Skip to content
RSS feed for this category

General

Standards in development (124)

Sort by: Title | Status

Standard TitleStatus
BS 1363-1 13 A plugs, socket outlets, adaptors and connection units Part 1: Specification for rewirable and non-rewirable 13 A fused plugsAccepted
BS 1363-2 13 A plugs, socket outlets, adaptors and connection units Part 2: Specification for 13 A switched and unswitched socket-outletsPublic Comment
BS 1363-3 13 A plugs, socket-outlets, adaptors and connection units Part 3: Specification for adaptorsPublic Comment
BS 1363-4 13 A plugs, socket-outlets, adaptors and connection units Part 3: Specification for 13 A fused connection units switched and unswitchedPublic Comment
BS 1363-5 13 A plugs, socket-outlets, adaptors and connection units Part 3: Specification for 13 A fused connection units switched and unswitchedPublic Comment
BS 8546 Multiple or simple travel adaptors with compatibility with UK plug andsocket system - SpecificationApproval
BS EN 12574-1 Stationary waste containers Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and designPublic Comment
BS EN 12574-2 Stationary waste containers Part 2: Performance requirements and test methodsPublic Comment
BS EN 12574-3 Stationary waste containers Part 3: Safety and health requirementsPublic Comment
BS EN 12574-4 Stationary waste containers Part 4: Waste-MechatronicsPublic Comment
BS EN 14405 Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions)Public Comment
BS EN 14582 Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methodsTechnical Review
BS EN 15308 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detectionPublic Comment
BS EN 15433-6 Transportation loads - Measurement and evaluation of dynamic mechanical loads Part 6: Automatic recording systems for measuring randomly occurring shock during monitoring of transportsAccepted
Opens a new windowBS EN 16170 Sludge, treated biowaste and soil — Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES)Approval
BS EN 16171 Sludge, treated biowaste and soil — Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS)Approval
BS EN 16175-1 Sludge, treated biowaste and soil — Determination of mercury — Part 1: Cold-vapour atomic absorption spectrometry (CV-AAS)Approval
BS EN 16175-2 Sludge, treated biowaste and soil — Determination of mercury — Part 2: Cold-vapour atomic fluorescence spectrometry (CV-AFS)Approval
BS EN 16250-1 Levels of performance and acceptance for street cleaning and municipal waste management services Part 1: General requirementsPublication
BS EN 16403 Waste management - Waste visual elementsApproval
BS EN 16887 Leather - Product Category Rules (PCR) for Environmental Impact AssessmentPublic Comment
BS EN 50066 Mini-couplers for the interconnection of electrical mains supplied equipment in road vehiclesPublic Comment
BS EN 60669-1 ED 4.0 Switches for household and similar fixed-electrical installations Part 1: General requirementsPublic Comment
BS EN 60669-2-1:2004+A2:2015 Switches for household and similar fixed electrical installations Part 2-1: Particular requirements - Electronic switchesPublication
BS EN 60669-2-5 ED 1.0 Switches for household and similar fixed electrical installations - Part 2-5: Switches and related accessories for use in home and building electronic systems (HBES)Publication
BS EN 60884-2-5 Ed 2.0 for household and similar purposes – Part 2-5: Particular requirements for adaptorsAccepted
BS EN 61058-1 Switches for appliances - Part 1: General requirementsApproval
BS EN 61058-1-1 Switches for appliances - Part 1-1: Requirements for mechanical switch constructionsApproval
BS EN 61058-1-2 Switches for appliances - Part 1-2: Requirements for electronic switch constructionsApproval
BS EN 61058-2-6 Switches for appliances - Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools, transportable tools and lawn and garden machinery.Public Comment
BS EN 61242:1997+A1:2008+A2 Electrical accessories – cable reels for household and similar purposesPublication
BS EN 61995-1:2008+A1 Devices for the connection of luminaires for household and similar purposes Part 1: General requirementsPublic Comment
BS EN 61995-2:2009+A1 Devices for the connection of luminaires for household and similar purposes Part 2: Standard sheets for DCLPublic Comment
BS EN 62962 ed1.0 Particular requirements for load-shedding equipment (LSE)Idea
BS EN 62991 Particular requirements for switching equipment to control power sources(SECPS)Idea
BS EN 63044-1 General requirements for Home and Building Electronic Systems (HBES) andBuilding Automation and Control Systems (BACS) - Part 1: General requirementsIdea
BS EN 63044-3 Home and Building Electronic Systems (HBES) andBuilding Automation and Control Systems (BACS) - Part 3: Electrical safety requirementsIdea
BS EN 63044-5-1 Home and Building Electronic Systems (HBES) andBuilding Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-upIdea
BS EN 63044-5-2 Home and Building Electronic Systems (HBES) andBuilding Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light industry environmentIdea
BS EN 63044-5-3 Home and Building Electronic Systems (HBES) andBuilding Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industry environmentIdea
BS ENISO 10734 Footwear - Test methods for slide fasteners - Strength of slide fastener pullersApproval
BS ENISO 10750 Footwear - Test method for slide fasteners - Attachment strength of end stopsApproval
BS ENISO 10751 Footwear - Test method for slide fasteners - Resistance to repeated opening and closingApproval
BS ENISO 10764 Footwear - Test method for slide fasteners - Lateral strength (ISO 10764)Approval
BS ENISO 13355 Packaging - Complete, filled transport packages and unit loads - Vertical random vibration testPublic Comment
BS ENISO 1421 Determination of tensile strength and elongation at breakPublic Comment
BS ENISO 17075-1 Leather - Chemical determination of chromium(VI) content – Part 1: Colorimetric method (EN ISO 17075:2007 rev )Public Comment
BS ENISO 17075-2 chromium(VI) content Part 2: Ion chromatographic methodPublic Comment
BS ENISO 17229 Leather - Physical and mechanical tests - Determination of water vapour absorptionPublication
BS ENISO 17232 Leather - Physical and mechanical tests - Determination of heat resistance of patent leather (ISO 17232:2006) (EN ISO 17232:2006 rev)Public Comment
BS ENISO 17233 Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings (ISO 17233:2002) (EN ISO 17233:2002 rev)Public Comment
BS ENISO 17236 Leather - Physical and mechanical tests - Determination of extension setPublication
BS ENISO 17694 Footwear - Test methods for uppers and lining - Flex resistanceApproval
BS ENISO 17697 Footwear - Test methods for uppers, lining and insocks - Seam strengthApproval
BS ENISO 17698 Footwear - Test methods for uppers - Delamination resistanceApproval
BS ENISO 17701 Footwear - Test methods for uppers, lining and insocks - Colour migrationApproval
BS ENISO 17708 Footwear - Test methods for whole shoe - Upper sole adhesionPublic Comment
BS ENISO 18403 Footwear - Test methods for slide fasteners - Resistance to damage during closure under a lateral forceApproval
Opens a new windowBS ENISO 18454 Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwearPublic Comment
Opens a new windowBS ENISO 18896 Footwear - Test methods for shanks - Longitudinal stiffnessPublic Comment
BS ENISO 19070 of N-methylpyrrolidone in leatherPublication
BS ENISO 19071 of Cr(VI) and its reductive potential for chromium tanning agentsPublication
BS ENISO 19076 - Using electronic techniquesApproval
BS ENISO 20136 by micro-organismsPublic Comment
BS ENISO 20137 testing critical chemicals in leatherPublic Comment
BS ENISO 20863 Footwear - Test methods for stiffeners and toepuffs - BondabilityPublic Comment
Opens a new windowBS ENISO 20866 Footwear - Test methods for insoles - Delamination resistancePublic Comment
Opens a new windowBS ENISO 20867 Footwear - Test methods for insoles - Heel pin holding strengthPublic Comment
Opens a new windowBS ENISO 20870 Footwear - Ageing conditioningPublic Comment
Opens a new windowBS ENISO 20871 Footwear - Test methods for outsoles - Abrasion resistancePublic Comment
Opens a new windowBS ENISO 20872 Footwear - Test methods for outsoles - Tear strengthPublic Comment
Opens a new windowBS ENISO 20873 Footwear - Test methods for outsoles - Dimensional stabilityPublic Comment
Opens a new windowBS ENISO 20874 Footwear - Test methods for outsoles - Needle tear strengthPublic Comment
Opens a new windowBS ENISO 20875 Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistancePublic Comment
Opens a new windowBS ENISO 20876 Footwear - Test methods for insoles - Resistance to stitch tearPublic Comment
BS ENISO 22649 Footwear - Test methods for insoles and insocks - Water absorption and desorptionApproval
Opens a new windowBS ENISO 22650 Footwear - Test methods for whole shoe - Heel attachmentPublic Comment
BS ENISO 2286-1 Determination of roll characteristics Part 1: Methods for determination of length, width and net massPublic Comment
BS ENISO 2286-2 Determination of roll characteristics Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substratePublic Comment
BS ENISO 2286-3 Determination of roll characteristics Part 3: Method for determination of thicknessPublic Comment
BS ENISO 23910 Leather - Physical and mechanical tests - Measurement of stich tear resistancePublic Comment
BS ENISO 2411 Determination of coating adhesionAccepted
BS ENISO 2417 Leather - Physical and mechanical tests - Determination of the static absorption of waterPublication
BS ENISO 2418 Leather - Chemical, physical and mechanical and fastness tests - Sampling location (ISO 2418:2002) (EN ISO 2418:2002 rev)Public Comment
BS ENISO 2420 Leather - Physical and mechanical tests - Determination of apparent density (ISO 2420:2002) (EN ISO 2420:2002 rev)Public Comment
BS ENISO 2589 Leather - Physical and mechanical tests - Determination of thicknessPublication
BS ENISO 3377-2 Leather - Physical and mechanical tests - Determination of tear load Part 2: Double edge tearPublication
BS ENISO 4044 chemical test samplesPublic Comment
BS ENISO 4098 of water-soluble matter, water-soluble inorganic matter and water-soluble organic matterPublic Comment
BS ENISO 4674-1 Determination of tear resistance Part 1: Constant rate of tear methodsPublic Comment
BS ENISO 5402-1 Leather - Determination of flex resistance Part 1: Flexometer method (ISO 5402-1:2011) (EN ISO 5402-1:2011 rev)Public Comment
BS ENISO 5470-1 Determination of abrasion resistance Part 1: Taber abraderPublic Comment
BS ISO 11457 Leather - Grading of wet blue goat and sheep skins based on defectsAccepted
BS ISO 1419 Rubber- or plastics-coated fabrics - Accelerated-ageing testsAccepted
BS ISO 1420 Rubber- or plastics-coated fabrics - Determination of resistance to penetration by waterPublic Comment
BS ISO 15115 Leather - VocabularyAccepted
BS ISO 15394 Packaging - Bar code and two-dimensional symbols for shipping, transport and receiving labelsPublic Comment
BS ISO 16106 Packaging - Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001Idea
BS ISO 17451-1 Alphanumeric Codification of Inventories for Shipments of Household Goods and Personal Effects Shipments Part 1: Titre manquePublic Comment
BS ISO 17551 Leather - Pickled sheep pelts - Guidelines for grading on the basis of defect and sizeAccepted
BS ISO 18574 Internet of Things (IoT) in the supply chain - Containerized cargoIdea
BS ISO 18575 Internet of Things (IoT) in the supply chain - Products & product packagesIdea
BS ISO 18576 Internet of Things (IoT) in the supply chain - Returnable transport items (RTIs)Idea
BS ISO 18577 Internet of Things (IoT) in the supply chain - Transport unitsIdea
BS ISO 18616-1 Returnable transport system - Reusable, rigid plastics distribution boxes Part 1: General purpose applicationPublic Comment
BS ISO 18616-2 Returnable transport system - Reusable, rigid plastics distribution boxes Part 2: General specifications for testingPublic Comment
Opens a new windowBS ISO 19709-1 Packaging - Small load carrier systems Part 1: Common requirements and test methodsPublic Comment
BS ISO 19809 Packaging-Accessible design-Information and markingAccepted
BS ISO 20699 Leather - Chemical tests - Pre-ageing for chemical determination of hexavalent chromiumAccepted
BS ISO 20701 Leather - Tests for colour fastness - Colour fastness to salivaAccepted
BS ISO 21067-1 Packaging - Vocabulary Part 1: General termsPublic Comment
BS ISO 28219 Packaging - Labelling and direct product marking with linear bar code and two-dimensional symbolsPublic Comment
BS ISO 4180 Packaging - Complete, filled transport packages - General rules for the compilation of performance test schedulesIdea
BS ISO 4675 Rubber- or plastics-coated fabrics - Low-temperature bend testAccepted
PD IEC/TR 61916 Ed 4.0 Electrical accessories – Harmonization of general rulesAccepted
PD IEC/TR 63036 Ed 1.0 Electrical interface specification for phase-cut dimmer in phase cutdimmed lighting systemsApproval
PD IEC/TS 62735-2 D.C. Plugs and socket-outlets to be used in indoor access controlle dareas - Part 2: Plug and socket-outlet system for 5,2 kWAccepted
PD ISO/TR 2822-2 Raw cattle hides and calf skins Part 2: Guidelines for grading on the basis of massAccepted
PD ISO/TR 2822-3 Raw cattle hides and calf skins Part 3: Guidelines for grading on the basis of defectsAccepted
PD ISO/TS 18614-1 Packaging - Label Material Part 1: Questions for Material DeterminationAccepted
PD ISO/TS 18614-2 Packaging - Label Material Part 2: Specification of MaterialAccepted
PD ISO/TS 19409 Footwear - Sizing - Measurement of last dimensionsIdea
PD ISO/TS 19410-1 Footwear - Sizing - Inshoe measurement Part 1: Shoe lengthIdea
PD ISO/TS 19709-3 Packaging Small Load Carrier Systems Part 3: Bond Stackable System (BSS)Publication

[ back to top ]

Published standards (45)

Sort by: Reference | Title | Status

Standard referenceNameStatus
BS EN 12461:1998Biotechnology. Large-scale process and production. Guidance for the handling, inactivating and testing of wasteCurrent
BS EN 13137:2001Characterisation of waste. Determination of total organic carbon (TOC) in waste, sludges and sedimentsCurrent
DD ENV 13370:2001Characterization of waste. Analysis of eluates. Determination of Ammonium-N, AOX, conductivity, Hg, phenol index, TOC, CN- easily liberatable, F-Withdrawn
BS EN 14346:2006Characterization of waste. Calculation of dry matter by determination of dry residue or water contentCurrent
PD CEN/TS 16023:2013Characterization of waste. Determination of gross calorific value and calculation of net calorific valueCurrent
BS EN 14345:2004Characterization of waste. Determination of hydrocarbon content by gravimetryCurrent
BS EN 14039:2004Characterization of waste. Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography.Current
BS EN 15527:2008Characterization of waste. Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS)Current
PD CEN/TR 15018:2004Characterization of waste. Digestion of waste samples using alkali-fusion techniquesCurrent
BS EN 16457:2014Characterization of waste. Framework for the preparation and application of a testing programme. Objectives, planning and reportCurrent
BS EN 16123:2013Characterization of waste. Guidance on selection and application of screening methodsCurrent
PD CEN/TR 16363:2012Characterization of waste. Kinetic testing for assessing acid generation potential of sulfidic waste from extractive industriesCurrent
PD CEN/TS 16660:2015Characterization of waste. Leaching behaviour test. Determination of the reducing character and the reducing capacityCurrent
BS EN 14997:2015Characterization of waste. Leaching behaviour test. Influence of pH on leaching with continuous pH controlCurrent
BS EN 14429:2015Characterization of waste. Leaching behaviour test. Influence of pH on leaching with initial acid/base additionCurrent
DD CEN/TS 15364:2006Characterization of waste. Leaching behaviour tests. Acid and base neutralization capacity testCurrent
DD CEN/TS 14997:2006Characterization of waste. Leaching behaviour tests. Influence of pH on leaching with continuous pH-controlWithdrawn
DD CEN/TS 14429:2005Characterization of waste. Leaching behaviour tests. Influence of pH on leaching with initial acid/base additionWithdrawn
BS EN 12920:2006+A1:2008Characterization of waste. Methodology for the determination of the leaching behaviour of waste under specified conditionsCurrent
DD ENV 12920:1998Characterization of waste. Methodology for the determination of the leaching behaviour of waste under specified conditionsWithdrawn
PD CEN/TR 16376:2012Characterization of waste. Overall guidance document for characterization of waste from the extractive industriesCurrent
BS EN 15002:2006Characterization of waste. Preparation of test portions from the laboratory sampleWithdrawn
BS EN 15002:2015Characterization of waste. Preparation of test portions from the laboratory sampleCurrent
BS EN 14735:2005Characterization of waste. Preparation of waste samples for ecotoxicity testsCurrent
BS EN 14899:2005Characterization of waste. Sampling of waste materials. Framework for the preparation and application of a sampling planCurrent
BS EN 16424:2014Characterization of waste. Screening methods for the element composition by portable X-ray fluorescence instrumentsCurrent
BS EN 13965-2:2010Characterization of waste. Terminology - Management related terms and definitionsCurrent
BS EN 13965-2:2004Characterization of waste. Terminology - Management related terms and definitionsWithdrawn
DD ENV 12940:1999Footwear manufacturing wastes. Waste classification and managementWithdrawn
BS EN 12940:2004Footwear manufacturing wastes. Waste classification and managementCurrent
BS EN 14803:2006Identification and/or determination of the quantity of wasteCurrent
BS EN 13193:2000Packaging. Packaging and the environment. TerminologyCurrent, Work in Hand
PD CEN/TR 16193:2013Sludge, treated biowaste and soil. Detection and enumeration of Escherichia coliCurrent
BS EN 16166:2012Sludge, treated biowaste and soil. Determination of adsorbable organically bound halogens (AOX)Current
BS EN 16169:2012Sludge, treated biowaste and soil. Determination of Kjeldahl nitrogenCurrent
BS EN 15933:2012Sludge, treated biowaste and soil. Determination of pHCurrent
BS EN 16167:2012Sludge, treated biowaste and soil. Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD)Current
BS EN 16168:2012Sludge, treated biowaste and soil. Determination of total nitrogen using dry combustion methodCurrent
BS EN 16174:2012Sludge, treated biowaste and soil. Digestion of aqua regia soluble fractions of elementsCurrent
BS EN 16173:2012Sludge, treated biowaste and soil. Digestion of nitric acid soluble fractions of elementsCurrent
BS EN 16179:2012Sludge, treated biowaste and soil. Guidance for sample pretreatmentCurrent
BS EN 15934:2012Sludge, treated biowaste, soil and waste. Calculation of dry matter fraction after determination of dry residue or water contentCurrent
BS EN 15935:2012Sludge, treated biowaste, soil and waste. Determination of loss on ignitionCurrent
BS EN 15936:2012Sludge, treated biowaste, soil and waste. Determination of total organic carbon (TOC) by dry combustionCurrent
PAS 402:2013 (Welsh)Waste resource management. Specification for performance reportingCurrent

[ back to top ]

Recently Viewed
Need Help?

We are here to help you with any queries. Email us for help.

But first, why not view the Help Pages?