Skip to content
RSS feed for this category

Adaptation for moving

Standards in development (47)

Sort by: Title | Status

Standard TitleStatus
BS 5656-3 Safety rules for the construction and installation of escalators and moving walks Part 3: Examination and test of new moving walks before putting into service - Specification for means of determining compliance with BS EN 115-1:2008+A1:2010Approval
Opens a new windowBS EN 1570-2 Safety requirements for lifting tables Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/sPublic Comment
Opens a new windowBS EN 16719 Transport PlatformsPublic Comment
BS EN 61010-031 ED.2 Safety requirements for hand-held probe assemblies for electrical measurement and testPublic Comment
BS EN 61010-2-010 Safety requirements for electrical equipment for measurement, control and laboratory use- Part 2-010: Particular requirements for laboratory eqipment for the heating of materialsApproval
BS EN 61010-2-011 Ed.1 electrical equipment for measurement, control, and laboratory use Part 2-011: Particular requirements for refrigerated equipmentPublic Comment
BS EN 61010-2-012 Ed.1 electrical equipment for measurement, control, and laboratory use Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipmentPublic Comment
BS EN 61010-2-0120 Ed.1 electricla equipment for measurement, control, laboratory use Part 2-0120: Particular safety requirements for machineryPublic Comment
BS EN 61010-2-030 Ed.2 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-030: Particular requirements for testing and measuring circuitsIdea
BS EN 61010-2-034 Ed. 1 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-034: Particular requirements for insulation resistance and electric strength test and measurement equipmentIdea
BS EN 61010-2-040 ED.2 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-040: Particular requirements for sterilizers and washer- disinfectors used to treat medical materialsAccepted
BS EN 61010-2-051 Ed.3 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-051: Particular requirements for laboratory eqipment for mixing and stirringPublic Comment
BS EN 61010-2-061 Safety requirements for electrical equipment for measurement, control and laboratory use- Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionizationPublic Comment
BS EN 61010-2-081 Ed.2 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposesPublic Comment
BS EN 61010-2-101 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for laboratory equipment for in vitro diagnostic (IVD) medical equipmentPublic Comment
BS EN 81-20 Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods Part 20: Passenger and goods passenger liftsPublication
BS EN 81-50 Safety rules for the construction and installation of lifts - Examinations and tests Part 50: Design rules, calculations, examinations and tests of lift componentsPublication
BS EN 81-72 Safety rules for the construction and installation of lifts Particular applications for passenger and goods passenger lifts - Part 72: Firefighters liftsPublic Comment
Opens a new windowBS EN 81-73 Safety rules for the construction and installation of lifts Particular applications for passenger lifts - Part 73: Behaviour of lifts in the event of firePublic Comment
BS ENISO 10328:2006/A1 Prosthetics - Structural testing of lower-limb prostheses - Requirements and test methodsPublication
BS ENISO 22675:2006/A1 Prosthetics - Testing of ankle-foot devices and foot units - Requirements and test methodsApproval
BS ENISO 25745-2 Energy performance of lifts, escalators and moving walks Part 2 : Energy calculation and classification for lifts (elevators)Approval
BS ENISO 25745-3 Energy performance of lifts, escalators and moving walks Part 3 : Energy calculation and classification for escalators and moving walks"Approval
BS ISO 10865-2 Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers Part 2: Systems for forward-facing wheelchair-seated passengers Systems for forward facing wheelchair-seated passengersPublic Comment
BS ISO 13405-1 Prosthetics and orthotics - Classification and description of prosthetic components Part 1: Classification of prosthetic componentsPublic Comment
BS ISO 13405-2 Prosthetics and orthotics - Classification and description of prosthetic components Part 2: Description of lower-limb prosthetic componentsPublic Comment
BS ISO 13405-3 Prosthetics and orthotics - Classification and description of prosthetic components Part 3: Description of upper-limb prosthetic componentsPublic Comment
BS ISO 16840-12 Wheelchair Seating Part 12: Apparatus and Method for Cushion Envelopment TestingAccepted
BS ISO 16955 Prosthetics -- Quantification of physical parameters of ankle foot devices and foot unitsPublic Comment
BS ISO 17069 Accessible design - Consideration and assistive products for accessible meetingPublication
BS ISO 17966 Assistive products for personal hygienePublic Comment
BS ISO 19026 Accessible Design-Shape,color,and arrangement of toilet flushing button and call button and arrangement of toilet paper hplder in public restroomAccepted
BS ISO 19027 Design principles for communication support board using pictorial symbolsAccepted
BS ISO 19028 Accessible design - Information contents, figuration and disply methods of tactile guide mapsAccepted
BS ISO 19029 Auditory guides in public spaceAccepted
BS ISO 19335 Assistive products for persons with disability - Guidelines on how to introduce assistive products for cognitive disabilitiesIdea
BS ISO 29783-2 Prosthetics and orthotics - Vocabulary Part 2: Prosthetic gaitPublic Comment
BS ISO 7176-1 Wheelchairs Part 1: Determination of static stabilityPublication
BS ISO 7176-19:2008/AMD 1 Wheelchairs Part 19: Wheeled mobility devices for use as seats in motor vehicles - Amendment 1: .Public Comment
BS ISO 7176-22 Wheelchairs Part 22: Set-up proceduresPublication
BS ISO 7176-8 Wheelchairs Part 8: Requirements and test methods for static, impact and fatigue strengthsPublic Comment
BS ISO 8549-4 Prosthetics and orthotics - Vocabulary Part 4: Terms relating to limb amputationPublic Comment
PD CEN/TR 81-12 Safety rules for the construction and installation of lifts - Basics and interpretations Part 12: Use of EN 81-20 and EN 81-50 in specific marketsApproval
PD ISO/TR 14799-1 Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparisonApproval
PD ISO/TR 14799-2 Comparison of worldwide escalator and moving walk safety standards Part 2: Abbreviated comparison and commentsApproval
PD ISO/TR 16840-9 Wheelchair seating Part 9: Clinical interface pressure mapping guidelines for seatingAccepted
PD ISO/TS 18870 Lifts (elevators) - Requirements for lifts used to assist in building evacuationApproval

[ back to top ]

Published standards (69)

Sort by: Reference | Title | Status

Standard referenceNameStatus
BS EN ISO 11334-1:2007Assistive products for walking manipulated by one arm. Requirements and test methods - Elbow crutchesCurrent
BS 6440:1983Code of practice for powered lifting platforms for use by disabled personsWithdrawn
BS 8603:2013Code of practice for wheelchair passport schemesCurrent
BS EN 12184:2009Electrically powered wheelchairs, scooters and their chargers. Requirements and test methodsWithdrawn
BS EN 12184:2014Electrically powered wheelchairs, scooters and their chargers. Requirements and test methodsCurrent
BS EN 12184:1999Electrically powered wheelchairs, scooters and their chargers. Requirements and test methodsWithdrawn
BS 6937:1988Glossary of wheelchair termsWithdrawn
PD ISO/TR 13570:2001Guidelines for the application of the ISO 7176 series on wheelchairsCurrent
BS EN ISO 10535:2006Hoists for the transfer of disabled persons. Requirements and test methodsCurrent
BS EN 12183:2009Manual wheelchairs. Requirements and test methodsWithdrawn
BS EN 12183:1999Manually propelled wheelchairs. Requirements and test methodsWithdrawn
BS 6936:1988Method for designation of types of wheelchairWithdrawn
BS 5943:1980Methods for measurement and recording for orthopaedic footwearWithdrawn
BS 6440:1999Powered lifting platforms for use by disabled persons. Code of practiceWithdrawn
BS 6440:2011Powered vertical lifting platforms having non-enclosed or partially enclosed liftways intended for use by persons with impaired mobility. SpecificationCurrent
BS EN 81-40:2008Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods - Stairlifts and inclined lifting platforms intended for persons with impaired mobilityCurrent
BS EN 81-41:2010Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods - Vertical lifting platforms intended for use by persons with impaired mobilityCurrent
BS 5104:1990Specification for adjustable height walking framesWithdrawn
BS 5205:1990Specification for adjustable metal walking sticksWithdrawn
BS 4988:1990Specification for elbow crutchesWithdrawn
BS 4986:1990Specification for fixed height walking framesWithdrawn
BS 5568:1978Specification for folding wheelchairs for adultsWithdrawn
BS 4922:1990Specification for metal tripod and tetrapod walking sticksWithdrawn
BS 4997:1991Specification for wooden axilla crutchesWithdrawn
BS 5181:1975Specification for wooden walking sticksWithdrawn
BS ISO 10542-4:2004Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant restraint systems - Clamping-type tiedown systemsCurrent
BS ISO 10542-5:2004Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems - Systems for specific wheelchairsCurrent
BS ISO 10542-3:2005Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems - Docking-type tiedown systemsCurrent
BS ISO 10542-1:2001Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems - Requirements and test methods for all systemsCurrent, Work in Hand
BS ISO 10542-2:2001Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems - Four-point strap-type tiedown systemsCurrent
BS EN ISO 24415-1:2009Tips for assistive products for walking. Requirements and test methods - Friction of tipsCurrent
BS ISO 24415-2:2011Tips for assistive products for walking. Requirements and test methods - Durability of tips for crutches Current
BS EN ISO 11199-2:2005Walking aids manipulated by both arms. Requirements and test methods - RollatorsCurrent
BS EN ISO 11199-3:2005Walking aids manipulated by both arms. Requirements and test methods - Walking tablesCurrent
BS EN ISO 11199-1:1999Walking aids manipulated by both arms. Requirements and test methods - Walking framesCurrent
BS EN ISO 11199-2:1999Walking aids manipulated by both arms. Requirements and test methods - RollatorsWithdrawn
BS EN ISO 11334-4:1999Walking aids manipulated by one arm. Requirements and test methods - Walking sticks with three or more legsCurrent
BS EN ISO 11334-1:1997Walking aids manipulated by one arm. Requirements and test methods - Elbow crutchesWithdrawn
BS EN 1985:1999Walking aids. General requirements and test methodsCurrent
BS ISO 10865-1:2012Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers - Systems for rearward-facing wheelchair-seated passengersCurrent
BS ISO 16840-3:2014Wheelchair seating - Determination of static, impact and repetitive load strengths for postural support devicesCurrent
BS ISO 16840-2:2007Wheelchair seating - Determination of physical and mechanical characteristics of devices intended to manage tissue integrity. Seat cushionsCurrent
PD ISO/TS 16840-11:2014Wheelchair seating - Determination of perspiration dissipation characteristics of seat cushions intended to manage tissue integrityCurrent
BS 6935-5:1988Wheelchair tests - Methods for determination of overall dimensions, mass and turning spaceWithdrawn
BS ISO 7176-9:2009Wheelchairs - Climatic tests for electric wheelchairsCurrent
BS ISO 7176-3:2003Wheelchairs - Determination of effectiveness of brakesWithdrawn
BS ISO 7176-8:1998Wheelchairs - Requirements and test methods for static, impact and fatigue strengthsCurrent, Work in Hand
BS ISO 7176-1:1999Wheelchairs - Determination of static stabilityCurrent, Work in Hand
BS ISO 7176-22:2000Wheelchairs - Set-up proceduresCurrent, Work in Hand
BS ISO 7176-26:2007Wheelchairs - VocabularyCurrent
BS ISO 7176-15:1996Wheelchairs - Requirements for information disclosure, documentation and labellingCurrent
BS ISO 7176-16:1997Wheelchairs - Resistance to ignition of upholstered parts. Requirements and test methodsWithdrawn
BS ISO 7176-14:1997Wheelchairs - Power and control systems for electric wheelchairs. Requirements and test methodsWithdrawn
BS ISO 7176-4:1997Wheelchairs - Energy consumption of electric wheelchairs and scooters for determination of theoretical distance rangeWithdrawn
PD ISO/TR 13570-2:2014Wheelchairs - Typical values and recommended limits of dimensions, mass and manoeuvring space as determined in ISO 7176-5Current
BS ISO 7176-11:2012Wheelchairs - Test dummiesCurrent
BS ISO 7176-25:2013Wheelchairs - Batteries and chargers for powered wheelchairsCurrent
BS ISO 7176-3:2012Wheelchairs - Determination of effectiveness of brakesCurrent
BS ISO 7176-28:2012Wheelchairs - Requirements and test methods for stair-climbing devicesCurrent
BS ISO 7176-16:2012Wheelchairs - Resistance to ignition of postural support devicesCurrent
BS ISO 7176-4:2008Wheelchairs - Energy consumption of electric wheelchairs and scooters for determination of theoretical distance rangeCurrent
BS ISO 7176-21:2009Wheelchairs - Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargersCurrent
BS ISO 7176-2:2001Wheelchairs - Determination of dynamic stability of electric wheelchairsCurrent
BS ISO 7176-21:2003Wheelchairs - Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scootersWithdrawn
BS ISO 7176-5:2008Wheelchairs - Determination of dimensions, mass and manoeuvring spaceCurrent
BS ISO 7176-14:2008Wheelchairs - Power and control systems for electrically powered wheelchairs and scooters. Requirements and test methodsCurrent
BS ISO 7176-6:2001Wheelchairs - Determination of maximum speed, acceleration and deceleration of electric wheelchairsCurrent
BS ISO 7176-9:2001Wheelchairs - Climatic tests for electric wheelchairsWithdrawn
BS ISO 7176-24:2004Wheelchairs - Requirements and test methods for user-operated stair-climbing devicesWithdrawn

[ back to top ]

Recently Viewed
Need Help?

We are here to help you with any queries. Email us for help.

But first, why not view the Help Pages?