Skip to content
RSS feed for this category

Water quality

Standards in development (475)

Sort by: Title | Status

Standard TitleStatus
BS 1212-4 Float operated valves. Specification for compact type float operated valves for WC flushing cisterns (including floats)Accepted
BS 17898 Code of practice for the management of observed hydrometric dataPublic Comment
BS 3692 ISO metric precision hexagon bolts, screws and nuts. SpecificationPublic Comment
BS 4190. ISO metric black hexagon bolts, screws and nuts. SpecificationPublic Comment
BS 55032 Ed.2 Amd 1 ED.2 A1 F3 Electromagnetic compatibility of multimedia equipment - Emission requirementsPublic Comment
BS 5911-3:2010+A1:2014+COR1 Concrete pipes and ancillary concrete products Part 3: Specification for unreinforced and reinforced concrete manholes and soakaways (complementary BS EN 1917:2002)Publication
BS 6259 Code of practice for the design, planning, installation, testing and mai ntenance of sound systemsPublic Comment
BS 6920-1 Suitability of non-metallic products for use in contact with waterintended for human consumption with regard to their effect on thequality of the water Part 1 - Specificationnull
BS 8485 Code of practice for the characterization and remediation from groundgas in affected developmentsIdea
BS 8554 Code of practice for the sampling and monitoring of hot and cold water services in buildingsPublic Comment
BS 8558 Guide to the design, installation, testing and maintenance of servicessupplying water for domestic use within buildings and their curtilages –Complementary guidance to BS EN 806null
BS EN 1018:2013/A1 Chemicals used for treatment of water intended for human consumption - Calcium carbonateApproval
BS EN 1113 Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specificationApproval
BS EN 12007-3 Gas infrastructure - Pipelines with a MOP up to and including 16 bar Part 3: Specific funtional requirements for steelPublic Comment
BS EN 12186 Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirementsPublication
Opens a new windowBS EN 12671 Chemicals used for treatment of water intended for human consumption - Chlorine dioxide generated in situPublic Comment
Opens a new windowBS EN 12678 Chemicals used for treatment of water intended for human consumption - Potassium peroxomonosulfatePublic Comment
BS EN 12732:2013/A1 Gas infrastructure - Welding steel pipework - Functional requirementsPublication
BS EN 12764 Sanitary appliances - Specification for whirlpool bathsAccepted
BS EN 12876 Chemicals used for treatment of water intended for human consumption - OxygenApproval
BS EN 12897 Water supply – Specification for indirectly heated unvented (closed) storage water heatersPublic Comment
BS EN 12926 Chemicals used for treatment of water intended for human consumption - Sodium peroxodisulfateApproval
Opens a new windowBS EN 12931 Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, anhydrousApproval
BS EN 12932 Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, dihydrateApproval
BS EN 12933 Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Trichloroisocyanuric acidApproval
BS EN 13176 Chemicals used for treatment of water intended for human consumption - EthanolApproval
BS EN 13194 Chemicals used for treatment of water intended for human consumption - Acetic AcidApproval
BS EN 13310 Kitchen sinks - Functional requirements and test methodsAccepted
BS EN 13407 Wall-hung urinals - Functional requirements and test methodsAccepted
BS EN 13508-2:2003+A1: Investigation and assessment of drain and sewer systems outsidebuildings. Visual inspection coding systemnull
Opens a new windowBS EN 13765:2010/A1 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals — Specification/Amendment 1Approval
BS EN 13794 Respiratory protective devices - Self-contained breathing apparatus for escape - Requirements, testing, markingPublic Comment
BS EN 140402 Blank Detail Specification: Fixed low power wirewound surface mount (SMD) resistorsApproval
BS EN 140402-801 Detail specification: Fixed low power wirewound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2Idea
BS EN 14055:2010/A1 WC and urinal flushing cisternsAccepted
BS EN 1420 Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems - Test methodPublic Comment
BS EN 14296 Sanitary appliances - Communal washing troughsAccepted
BS EN 1434-1 Heat meters Part 1: General requirementsPublic Comment
BS EN 1434-2 Heat meters Part 2: Constructional requirementsPublic Comment
BS EN 1434-4 Heat meters Part 4: Pattern approval testsPublic Comment
BS EN 1434-5 Heat meters Part 5: Initial verification testsPublic Comment
BS EN 1434-6 Heat meters Part 6: Installation, commissioning, operational monitoring and maintenancePublic Comment
BS EN 14368 Products used for treatment of water intended for human consumption - Manganese dioxide coated limestoneApproval
BS EN 14369 Products used for treatment of water intended for human consumption - Iron-coated granular activated aluminaApproval
BS EN 14420-8:2013/A1 Hose fittings with clamp units Part 8: Symmetrical half coupling (Guillemin system)/Amendment 1Idea
BS EN 14428 Shower enclosures - Functional requirements and test methodsApproval
BS EN 14516 Baths for domestic purposesIdea
BS EN 14528 Bidets - Functional requirements and test methodsAccepted
BS EN 14688 Sanitary appliances - Wash basins - Functional requirements and test methodsAccepted
BS EN 14718 Influence of organic materials on water intended for human consumption -Determination of the chlorine demand - Test methodApproval
BS EN 14757 Water quality - Sampling of fish with multi-mesh gillnetsPublic Comment
BS EN 15030:2012/A1 Chemicals used for treatment of water intended for human consumption - Silver salts for intermittent useApproval
BS EN 15074 Chemicals used for treatment of swimming pool water - OzonePublication
BS EN 15719 Sanitary appliances - Baths made from impact modified coextruded ABS/acrylic sheets - Requirements and test methodsIdea
BS EN 15768 GC-MS identification of water leachable organic substances from material s in contact with water intended for human consumptionApproval
BS EN 16146:2012/A1 Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specificationsPublication
BS EN 16397-1 Flexible couplings Part 1: Performance requirementsApproval
BS EN 16397-2 Flexible couplings Part 2 - Materials and dimensions for metal banded flexible couplingsApproval
BS EN 16421 Influence of materials on water for human consumption - Enhancement of microbial growth (EMG)Approval
BS EN 16506 Systems for renovation of drains and sewers - Lining with a rigidly anch ored plastics inner layer (RAPL)Approval
BS EN 16578 Sustainability assessment Part 1: Ceramics sanitary appliancesPublic Comment
BS EN 16643 assemblies - Unbonded fluoroplastic lined (e. g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - SpecificationPublic Comment
BS EN 16691 Water quality - Determination of polycyclic aromatic hydrocarbons (PAH) in whole water samplesPublic Comment
BS EN 16693 Water quality - Determination of organochlorine pesticides (OCP) in whole water samples using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)Public Comment
BS EN 16694 Water quality - Determination of pentabromodiphenyl ether (PBDE) in whole water samples using solid phase extraction (SPE) with SPE-disks combined with gas chromatography - mass spectrometry (GC-MS)Public Comment
BS EN 16695 Water quality - Guidance on the estimation of algal biovolumePublic Comment
BS EN 16698 Water quality - Guidance on quantitative and qualitative sampling of phytoplankton from inland watersPublic Comment
BS EN 16726 Gas infrastructure - Quality of natural gas - Group HPublic Comment
BS EN 1918-1 Gas supply systems - Underground gas storage Part 1: Functional recommendations for storage in aquifersPublic Comment
BS EN 1918-2 Gas infrastructure - Underground gas storage Part 2: Functional recommendations for storage in oil and gas fieldsPublic Comment
BS EN 1918-3 Gas infrastructure - Underground gas storage Part 3: Functional recommendations for storage in solution-mined salt cavitiesPublic Comment
BS EN 1918-4 Gas infrastructure - Underground gas storage Part 4: Functional recommendations for storage in rock cavernsPublic Comment
BS EN 1918-5 Gas infrastructure - Underground gas storage Part 5: Functional recommendations for surface facilitiesPublic Comment
BS EN 33:2011/CORR @:2013 WC pans and WC suites - Connecting dimensionsnull
BS EN 50117-4-2 Coaxial cables Part 4-2: Sectional specification for CATV cables up to 6 GHz used in cables distribution networksIdea
BS EN 50288-10-2 Multi-element metallic cables used in analogue and digital communication and control Part 10-2: Sectional specification for screened cables characterized from 1 MHz up to 500 MHz - Horizontal and building backbone cablesPublic Comment
BS EN 50288-11-2 Multi-element metallic cables used in analogue and digital communication and control Sectional specification for un-screened cables, characterized from 1 MHz up to 500 MHz - Horizontal and building backbone cablesPublic Comment
BS EN 50288-9-2 Multi-element metallic cables used in analogue and digital communication and control Part 9-2: Sectional specification for screened cables characterised from 1 MHz uo to 1000 MHz - Work area, patch cord and data centre cablesPublic Comment
BS EN 50289-1-17 Communications cables – Specifications for test methods Part 1-17: Electrical test methods – Exogenous Crosstalk ExNEXT and ExFEXTAccepted
BS EN 50290-2-21:2001+A1:2007+Corr Common design rules and construction. PVC insulation compoundsnull
BS EN 50290-2-33 Communication cables Part 2-33: Common design rules and construction - Polyethylene for multi element metallic data cables for indoor applicationIdea
BS EN 50290-2-37 Communication cables Part 2-37: Common design rules and construction - Polyethylene insulation for coaxial cablesIdea
BS EN 50290-2-38 Communication cables Part 2-38: Common design rules and construction - Polypropylene insulation for coaxial cablesIdea
BS EN 50290-4-1 Ed.2 prEN 50290-4-1 ed.2 : Communication cables Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspectsApproval
BS EN 50290-4-2 Ed.2 prEN 50290-4-2 ed.2 : Communication cables Part 4-2: General considerations for the use of cables - Guide to useApproval
BS EN 50561-2 Power line telecommunications modems - Radio disturbance characteristics - Limits and methods of measurement - Part 2: Modems for access networksIdea
BS EN 50561-3 Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and methods of measurement Part 3: Apparatus operating above 30 MHzPublic Comment
BS EN 50849 Sound systems for emergency purposesPublic Comment
BS EN 50849 Sound systems for emergency purposesPublication
BS EN 50882-11 Multi-element metalic cables used in analogue and digital communication and control Part 11: Sectional specification for un-screened cables, characterised up to 500 MHz, for horizontal and building backbone wiringPublic Comment
BS EN 55011 Am1 f1 Ed.6.0 Industrial, scientific and medical equipment - Radio-frequencydisturbance characteristics - Limits and methods of measurementnull
BS EN 55011 FF3 ED 6 Supplement of CISPR 11 with the APD method and associated limits forasse ssment of fluctuating RF disturbances in the range above 1 GHzPublic Comment
BS EN 55012 Ed. 7.0 Vehicles, boats and internal combustion engines - Radio disturbancecharacteristics - Limits and methods of measurement for the protectionof off-board receiversAccepted
BS EN 55013:2013/A1 Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurementPublic Comment
BS EN 55014-1 Ed 6 - Requirements for household appliances, electric tools and similar apparatus - Part 1: EmissionPublic Comment
BS EN 55014-2/A3 Ed.1 Electromagnetic compatibility - Requirements for household appliances,el ectric tools and similar apparatus - Part 2: Immunity - Product family standardPublic Comment
BS EN 55015 Ed 8.0 /A1 Amendment 1 - Interference relating to household appliances tools; lighting equipment and similar apparatusPublic Comment
BS EN 55015 Ed 8.0 Am.1 (f3) Limits and methods of measurement of radio disturbance characteristicsof lighting and similar equipmentPublic Comment
BS EN 55015 Ed.8.0 Am.1 f2 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipmentPublic Comment
BS EN 55020:2007+A1 Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurementPublication
BS EN 55025 ED.4.0 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers. Annex on ALSE Performance Verification 150 kHz - 1 GHzPublic Comment
BS EN 55032 Ed2 f1 equipment and receivers - Radio disturbance characteristics limits and methods of measurementPublic Comment
BS EN 55032 F1 ED. 2 A1 Electromagnetic compatibility of multimedia equipment - Emission requirementsPublic Comment
BS EN 55032 F2 Ed 2 A1 Electromagnetic compatibility of multimedia equipment - Emission requirementsPublic Comment
BS EN 55032:2013 F4 ED.2 Electromagnetic compatibility of multimedia equipment - Emission requirementsPublic Comment
BS EN 55032:2013 F5 ed2 Electromagnetic compatibility of multimedia equipment - Emission requirementsPublic Comment
BS EN 60062 Ed 6.0 Marking codes for resistors and capacitorsAccepted
BS EN 60063 Preferred number series for resistors and capacitorsPublic Comment
BS EN 60079-1 ED. 7.0 IEC 60079-1 Ed. 7.0 Explosive atmospheres Part 1: Equipment protection by flameproof enclosures "d"Publication
BS EN 60079-10-1 Ed 2.0 Explosive atmospheres Part 10-1: Classification of areas - Explosive gas atmospheresPublic Comment
BS EN 60079-10-2 Ed 2.0 Explosive atmospheres Part 10-2: Classification of areas - Combustible dust atmospheresPublic Comment
BS EN 60079-13 Ed 2.0 Explosive atmospheres Part 13: Equipment protection by pressurized room p and artificially ventilated room vPublic Comment
BS EN 60079-18 Ed 4.0 Explosive atmospheres Part 18: Equipment protection by encapsulation "m"Approval
BS EN 60079-19 Ed 3.0 /A1 Amendment 1: Explosive atmospheres Part 19: Equipment repair; overhaul and reclamationPublic Comment
BS EN 60079-2 Explosive atmospheres Part 2: Equipment protection by pressurized enclosure "p"Publication
BS EN 60079-26 Explosive atmospheres Part 26: Equipment with equipment protection level (EPL) GaApproval
BS EN 60079-28 Ed 2.0 Explosive atmospheres Part 28: Protection of equipment and transmission systems using optical radiationPublic Comment
BS EN 60079-29-1 Ed 2.0 Explosive atmospheres Part 29-1: Gas detectors - Performance requirements of detectors for flammable gasesPublic Comment
BS EN 60079-29-2 Ed 2.0 Explosive atmospheres Part 29-2: Gas detectors - Selection; installation; use and maintenance of detectors for flammable gases and oxygenPublic Comment
BS EN 60079-30-1 Explosive atmospheres Part 30-1: Electrical resistance trace heating- General; type testing and design requirementsPublic Comment
BS EN 60079-30-2 Explosive atmospheres Part 30-2: Electrical resistance trace heating- Application guide for design; installation and maintenancePublic Comment
BS EN 60079-32-2 Explosive atmospheres Part 32-2: Electrostatics hazards - TestsPublic Comment
BS EN 60079-5 Ed 4.0 Explosive atmospheres Part 5: Equipment protection by powder filling "q"Public Comment
BS EN 60079-6 Ed 4.0 Explosive atmospheres Part 6: Equipment protection by oil immersion "o"Public Comment
BS EN 60079-7 IEC 60079-7 Ed. 5.0 Explosive atmospheres Part 7: Equipment protection by increased safety 'e'Public Comment
BS EN 60096-0-1 Ed.3 Amd 1 Radio frequency cables Part 0-1: Guide to the design of detail specifications - Coaxial cables, Amendment 1null
BS EN 60115-2 Fixed resistors for use in electronic equipment. Part 2: Sectional specification: Fixed low-power non-wirewound resistorsPublication
BS EN 60115-22014+A1 Fixed resistors for use in electronic equipment Part 2: Sectional specification: Leaded fixed low power film resistorsnull
BS EN 60115-8-1 Fixed resistors for use in electronic equipment Part 8-1: Blank detail specification - Fixed chip resistors. Assessment level EApproval
BS EN 60153-1 HOLLOW METALLIC WAVEGUIDES Part 1: General requirements and measuring methodsPublic Comment
BS EN 60153-2 Ed 3.0 HOLLOW METALLIC WAVEGUIDES Part 2: Relevant specifications for ordinary rectangular waveguidesPublic Comment
BS EN 60154-1 Ed 3.0 FLANGES FOR WAVEGUIDES Part 1: General requirementsPublic Comment
BS EN 60154-2 Ed 3.0 FLANGES FOR WAVEGUIDES Part 2: Relevant specifications for flanges for ordinary rectangular waveguidesPublic Comment
BS EN 60195 Method of measurement of current noise generated in fixed resistorsAccepted
BS EN 60286-2 Packaging of components for automatic handling Part 2: Tape packaging of components with unidirectional leads on continuous tapesPublic Comment
BS EN 60335-1 A1 F1 ED 5 Household and similar electrical appliances - Safety - Part 1: General requirementsApproval
BS EN 60335-2-11/A1 Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryersPublication
BS EN 60335-2-24/A2/Ed7 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makersPublic Comment
BS EN 60335-2-24:2010+A1 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice- cream appliances and ice-makersPublication
BS EN 60335-2-24:2010/FprAA Household and similar electrical appliances - Safety - Part 2-24 Particular requirements for refrigerating appliances, ice-cream appliances abd ice makersPublic Comment
BS EN 60335-2-34/A1/Ed5 Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressorsPublic Comment
BS EN 60335-2-4: 2010/A1 Household and similar electrical appliances - Safety - Part 2-4 Particular requirements for spin extractorsPublication
BS EN 60335-2-5 Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashersPublication
BS EN 60335-2-58-A2/Ed3 Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machinesPublic Comment
BS EN 60335-2-58:2005+A12 Household and similar electrical appliances – Safety – Part 2-58: Particular requirements for commercial electric dishwashing machinesPublication
BS EN 60335-2-89/A2/Ed2 Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incoporated or remote refrigerant unit or compressorPublic Comment
BS EN 60335-2-89:2010+A1 Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressorPublication
BS EN 60384-1 Fixed capacitors for use in electronic equipment - Part 1: Generic specificationPublic Comment
BS EN 60384-14 Ed 4.0 /A1 Fixed capacitors for use in electronic equipment Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mainsAccepted
BS EN 60384-14-1 Ed 3.0 Fixed capacitors for use in electronic equipment Part 14-1: Blank detail specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level DZAccepted
BS EN 60384-14-2 Ed 2.0 Fixed capacitors for use in electronic equipment Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Safety tests onlyAccepted
BS EN 60384-18 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyteAccepted
BS EN 60384-19 Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene- terephthalate film dielectric surface mount d.c. capacitorsPublic Comment
BS EN 60384-20 Fixed capacitors for use in electronic equipment Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitorsPublic Comment
BS EN 60384-23 Fixed capacitors for use in electronic equipment - Part 23: Sectional specification: Fixed surface mount metallized polyethylene naphthalate film dielectric d.c. capacitorsPublic Comment
BS EN 60384-24 Fixed capacitors for use in electronic equipment Part 24: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolytePublic Comment
BS EN 60384-25 Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolytePublic Comment
BS EN 60384-3 Fixed capacitors for use in electronic equipment - Part 3: Sectional specification: Surface mount fixed tantalum electrolyt capacitors with manganese dioxide solid electrolyteAccepted
BS EN 60384-4 Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyteAccepted
BS EN 60384-8 Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class1Public Comment
BS EN 60384-9 Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2Public Comment
BS EN 60534-2-3 Ed. 3.0 Industrial-process control valves - Part 2-3: Flow capacity - Test proceduresPublic Comment
BS EN 60534-4 Ed 4.0 Industrial-process control valves Part 4: Inspection and routine testingPublic Comment
BS EN 60534-8-4 Ed 3.0 Industrial-process control valves Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flowPublic Comment
BS EN 60539-1 Directly heated negative temperature coefficient thermistors Part 1: Generic specificationPublic Comment
BS EN 60728-101 Cable networks for television signals; sound signals and interactive services - System performance for forward path with all digital channels loadAccepted
BS EN 60728-3-2 Cable networks for television signals; sound signals and interactive services - IEC 60728; Part 3-X : Method of measurement of non-linearity for active equipment using five carriesAccepted
BS EN 60939-3 Passive filter units for electromagnetic interference suppression Part 3: Standard for passive filter units for which safety tests are appropriatePublic Comment
BS EN 60940 Guidance information on the application of capacitors, resistors, inductors and complete filter units for radio interference suppression Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class1Public Comment
BS EN 60958-3 Ed 3.0 /A2 Amendment 2 - Digital audio interface Part 3: Consumer applicationsPublic Comment
BS EN 60958-4-1 Digital audio interface Part 4-1: Professional applications - Audio Content (TA 4)Accepted
BS EN 60958-4-2 Digital audio interface Part 4-2: Professional applications - Metadata and subcode (TA 4)Accepted
BS EN 60958-4-3 Digital audio interface Part 4-3: Professional applications Transport (TA 4)Accepted
BS EN 60958-4-4 Digital audio interface Part 4-4: Professional applications - Physical and electrical (TA 4)Accepted
BS EN 60966-1 Ed.3 Cables, wires, waveguides, r.f. connectors, and accessories for communication and signallingPublic Comment
BS EN 60966-2-4 Ed 4 Detail specification for cable assebmblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz, IEC 61196-2 connectorsPublic Comment
BS EN 60966-2-5 Ed 4 Detail specification for cable assebmblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz, IEC 61196-2 connectorsPublic Comment
BS EN 60966-2-6 Ed 4 Detail specification for cable assebmblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz, IEC 61196-24 connectorsPublic Comment
BS EN 60966-2-7 ED.1 Radio frequency and coaxial cable assemblies Part 2-7: Detail specification for cable assemblies for radio and TV recievers - Frequency range 0 MHz to 3000 MHz, IEC 61169-47 connectorsApproval
BS EN 61003-1 Ed. 3.0 IEC 61003-1 Ed. 3.0 Industrial-process control systems - Instruments with analogue inputsand two- or multi-state outputs - Part 1: Methods of evaluating performancePublic Comment
BS EN 61003-2 Ed 2.0 Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs Part 2: Guidance for inspection and routine testingPublic Comment
BS EN 61045-1 Fixed film resistor networks for use in electronic equipment - Part 1 : Generic specificationPublic Comment
BS EN 61156-10 Ed1.0 pair/quad cables for digitial communications Part 10: Cables for work area wiring with transmission characteristics up to 2 GHz - Sectional specificationPublic Comment
BS EN 61156-9 Ed1.0 pair/quad cables for digitial communications Part 9: Cables for horizontal floor wiring with transmission characteristics up to 2 GHz - Sectional specificationPublic Comment
BS EN 61169-11 Radio-frequency connectors Part 11: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9.5 mm with threaded coupling - characteristic impedance 50 ohm (Type 4.1-9.5)Accepted
BS EN 61169-47 Ed 2.0 Radio-Frequency Connectors Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 ? cable networks (type F- Quick)Public Comment
BS EN 61169-48 Ed.1 Radio-frequency connectors - Part 48: Sectional specification for BMP Series Blind mating R.F. coaxial connectorsPublic Comment
BS EN 61169-49 Ed 1.0 Radio-frequency connectors - Part 49: Sectional specification for SMAA series R.F connectorsPublication
BS EN 61169-50 Ed1.0 Radio-frequency connectors Part 50: Sectional specifications RF coaxial connectors with inner diameter of outer conductors 4.11 mm with quick lock system. Characteristics impendance 50 Ohm (type QMA)Public Comment
BS EN 61169-51 Ed1.0 Radio-frequency connectors - Part 51: Sectional specifications RF coaxial connectors with inner diameter of outer conductors 13.5 mm with bayonet lock characteristics impedamce 50 Ohm (type QLI)Approval
BS EN 61169-52 Ed1.0 Radio- Frequency Connectors Part 52: Sectional specification for series MMCX RF coaxial connectorsPublic Comment
BS EN 61169-53 Radio-frequency connectors Part 53: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 16 mm with screw lock -Characteristic impedance 50 ohm (Type S7-16)Accepted
BS EN 61169-54 RADIO-FREQUENCY CONNECTORS Part 54: Sectional Specification for Coaxial Connectors with 10mm inner of outer Conductor,nominal Characteristic Impedance 50 Ohms, Series 4.3- 10Public Comment
BS EN 61169-58 Radio-frequency connectors Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - characteristic impedance 50 ohm (type SBMA)null
BS EN 61169-58 Radio-frequency connectors Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - characteristic impedance 50 ohm (type SBMA)Accepted
BS EN 61196-1-110 Ed. 1.0 Coaxial communication cables Part 1-110: Electrical test methods - Test for continuityIdea
BS EN 61196-1-114 Ed. 1.0 Coaxial communication cables Part 1-114: Electrical test methods - InductanceAccepted
BS EN 61196-1-116 Ed. 1.0 Coaxial communication cables Part 1-116: Electrical test methods - Test for characteristic impedance with time domain reflectometry (TDR)Accepted
BS EN 61196-1-209 Ed. 1.0 Coaxial communication cables Part 1-209: Environmental test methods - Thermal cyclingAccepted
BS EN 61196-1-215 Ed1.0 Environmental test methods Part 1-215: High Temperature Cable AgeingAccepted
BS EN 61196-1-314 Ed2.0 Coaxial communication cables Part 1-314: Mechanical test methods - Test for bendingPublic Comment
BS EN 61196-10 Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polyterafluoroethylene (PTFE) dielectricApproval
BS EN 61196-10-1 Ed1.0 Coaxial Communication Cables Part 10-1: Blank detail specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectricPublication
BS EN 61196-11 Ed1.0 Coaxial communication cables Part 11: Sectional specification for semi-rigid cables with polyethylene (PE) dielectricPublic Comment
BS EN 61196-11-1 Ed.1 Coaxial communication cables Part 11-1: Blank detail specification for semi-rigid cables with polyethylene (PE) dielectricPublic Comment
BS EN 61196-4-1 Ed1.0 Coaxial communication cables Part 4-1: Blank detail specification for radiating cablesPublic Comment
BS EN 61196-9-1 Ed. 1.0 Coaxial communication cables Part 9-1: Blank detail specification for flexible RF coaxial cablesAccepted
BS EN 61207-2 Ed. 2.0 IEC 61207-2 Ed. 2.0 Expression of Performance of Gas Analyzers Part 2: Oxygen in Gas (utilizing high-temperature electrochemical sensors)Accepted
BS EN 61207-3 Ed. 3.0 IEC 61207-3 Ed. 3.0 Expression of Performance of Gas Analyzers Part 3: Paramagnetic oxygen analysersAccepted
BS EN 61207-6 Ed 2.0 Expression of Performance of Gas Analyzers- Part 6: Photometric analyzersApproval
BS EN 61285 Ed 3.0 Industrial Process Control - Safety of Analyzer HousesPublic Comment
BS EN 61515 Ed 2.0 Mineral insulated cables and thermocouplesPublic Comment
BS EN 61726 ED.2 Cable assemblies, cables, connectors and passive coponents - screening attentuation measurement by the reverberation chamber methodPublic Comment
BS EN 61770: 2009/prAA: 2014 Electric appliances connected to the water mains - Avoidance ofbacksiphonage and failure of hose-setsPublic Comment
BS EN 61883-6 Ed 2.0 /A1 Amendment 1 to IEC 61183-6: Consumer audio/video equipment - Digital interface Part 6: Audio and music data transmission protocol (TA4)Publication
BS EN 61935-1 Ed.4 TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH ISO/IEC 11801 Part 1: Installed cablingPublic Comment
BS EN 61935-2-21 Ed.1 Generic cabling systems — Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-21: Cord and work area cord category 6- Blank detail specificationPublic Comment
BS EN 61935-2-22 Ed.1 Generic cabling systems — Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-22: Cord and work area cord category 6A- Blank detail specificationPublic Comment
BS EN 61935-2-23 Ed.1 Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-23: Cord and work area cord category 7- Blank detail specificationPublic Comment
BS EN 61935-2-24 Ed.1 Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-24: Cord and work area cord category 7A- Blank detail specificationPublic Comment
BS EN 61935-2-25 Ed1.0 Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-25: Work area with M12 4 poles connectors Blank detail specificationAccepted
BS EN 61987-21 List of Properties (LOP) of process control valves for electronic data exchange - Generic structuresPublic Comment
BS EN 61987-22 Lists of Properties (LOP) of control valves and actuators for electronic data exchangePublic Comment
BS EN 61987-23 Industrial-Process Measurement and Control - Data Structures and Elements in Process Equipment Catalogues Part 23: List of Properties (LOP) of valve actuators for electronic data exchangePublic Comment
BS EN 61987-24-1 Industrial-Process Measurement and Control - Data Structures and Elements in Process Equipment Catalogues Part 24-1: List of Properties (LOP) of positioners for electronic data exchangePublic Comment
BS EN 62087 METHODS OF MEASUREMENT FOR THE POWER CONSUMPTION OF AUDIO, VIDEO ANDRELATED EQUIPMENTPublication
BS EN 62087-1 Methods of measurement for the power consumption of audio; video and related equipment Part 1: General (TA12)Public Comment
BS EN 62087-2 Methods of measurement for the power consumption of audio; video and related equipment Part 2: Media (TA12)Public Comment
BS EN 62087-3 Methods of measurement for the power consumption of audio; video and related equipment- Part 3: Television Sets (TA12)Public Comment
BS EN 62087-4 Methods of measurement for the power consumption of audio; video and related equipment Part 4: Video Recording Equipment (TA12)Public Comment
BS EN 62087-5 Methods of measurement for the power consumption of audio; video and related equipment Part 5: Set top boxes (TA12)Public Comment
BS EN 62087-6 Methods of measurement for the power consumption of audio; video and related equipment Part 6: Audio Equipment (TA12)Public Comment
BS EN 62104 Ed 3.0 Characteristics of DAB receivers (TA 1)Public Comment
BS EN 62106 Ed 3.0 Specification of the Radio Data System (RDS) for VHF/FM sound broadcasting in the frequency range from 87;5 to 108;0 MHz (TA 1)Public Comment
BS EN 62153-4-10 Ed2 Metallic Communication Cable Test Methods Part 4-10: Electromagnetic compatability (EMC) - Shielded screening attenuation test method for measuring the screening effectiveness of feed-throughs and electromagnetic gaskets double coaxial methodPublic Comment
BS EN 62153-4-7 Ed.2 Metallic Communication Cable test methods Part 4-7: Electromagnetic compatibility (EMC) - Shielded screening attenuation test method for measuring the Transfer impedance Zt and the screening attenuation aS or the Coupling attenuation aC of RF-Connectors and assemblies up to and above 3 GHz; Tube in Tube methodPublic Comment
BS EN 62216 Ed 2.0 Digital terrestrial television receivers for the DVB-T system (TA 1)Accepted
BS EN 62379-3 Common Control Interface for networked digital audio and video products Part 3: Video (TA 4)Public Comment
BS EN 62379-5-1 Common control interface for networked digital audio and video products Part 5-1: Transmission over networks - GeneralPublication
BS EN 62379-7 Common Control Interface for networked digital audio and video products Part 7: Measurements (TA 4)Public Comment
BS EN 62391-1 Fixed electric double-layer capacitors for use in electronic equipment - Part 1: Generic specificationApproval
BS EN 62634 Ed 2.0 Radio Data System (RDS) - Receiver products and characteristics - Methods of measurement (TA 1)Public Comment
BS EN 62680-1-1 Universal Serial Bus interfaces for data and power Part 1-1:Universal Serial Bus interfaces - common components - USB Battery Charging Specification; Revision 1.2 (TA 14)Public Comment
BS EN 62680-2-1 Universal Serial Bus interfaces for data and power Part 2-1: Universal Serial Bus Interfaces for data and power - Hi Speed USB 2.0 - Universal Serial Bus Specification; Revision 2.0 (TA 14)Public Comment
BS EN 62680-2-2 Universal Serial Bus interfaces for data and power Part 2-2: Universal Serial Bus interfaces for data and power - Hi-Speed 2.0 - Universal Serial Bus Micro-USB Cables and Connectors Specification; Revision 1.01 (TA14)Specification; Revision 1.01Public Comment
BS EN 62680-2-3 Universal Serial Bus interfaces for data and power Part 2-3: Universal Serial Bus interfaces for data and power - Hi Speed USB 2.0 - Universal Bus Cables and Connectors Class Document Revision 2.0Public Comment
BS EN 62702-2 Audio Archive System Part 2: Audio data preservation (TA6)Accepted
BS EN 62753 Digital Terrestrial Television Receivers for the DTMB systemPublic Comment
BS EN 62760 Audio reproduction method for normalized loudness level (TA11)Accepted
BS EN 62767 Air Interface Protocol for local multilingual broadcasting (TA 4)Public Comment
BS EN 62777 Quality evaluation method for the sound field of directional speaker array system (TA 11)Accepted
BS EN 62783-1Ed.1 TWINAX CABLES FOR DIGITAL COMMUNICATIONS - Part 1: GENERIC SPECIFICATIONPublic Comment
BS EN 62810 Ed.1 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rodsPublic Comment
BS EN 62812 Method of measurement of low resistanceAccepted
BS EN 62813 Electrical characteristics test methods of lithium ion capacitors for use in electric and electronic equipmentPublic Comment
BS EN 62827-1 Wireless Power Transfer - Management Part 1: Common ComponentsAccepted
BS EN 62828-1 industrial measurement transmittersAccepted
BS EN 62828-2 Reference conditions and procedures for industrial measurement transmitters Part 2: Specific procedures for pressure transmittersAccepted
BS EN 62828-3 Ed1.0 conditions and procedures for testingindustrial measurement transmitters - Part 3: Specific procedures for temperature transmittersPublic Comment
BS EN 62842 File allocation system with minimized reallocation for multimedia home server (TA8)Accepted
BS EN 62869 Activities and considerations related to Wireless Power Transfer (WPT) for audio; video and multimedia systems and equipment (TC 100)Publication
BS EN 62875 Printing specification of a texture map for auditory presentation of printed textsPublic Comment
BS EN 62889 IEC 62889 Ed.1: Digital video interface - Gigabit video interface (GVIF) for multimedia systems (TA 4)Public Comment
BS EN 62907 Use cases related to Ambient Assisted Living (AAL) in the field of audio; video and multimedia systems and equipmentApproval
BS EN 853 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - SpecificationTechnical Review
BS EN 854 Rubber hoses and hose assemblies - Textile reinforced hydraulic type - SpecificationTechnical Review
BS EN 856 Hose and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - SpecificationTechnical Review
BS EN 857 Hose and hose assemblies - Wire braid reinforced compact type for hydraulic applications - SpecificationTechnical Review
Opens a new windowBS EN 902 Chemicals used for treatment of water intended for human consumption - Hydrogen peroxidePublic Comment
Opens a new windowBS EN 938 Chemicals used for treatment of water intended for human consumption - Sodium chloritePublic Comment
Opens a new windowBS EN 939 Chemicals used for treatment of water intended for human consumption - Hydrochloric acidPublic Comment
BS EN 997:2012/A1 WC pans and WC suites with integral trapAccepted
BS EN CISPR 24 ED.2/A1 Information technology equipment - Immunity characteristics - Limits andmethods of measurementPublic Comment
BS EN IEC 60940/A1 AMD 1 Guidance information on the application of capacitors, resistors, inductors and complete filter units for radio interference suppressionnull
BS EN ISO 16701 Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solutionPublication
BS EN ISO 16900-1 Respiratory protection - Test methods part 1 : Inward leakage Part 1 : Inward leakagePublication
BS EN ISO 25377 Hydrometric uncertainty guidance (HUG)Accepted
BS EN ISO 6806 Plastic hoses and hose assemblies for suction and low- pressure discharge of petroleum liquids - Specification (ISO/FDIS 6808:2014)Publication
BS EN ISO 7441 Corrosion of metals and alloys - Determination of bimetallic corrosion in outdoor exposure corrosion testsPublication
BS EN ISO 8044:2000 +A1 Corrosion of metals and alloys - Basic terms and definitionsPublic Comment
BS EN ISO/IEC 60079-13 IEC 60079-13 Explosive atmospheres Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"Public Comment
BS EN WI 00230285 Water quality – Guidance standard on determining the degree of modification of lake hydromorphologyIdea
BS EN WI 00230310 Water quality - Environmental requirements of freshwater pearl mussel Margaritifera MargaritiferaIdea
BS EN WI 00262288 Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)Idea
Opens a new windowBS EN WI 16772 for sampling invertebrates in the hyporheic zone of riversPublic Comment
BS EN55032 CORR2 Electromagnetic compatibility of multimedia equipment. EmissionrequirementsPublication
BS ENISO 10484 Fasteners - Widening test on nutsPublic Comment
BS ENISO 10664 bolts and screwsApproval
BS ENISO 11074 Soil quality - VocabularyApproval
BS ENISO 11145 Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbolsPublic Comment
BS ENISO 11151-1 Lasers and laser-related equipment - Standard optical components Part 1: Components for the UV, visible and near-infrared spectral rangesTechnical Review
BS ENISO 11151-2 Lasers and laser-related equipment - Standard optical components Part 2: Components for the infrared spectral rangeTechnical Review
BS ENISO 11303 Guidelines for selection of protection methods against atmospheric corrosionAccepted
BS ENISO 11810 Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignitionPublic Comment
BS ENISO 13694 and laser-related equipment - Test methods for laser beam power (energy) density distributionPublic Comment
BS ENISO 15009 Soil quality - Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons - Purge-and-trap method with thermal desorptionPublic Comment
BS ENISO 16198 Soil quality - Plant-based biotest to assess the environmental bioavailability of trace elements to plantsPublication
BS ENISO 16558-1 Soil quality - Risk based petroleum hydrocarbons Part 1: Determination of aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method)Public Comment
BS ENISO 16558-2 Soil quality - Risk-based petroleum hydrocarbons Part 2: Determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionisation detection (GC/FID)Public Comment
BS ENISO 17294-2 inductively coupled plasma mass spectrometry (ICP-MS) Part 2: Determination of 62 elements including uranium isotopesPublic Comment
Opens a new windowBS ENISO 17943 Water quality - Determination of easily volatile organic compounds in water - Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS)Public Comment
BS ENISO 18635 short-chain polychlorinated alkanes (SCCPs) in sediment and suspended (particulate) matter - Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI)Accepted
BS ENISO 22155 Soil quality - Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers - Static headspace methodPublic Comment
BS ENISO 2320 Fasteners - Prevailing torque type steel nuts - Mechanical and performance propertiesPublic Comment
BS ENISO 28017:2011/Amd 1 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification - Amendment 1Approval
BS ENISO 28721-4 Vitreous and porcelain enamels - Glass-lined apparatus for process plants Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittingsIdea
BS ENISO 6134 saturated steam - SpecificationAccepted
BS ENISO 6509-2 Determination of dezincification resistance of copper alloys with zinc Part 2: Acceptance criteriaPublic Comment
BS ENISO 6802 assemblies with wire reinforcements - Hydraulic impulse test with flexingAccepted
BS ENISO 7027-1 Water quality - Determination of turbidityPublic Comment
BS ENISO 7539-10 Corrosion of metals and alloys -- Stress corrosion testing - Part 10: Reverse U-bend methodPublication
BS ENISO 7539-11 Corrosion of metals and alloys -- Stress corrosion cracking - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted crackingPublication
BS ENISO 8044 terms and definitionsPublic Comment
BS ENISO 9308-1 Water quality - Detection and enumeration of Escherichia coli and coliform bacteria Part 1: Membrane filtration methodPublication
BS IEC 60050-726 Ed2.0 IEC 60050-726. International electrotechnical vocabulary. Transmissionlines and waveguidesPublic Comment
BS IEC 60393-2 Potentiometers for use in electronic equipment. Part 2: Sectional specification: Lead-screw actuated and rotary preset potentiometersPublic Comment
BS IEC 60393-5 Potentiometers for use in electronic equipment. Part 5: Sectional specification - Single-turn rotary low-power wirewound and non-wirewound potentiometersPublic Comment
BS IEC 60393-6 Potentiometers for use in electronic equipment. Part 6: Sectional specification - Surface mount preset potentiometersPublic Comment
BS IEC 62153-4-15 Ed.1 Metallic Communication Cable test methods Part 4-15: Electromagnetic compatibility (EMC) – Test method for measuring transfer impedance and screening attenuation – or coupling attenuation with Triaxial CellPublic Comment
BS ISO 10110-19 Optics and photonics - Preparation of drawings for optical elements and systems Part 18: Freeform surfacesPublic Comment
BS ISO 10110-5 Optics and photonics - Preparation of drawings for optical elements and systems Part 5: Surface form tolerancesPublic Comment
BS ISO 10110-6 Optics and optical instruments - Preparation of drawings for optical elements and systems Part 6: Centring tolerancesPublication
BS ISO 10110-9 Optics and photonics - Preparation of drawings for optical elements and systems Part 9: Surface treatment and coatingAccepted
BS ISO 10253 Water quality - Marine algal growth inhibition test with Skeletonema costatum and Phaeodactylum tricornutumAccepted
BS ISO 11268-3 Soil quality - Effects of pollutants on earthworms Part 3: Guidance on the determination of effects in field situationsApproval
BS ISO 11504 Soil quality - Assessment of impact from soil contaminated with petroleum hydrocarbonsAccepted
BS ISO 11657 Hydrometry — Suspended sediment in streams and canals — Determination of concentration by surrogate techniquesPublication
BS ISO 11731 Water quality - Enumeration of LegionellaAccepted
BS ISO 11759 Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) - SpecificationPublication
BS ISO 12853 Microscopes - Information provided to the userPublic Comment
BS ISO 13142 Electro-optical systems - Cavity ring-down technique for high-reflectance measurementPublic Comment
BS ISO 13363 Rubber and plastics hoses for marine-engine wet-exhaust systems - SpecificationPublic Comment
BS ISO 13775-1 Thermoplastic tubing and hoses for automotive use Part 1: Non-fuel applicationsPublic Comment
BS ISO 13775-2 Thermoplastic tubing and hoses for automotive use Part 2: Petroleum-based-fuel applicationsAccepted
BS ISO 13843 Water quality - Requirements for establishing performance characteristics of quantitative microbiological methodsAccepted
BS ISO 13913 Soil quality — Determination of selected phthalates using capillary gas chromatography with mass spectrometric detection (GC/MS)Publication
BS ISO 14132-1 Optics and photonics - Vocabulary for telescopic systems Part 1: General terms and alphabetical indexes of terms in ISO 14132Public Comment
BS ISO 14132-2 Optics and photonics - Vocabulary for telescopic systems Part 2: Terms for binoculars, monoculars and spotting scopesPublic Comment
BS ISO 14132-3 Optics and optical instruments - Vocabulary for telescopic systems Part 3: Terms for telescopic sightsApproval
BS ISO 14135-1 Optics and optical instruments - Specifications for telescopic sights Part 1: General-purpose instrumentsPublication
BS ISO 14135-2 Optics and optical instruments - Specifications for telescopic sights Part 2: High-performance instrumentsPublication
BS ISO 14490-3 Optics and optical instruments - Test methods for telescopic systems Part 3: Test methods for telescopic sightsAccepted
BS ISO 14490-5 Optics and optical instruments - Test methods for telescopic systems Part 5: Test methods for transmittancePublic Comment
BS ISO 14490-5:2005/Amd 1 Optics and optical instruments - Test methods for telescopic systems Part 5: Test methods for transmittance - Amendment 1Public Comment
BS ISO 14490-6 Optics and optical instruments - Test methods for telescopic systems Part 6: Test methods for veiling glare indexApproval
BS ISO 14869-3 Soil quality - Dissolution for the determination of total element content Part 3: Dissolution with hydrofluoric and nitric acids using pressurised microwave techniqueAccepted
BS ISO 14880-1 Optics and photonics - Microlens arrays Part 1: VocabularyAccepted
BS ISO 14999-4 Optics and photonics - Interferometric measurement of optical elements and optical systems Part 4: Interpretation and evaluation of tolerances specified in ISO 10110Public Comment
BS ISO 15257 Corrosion of metals and alloys - Competence levels and certification of cathodic protection personnelPublic Comment
BS ISO 16228 Fastners - Certificates - Test reportsAccepted
BS ISO 16301 Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for hydraulic jacks applications - SpecificationAccepted
BS ISO 16308 Water quality — Determination of glyphosate and AMPA — Method using high performance liquid chromatography (HPLC) with tandem mass spectrometric detectionPublication
BS ISO 16331-1 Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments Part 1: Performance of handheld laser distance metersAccepted
BS ISO 16540 Corrosion of metals and alloys - Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend methodPublic Comment
BS ISO 16751-1 Soil quality - Environmental availability of non-polar organic compounds Part 1: Determination of potential availability using a strong absorbent or complexing agentIdea
BS ISO 16778 Water quality - Calanoid copepod development test with Acartia tonsaPublic Comment
BS ISO 16780 Water Quality - Determination of polychlorinated naphthalenes (PCN) - Method using gas chromatography (GC) and mass spectrometry (MS)Public Comment
BS ISO 16900-10 Respiratory protective devices - Methods of test and test equipment Part 10: Resistance to flame (including sparks) and flame engulfment of facepiece and other components including body harness, filtersPublic Comment
BS ISO 16900-12 Respiratory protective devices - Methods of test and test equipment Part 12: Leak test methodsApproval
BS ISO 16900-13 Respiratory protective devices - Methods of test and test equipment Part 13: RPD using regenerated breathable gas and special application mining escape RPD: Consolidated test for gas concentration, temperature, humidity, work of breathing, breathing resistance and durationPublic Comment
BS ISO 16900-14 Respiratory protective devices - Methods of test and test equipment Part 14: Measurement of sound levelPublic Comment
BS ISO 16900-5 Respiratory protective devices - Methods of test and test equipment Part 5: Test Equipment: Breathing machine, simulator, dummy heads and torso, toolsAccepted
BS ISO 16900-6 Respiratory protective devices - Methods of test and test equipment Part 6: Mechanical resistance/strength of componentsPublic Comment
BS ISO 16900-7 Respiratory protective devices - Methods of test and test equipment Part 7: Practical performance test methodPublic Comment
BS ISO 16900-8 Respiratory protective devices - Methods of test and test equipment Part 8: Climatic conditioningPublic Comment
BS ISO 16900-9 Respiratory protective devices - Methods of test and test equipment Part 9: Determination of the carbon dioxide content of inhaled airPublic Comment
BS ISO 16975-1 Respiratory protective devices Part 1: Selection, use and maintenancePublic Comment
BS ISO 17093 Corrosion of Metals and Alloys - Guidelines for corrosion test by electrochemical noise measurementsPublic Comment
BS ISO 17182 Soil quality - Determination of some selected phenols and chlorophenols - Gas chromatographic method with mass spectrometric detectionPublic Comment
BS ISO 17183 Soil quality - Screening soils for alcohol-extracted organic compounds by turbidity analysisAccepted
BS ISO 17183 Soil quality - Screening soils for isopropanol-extractable organic compounds by determining emulsification index by light attenuationAccepted
BS ISO 17224 Corrosion of metals and alloys - Test method for high-temperature corrosion testing of metallic materials by coating with salt, ash, or other inorganic solidsApproval
BS ISO 17244 Water quality - Bio-indicator of potential toxicity in aqueous media - Determination of the potential toxicity of aqueous samples on bivalve embryo-larval developmentApproval
BS ISO 17245 Corrosion of metals and alloys - Test method for high-temperature corrosion testing of metallic materials by immersing in molten salt or other inorganic liquidsApproval
BS ISO 17248 Corrosion of metals and alloys - Test method for high-temperature corrosion testing of metallic materials by embedding in salt, ash, or other inorganic solidsApproval
BS ISO 17324 Rubber hoses for automotive turbochargers - SpecificationPublication
BS ISO 17328 Optics and photonics - Optical materials and components - Test method for refractive index of infrared optical materialsPublication
BS ISO 17420-1 Respiratory protective devices - Performance requirements Part 1: Supplied breathable gas devicesAccepted
BS ISO 17420-2 Respiratory protective devices - Performance requirements Part 2: Filtering devicesAccepted
BS ISO 17586 Soil quality - Assessment of the bioavailability - Extraction of metals using 0,43 mol/l nitric acid solutionPublic Comment
BS ISO 17601 Soil quality - Method to quantify the abundance of microbial communities from soil DNA extractsPublic Comment
BS ISO 17690 Water quality - Determination of free cyanide using flow injection analysis (FIA), gas-diffusion and amperometric detectionPublic Comment
BS ISO 17722 Water quality - Measurement of colored dissolved organic matter (CDOM) with fluorescence excitation-emission mapping (EEM)Accepted
BS ISO 17901-1 Optics and photonics - Holography Part 1: Methods of measuring diffraction efficiency and associated optical characteristics of hologramsPublic Comment
BS ISO 17901-2 Optics and photonics - Holography Part 2: Methods for measurement of hologram recording characteristicsPublic Comment
BS ISO 17918 Evaluation of selective corrosion of alloys by visual inspection and hardness measurementPublic Comment
BS ISO 17924 Soil quality - Assessment of human exposure from ingestion of soil and soil material - Guidance on the application and selection of physiologically based extraction methods for the estimation of the human bioaccessibility/bioavailability of metals inIdea
BS ISO 17951-1 Water quality - Determination of fluoride using flow analysis (FIA and CFA) Part 1: Method using flow injection analysis (FIA) and spectrometric detectionAccepted
BS ISO 17951-2 Water quality - Determination of fluoride using flow analysis (FIA and CFA) Part 2: Method using continuous flow analysis (CFA)Accepted
BS ISO 18069 Corrosion of metals and alloys - Method for determination of the uniform corrosion rate of stainless steels and nickel based alloysPublic Comment
BS ISO 18070 Corrosion of metals and alloys - Crevice corrosion formers for flat specimens or tubes of stainless steels in corrosive solutionsPublic Comment
BS ISO 18086 Corrosion of metals and alloys - Determination of AC corrosion protection criterion from coupon current densitiesApproval
BS ISO 18089 Corrosion of metals and alloys - Determination of the electrochemical critical crevice temperature (ECCT) for stainless steels under potentiostatic controlPublic Comment
Opens a new windowBS ISO 18187 Soil quality - Quality of solid samples - Solid contact test using the dehydrogenase activity of Arthrobacter globiformisPublic Comment
BS ISO 18191 Water quality - Determination of pH in sea water - Method using the indicator dye m-cresol purplePublic Comment
BS ISO 18220 Water quality - Larval development test with the harpacticoid copepod Nitocra spinipesAccepted
BS ISO 18221 Microscopes - Microscopes with digital imaging displays - Information provided to the user regarding imaging performanceAccepted
BS ISO 1823.2 Rubber hose assemblies for oil suction and discharge service - SpecificationPublic Comment
Opens a new windowBS ISO 18311 Soil quality - Method for testing effects of soil contaminants on the feeding activity of soil dwelling organisms - Bait-lamina testPublic Comment
BS ISO 18400-101 Soil quality - Sampling Part 101: Framework for the preparartion and application of a sampling planAccepted
BS ISO 18400-102 Soil quality - Sampling Part 102: Selection and application of sampling techniquesAccepted
BS ISO 18400-103 Soil quality - Sampling Part 103: SafetyAccepted
BS ISO 18400-104 Soil quality - Sampling Part 104: Strategies and statistical evaluationsIdea
BS ISO 18400-105 Soil quality - Sampling Part 105: Package, transport, storage, preservationAccepted
BS ISO 18400-106 Soil quality - Sampling Part 106: Quality control and quality assuranceAccepted
BS ISO 18400-107 Soil quality - Sampling Part 107: Recording and reportingAccepted
BS ISO 18400-201 Soil quality - Sampling Part 201: Pretreatment in the fieldAccepted
BS ISO 18400-202 Soil quality - Sampling Part 202: Preliminary investigationsIdea
BS ISO 18400-203 Soil quality - Sampling Part 203: Investigation of potentially contaminated sitesIdea
BS ISO 18400-204 Soil quality - Sampling Part 204: Guidance on sampling of soil gasIdea
BS ISO 18504 Soil quality - Guidance on sustainable remediationIdea
Opens a new windowBS ISO 18763 Determination of the toxic effects of pollutants on germination and early growth of higher plantsPublic Comment
BS ISO 18897 Corrosion of metals and alloys - Standard test method for erosion - Corrosion of metallic materials by Jetin-slitAccepted
BS ISO 1891-4 Fasteners - Terminology Part 4: Controls, inspection, delivery, acceptance and qualityAccepted
BS ISO 19012-3 Microscopes - Designation of microscope objectives Part 3: Spectral transmittanceApproval
BS ISO 19013-2 Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification Part 2: Gasoline fuelsPublic Comment
BS ISO 19040-1 Water quality - Determination of the estrogenic potential of water and waste water Part 1: Yeast estrogen screen (Saccharomyces cerevisiae)Idea
BS ISO 19040-2 Water quality - Determination of the estrogenic potential of water and waste water Part 2: Yeast estrogen screen (Arxula adeninivorans)Idea
BS ISO 19040-3 Water quality - Determination of the estrogenic potential of water and waste water Part 3: In vitro human cell-based reporter gene assayIdea
BS ISO 19055 Microscopes - Minimum requirements for binocular tubesAccepted
BS ISO 19056-1 Microscopes - Definition and measurement of illumination properties Part 1: Image brightness and uniformity in bright field microscopyAccepted
BS ISO 19097 Corrosion of metals and alloys - Accelerated life test method of mixed metal oxide anodes for cathodic protectionIdea
BS ISO 19204 Soil quality - Procedure for site-specific ecological risk assessment of soil contamination (TRIAD approach)Accepted
BS ISO 19280 Measurement of crevice corrosion temperature for cylindrical crevice geometriesAccepted
BS ISO 19340 Water quality - Determination of dissolved perchlorate - Method using ion chromatography (IC)Idea
BS ISO 19718 Rubber and plastics hoses and hose assemblies, wire- or textile- reinforced, for hydraulic power units used in hydraulic tool applications - SpecificationAccepted
BS ISO 19820 Water quality - Determination of the acute toxicity to the marine rotifer Brachionus plicatilisAccepted
BS ISO 19827 Water quality - Determination of the acute toxicity to the freshwater rotifer Brachionus calyciflorusAccepted
BS ISO 21044-1 Manual on stream gauging Part 1: FieldworkPublic Comment
BS ISO 21044-2 Manual on stream gauging Part 2: Computation of dischargePublic Comment
BS ISO 21207 Corrosion tests in artificial atmospheres - Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and dryingPublic Comment
BS ISO 27126 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - SpecificationPublication
BS ISO 3269 Fasteners - Acceptance inspectionIdea
BS ISO 4759-3 Tolerances for fasteners Part 3: Plain washers for bolts, screws and nuts - Product grades A and CAccepted
BS ISO 5667-12 Water quality - Sampling Part 12: Guidance on sampling of bottom sedimentsAccepted
BS ISO 5667-14 Water quality - Sampling Part 14: Guidance on quality assurance of environmental water sampling and handlingPublication
BS ISO 5667-16 Water quality - Sampling Part 16: Guidance on biotesting of samplesAccepted
BS ISO 5667-24 Water quality - Sampling Part 24: Guidelines for the auditing of water quality samplingAccepted
BS ISO 5667-4 Water quality - Sampling Part 4: Guidance on sampling from lakes, natural and man-madeAccepted
BS ISO 5772 Rubber hoses and hose assemblies for measured fuel dispensing - SpecificationPublic Comment
BS ISO 7393-2 Water quality - Determination of free chlorine and total chlorine Part 2: Colorimetric method using N,N-diethyl-1,4-phenylenediamine, for routine control purposesAccepted
BS ISO 8037-2 Optics and optical instruments - Microscopes - Slides Part 2: Quality of material, standards of finish and mode of packagingPublic Comment
BS ISO 8039 Microscopes - Values, tolerances and symbols for magnificationApproval
BS ISO 8199 Water quality - General guidance on the enumeration of micro-organisms by cultureAccepted
BS ISO 8600-2 Optics and optical instruments - Medical endoscopes and endoscopic accessories Part 2: Particular requirements for rigid bronchoscopesPublic Comment
BS ISO 9022-2 Optics and optical instruments - Environmental test methods Part 2: Cold, heat and humidityApproval
BS ISO 9022-20 Optics and optical instruments - Environmental test methods Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfideApproval
BS ISO 9022-3 Optics and photonics - Environmental test methods Part 3: Mechanical stressPublic Comment
BS ISO 9022-4 Optics and optical instruments - Environmental test methods Part 4: Salt mistApproval
BS ISO 9022-6 Optics and photonics - Environmental test methods Part 6: DustPublic Comment
BS ISO 9022-7 Optics and photonics - Environmental test methods Part 7: Resistance to drip or rainPublic Comment
BS ISO 9022-8 Optics and photonics - Environmental test methods Part 8: High pressure, low pressure, immersionPublic Comment
BS ISO 9227 Corrosion tests in artificial atmospheres - Salt spray testsAccepted
BS ISO/TS 18340 Endotherapy devices - Eyepiece funnel and light guide connectorAccepted
BSEN 55035 Electromagnetic Comptibility (EMC) - Immunity standard for multimedia pr oductsApproval
PD CEN/TR 13737-2 Gas infrastructure - Implementation Guide for Functional Standards prepared by CEN/TC 234 Part 2: National Pages related to CEN/TC 234 standardsApproval
PD CEN/TS 16692 Water quality - Determination of tributyl tin (TBT) in whole water samplesPublication
PD CEN/TS 16800 Validation of analytical methodsAccepted
PD CENISO/TS 29843-1 microbial diversity Part 1: Method by phospholipid fatty acid analysis (PLFA) and phospholipid ether lipids (PLEL) analysisPublication
PD CENISO/TS 29843-2 microbial diversity Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction methodPublication
PD CLC/TR 60079-32-1 Explosive atmospheres Part 32-1: Electrostatic Hazards - GuidancePublication
PD CLC/TR 60079-33 Explosive atmospheres Part 33: Equipment protection by special protection 's'Publication
PD IEC/TR 61156-1-2:2009+A1 symmetrical pair/quad cables for digital communications Part 1-2: Electrical transmissoin characteristics and test methods of symmetrical pair/quad cablesApproval
PD IEC/TR 61156-1-6 Ed1.0 pair/quad cables for digital communications Part 1-6: Exploratory DC-resistance values of floor-wiring and work-area cables for digital communicationsAccepted
PD IEC/TR 62153-4-16 Ed1.0 METALLIC COMMUNICATION CABLE TEST METHODS Part 4-16: Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-upApproval
PD IEC/TR 62921 Ed 1.0 Quantification Methodology For Greenhouse Gas Emissions For Computers And MonitorsApproval
PD IEC/TS 60079-32-1 Ed 1.0 /A1 Amendment 1: Explosive atmospheres Part 32-1: Electrostatic hazards; guidanceAccepted
PD IEC/TS 60079-40 Ed 1.0 Explosive atmospheres - Requirements for Process Sealing Between Flammable or Combustible Process Fluids and Electrical SystemsAccepted
PD IEC/TS 62153-4-1 Metallic communication cable test methods Part 4-1: Introduction to Electromagnetic (EMC) Test MethodsPublication
PD IEC/TS 62871-1 Ed 1.0 Professional video strage products - Tape less camera recorder using MXF file format - Encoding guidelines Part 1: MXF Operational Pattern (TA6)Approval
PD ISO/TR 16203 Corrosion of metals and alloys - Guidelines for selection of methods for erosion-corrosion testing in flowing liquidsPublication
PD ISO/TR 19735 Corrosion of metals and alloys - Corrosivity of atmospheres - Guidelines for mapping areas of increased risk of corrosionIdea
PD ISO/TR 9212 Hydrometry - Methods of measurement of bedload dischargeAccepted
PD ISO/TS 18339 Endotherapy devices - Trocar pins, trocar sleeves and endotherapy devices for use with trocar sleevesAccepted
PD ISO/TS 19620 Water quality - Determination of four chemical arsenic species - Method using high-pressure liquid chromatography (HPLC) with inductively coupled plasma mass spectrometry (ICP-MS)Accepted

[ back to top ]

Committees (41)

Sort by: Reference | Name

Committee ReferenceTitle
B/505/9"Concrete Pipes, Fittings And Ancillary Concrete Products"
B/505/4"Manhole Covers, Surface Boxes And Other Road Fittings"
EPL/100Audio, video and multimedia systems and equipment
EH/3/5Biological Methods
EPL/46Cables, wires and waveguides, radio frequency connectors and accessories for communication and signalling
EPL/40XCapacitors and resistors for electronic equipment
CII/59Chemicals for drinking water treatment
B/505/2Clay Pipes
EXL/31/3Codes of practice
ISE/NFE/8Corrosion of metals and alloys
B/505/8Drainage Separators And Interceptors
B/505/22Drainage Systems Outside Buildings
EH/6Effects of materials on water quality
GEL/65/2Elements of systems
GEL/210/11EMC product standards
EXL/31Equipment for explosive atmospheres
FME/9Fasteners
B/505/5Fibre Cement Pipes (Pressure And Non-Pressure)
GSE/33Gas supply
B/505/1General Requirements For Pipes And Fittings
B/504/-/10Hot & Cold Water Storage
CPI/113Hydrometry
CPI/30Measurement of fluid flow in closed conduits
EH/3/4Microbiological methods
CPW/172Optics and Photonics
EH/3/2Physical chemical and biochemical methods
PH/4Respiratory protection
B/505/21Roof Drainage And Sanitary Pipework
PRI/66Rubber and plastics tubing, hoses and hose assemblies
CPL/61Safety of household and similar electrical appliances
EH/3/6Sampling (of technical committee EH/3 - Water quality)
B/503Sanitary appliances
B/504/-/8Sanitary tapware
EH/4Soil quality
B/505/11Waste Fittings For Sanitary Appliances
B/505Wastewater engineering
B/505/40Wastewater Treatment Plants
EH/3Water quality
B/504Water supply
B/504/2Water Supply - Internal systems and components
B/504/-/13Water treatment equipment

[ back to top ]

Recently Viewed
Need Help?

We are here to help you with any queries. Email us for help.

But first, why not view the Help Pages?