrawn
BS 6494-6:1989Hydraulic fluid power valve mounting surfaces - Specification for pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valvesWithdrawn
BS 6494-4:1989Hydraulic fluid power valve mounting surfaces. - Specification for clamping dimensions of four-part, size 03 and 05, modular stack valves and directional control valvesWithdrawn
BS ISO 6263:2013Hydraulic fluid power. Compensated flow-control valves. Mounting surfacesCurrent
BS ISO 6263:1997Hydraulic fluid power. Compensated flow-control valves. Mounting surfacesWithdrawn
BS ISO 10770-2:1998Hydraulic fluid power. Electrically modulated hydraulic control valves - Test methods for three-way directional flow control valvesWithdrawn
BS ISO 10770-1:1998Hydraulic fluid power. Electrically modulated hydraulic control valves - Test methods for four-way directional flow control valvesWithdrawn
BS ISO 10770-3:2007Hydraulic fluid power. Electrically modulated hydraulic control valves - Test methods for pressure control valvesCurrent
BS ISO 10770-1:2009Hydraulic fluid power. Electrically modulated hydraulic control valves - Test methods for four-port directional flow-control valvesCurrent
BS ISO 10770-2:2012Hydraulic fluid power. Electrically modulated hydraulic control valves - Test methods for three-port directional flow-control valvesCurrent
BS ISO 10372:1992Hydraulic fluid power. Four-and five-port servovalves. Mounting surfacesCurrent
BS ISO 4401:2005Hydraulic fluid power. Four-port directional control valves. Mounting surfacesCurrent
BS ISO 4401:1994Hydraulic fluid power. Four-port directional control valves. Mounting surfacesWithdrawn
BS ISO 7790:1997Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05. Clamping dimensionsWithdrawn
BS ISO 7790:2013Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10. Clamping dimensionsCurrent
BS ISO 16874:2004Hydraulic fluid power. Identification of manifold assemblies and their componentsCurrent
BS ISO 5781:2000Hydraulic fluid power. Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves. Mounting surfacesCurrent, Work in Hand
BS ISO 16873:2002Hydraulic fluid power. Pressure switches. Mounting surfacesWithdrawn
BS ISO 16873:2011Hydraulic fluid power. Pressure switches. Mounting surfacesCurrent
BS ISO 6264:1998Hydraulic fluid power. Pressure-relief valves. Mounting surfacesCurrent
BS ISO 7789:1998Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. CavitiesWithdrawn
BS ISO 7789:2007Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. CavitiesCurrent
PD ISO/TR 17209:2013Hydraulic fluid power. Two-, three-and four-port screw-in cartridge valves. Cavities with ISO 725 (UN and UNF) threadsCurrent
BS ISO 4411:2008Hydraulic fluid power. Valves. Determination of pressure differential/flow characteristicsCurrent
BS 5944-4:1984Measurement of airborne noise from hydraulic fluid power systems and components - Method of determining sound power levels from valves controlling flow and pressureCurrent
BS 4151:1967Method of evaluating pneumatic valve positioners with input signal of 3 to 15 lbf/in2 (gauge)Current
BS 5995:1980Methods of test for electrohydraulic servovalvesWithdrawn
BS ISO 20401:2005Pneumatic fluid power systems. Directional control valves. Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mmCurrent
BS 7389-1:1990Pneumatic fluid power valve mounting surfaces - Specification for five-port directional control valves (without electrical connector)Withdrawn
BS ISO 15218:2003Pneumatic fluid power. 3/2 solenoid valves. Mounting interface surfacesCurrent
BS ISO 6953-2:2000Pneumatic fluid power. Compressed air pressure regulators and filter-regulators - Test methods to determine the main characteristics to be included in literature from suppliersCurrent, Work in Hand
BS ISO 6953-3:2013Pneumatic fluid power. Compressed air pressure regulators and filter-regulators - Alternative test methods for measuring the flow-rate characteristics of pressure regulatorsCurrent
BS ISO 6953-1:2000Pneumatic fluid power. Compressed air pressure regulators and filter-regulators - Main characteristics to be included in literature from suppliers and product-marking requirementsCurrent, Work in Hand
BS ISO 15524:2011Pneumatic fluid power. Cylinders. Single-rod short-stroke cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mmCurrent
BS ISO 12238:2001Pneumatic fluid power. Directional control valves. Measurement of shifting timeCurrent
BS ISO 10041-1:2010Pneumatic fluid power. Electro-pneumatic continuous flow control valves - Main characteristics to include in the supplier's literatureCurrent
BS ISO 10041-2:2010Pneumatic fluid power. Electro-pneumatic continuous flow control valves - Test methods to determine main characteristics to include in the supplier's literatureCurrent
BS ISO 10094-1:2010Pneumatic fluid power. Electro-pneumatic pressure control valves - Main characteristics to include in the supplier's literatureCurrent
BS ISO 10094-2:2010Pneumatic fluid power. Electro-pneumatic pressure control valves - Test methods to determine main characteristics to include in the supplier's literatureCurrent
BS ISO 5599-1:2001Pneumatic fluid power. Five-port directional control valves - Mounting interface surfaces without electrical connectorCurrent
BS ISO 5599-2:2001Pneumatic fluid power. Five-port directional control valves - Mounting interface surfaces with optional electrical connectorCurrent
BS ISO 15407-2:2003Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces with optional electrical connectorCurrent
BS ISO 15407-1:2000Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces without electrical connectorCurrent
BS ISO 11727:1999Pneumatic fluid power. Identification of ports and control mechanisms of control valves and other componentsCurrent
BS ISO 17082:2004Pneumatic fluid power. Valves. Data to be included in supplier literatureCurrent
BS 4062-2:1990Valves for hydraulic fluid power systems - Methods for determining performanceCurrent
BS 4062-1:1982Valves for hydraulic fluid power systems - Methods for determining pressure differential/flow characteristicsWithdrawn

[ back to top ]

Committees (6)

Sort by: Reference | Name

Committee ReferenceTitle
MCE/18/-/5Control components
MCE/18/-/3Cylinders
GEL/65/2Elements of systems
MCE/18Fluid power systems and components
MCE/18/-/8Product testing
B/504Water supply

[ back to top ]

Recently Viewed
Need Help?

We are here to help you with any queries. Email us for help.

But first, why not view the Help Pages?