BSI Corporate | Contact Us | Site Map | Help

General

Parent Category: Fire Protection

Standards in development (116)
Published standards (60)
Committees (18)

Standards in development (116)

Standard Title	Status
BS 5499-10 Safety signs, including fire safety signs Part 10: Code of practice for the use of safety signs, including fire safety signs	Accepted
BS 5499-4 Safety signs, including fire safety signs Part 4: Code of practice for escape route signing	Accepted
BS 6643-1 Recharging fire extinguishers (manufactured to BS EN 3 'Specification for portable fire extinguishers') Part 1: Specification for procedure and materials	Idea
BS 6643-2 Recharging fire extinguishers (manufactured to BS EN 3 'Specification for portable fire extinguishers') Part 2: Specification for powder refill charges	Idea
BS 7346-7 Components for smoke and heat control systems Part 7: Code of practice on functional recommendations and calculation methods for smoke and heat control systems for covered car parks	Public Comment
BS 7346-8 Code of Practice for components for smoke control systems Part 8: Guidelines for planning, design, installation, commissioning, use and maintenance	Idea
BS 8569 Water safety signs - Guidance for use of coastal slipway safety signs an d symbols	Accepted
BS 9251 Sprinkler systems for residential and domestic occupancies - Code ofpractice	Idea
BS EN 1127-2 Explosive atmospheres - Explosion prevention and protection Part 2: Basic concepts and methodology for mining	Public Comment
BS EN 12101-10 Smoke and heat control systems Part 10: Power supplies	Idea
BS EN 12101-2 Smoke and heat control systems Part 2: Natural smoke and heat exhaust ventilators	Accepted
BS EN 12101-3 Smoke and heat control systems Part 3 : Specification for powered smoke and heat control ventilators	Technical Review
BS EN 12101-9 Smoke and heat control systems Part 9: Control panels	Idea
BS EN 12259-2 Fixed firefighting systems - Components for sprinkler and water spray systems Part 2: Wet alarm valve assemblies	Idea
BS EN 15080-12 Extended application of results from fire resistance tests Part 12: Penetration seals	Technical Review
BS EN 16447 Explosion isolation flap valves	Public Comment
BS EN 1866-2 Mobile fire extinguishers Part 2: Requirements for the Construction, Pressure Resistance and Mechanical Tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1	Public Comment
BS EN 1866-3 Mobile fire extinguishers Part 3: Requirements for the Assembly, Construction and Pressure Resistance of CO2 extinguishers which comply with the requirements of EN 1866-1	Approval
BS EN 2242 Aerospace series - Crimping of electric cables with conductors defined by EN 2083 , EN 4434 and EN 2346	Approval
BS EN 2267-009:2013/Cor 1 Aerospace series - Cables, electrical, for general purpose - Operatingtemperatures between - 55 °C and 260 °C Part 009: DRA family, single and multicore assembly - Product standard	null
BS EN 2591-227 Aerospace series - Elements of electrical and optical connection - Test methods Part 227: Partial discharges test	Public Comment
BS EN 3-8 Portable Fire Extinguishers Part 8 - Requirements for the Construction, Pressure Resistance and Mechanical Tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 3-7.	Idea
BS EN 3155-020 Aerospace Series. Electrical contacts used in elements of connection Size 10 Contact, electrical, triaxial, male 020, type D, crimp, class R, Product Standard	Accepted
BS EN 3155-021 Aerospace Series. Electrical contacts used in elements of connection Contacts, electrical, triaxial, size 10 female, type D, crimp, class R - Product Standard	Accepted
BS EN 3646-004 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous -Part 004: Receptacle, jam-nut mounting - Product standard	Approval
BS EN 3682-001 Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous Part 001: Technical specification	Approval
BS EN 3682-002 Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous Part 002: Specification of performance and contact arrangements	Approval
BS EN 4165-019 Aerospace series - Connectors, electrical, rectangular, modular, operating temperature 175 degrees C continuous Part 019: Protective cover for plug, for 2 or 4 modules series 2 and 3 - Product standard	Public Comment
BS EN 4604 Aerospace series - Cable, electrical, for signal transmission Part 005 Cable, coaxial, 75 ohms, 200 deg C, Type WL - Product standard	Public Comment
BS EN 4641-100 Aerospace series: Cables, optical 125 µm diameter cladding Part 100: Tight structure 62.5-125 µm GI fibre 1.8 mm outside diameter - Product standard	null
BS EN 4651 Aerospace series - Copper-clad aluminium alloy conductors for electrical cables - Product standard	Approval
BS EN 4652-002 Aerospace series - Connectors, coaxial, radiofrequency Part 002: Specification of performances	null
BS EN 4681-001 Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium Part 001: Technical Specification	Approval
BS EN 4701-002 Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4531-101 contacts Part 002: Specification of performance	Approval
BS EN 4701-003 Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4531-101 contacts Part 003: Module series 2 Product standard	Approval
BS EN 6059-307 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 307: Ageing	Public Comment
BS EN 60695-1-11 Ed 2.0 Fire hazard testing Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment	Public Comment
BS EN 60695-1-40 Fire Hazard Testing Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids	Public Comment
BS EN 60695-10-2 ED 3.0 Fire hazard testing -- Part 10-2: Abnormal heat -- Ball pressure test	Public Comment
BS EN 60695-11-10 ED.2 Fire hazard testing Part 11-10: Test flames - 50 W horizontal and vertical flame test methods	Publication
BS EN 60695-11-2 ED 2.0 Fire hazard testing -- Part 11-2: Test flames - 1 kW pre-mixed flame: Apparatus, confirmatory test arrangement and guidance	Public Comment
BS EN 60695-11-20 ED.2 Fire hazard testing Part 11-20: Test flames - 500 W flame test methods	Accepted
BS EN 60695-2-10 ED.2 Fire hazard testing Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure	Publication
BS EN 60695-2-12 A1 Ed 2.0 IEC 60695-2-12-A1 Ed 2.0: Fire hazard testing Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials	Public Comment
BS EN 60695-2-12 Ed 2.0 /A1 Fire hazard testing Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials	Public Comment
BS EN 60695-2-13 A1 Ed 2.0 Fire hazard testing Part -2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials	Public Comment
BS EN 60695-2-13 Ed 2.0 /A1 Fire hazard testing Part 2-13: Glowing/hot-wire based test methods -Low-wire ignition temperature (GWIT) test method for materials	Public Comment
BS EN 60695-8-2 IEC 60695-8-2 Ed 1.0: Fire hazard testing Part 8-2: Heat release - Summary and relevance of test methods	Accepted
BS EN 60695-8-2 IEC 60695-8-2 Ed 1.0: Fire hazard testing Part 8-2: Heat release – Summary and relevance of test methods	Public Comment
BS EN 60695-9-2 Fire hazard testing Part 9-2: Surface spread of flame - Summary and relevance of test methods	Public Comment
BS EN WI 00070031 Extinguishing aerosol dispenser	Idea
BS EN WI 00191245 EN 12259-12 - Fixed firefighting systems - Components for sprinkler and water spray systems Part 12: Sprinkler pumps	Idea
BS EN WI 00191246 EN 12259-9 - Fixed firefighting systems - Components for sprinkler and water spray systems Part 9: Deluge valve assembly	Idea
BS ENISO 13943 Fire safety - Vocabulary	Idea
BS ENISO 7010:2012/A1 Graphical symbols - Safety colours and safety signs - Registered safety signs	Accepted
BS ENISO 7010:2012/A2 Graphical symbols - Safety colours and safety signs - Registered safety signs	Accepted
BS ENISO 7010:2012/A3 Graphical symbols - Safety colours and safety signs - Registered safety signs	Accepted
BS ISO 11433:1993/AMD 1 Nickel alloys - Determination of titanium content - Diantipyrylmethane molecular absorption spectrometric method	Publication
BS ISO 16405 Measurement of toxic gas production using FTIR technique for room corner test and open calorimetry	Public Comment
BS ISO 16706 Ships and Marine Technology - Marine evacuation systems	Accepted
BS ISO 16707 Ships and marine technology - Marine evacuation systems - Determination of capacity of Marine Evacuation Systems (MES)	Public Comment
BS ISO 16737 Fire safety engineering - Requirements governing algebraic equations - Vent flows	Publication
BS ISO 18223 Nickel alloys - Determination of Nickel content - Inductively coupled plasma atomic emission spectrometric method	Accepted
BS ISO 19292 Ships and marine technology - Point-type resettable flame detectors for ships	Public Comment
BS ISO 19700 Controlled equivalence ratio method for the determination of hazardous components of fire effluents	Accepted
BS ISO 19702 Toxicity testing of fire effluents - Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis	Accepted
BS ISO 20712-3 Water safety signs and beach safety flags Part 3: Guidance for use	Public Comment
BS ISO 21891 Aerospace electrical requirements - Insulating, heat shrink, sleeves and moulded shapses - Specification for aircraft use	Idea
BS ISO 24409-2 Ships and marine technology - Design, location, and use of shipboard signs for fire protection, life-saving appliance, and means of espace Part 2: Catalogue	Public Comment
BS ISO 24409-3 Design, location, and use of shipboard safety signs - Part 3 Code of practice for means of escape, life-saving appliances, and fire-fighting equipment signs.	Public Comment
BS ISO 27027 Aerospace -- Solid-state remote power controllers -- General performancerequirements	Public Comment
BS ISO 28564-2 Public information guidance systems Part 2: Design principles and requirements of location signs and direction signs	Accepted
BS ISO 29903 Guidance for the comparison of toxic gas data from different tests	Approval
BS ISO 29904 Fire chemistry - Aerosols generation and measurement in fire	Approval
BS ISO 7001:2007/AMD 46 Symbol PI PF 062: Communication in the specified language	Public Comment
BS ISO 7001:2007/AMD 47 Symbol PI PF 063: Recycling aluminium cans	Public Comment
BS ISO 7001:2007/AMD 48 Symbol PI PF 064: Recycling - Magnetic type of steel	Public Comment
BS ISO 7001:2007/AMD 49 Symbol PI PF 065: Recycling - Glass	Public Comment
BS ISO 7001:2007/AMD 50 Symbol PI PF 066: Recycling bin or container	Public Comment
BS ISO 7001:2007/AMD 51 Symbol PI PB 007: Take off your shoes	Public Comment
BS ISO 7010:2003/AMD 7 Graphical symbols - Safety colours and safety signs - Safety signs used in workplaces and public areas	Approval
BS ISO 7010:2011/Amd 179 Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 179: Safety sign W039: Warning; Falling ice	Accepted
BS ISO 7010:2011/Amd 180 Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 180: Safety sign W040: Warning; Roof avalanche	Accepted
BS ISO 7010:2011/Amd 4 Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 4	Public Comment
BS ISO 7364 Shipbuilding and marine structures - Deck machinery - Accommodation ladder winches	Idea
BS ISO 9186-1 Graphical symbols - Test methods Part 1: Methods for testing comprehensibility	Approval
BS ISO 9186-3 Graphical symbols - Test methods Part 3: Methods for testing recognisability	Public Comment
BS ISO 9705-1 Fire tests - Full-scale room test for surface products	Accepted
BS ISO/IEC 80079-36 Explosive atmospheres Part 36: Non-electrical equipment for use in explosive atmospheres - Basic methods and requirements	Public Comment
BS ISO/IEC 80079-37 Explosive atmospheres Part 37: Non-electrical equipment for use in explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k'	Public Comment
BS ISO/IEC 80079-38 Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines	Public Comment
BSEN 60695-2-11 ED 2.0 Fire hazard testing Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end products (GWEPT)	Public Comment
BSEN60695-1-12 ED 1.0 Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering	Public Comment
BSEN60695-11-6 ED 1.0 TS ED.1 Fire hazard testing Part 11-6: Test flames - Comparative burning characteristics of tubular polymeric materials supported in a vertical position - Apparatus and test method	Public Comment
Fire hazard testing Part 9-1: Surface spread of flame - General guidance	Publication
PD CEN/TR 4646 Aerospace series - Fibres and cables of optical contact EN4531 - Aircraft use - TR n°4646	null
PD CEN/TR 4653 Aerospace series - Technical specification of plating of connectors Cadmium and hexavalent Chromium replacement	null
PD CEN/TR 4654-001 Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, EN4644 specific products Part 1 : Technical specification	null
PD CEN/TR 4654-002 Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, EN4644 specific products Part 002: Specification of performance and list of technical reports	null
PD CEN/TR 4654-003 Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, EN4644 specific products Part 003: Inserts with PC tails electrical contacts -Technical report	null
PD CEN/TR 4654-010 Aerospace series - Connectors, electrical Part 010: 1Q18 connectors - Technical report	null
PD CEN/TR 4654-200 Aerospace series - Connectors, electrical Part 200: Size 8 male quadrax contact pc tails – Technical report	null
PD CEN/TR 4680 Aerospace series - Contacts, electrical, qualification for change of materials and process	Accepted
PD CEN/TR 6058 ED 11 Aerospace series: Cable code identification list	Idea
PD IEC/TS 60695-2-20 Fire hazard testing -- Part 2-20: Glowing/hot wire based test methods - Hot wire coil ignitability - Apparatus, confirmatory test arrangement and guidance	Idea
PD IEC/TS 60695-6-2 ED 3.0 TR Fire hazrd testing - Part: 6-2: Smoke obscuration - Summary and relevance of test methods	Accepted
PD ISO/TR 10796-2 Fire safety engineering Part 2: Example on the application of IS 16730 to the assessment, verification and validation of a CFD model	Accepted
PD ISO/TR 10796-3 Fire safety engineering Part 3: Example on the application of IS 16730 to the assessment, verification and validation of a structural model	Accepted
PD ISO/TR 10796-4 Fire safety engineering Part 4: Example on the application of IS 16730 to the assessment, verification and validation of an egress model	Accepted
PD ISO/TR 16730-2 Fire safety engineering - Assessment, verification and validation of calculation methods	Approval
PD ISO/TR 16732-2 - Fire risk assessment Part 2: Example of an office building	Approval
PD ISO/TR 16732-3 Fire safety engineering - Fire risk assessment Part 3: Example of an industrial property	Approval
PD ISO/TR 24679-3 Fire safety Engineering - Performance of structure in fire Part 3: Example of an open car park	Accepted
PD ISO/TR 26368 Guidance on containment systems for the prevention of pollution arising from uncontrolled fire water run-off	Approval
PD ISO/TS 11925-1 Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame Part 1: Guidance on ignitability	Accepted
PD ISO/TS 13447 Fire Safety Engineering - Guidance for use of zone fire models	Approval

[ back to top ]

Published standards (60)

Sort by: Reference | Title | Status

Standard reference	Name	Status
BS EN 2:1992	Classification of fires	Current
BS 7899-1:1997	Code of practice for assessment of hazard to life and health from fire - General guidance	Current
BS 7899-2:1999	Code of practice for assessment of hazard to life and health from fire - Guidance on methods for the quantification of hazards to life and health and estimation of time to incapacitation and death in fires	Current
DD 9999:2005	Code of practice for fire safety in the design, construction and use of buildings	Withdrawn
BS 9999:2008	Code of practice for fire safety in the design, management and use of buildings	Current
BS 7346-5:2005	Components for smoke and heat control systems - Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing time-dependent design fires. Code of practice	Current
BS 5588-10:1991	Fire precautions in the design, construction and use of buildings - Code of practice for shopping complexes	Withdrawn
BS 5588-11:1997	Fire precautions in the design, construction and use of buildings - Code of practice for shops, offices, industrial, storage and other similar buildings	Withdrawn
BS 5588-12:2004	Fire precautions in the design, construction and use of buildings - Managing fire safety	Withdrawn
BS 5588-5:2004	Fire precautions in the design, construction and use of buildings - Access and facilities for fire-fighting	Withdrawn
BS 5588-5:1991	Fire precautions in the design, construction and use of buildings - Code of practice for firefighting stairs and lifts	Withdrawn
BS 5588-9:1989	Fire precautions in the design, construction and use of buildings - Code of practice for ventilation and air conditioning ductwork	Withdrawn
BS 5588-3:1983	Fire precautions in the design, construction and use of buildings - Code of practice for office buildings	Withdrawn
BS 5588-2:1985	Fire precautions in the design, construction and use of buildings - Code of practice for shops	Withdrawn
BS 5588-1:1990	Fire precautions in the design, construction and use of buildings - Code of practice for residential buildings	Withdrawn
BS 5588-9:1999	Fire precautions in the design, construction and use of buildings - Code of practice for ventilation and air conditioning ductwork	Withdrawn
BS 5588-6:1991	Fire precautions in the design, construction and use of buildings - Code of practice for places of assembly	Withdrawn
BS ISO/TR 13387-1:1999	Fire safety engineering - Application of fire performance concepts to design objectives	Current
BS ISO/TR 13387-2:1999	Fire safety engineering - Design fire scenarios and design fires	Current
BS ISO/TR 13387-6:1999	Fire safety engineering - Structural response and fire spread beyond the enclosure of origin	Current
BS ISO/TR 13387-7:1999	Fire safety engineering - Detection, activation and suppression	Current
BS ISO/TR 13387-8:1999	Fire safety engineering - Life safety. Occupant behaviour, location and condition	Current
BS ISO/TR 13387-3:1999	Fire safety engineering - Assessment and verification of mathematical fire models	Current
BS ISO/TR 13387-4:1999	Fire safety engineering - Initiation and development of fire and generation of fire effluents	Current
BS ISO/TR 13387-5:1999	Fire safety engineering - Movement of fire effluents	Current
BS ISO 16732-1:2012	Fire safety engineering. Fire risk assessment - General	Current
BS ISO 23932:2009	Fire safety engineering. General principles	Current
DD ISO/TS 24679:2011	Fire safety engineering. Performance of structures in fire	Current
BS 9991:2011	Fire safety in the design, management and use of residential buildings. Code of practice	Current
BS 5499-1:1990	Fire safety signs, notices and graphic symbols - Specification for fire safety signs	Withdrawn
BS EN ISO 13943:2000	Fire safety. Vocabulary	Withdrawn
BS EN ISO 13943:2010	Fire safety. Vocabulary	Current
BS ISO 29473:2010	Fire tests. Uncertainty of measurements in fire tests	Current
BS 4422:2005	Fire. Vocabulary	Current
DD 8458-1:2010	Fixed fire protection systems. Residential and domestic watermist systems - Code of practice for design and installation	Current
BS ISO 19703:2005	Generation and analysis of toxic gases. Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires	Current
BS 4422-4:1975	Glossary of terms associated with fire - Fire protection equipment	Withdrawn
BS 4422-5:1989	Glossary of terms associated with fire - Smoke control	Withdrawn
BS 4422-1:1987	Glossary of terms associated with fire - General terms and phenomena of fire	Withdrawn
BS 4422-7:1988	Glossary of terms associated with fire - Explosion detection and suppression means	Withdrawn
BS 4422-2:1990	Glossary of terms associated with fire - Structural fire protection	Withdrawn
BS 4422-3:1990	Glossary of terms associated with fire - Fire detection and alarm	Withdrawn
BS 4422-9:1990	Glossary of terms associated with fire. - Marine terms	Withdrawn
BS 5499-5:2002	Graphical symbols and signs. Safety signs, including fire safety signs - Signs with specific safety meanings	Withdrawn
BS 5499-1:2002	Graphical symbols and signs. Safety signs, including fire safety signs - Specification for geometric shapes, colours and layout	Withdrawn
BS EN ISO 7010:2012	Graphical symbols. Safety colours and safety signs. Registered safety signs	Current
DD 180:1989	Guide for the assessment of toxic hazards in fire in buildings and transport	Current
BS ISO 26367-1:2011	Guidelines for assessing the adverse environmental impact of fire effluents - General	Current
BS ISO 19706:2007	Guidelines for assessing the fire threat to people	Withdrawn
BS ISO 19706:2011	Guidelines for assessing the fire threat to people	Current
BS ISO 19701:2013	Methods for sampling and analysis of fire effluents	Current
BS ISO 19701:2005	Methods for sampling and analysis of fire effluents	Withdrawn
BS ISO 5658-4:2001	Reaction to fire tests. Spread of flame - Intermediate-scale test of vertical spread of flame with vertically oriented specimen	Current
BS 1635:1990	Recommendations for graphic symbols and abbreviations for fire protection drawings	Current
BS ISO 23601:2009	Safety identification. Escape and evacuation plan signs	Current
BS 5499-10:2006	Safety signs, including fire safety signs - Code of practice for the use of safety signs, including fire safety signs	Current
BS ISO 17631:2002+A1:2011	Ships and marine technology. Shipboard plans for fire protection, life-saving appliances and means of escape	Current
PD 7974-6:2004	The application of fire safety engineering priciples to fire safety design of buildings - Human factors. Life safety strategies. Occupant evacuation, behaviour and condition (Sub-system 6)	Current
PD 6503-1:1990	Toxicity of combustion products - General	Current
BS ISO 12828-1:2011	Validation method for fire gas analysis - Limits of detection and quantification	Current

[ back to top ]

Committees (18)

Sort by: Reference | Name

Committee Reference	Title
ACE/6	Aerospace avionic electrical and fibre optic technology
EXL/23	Explosion and fire precautions in industrial and chemical plant
FSH/2	Fire extinguishers
GEL/89	Fire hazard testing
FSH/14	Fire precautions in buildings
FSH/22	Fire resistance tests
FSH/24	Fire safety engineering
FSH/9	Fire terminology
PH/8	Graphical symbols
PH/8/1	Graphical Symbols - Safety Signs
FSH/16	Hazards to life from fire
SME/32/-/1	Lifesaving and fire protection
I/-	Miscellaneous standards materials and chemicals
FSH/21	Reaction to fire tests
FSH/21/-/7	Reaction to fire tests - Large and intermediate scale tests
FSH/21/-/3	Reaction to fire tests - Spread of flame tests
FSH/25	Smoke, heat control systems and components
FSH/18/2	Sprinkler Systems

[ back to top ]