Skip to content
RSS feed for this category

Electrical engineering

Standards in development (435)

Sort by: Title | Status

Standard TitleStatus
BS 7671:2008/A3:2015 Installations - IET Wiring Regulations Requirements for Electrical Installations - IET Wiring RegulationsPublic Comment
BS EN /TC 16783 category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations - Complementary elementAccepted
BS EN 13162:2012/A1 Thermal insulation products for buildings - Factory made mineral wool (MW) products - SpecificationAccepted
BS EN 13163:2012/A1 Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - SpecificationAccepted
BS EN 13164:2012/A1 Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - SpecificationAccepted
BS EN 13165:2012/A1 Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - SpecificationAccepted
BS EN 13166:2012/A1 Thermal insulation products for buildings - Factory made phenolic foam (PF) products - SpecificationAccepted
BS EN 13167:2012/A1 Thermal insulation products for buildings - Factory made cellular glass (CG) products - SpecificationAccepted
BS EN 13168:2012/A1 Thermal insulation products for buildings - Factory made wood wool (WW) products - SpecificationAccepted
BS EN 13169:2012/A1 Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - SpecificationAccepted
BS EN 13170:2012/A1 Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - SpecificationAccepted
BS EN 13171:2012/A1 Thermal insulation products for buildings - Factory made wood fibre (WF) products - SpecificationAccepted
BS EN 14986 Design of fans working in potentially explosive atmospheresPublic Comment
BS EN 15628 Maintenance - Qualification of maintenance personnelApproval
BS EN 16069:2012/A1 Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - SpecificationAccepted
BS EN 16491 Thermal insulation products for buildings - Factory made composite products - SpecificationPublic Comment
BS EN 16646 Maintenance within physical asset managementTechnical Review
BS EN 16724 Thermal insulation products for building applications - Instructions for mounting and fixing for determination of the reaction to fire testing of external thermal Insulation composite systems (ETICS) (Analogue to EN 15715)Public Comment
Opens a new windowBS EN 1839 Determination of explosion limits of gases and vapours and determination of the limiting oxygen concentration (LOC) for flammable gases and vapoursPublic Comment
BS EN 50117-4-2 Coaxial cables Part 4-2: Sectional specification for CATV cables up to 6 GHz used in cables distribution networksIdea
BS EN 50156-1 Electrical equipment for furnaces and ancillary equipment Part 1: Requirements for application design and installationPublic Comment
BS EN 50156-2 Electrical equipment for furnaces and ancillary equipment Part 2: Requirements for design, development and type approval of safety devices and subsystemsPublic Comment
BS EN 50171 Central safety power supply systemsPublic Comment
BS EN 50180-1 and from 250 A to 3,15 kA for liquid filled transformersPublic Comment
BS EN 50180-2 Bushings above 1 kV up to 52 kV and from 250A to 3,15 kA for liquid filled transformers Part 2: Requirement for bushing componentsnull
BS EN 50180-3 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers Part 3: Requirement for bushing fixationsnull
BS EN 50288-10-2 Multi-element metallic cables used in analogue and digital communication and control Part 10-2: Sectional specification for screened cables characterized from 1 MHz up to 500 MHz - Horizontal and building backbone cablesPublic Comment
BS EN 50288-11-2 Multi-element metallic cables used in analogue and digital communication and control Sectional specification for un-screened cables, characterized from 1 MHz up to 500 MHz - Horizontal and building backbone cablesPublic Comment
BS EN 50288-9-2 Multi-element metallic cables used in analogue and digital communication and control Part 9-2: Sectional specification for screened cables characterised from 1 MHz uo to 1000 MHz - Work area, patch cord and data centre cablesPublic Comment
BS EN 50289-1-17 Communications cables – Specifications for test methods Part 1-17: Electrical test methods – Exogenous Crosstalk ExNEXT and ExFEXTAccepted
BS EN 50290-2-33 Communication cables Part 2-33: Common design rules and construction - Polyethylene for multi element metallic data cables for indoor applicationIdea
BS EN 50290-2-37 Communication cables Part 2-37: Common design rules and construction - Polyethylene insulation for coaxial cablesIdea
BS EN 50290-2-38 Communication cables Part 2-38: Common design rules and construction - Polypropylene insulation for coaxial cablesIdea
BS EN 50290-4-1 Ed.2 prEN 50290-4-1 ed.2 : Communication cables Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspectsApproval
BS EN 50290-4-2 Ed.2 prEN 50290-4-2 ed.2 : Communication cables Part 4-2: General considerations for the use of cables - Guide to useApproval
BS EN 50539-11:2013/A1 Low-voltage surge protective devices - Surge protective devices for specific application including d.c. Part 11: Requirements and tests for SPDs in photovoltaic applicationsApproval
BS EN 50598-1 Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 1: General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA), and semi analytic model (SAM)Public Comment
BS EN 50598-2 Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 2: Energy efficiency indicators for power drive systems and motor startersPublic Comment
BS EN 50598-3 Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 3: Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarationsPublic Comment
BS EN 50882-11 Multi-element metalic cables used in analogue and digital communication and control Part 11: Sectional specification for un-screened cables, characterised up to 500 MHz, for horizontal and building backbone wiringPublic Comment
BS EN 55016-1-1/A3 ED 3 Requirements for calibration of measuring equipmentPublic Comment
BS EN 55016-1-1/AM2 ED3 Requirements when using an external preamplifier with a measuring receiverApproval
BS EN 55016-1-2 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-2: Radio disturbance and immunity measuring apparatus – Coupling devices for conducted disturbance measurementsPublication
BS EN 55016-1-3 A1 Ed.2 Specification for radio disturbance and immunity measuring apparatus andmethods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance powerAccepted
BS EN 55016-1-4 Ed 3.0 /A2 Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurementsAccepted
BS EN 55016-1-5 am 1 Ed. 2.0 Specification for radio disturbance and immunity measuring apparatusandmethods – Part 1-5: Radio disturbance and immunity measuring apparatus – Antenna calibration sites and reference test sites for 5 MHz to 18 GHzPublic Comment
BS EN 55016-1-5 Specification for radio disturbance and immunity measuring apparatus and tests - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30 MHz to 1 000 MHzApproval
BS EN 55016-1-6 Ed 1.0 /A1 Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibrationPublic Comment
BS EN 55016-1-6 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC- antenna calibrationApproval
BS EN 55016-2-3 Am3 Ed 3.0 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiateddisturbance measurementsPublic Comment
BS EN 55016-2-3: 2010/A2 Specification for radio disturbance and immunity measuring apparatus and methods Part 2-3 Methods of measurement of disturbances and immunity - Radiated disturbance measurementsPublication
BS EN 55016-4-2:2011/A1 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling. Uncertainty in EMC measurementsPublication
BS EN 60027-2 Ed 4.0 Letter symbols to be used in electrical technology Part 2: Telecommunications and electronicsAccepted
BS EN 60034-1 Ed 13.0 Rotating electrical machines Part 1: Rating and performanceAccepted
BS EN 60034-12 Ed 3.0 Rotating electrical machines Part 12: Starting performance of single-speed three-phase cage induction motorsAccepted
BS EN 60034-18-42 Rotating electrical machines Part 18-42: Qualification and acceptance tests for partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage convertersAccepted
BS EN 60034-19 Ed 2.0 Rotating electrical machines Part 19: Specific test methods for d.c. machines operating on rectifier-fed power supplies or other d.c. sourcesApproval
BS EN 60034-2-1 ED 2.0 Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)Publication
BS EN 60034-23 ED 1.0 Rotating electrical machines Part 23: Specification for the refurbishment of rotating electrical machinesAccepted
BS EN 60034-27-3 Ed1.0 ED 1.0 Rotating electrical machines Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machinesApproval
BS EN 60050-651 International Electrotechnical Vocabulary Part 651: Live workingPublication
BS EN 60071-2 ED 3.0/A1 AMD 1 Insulation co-ordination - Part 2: Application guidePublic Comment
BS EN 60071-5 Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stationsApproval
BS EN 60079-1 ED. 7.0 IEC 60079-1 Ed. 7.0 Explosive atmospheres Part 1: Equipment protection by flameproof enclosures "d"Publication
BS EN 60079-10-2 Ed 2.0 Explosive atmospheres Part 10-2: Classification of areas - Combustible dust atmospheresPublic Comment
BS EN 60079-18 Ed 4.0 Explosive atmospheres Part 18: Equipment protection by encapsulation "m"Public Comment
BS EN 60079-2 Explosive atmospheres Part 2: Equipment protection by pressurized enclosure "p"Publication
BS EN 60079-26 Explosive atmospheres Part 26: Equipment with equipment protection level (EPL) GaPublic Comment
BS EN 60079-28 Ed 2.0 Explosive atmospheres Part 28: Protection of equipment and transmission systems using optical radiationPublic Comment
BS EN 60079-29-1 Ed 2.0 Explosive atmospheres Part 29-1: Gas detectors - Performance requirements of detectors for flammable gasesPublic Comment
BS EN 60079-29-2 Ed 2.0 Explosive atmospheres Part 29-2: Gas detectors - Selection; installation; use and maintenance of detectors for flammable gases and oxygenPublic Comment
BS EN 60079-30-1 Explosive atmospheres Part 30-1: Electrical resistance trace heating- General; type testing and design requirementsPublic Comment
BS EN 60079-30-2 Explosive atmospheres Part 30-2: Electrical resistance trace heating- Application guide for design; installation and maintenancePublic Comment
BS EN 60079-32-2 Explosive atmospheres Part 32-2: Electrostatics hazards - TestsPublic Comment
BS EN 60079-5 Ed 4.0 Explosive atmospheres Part 5: Equipment protection by powder filling "q"Public Comment
BS EN 60079-6 Ed 4.0 Explosive atmospheres Part 6: Equipment protection by oil immersion "o"Public Comment
BS EN 60079-7 IEC 60079-7 Ed. 5.0 Explosive atmospheres Part 7: Equipment protection by increased safety 'e'Public Comment
BS EN 60081:1998+A6 Ed.5.0 Double-capped fluorescent lamps - Performance specificationsAccepted
BS EN 60099-4 ED 3.0 F1 Surge arresters Part 4: Metal-oxide surge arresters without gaps for a.c. systemsPublication
BS EN 60099-9 Ed1.0 Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stationsPublication
BS EN 60122-1+A1 Amendment1 : Quartz crystal units of assessed quality Part 1: Generic specificationAccepted
BS EN 60153-1 HOLLOW METALLIC WAVEGUIDES Part 1: General requirements and measuring methodsPublic Comment
BS EN 60153-2 Ed 3.0 HOLLOW METALLIC WAVEGUIDES Part 2: Relevant specifications for ordinary rectangular waveguidesPublic Comment
BS EN 60154-1 Ed 3.0 FLANGES FOR WAVEGUIDES Part 1: General requirementsPublic Comment
BS EN 60154-2 Ed 3.0 FLANGES FOR WAVEGUIDES Part 2: Relevant specifications for flanges for ordinary rectangular waveguidesPublic Comment
BS EN 60255-118-1 Measuring relays and protection equipment - Part 195: Functional requirements for synchrophasor measurementsAccepted
BS EN 60255-24 Measuring relays and protection equipment - Part 24 : Common format for transient data exchange (COMTRADE) for powersystemsPublication
BS EN 60255-26 Measuring relays and protection equipment Part 26: Electromagnetic compatibility requirementsPublication
BS EN 60300-1 ED.3 Dependability management Part 1: Guidance for management and applicationPublication
BS EN 60300-3-10 Ed 2.0 Dependability management Part 3-10: Application guide - Maintainability and supportabilityAccepted
BS EN 60300-3-3 Dependability management Part 3-3: Application guide - Life cycle costingAccepted
BS EN 60357:2003+A4 ED.3 Tungsten halogen lamps (non-vehicle) - Performance specificationsnull
BS EN 60398 : Installations for electroheating and electromagnetic processing - General test methodsPublic Comment
BS EN 60398 Ed 3.0 Installations for electroheating and electromagnetic processing - General test methodsAccepted
BS EN 60401-3 Terms and nomenclature for cores made of magnetically soft ferrites Part 3: Guidelines on the format of data appearing in manufacturers' catalogues of transformer and inductor coresAccepted
BS EN 60424-1 Ferrite cores - Guidelines on the limits of surface irregularities Part 1: General SpecificationAccepted
BS EN 60424-2 Ferrite cores - Guidelines on the limits of surface irregularities Part 2: RM-coresAccepted
BS EN 60424-3 Ferrite cores - Guidelines on the limits of surface irregularities Part 3: ETD-cores, EER-cores, EC-cores and E-coresPublic Comment
BS EN 60424-4 Ferrite cores - Guidelines on the limits of surface irregularities Part 4: Ring-coresAccepted
BS EN 60424-8 Ferrite cores - Guidelines on the limits of surface irregularities Part 8: PQ-coresAccepted
BS EN 60444-8 ED 2.0 Measurement of quartz crystal unit parameters Part 8: Test fixture for surface mounted quartz crystal unitsAccepted
BS EN 60455-2 Ed 3.0 Resin based reactive compounds used for electrical insulation -Part 2: Methods of testPublic Comment
BS EN 60519-1 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirementsPublic Comment
BS EN 60556 am1 Ed. 2.0 Gyromagnetic materials intended for application at microwave frequencies- Measuring methods for propertiesAccepted
BS EN 60630+A7 Maximum Lamp outlines for incandescent lampsPublication
BS EN 60633:1999+A1:2009+A2 Terminology for high-voltage direct current (HVDC) transmissionPublic Comment
BS EN 60674-2 Ed 2.0 IEC 60674-2/Ed2: Specification for plastic films for electrical purposes. Part 2: Methods of testPublic Comment
BS EN 60674-3-8 Ed 1.0 /A1 Amendment 1: Plastic films for electrical purposes -Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulationAccepted
BS EN 60679-1 Piezoelectric and associated material oscillators of assessed quality Part 1 : Generic specificationAccepted
BS EN 60679-1+A1 Quartz crystal controlled oscillators of assessed quality Part 1: Generic specification Amendment 1Accepted
BS EN 60695-1-11 Ed 2.0 Fire hazard testing Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessmentPublication
BS EN 60695-1-12 Fire hazard testing Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineeringPublic Comment
BS EN 60695-1-20 Fire hazard testing Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidanceAccepted
BS EN 60695-1-21 Fire hazard testing Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methodsAccepted
BS EN 60695-10-3 Ed 2.0 Fire hazard testing Part 10-3: Abnormal heat - Mould stress relief distortion testAccepted
BS EN 60695-11-5 Ed 2.0 Fire hazard testing Part 11-5: Test flames - Needle-flame test method - Apparatus; confirmatory test arrangement and guidanceAccepted
BS EN 60695-2-12/Amd1 Ed 2.0 Fire hazard testing Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materialsPublication
BS EN 60695-8-2 Ed1.0 IEC 60695-8-2 Ed 1.0: Fire hazard testing Part 8-2: Heat release – Summary and relevance of test methodsPublic Comment
BS EN 60700-1 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testingPublic Comment
BS EN 60700-2 Thyristor valves for high-voltage direct current (HVDC) power transmission - Part 2: TerminologyAccepted
BS EN 60758 Synthetic quart crystal - Specifications and guidelines for the useAccepted
BS EN 60809 Ed 2.0 /A6 Amendment 6 - Lamps for road vehicles - Dimensional; electrical and luminous requirementsAccepted
BS EN 60809 ED 3.0+A6 Lamps for road vehicles - Dimensional, electrical and luminous requirementsPublic Comment
BS EN 60810 ED 4.0 Ed 3.0 /A3 Amendment 3 - Lamps for road vehicles - Performance requirementsPublic Comment
BS EN 60810 ed4.0 Lamps for road vehicles - Performance requirementsPublic Comment
BS EN 60812 Ed 3.0 Failure Mode and Effects analysis (FMEA)Accepted
BS EN 60862-1 Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specificationPublic Comment
BS EN 60870-5-104 ED 1.0/A1/A1 Telecontrol equipment and systems Part 5-104: Transmission protocols - Functional enhancements to IEC 60870-5-104Public Comment
BS EN 60870-6-503 ED 3.0 Telecontrol equipment and systems Telecontrol equipment and systems - Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Services and protocolPublication
BS EN 60870-6-702 ED 2.0 Telecontrol equipment and systems Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Functional profile for providing the TASE.2 application service in end systemsPublication
BS EN 60870-6-802 ED 3.0 Telecontrol equipment and systems Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Object modelsPublication
BS EN 60901 Single-capped fluorescent lamps - Performance specificationsPublic Comment
BS EN 60966-1 Ed.3 Cables, wires, waveguides, r.f. connectors, and accessories for communication and signallingPublic Comment
BS EN 60966-2-4 Ed 4 Detail specification for cable assebmblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz, IEC 61196-2 connectorsPublic Comment
BS EN 60966-2-5 Ed 4 Detail specification for cable assebmblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz, IEC 61196-2 connectorsPublic Comment
BS EN 60966-2-6 Ed 4 Detail specification for cable assebmblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz, IEC 61196-24 connectorsPublic Comment
BS EN 60966-2-7 ED.1 Radio frequency and coaxial cable assemblies Part 2-7: Detail specification for cable assemblies for radio and TV recievers - Frequency range 0 MHz to 3000 MHz, IEC 61169-47 connectorsPublic Comment
BS EN 60968 Ed3.0 Self-ballasted fluorescent lamps for general lighting services - Safety requirementsPublic Comment
BS EN 60968:2013/A11 Self-ballasted lamps for general lighting services - Safety requirementsIdea
BS EN 60969 ED 2.0 Self-ballasted lamps for general lighting services - Performance require mentsPublic Comment
BS EN 61000-3-2 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ?16 A per phase)Publication
BS EN 61000-4-13 A2 Electromagnetic compatibilty (EMC) – Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity testsAccepted
BS EN 61000-4-16 A3 Electromagnetic compatibilty (EMC) – Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHzsAccepted
BS EN 61000-4-19 ED 1 Electromagnetic compatibility (EMC) Part 4-19 - Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances in the frequency range from 2 kHz to 150 kHz, at a.c. portsPublication
BS EN 61000-4-24 ED 2.0 Electromagnetic Compatibility (EMC) - Part 4-24: Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbancePublic Comment
BS EN 61000-4-30 ED 3 Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methodsPublic Comment
BS EN 61000-4-31 Electromagnetic compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity testPublic Comment
BS EN 61000-4-36 Electromagnetic Compatibility (EMC) - Part 4-36: Testing and measurement techniques - IEMI Immunity Test Methods for Equipment and SystemsPublic Comment
BS EN 61000-4-37 Electromagnetic compatibility (EMC) - Part 4-37: Testing and measurement techniques - Calibration and verification protocol for harmonic emission compliance test systemsPublic Comment
BS EN 61000-4-39 Ed. 1.0 Electromagnetic compatibilty (EMC) – Part 4-39: Testing and measurement techniques – Radiated fields in close proximity immunity testPublic Comment
BS EN 61000-4-5 ED 3.0 Electromagnetic compatibility - Part 4-5: Testing and measurement techniques - Surge immunity testApproval
BS EN 61000-6-3 ED 2.0/A2 Ed 2 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environmentsPublic Comment
BS EN 61000-6-4 ED 2.0/A2 Ed 2 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environmentsPublic Comment
BS EN 61010-2-202 Ed. 1.0 IEC 61010-2-202 Ed. 1.0 Safety requirements for electrical equipment for measurement, controland laboratory use - Part 2-2 xx: Particular requirements for electrically operated valve and actuatorAccepted
BS EN 61014 Programmes for reliability growthAccepted
BS EN 61069-1 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment -Part 1:Terminology and basic conceptsAccepted
BS EN 61069-2 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 2: Assessment methodologyAccepted
BS EN 61069-3 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 3: Assessment of system functionalityAccepted
BS EN 61069-4 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 4: Assessment od system performanceAccepted
BS EN 61069-5 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 5: Assessment of system dependabilityAccepted
BS EN 61069-6 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 6: Assessment of system operabilityAccepted
BS EN 61069-7 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 7: Assessment of system safety hazardAccepted
BS EN 61069-8 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 8: Assessment of other system propertiesAccepted
BS EN 61078 Ed 3.0 Analysis techniques for dependability - Reliability block diagram and Boolean methodsAccepted
BS EN 61082-1 Preparation of documents used in electrotechnology - Part 1: RulesApproval
BS EN 61131-2 Ed 4.0 Industrial-process measurement and control - Programmable controllers Part 2: Equipment requirements and testsAccepted
BS EN 61140 Ed 4.0 Protection against electric shock – Common aspects for installation and equipmentPublic Comment
BS EN 61156-10 Ed1.0 pair/quad cables for digitial communications Part 10: Cables for work area wiring with transmission characteristics up to 2 GHz - Sectional specificationPublic Comment
BS EN 61156-9 Ed1.0 pair/quad cables for digitial communications Part 9: Cables for horizontal floor wiring with transmission characteristics up to 2 GHz - Sectional specificationPublic Comment
BS EN 61167 Am1 Metal halide lamps - Performance specificationAccepted
BS EN 61167+A1 Metal halide lamps - Performance specificationPublic Comment
BS EN 61169-47 Ed 2.0 Radio-Frequency Connectors Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 ? cable networks (type F- Quick)Public Comment
BS EN 61169-48 Ed.1 Radio-frequency connectors - Part 48: Sectional specification for BMP Series Blind mating R.F. coaxial connectorsPublic Comment
BS EN 61169-49 Ed 1.0 Radio-frequency connectors - Part 49: Sectional specification for SMAA series R.F connectorsPublication
BS EN 61169-50 Ed1.0 Radio-frequency connectors Part 50: Sectional specifications RF coaxial connectors with inner diameter of outer conductors 4.11 mm with quick lock system. Characteristics impendance 50 Ohm (type QMA)Public Comment
BS EN 61169-51 Ed.1 Radio-frequency connectors - Part 51: Sectional specifications RF coaxial connectors with inner diameter of outer conductors 13.5 mm with bayonet lock characteristics impedamce 50 Ohm (type QLI)Public Comment
BS EN 61169-52 Ed1.0 Radio- Frequency Connectors Part 52: Sectional specification for series MMCX RF coaxial connectorsPublic Comment
BS EN 61169-54 RADIO-FREQUENCY CONNECTORS Part 54: Sectional Specification for Coaxial Connectors with 10mm inner of outer Conductor,nominal Characteristic Impedance 50 Ohms, Series 4.3- 10Public Comment
BS EN 61175 Industrial systems, installations and equipment and industrial products - Designation of signalsPublic Comment
BS EN 61195+A2 Safety specificationsPublic Comment
BS EN 61196-1-110 Ed. 1.0 Coaxial communication cables Part 1-110: Electrical test methods - Test for continuityIdea
BS EN 61196-1-114 Ed. 1.0 Coaxial communication cables Part 1-114: Electrical test methods - InductanceAccepted
BS EN 61196-1-116 Ed. 1.0 Coaxial communication cables Part 1-116: Electrical test methods - Test for characteristic impedance with time domain reflectometry (TDR)Accepted
BS EN 61196-1-209 Ed. 1.0 Coaxial communication cables Part 1-209: Environmental test methods - Thermal cyclingAccepted
BS EN 61196-1-215 Ed.1 Coaxial communication cables - Environmental test methods Part 1-215: High Temperature Cable AgeingIdea
BS EN 61196-1-314 Ed2.0 Coaxial communication cables Part 1-314: Mechanical test methods - Test for bendingAccepted
BS EN 61196-10 Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polyterafluoroethylene (PTFE) dielectricApproval
BS EN 61196-11 Ed1.0 Coaxial communication cables Part 11: Sectional specification for semi-rigid cables with polyethylene (PE) dielectricPublic Comment
BS EN 61196-11-1 Ed.1 Coaxial communication cables Part 11-1: Blank detail specification for semi-rigid cables with polyethylene (PE) dielectricPublic Comment
BS EN 61196-4-1 Ed1.0 Coaxial communication cables Part 4-1: Blank detail specification for radiating cablesPublic Comment
BS EN 61196-9-1 Ed. 1.0 Coaxial communication cables Part 9-1: Blank detail specification for flexible RF coaxial cablesAccepted
BS EN 61199+A2 Safety specificationsPublic Comment
BS EN 61204-7 Low-voltage switch mode power supplies - Part 7: Safety requirementsAccepted
BS EN 61245 Artificial pollution tests on high-voltage insulators to be used on d.c systemAccepted
BS EN 61251 Electrical insulating materials - A.C. voltage endurance evaluationnull
BS EN 61360-1 Standard data elements types with associated classification scheme forelectric items - Part 1: Definitions - Principles and methodsAccepted
BS EN 61360-6 QIEC Common Data Dictionary (IEC CDD) Quality guidePublic Comment
BS EN 61466-1 Composite string insulator units for overhead lines with a nominalvoltage greater that 1000 V - Part 1: Standard strength and end fittingsAccepted
BS EN 61511-1 ED.2.0 Functional Safety - Safety instrumented systems for the process industrysector - Normative Part 1: Framework, definitions, system, hardware and software requirementsPublic Comment
BS EN 61511-2 ED.2.0 Functional Safety - Safety instrumented systems for the process industrysector - Normative Part 2: Guidelines for the application of IEC 61511-1 - InformativePublic Comment
BS EN 61511-3 ED.2.0 Functional Safety - Safety instrumented systems for the process industrysector - Normative Part 3: Guidance for the determination of the required safety integrity levels - InformativePublic Comment
BS EN 61643-22 Ed 2.0 Low-voltage surge protective devices Part 22: Surge protective devices connected to telecommunications and signalling networks - Selection and application principlesPublic Comment
BS EN 61643-31 Low-voltage surge protective devices Part 31: Requirements and test methods for SPDs for photovoltaic installationsAccepted
BS EN 61643-331 Components for low-voltage surge protective devices - Part 331: Performance requirements and test methods for metal oxide varistors (MOV)Accepted
BS EN 61643-351 Components for low-voltage surge protective devices Part 351: Performance requirements and test circuits for lightning isolation transformers (LIT)Accepted
BS EN 61703 Ed 2.0 Mathematical expressions for reliability; availability; maintainability and maintenance support termsAccepted
BS EN 61709 Ed 3.0 Electric components - Reliability - Reference conditions for failure rates and stress models for conversionAccepted
BS EN 61726 ED.2 Cable assemblies, cables, connectors and passive coponents - screening attentuation measurement by the reverberation chamber methodPublic Comment
BS EN 61800-2 Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adj ustable frequency a.c. power drive systemsPublic Comment
BS EN 61800-3:2004+A1:2012+A2 Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methodsnull
BS EN 61800-5-1 Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energyIdea
BS EN 61800-5-2 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - FunctionalAccepted
BS EN 61800-7-1 Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definitionPublic Comment
BS EN 61800-7-1 Ed 2.0 Adjustable speed electrical power drive systems Part 7-1: Generic interface and use of profiles for power drive systems - Interface definitionPublic Comment
BS EN 61800-7-201 Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specificationPublic Comment
BS EN 61800-7-202 Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specificationPublic Comment
BS EN 61800-7-203 Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specificationPublic Comment
BS EN 61800-7-204 Adjustable speed electrical power drive systems - Part 7-204: Generic interface and use of profiles for power drive systems - Profile type 4 specificationPublic Comment
BS EN 61800-7-301 Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologiesPublic Comment
BS EN 61800-7-302 Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologiesPublic Comment
BS EN 61800-7-303 Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologiesPublic Comment
BS EN 61800-7-304 Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologiesPublic Comment
BS EN 61803:1999+A1:2010+ A2 Determination of power losses in high-voltage direct current (HVDC) converter stationsAccepted
BS EN 61810-1 ED 4.0 Electromechanical elementary relays – Part 1: General requirementsPublic Comment
BS EN 61837-3 Surface mounted piezoelectric devices for frequency control and selecti0n - Standard outlines and terminal lead connections Part 3: Metal enclosurePublic Comment
BS EN 61837-4 Surface mounted piezoelectric devices for frequency control and selection - Standard outline and terminal lead connections Part 4: Hybrid enclosure outlinePublic Comment
BS EN 61850-3 Communication networks and systems for power utility automation Part 3: General requirementsPublication
BS EN 61850-7-4/A1 Communication networks and systems in substations Part 7-4 Basic communicaiton structure for substation and feeder equipment - Compatible logical node classes and data classesPublic Comment
BS EN 61850-7-4/A2 Communication networks and systems in substations Part 7-4 Basic communicaiton structure for substation and feeder equipment - Compatible logical node classes and data classesPublic Comment
BS EN 61850-7-410 Ed 2.0 /A1 Amendment 1 to IEC 61850-7-410 Ed.2: Communication networks and systems for power utility automation Part 7-410: Basic communication structure - Hydroelectric power plants - Communication for monitoring and controlAccepted
BS EN 61850-90-8 Communication networks and systems for power utility automation Part 90-8: IEC 61850 object models for electric mobilityPublic Comment
BS EN 61882 Ed 2.0 Hazard and operability studies (HAZOP studies) - Application guideAccepted
BS EN 61935-1 Ed.4 TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH ISO/IEC 11801 Part 1: Installed cablingPublic Comment
BS EN 61935-2-21 Ed.1 Generic cabling systems — Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-21: Cord and work area cord category 6- Blank detail specificationPublic Comment
BS EN 61935-2-22 Ed.1 Generic cabling systems — Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-22: Cord and work area cord category 6A- Blank detail specificationPublic Comment
BS EN 61935-2-23 Ed.1 Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-23: Cord and work area cord category 7- Blank detail specificationPublic Comment
BS EN 61935-2-24 Ed.1 Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-24: Cord and work area cord category 7A- Blank detail specificationPublic Comment
BS EN 61935-2-25 Ed1.0 Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-25: Work area with M12 4 poles connectors Blank detail specificationAccepted
BS EN 61968-6 Application integration at electric utilities - System interfaces for distribution management Part 6: Interfaces for maintenance and constructionPublic Comment
BS EN 61968-6 Application integration at electric utilities - System interfaces for distribution management Part 6: Interfaces for maintenance and constructionPublic Comment
BS EN 61968-8 ED 1.0 Application integration at electric utilities - System interfaces for distribution management Part 8: Interface Standard For Customer SupportPublic Comment
BS EN 61970-301 Ed 5.0 Energy management system application program interface (EMS-API) Part 301: Common information model (CIM) basePublication
BS EN 61970-452 Ed 2 Energy Management System Application Program Interface (EMS-API) Part 452: CIM static transmission network model profilesPublic Comment
BS EN 61970-452 Ed 2.0 Energy Management System Application Program Interface (EMS-API) - Part 452: CIM static transmission network model profilesPublic Comment
BS EN 61970-502-8 Energy Management System Application Program Interface(EMS-API) Part 502-8: Web Services Profile for 61970-4 Abstract ServicesAccepted
BS EN 61970-555 Energy management system application program interface (EMS-API) - Part 555: CIM based efficient model exchange format (CIM/E)Accepted
BS EN 61970-556 Energy management system application program interface (EMS-API) - Part 556: CIM based graphic exchange format (CIM/G)Idea
BS EN 61975:2010+A1 High-voltage direct current (HVDC) installations - System testsAccepted
BS EN 62031+A2 LED modules for general lighting - Safety specificationsApproval
BS EN 62035 ED 2.0+A3 Discharge lamps (excluding fluorescent lamps) - Safety specificationsPublication
BS EN 62040-1 Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPSPublic Comment
BS EN 62040-2 Ed3.0 Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility requirements (EMC)Accepted
BS EN 62040-5-3 Ed1.0 Uninterruptible power systems (UPS) - Part 5-3: Method of specifying the performance and test requirements for d.c. UPSAccepted
BS EN 62052-31 62052-31 Electricity metering equipment (AC) - General requirements, test and test conditions Part 31: Product safety requirementsPublic Comment
BS EN 62053-24 ED 1.0 Electricity metering equipment (a.c.) - Particular requirements Part 24: Static meters for reactive energy (classes 0,5 S, 1 S and a)Publication
BS EN 62055-41 ELECTRICITY METERING - PAYMENT SYSTEMS Part 41: Standard transfer specification (STS) - Application layer protocol for one-way token carrier systemsPublic Comment
BS EN 62056-1-0 ELECTRICITY METERING DATA EXCHANGE – The DLMS/COSEM suite Part 1-0: Smart metering standardization frameworkPublication
BS EN 62056-4-7 Electricity metering - Data exchange for meter reading; tariff and load control Part 4-7: COSEM transport layers for IPv4 networksPublic Comment
BS EN 62056-5-3 Ed 1.0 /A1 ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE Part 5-3: DLMS/COSEM application layerPublic Comment
BS EN 62056-6-1 Ed 1.0 /A1 Ammendment 1: Electricity Metering Data Exchange - The DLMS/COSEM Suite Part 6-1: Object Identification System (OBIS)Public Comment
BS EN 62056-6-2 Ed 1.0 /A1 Ammendment 1 - Electricity metering data exchange - The DLMS/COSEM suite -Part 6-2: COSEM interface classesPublic Comment
BS EN 62056-7-5 Ed1.0 The DLMS/COSEM suite Part 7-5: Communication profiles for local data transmissionPublic Comment
BS EN 62056-8-6 ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE Part 8-X: DMT PLC profile for neighbourhood networksAccepted
BS EN 62153-4-10 Ed2 Metallic Communication Cable Test Methods Part 4-10: Electromagnetic compatability (EMC) - Shielded screening attenuation test method for measuring the screening effectiveness of feed-throughs and electromagnetic gaskets double coaxial methodPublic Comment
BS EN 62153-4-7 Ed.2 Metallic Communication Cable test methods Part 4-7: Electromagnetic compatibility (EMC) - Shielded screening attenuation test method for measuring the Transfer impedance Zt and the screening attenuation aS or the Coupling attenuation aC of RF-Connectors and assemblies up to and above 3 GHz; Tube in Tube methodPublic Comment
BS EN 62231-1 Composite station post insulators for substations with ac voltages greater than 1 000 V up to 245 kV – Part 1: Dimensional, mechanical and electrical characteristicsPublic Comment
BS EN 62317-11 Ferrite cores - Dimensions Part 11: EC-cores for use in power supply applicationsAccepted
BS EN 62317-13 Ferrite cores - Dimensions Part 13: PQ-cores for use in power supply applicationsAccepted
BS EN 62317-5 Ferrite cores - Dimensions Part 5: EP-cores and associated parts for use in inductors and transformersAccepted
BS EN 62317-6 Ferrite cores - Dimensions Part 6: ETD-cores for use in power suppliesAccepted
BS EN 62325-301 Framework for energy market communications Part 301: Common Information Model (CIM) Extensions for MarketsPublication
BS EN 62325-451-2 Framework for energy market communications Part 451-2: Scheduling business process and contextual models for CIM European marketPublic Comment
BS EN 62325-451-3 Framework for energy market communications Part 451-3: Transmission capacity allocation business process (explicit or implicit auction) and contextual models for European marketPublication
BS EN 62325-451-4 Framework for energy market communications Part 451-4: Settlement and reconciliation business process; contextual and assembly models for European marketPublic Comment
BS EN 62325-451-5 Framework for energy market communications Part 451-5: Problem statement and status request business processes; contextual and assembly models for European marketPublic Comment
BS EN 62333-2:2006+A1 Noise suppression sheet for digital devices and equipment Part 2: Measuring method Amendment 1Accepted
BS EN 62351-3 Power systems management nd associated information exchange - Data andcommunications security Part 3 : Communication network and system security - Profiles including TCP/IPPublic Comment
BS EN 62361-100 ED 1.0 Harmonization of Quality Codes across TC 57 - Part 100: Naming and design rules for CIM profiles to XML schema mappingPublication
BS EN 62361-101 Power systems management and associated information exchange - Interoperability in the long term Part 101: Common Information Model ProfilesAccepted
BS EN 62424 Ed 2.0 control engineering - Request in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools.Public Comment
BS EN 62443-2-4 Security for industrial process measurement and control - Network and system security Part 2-4: Certification of IACS supplier security policies and practicesPublication
BS EN 62443-3-2 Industrial communication networks - Network and system security Part 3-2: Security assurance levels for zones and conduitsPublic Comment
BS EN 62477-1:2012+A1 Safety requirements for power electronic converter systems and equipment- Part 1: GeneralPublic Comment
BS EN 62477-1:2012+A1 Safety requirements for power electronic converter systems and equipment- Part 1: GeneralApproval
BS EN 62477-2 Safety requirements for power semiconductor converter systems - Safety requirements for power semiconductor converter systems - Part 2: Power Electronic Converters from 1000 V a.c. or 1500 V d.c. up to 35 kVIdea
BS EN 62493 Ed 2.0 Assessment of lighting equipment related to human exposure to electromagnetic fieldsPublic Comment
BS EN 62501 ED 1.0/A1:2009+A1 Voltage sourced converter (VSC) valves for high-voltage direct current direct current(HVDC) power transmission - Electrical testingPublic Comment
BS EN 62504 General lighting - Light emitting diode (LED) products and related equipment - Terms and definitionsPublication
BS EN 62532+A1 Fluorescent induction lamps - Safety specificationsAccepted
BS EN 62536 Coordinated telebiometric multimodal interaction databasenull
BS EN 62550 Spare parts provisioningAccepted
BS EN 62550 Spare Parts ProvisioningAccepted
BS EN 62559-2 Use case methodology Part 2: Definition of use case template; actor list and requirement listPublic Comment
BS EN 62560+A1 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications Amendment 1Public Comment
BS EN 62575-1 Radio frequency (RF) buk acoustic wave (BAW) filters of assessed quality Part 1: Generic specificationPublic Comment
BS EN 62604-1 Surface Acoustic Wave (SAW) and Bulk Acoustic Wave (BAW) duplexers - Part 1: Generic specificationPublic Comment
BS EN 62609-1 Insulators for overhead lines - Composite line post insulators Part 1 - Definitions, End Fittings and Designationsnull
BS EN 62612 +A1 Self-ballasted LED lamps for general lighting services with supply voltages IECXXXYYY2 50V - Performance requirements Amendment 1Accepted
BS EN 62631-3-1 Guidelines for the determination of dielectric and resistive properties of solid insulating materials Part 3-1: Determination of resistive properties (DC Methods) - Volume resistance and volume resistivity, general methodAccepted
BS EN 62631-3-2 Guidelines for the determination of dielectric and resistive properties of solid insulating materials Part 3-2: Determination of resistive properties (DC Methods) - Surface Resistance and Surface ResistivityAccepted
BS EN 62631-3-3 Guidelines for the determination of dielectric and resistive properties of solid insulating materials Part 3-3: Determination of resistive properties (DC Methods) - Insulation ResistanceAccepted
BS EN 62643-1 ELECTROSTATIC MICRO ELECTRO MECHANICAL SYSTEMS (MEMS) OSCILLATORS OF ASSESSED QUALITY - Part 1: Generic specificationAccepted
BS EN 62656-1 Standardized product ontology register and transfer by spreadsheets - Part 1:Logical structure for data parcelsPublication
BS EN 62656-3 Standardized product ontology register and transfer by spreadsheets - Part 3:Interface for Common Information ModelApproval
BS EN 62656-5 Standardized product ontology register and register by spreadsheets - Part 5: Interface for activity descriptionAccepted
BS EN 62663-1 Non-self-ballasted LED lamps Part 1: Safety requirementsPublic Comment
BS EN 62663-2 Non-ballasted single capped LED lamps for general lighting - Part 2: Performance requirementsAccepted
BS EN 62677-1 Heat shrinkable low and medium voltage moulded shapes Part 1: General requirementsApproval
BS EN 62677-2 Heat shrinkable low and medium voltage moulded shapes Part 2: Methods of testPublic Comment
BS EN 62682 ED 1.0 Management of alarms for the process industryApproval
BS EN 62708 Documents for electrical and instrumentation projects in the process industryPublic Comment
BS EN 62717 LED modules for general lighting - Performance requirementsPublic Comment
BS EN 62740 Root Cause Analysis (RCA)Public Comment
BS EN 62741 Guide to the demonstration of dependability requirements. The dependability casePublic Comment
BS EN 62744 Representation of states of objects by graphic symbolsApproval
BS EN 62746 System interfaces and communication protocol profiles relevant for systems connected to the Smart GridIdea
BS EN 62746-3 System interfaces and communication protocol profiles relevant for systems connected to the Smart GridAccepted
BS EN 62747 Terminology for voltage-sourced converters (VSC) for HVDC systemsPublic Comment
BS EN 62751-1 Determination of power losses in voltage sourced converters (VSC) for HVDC systems - Part 1: General requirementsPublic Comment
BS EN 62751-2 Determination of power losses in voltage sourced converter (VSC) valves for HVDC systems - Part 2: Modular multilevel convertersPublic Comment
BS EN 62772 Composite hollow core station post insulators for substations with a.c. and d.c.voltages greater than 1 000 V - Definitions, test methods and acceptance criteriaAccepted
BS EN 62776 Double-capped LED lamps for general lighting services - Safety specificationsPublic Comment
BS EN 62783-1Ed.1 TWINAX CABLES FOR DIGITAL COMMUNICATIONS - Part 1: GENERIC SPECIFICATIONPublic Comment
BS EN 62786 Smart Grid User Interface: Demand Side Energy Sources Interconnection with the GridAccepted
BS EN 62810 Ed.1 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rodsPublic Comment
BS EN 62823 Thyristor valves for thyristor controlled series capacitors (TCSC) - Electrical testingPublication
BS EN 62832 Industrial-process measurement; control and automation - Reference model for representation of production facilities (Digital Factory)Accepted
BS EN 62838 Self-ballasted LED-lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. - Safety specificationPublic Comment
BS EN 62868 Organic light emitting diode (OLED) panels for general lighting - Safety requirementsApproval
BS EN 62881 Cause & Effect TableAccepted
BS EN 62909-1 Bi-directional grid connected power converter - Part 1: General requirements for bi-directional grid connected power converterIdea
BS EN 62922 Organic light emitting diode (OLED) panels for general lighting - Performance requirementsAccepted
BS EN 62927 Ed1.0 Voltage sourced converter (VSC) valves for static synchronouscompensator (STATCOM) - Electrical testingIdea
BS EN 65700-19-03 Bushings for DC applicationPublication
BS EN 80003-4 Quantities for e-health Part 4: BiologyAccepted
BS EN 81346-2 and equipment and industrial products- Structuring principles and reference designations - Part 2: Classification of objects and codes for classesIdea
BS EN 82079-1 Ed 2.0 Preparation of instructions for use - Structuring, content andpresentation - Part 1: General principles and detailed requirementsIdea
BS EN CISPR/TR 16-4-5 A1/ED1 Specification for radio disturbance and immunity measuring apparatus andmethods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions forthe use of alternative test methodsApproval
BS EN WI 00088357 Thermal insulation products for buildings - Factory made reflective insulation products (RI) - SpecificationIdea
BS ENISO 12572 Hygrothermal performance of building materials and products - Determination of water vapour transmission properties (ISO 12572:2001)Idea
BS ENISO 6781-3 Performance of buildings - Detection of heat, air and moisture irregularities in buildings by infrared methods Part 3: Qualifications of Equipment Operators, Data Analysts and Report WritersPublic Comment
BS ENISO 7345:1995/A1 Thermal insulation - Physical quantities and definitions (ISO 7345:1987)Accepted
BS ENISO 80000-7 Quantities and units Part 7: LightIdea
BS ENISO 9972 Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization methodPublic Comment
BS IEC 60050-692 International Electrotechnical Vocabulary Part 692: Electric power systems: dependability and quality of serviceIdea
BS IEC 60050-726 Ed2.0 IEC 60050-726. International electrotechnical vocabulary. Transmissionlines and waveguidesPublic Comment
BS IEC 60364-7-712 Low-voltage electrical installations - Part 7-712: Requirements for special installations or locations Photovoltaic (PV) power systemsAccepted
BS IEC 60695-11-20 Ed2.0 Fire hazard testing Part 11-20: Test flames - 500 W flame test methodsPublic Comment
BS IEC 61169-45 Ed1.0 Radio-frequency connectors Part 45: Sectional specification for series SQMA series quick lock RF coaxial connectorsPublic Comment
BS IEC 61196-10-1 Ed1.0 Coaxial Communication Cables Part 10-1: Blank detail specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectricApproval
BS IEC 61338-1-5 Ed1.0 Waveguide type dielectric resonators Part 1-5:General information and test conditions - Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequencyPublic Comment
BS IEC 61810-3 Ed1.0 (mechanically linked) contactsPublic Comment
BS IEC 61811-1 Ed2.0 relays of assessed quality Part 1: Generic Specification and blank detail specificationPublic Comment
BS IEC 62153-4-15 Ed.1 Metallic Communication Cable test methods Part 4-15: Electromagnetic compatibility (EMC) – Test method for measuring transfer impedance and screening attenuation – or coupling attenuation with Triaxial CellPublic Comment
BS IEC 62246-1 Ed3.0 Reed switches Part 1: Generic specificationPublic Comment
BS IEC 62798 Ed1.0 ED 1.0 Industrial electroheating equipment - Test methods for infrared emittersPublic Comment
BS ISO 14835-1:2005/Amd 1 Mechanical vibration and shock - Cold provocation tests for the assessment of peripheral vascular function Part 1: Measurement and evaluation of finger skin temperature - Amendment 1Accepted
BS ISO 16852 Flame arresters - Performance requirements, test methods and limits for useAccepted
BS ISO 2017-3 Mechanical vibration and shock - Resilient mounting systems - Part 3: Technical information to be exchanged for application of vibration isolation to new buildingsAccepted
BS ISO 29865 Coordinated telebiometric multimodal interaction databasenull
BS ISO 80000-12 Quantities and units Part 12: Solid state physicsAccepted
BS ISO 80000-5 Quantities and units Part 5: ThermodynamicsAccepted
BS ISO 80003-2 Physiological quantities and their units Part 2: PhysicsPublication
BS ISO 80003-2 Physiological quantities and their units Part 2: PhysicsAccepted
BS ISO 80003-3 Physiological quantities and their units Part 3: ChemistryPublication
BS ISO 80003-3 Physiological quantities and their units Part 3: ChemistryAccepted
BS ISO 8727:1997/Amd 1 Mechanical vibration and shock - Human exposure - Biodynamic coordinate systems - Amendment 1Accepted
BS ISO/IEC 80079-20-2Public Comment
BS ISO/IEC 80079-36 Explosive atmospheres Part 36: Non-electrical equipment for use in explosive atmospheres - Basic methods and requirementsApproval
BS ISO/IEC 80079-37 Explosive atmospheres Part 37: Non-electrical equipment for use in explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k'Approval
BS ISO/IEC 80079-38 Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground minesApproval
BSEN60695-1-12 ED 1.0 Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineeringPublic Comment
BSEN61970-302 ED 1.0 Energy management system application program interface (EMS-API) Part 302: Common information model (CIM) financial, energy scheduling and reservationsPublic Comment
PD CEN/TS 15548-1 Thermal insulation products for building equipment and industrial installations - Determination of thermal resistance by means of the guarded hot plate method Part 1: Measurements at elevated temperatures from 100 °C to 850 °CPublication
PD CISPR/TR 16-4-4/Am 1 Ed. 2.0 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio servicesAccepted
PD CLC/TR 60079-32-1 Explosive atmospheres Part 32-1: Electrostatic Hazards - GuidancePublication
PD CLC/TR 60079-33 Explosive atmospheres Part 33: Equipment protection by special protection 's'Publication
PD CLC/TS 50568-4 Electricity metering data exchange - The DLMS/COSEM suite Part 4: Physical Layer based on SMITP B-PSK modulation and SMITP Data Link LayerApproval
PD CLC/TS 50568-8 Electricity metering data exchange - The DLMS/COSEM suite Part 8: PLC profile based on SMITP B-PSK modulationApproval
PD CLC/TS 50590 Electricity metering data exchange - Lower layer PLC profile using adaptive multi-carrier spread spectrum for CX1 networksApproval
PD CLC/TS 52056-8-4 Electricity metering data exchange -- The DLMS/COSEM suite Part 8-4: The narrow-band OFDM PLC profiles for PRIME networksApproval
PD CLC/TS 52056-8-5 Electricity metering data exchange -- The DLMS/COSEM suite Part 8-5: The narrow-band OFDM PLC profile for G3-PLC networksApproval
PD CLC/TS 52056-8-7 Electricity metering data exchange - The DLMS/COSEM suite Part 8-7: The adaptive multi-carrier spread-spectrum PLC profile for CX1 networksApproval
PD CLC/TS 60034-25 Rotating electrical machines Part 25: A.C. Motors when used in power drive systems - Application guid eApproval
PD CLC/TS 62896 Hybrid insulators for a.c. and d.c. applications with voltage greater than 1 000 V-- Definitions, test methods and acceptancecriteriaAccepted
PD EN PAS CCFL Cold cathode fluorescent lamps (CCFL) Performancenull
PD EN PAS CCFL Cold cathode fluorescent lamps (CCFL) Safetynull
PD EN PAS EEFL External Electrode Fluorescent Lamp (EEFL) Performancenull
PD EN PAS EEFL External Electrode Fluorescent Lamp (EEFL) Safetynull
PD IEC/PAS 62515 Requirements concerning the interoperability between electromechanical and electrical applications in CAx-systems - Maintenance of project 62515 including development of IEC/TS 62515Idea
PD IEC/PAS 62816-1 Ed 1.0 External Electrode Fluorescent Lamps Part 1: Safety SpecificationsApproval
PD IEC/TR 60893-4 ED 2.0 Insulating materials - Industrial rigid laminated sheets based on thermo setting resins for electrical purposes - Part 4: Typical valuesPublication
PD IEC/TR 60919-2 :2008+A1 Performance of high-voltage direct current (HVDC) systems withline- commutated converters - Part 2: Faults and switchingPublication
PD IEC/TR 60919-3 ED2.0/A1 Performance of high-voltage direct current (HVDC) systems withline-commutated converters - Part 3: Dynamic conditionsAccepted
PD IEC/TR 61000-4-38 Electromagnetic Compatibility (EMC) - Testing and measurement techniques- Calibration and Verification Protocol for Flicker Compliance test systems Part 1: General requirements and methods of testAccepted
PD IEC/TR 61156-1-2:2009+A1 symmetrical pair/quad cables for digital communications Part 1-2: Electrical transmissoin characteristics and test methods of symmetrical pair/quad cablesApproval
PD IEC/TR 61156-1-6 Ed1.0 pair/quad cables for digital communications Part 1-6: Exploratory DC-resistance values of floor-wiring and work-area cables for digital communicationsAccepted
PD IEC/TR 61850-7-500 Use of logical nodes for modelling applications and related concepts andguidelines for substationsnull
PD IEC/TR 61850-90-2 Use of IEC 61850 for the communication between substations and control centresnull
PD IEC/TR 61850-90-3 Using IEC 61850 for condition monitoring diagnosis and analysisnull
PD IEC/TR 61857-2 Electrical insulation systems - Procedures for thermal evaluation Part 2: Selection of the appropriate test method for evaluation and classification of electrical insulation systemsAccepted
PD IEC/TR 62001-1 Ed1.0 High-voltage direct current (HVDC) systems - Guidebook to the specification and design evaluation of A.C. filters - Part 1: OverviewIdea
PD IEC/TR 62001-4 Ed1.0 High-voltage direct current (HVDC) systems - Guidebook to the specification and design evaluation of A.C. filters - Part 4: EquipmentIdea
PD IEC/TR 62153-4-16 Ed1.0 METALLIC COMMUNICATION CABLE TEST METHODS Part 4-16: Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-upApproval
PD IEC/TR 62443-2-3 Ed 1.0 Industrial communication networks - Network and system security Part 2-3: Patch management in the IACS environmentPublication
PD IEC/TR 62511 ED 1.0 A white paper - Power system reliability in a deregulated electricity market environmentPublication
PD IEC/TR 62544 Ed 1.0/A1 High-voltage direct current (HVDC) systems - Application of activefiltersIdea
PD IEC/TR 62681 Electromagnetic Environment Criterion for High-voltage Direct Current (HVDC) Overhead Transmission LinesPublication
PD IEC/TR 62757 Fire prevention measures on converters for high-voltage direct current (HVDC) systems, static var compensators (SVC) and flexible AC transmission systems (FACTS) and their valve hallsPublication
PD IEC/TS 60034-30-2 Ed 1.0 Rotating electrical machines Part 30-2: Efficiency classes of variable speed AC motors (IE-code)Accepted
PD IEC/TS 60034-32 Rotating electrical machines - Part 32: Measurement of stator end winding vibration at form wound windingsIdea
PD IEC/TS 60079-40 Ed 1.0 Explosive atmospheres - Requirements for Process Sealing Between Flammable or Combustible Process Fluids and Electrical SystemsAccepted
PD IEC/TS 60216-7-1 Electrical insulation materials - Thermal endurance properties Part 7-1: Accelerated determination of thermal endurance index (TI) and relative thermal endurance (RTE) using analytical test methods - Calculating procedures for TI and RTE based on activation energyApproval
PD IEC/TS 60695-2-20 Fire hazard testing -- Part 2-20: Glowing/hot wire based test methods - Hot wire coil ignitability - Apparatus, confirmatory test arrangement and guidanceIdea
PD IEC/TS 60695-6-2 ED 3.0 TR Fire hazrd testing - Part: 6-2: Smoke obscuration - Summary and relevance of test methodsAccepted
PD IEC/TS 60815-4 ED 1.0 Selection and dimensioning of high-voltage insulators intended for usein polluted conditions - Part 4: Insulators for d.c. systemsIdea
PD IEC/TS 61244-1 Determination of long-term radiation ageing in polymers - Part 1: Techniques for monitoring diffusion-limited oxidationApproval
PD IEC/TS 61244-2 Determination of long-term radiation ageing in polymers Part 2: Procedures for predicting ageing at low dose ratesApproval
PD IEC/TS 61463 Ed2.0 Bushings-Seismic QualificationAccepted
PD IEC/TS 61580-10-2 Communication networks and systems for power utility automation Part 10-2: Interoperability test for hydro equipments based on IEC 61850null
PD IEC/TS 61850-10-210 Ed 1.0 Communication networks and systems for power utility automation Part 10-210: IEC 61850 Interoperability tests - Hydro profileAccepted
PD IEC/TS 61968-14 Ed1.0 utilities - System interfaces fordistribution management Part 14: MultiSpeak - CIM harmonisationAccepted
PD IEC/TS 62040-4-1 Ed 1.0 Uninterruptible power systems (UPS) - Part 4-1: Environmental aspects - Product category rules (PCR) for life cycle assessmentAccepted
PD IEC/TS 62056-9-1 Electricity metering data exchange Part 9-1: Communication Profile using web-services to access a DLMS/COSEM Server via a COSEM Access Service (CAS)Accepted
PD IEC/TS 62073 Guidance on the measurement of hydrophobicity of insulator surfaces Part 2: Faults and switchingAccepted
PD IEC/TS 62153-4-1 Metallic communication cable test methods Part 4-1: Introduction to Electromagnetic (EMC) Test MethodsPublication
PD IEC/TS 62325-504 Ed 1.0 Framework for energy market communications Part 504: Utilization of web services for electronic data interchanges on the European energy market for electricityAccepted
PD IEC/TS 62351-5 Power systems management and associated information exchange – Data and communications security Part 5: Security for IEC 60870-5 and derivativesPublication
PD IEC/TS 62351-9 Power systems management and associated information exchange – Data and and communications security – Part 9: Cyber security key management for power system equipmentAccepted
PD IEC/TS 62443-1-3 Industrial communication networks - Network and system security Part 1-3: System security compliance metricsApproval
PD IEC/TS 62578 Power electronics systems and equipment - Operation conditions and characteristics of active infeed converter applicationsincluding recommendations for emission limits below 150 kHz.Approval
PD IEC/TS 62612 Self-ballasted LED-lamps for general lighting services >50 V - Performan ce requirementsIdea
PD IEC/TS 62749 Ed 1.0 Assessment of power quality - Characteristics of electricity supplied by public networksApproval
PD IEC/TS 62775 Ed 1.0 Dependability Management - Application guide - Dependability and Financial Processes for implementing Asset Management SystemsAccepted
PD IEC/TS 62872 Ed 1.0 Industrial process measurement; control and automation - System interface between Industrial Facilities and the Smart Grid.Accepted

[ back to top ]

Published standards (68)

Sort by: Reference | Title | Status

Standard referenceNameStatus
BS 142-1-1.1:1982Electrical protection relays. Information and requirements for all protection relays - Glossary of protection relay termsWithdrawn
BS 4727-1:Group 01:1983Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics - Fundamental terminologyWithdrawn
BS 4727-1:Group 02:1980Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics - Electrical and magnetic devices terminologyWithdrawn
BS 4727-1:Group 03:1971Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics - Relay terminologyWithdrawn
BS 4727-1:Group 07:1991Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics - Magnetic materials and componentsCurrent
BS 4727-1:Group 09:1991Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics - Electromagnetic compatibilityWithdrawn
BS 4727-1:Group 10:1991Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics - Insulating solids, liquids and gasesWithdrawn
BS 4727-1:Group 12:1991Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics - InsulatorsCurrent, Work in Hand
BS 4727-2 Group 03:1971Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Rotating machinery terminologyWithdrawn
BS 4727-2:Group 04:1991Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Power transformers and reactorsCurrent
BS 4727-2:Group 05:1972Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Voltage fluctuation terminologyWithdrawn
BS 4727-2:Group 06:1985Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Switchgear and controlgear terminology (including fuse terminology)Withdrawn
BS 4727-2:Group 07:1973Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Tariffs terminologyWithdrawn
BS 4727-2:Group 08:1994Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Electric cablesWithdrawn
BS 4727-2:Group 09:1981Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Transductor terminologyCurrent
BS 4727-2:Group 10:1985Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Industrial electroheating terminologyCurrent
BS 4727-2:Group 11:1986Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Generation, transmission and distribution of electricity terminologyWithdrawn
BS 4727-2:Group 13:1991Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Electrical apparatus for explosive atmospheresCurrent, Work in Hand
BS 4727-2:Group 15:1991Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Overhead linesCurrent
BS 4727-2:Group 16:1991Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Instrument transformersCurrent
BS 4727-2:Group 17:1992Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Secondary cells and batteriesCurrent
BS 4727-2:Group 18:1992Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Electric tractionWithdrawn
BS 4727-2:Group 19:1997Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Power system protectionWithdrawn
BS 4778-3.1:1991Quality vocabulary. Availability, reliability and maintainability terms - Guide to concepts and related definitionsCurrent
BS 4778-3.2:1991Quality vocabulary. Availability, reliability and maintainability terms - Glossary of international terms - 3.2 glossay of international termsCurrent, Work in Hand
BS 5406-1:1988Disturbances in supply systems caused by household appliances and similar electrical equipment - Glossary of termsWithdrawn
BS 5664-1:1978Solventless polymerisable resinous compounds used for electrical insulation - Definitions and general requirementsWithdrawn
BS 6458-1:1990Fire hazard testing for electrotechnical products - Glossary of termsWithdrawn
BS EN 13237:2003Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheresWithdrawn
BS EN 13237:2012Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheresCurrent
BS EN 60034-16-1:1996Rotating electrical machines. Excitation systems for synchronous machines - DefinitionsWithdrawn
BS EN 60034-16-1:2011Rotating electrical machines - Excitation systems for synchronous machines. DefinitionsCurrent
BS EN 60071-1:1996Insulation co-ordination - Definitions, principles and rulesWithdrawn
BS EN 60276:1996Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-ringsCurrent
BS EN 60401-1:2005Terms and nomenclature for cores made of magnetically soft ferrites - Terms used for physical irregularitiesCurrent
BS EN 60464-1:1999Varnishes used for electrical insulation - Definitions and general requirementsCurrent
BS EN 60626-1:1996Combined flexible materials for electrical insulation - Definitions and general requirementsCurrent
BS EN 60626-1:2012Combined flexible materials for electrical insulation - Definitions and general requirementsCurrent
BS EN 60633:1999+A1:2009Terminology for high-voltage direct current (HVDC) transmissionCurrent, Work in Hand
BS EN 60641-1:1996Specification for pressboard and presspaper for electrical purposes - Definitions and general requirementsWithdrawn
BS EN 60684-1:1996Specification for flexible insulating sleeving - Specification for general requirementsWithdrawn
BS EN 60763-1:1996Specification for laminated pressboard - Definitions, classification and general requirementsWithdrawn
BS EN 60763-1:2011Laminated pressboard for electrical purposes - Definitions, classification and general requirementsCurrent
BS EN 60819-1:1996Non-cellulosic papers for electrical purposes - Definitions and general requirementsCurrent
BS EN 60819-1:2012Non-cellulosic papers for electrical purposes - Definitions and general requirementsCurrent
BS EN 61061-1:1998Non-impregnated densified laminated wood for electrical purposes - Definitions, designations and general requirementsWithdrawn
BS EN 61061-1:2006Non-impregnated densified laminated wood for electrical purposes - Definitions, designation and general requirementsCurrent
BS EN 61067-1:1997Glass and glass polyester fibre woven tapes - Definitions, classification and general requirementsCurrent
BS EN 61068-1:1997Polyester fibre woven tapes - Definitions, designation and general requirementsCurrent
BS EN 61360-4:1997Standard data element types with associated classification scheme for electric components - Data element type definitionsWithdrawn
BS EN 61508-4:2002Functional safety of electrical/ electronic/ programmable electronic safety-related systems - Definitions and abbreviationsWithdrawn
BS EN 61508-4:2010Functional safety of electrical/electronic/ programmable electronic safety related systems - Definitions and abbreviationsCurrent
BS EN 62223:2009Insulators. Glossary of terms and definitionsCurrent
BS EN 62333-1:2006Noise suppression sheet for digital devices and equipment - Definitions and general propertiesCurrent
BS EN 80000-6:2008Quantities and units - ElectromagnetismCurrent
BS IEC 50(481):1996International electrotechnical vocabulary - Primary cells and batteriesWithdrawn
BS IEC 60050(411):1996International electrotechnical vocabulary - Rotating machinesCurrent, Work in Hand
BS IEC 60050-101:1998International electrotechnical vocabulary - MathematicsCurrent
BS IEC 60050-113:2011International electrotechnical vocabulary - Physics for electrotechnologyCurrent
BS IEC 60050-195:1998International electrotechnical vocabulary - Earthing and protection against electric shockCurrent
BS IEC 60050-351:1998International electrotechnical vocabulary - Automatic controlWithdrawn
BS IEC 60050-442:1998International electrotechnical vocabulary - Electrical accessoriesCurrent
BS IEC 60050-551:1998International electrotechnical vocabulary - Power electonicsCurrent
BS IEC 60050-651:1999International electrotechnical vocabulary - Live workingCurrent, Work in Hand
BS IEC 60050-821:1998International electrotechnical vocabulary - Signalling and security apparatus for railwaysCurrent
DD IEC/TS 62504:2011General lighting. LEDs and LED modules. Terms and definitionsCurrent, Work in Hand
PD IEC TR 62051:1999Electricity metering. Glossary of termsCurrent
PD IEC/PAS 60099-7:2004Surge arresters - Glossary of terms and definitions from IEC publications 60099-1, 60099-4, 60099-6, 61643-1, 61643-12, 61643-21, 61643-311, 61643-321, 61643-331 and 61643-341Current

[ back to top ]

Committees (35)

Sort by: Reference | Name

Committee ReferenceTitle
EPL/46Cables, wires and waveguides, radio frequency connectors and accessories for communication and signalling
GEL/15/9Cellulosic materials
DS/1Dependability
GEL/3Documentation and graphical symbols
CPL/34/1Electric lamps
JPEL/64Electrical installations of buildings - Joint committee
GEL/28Electrical Insulation Co-ordination
PEL/13Electricity Meters
PEL/27Electroheating
GEL/1Electrotechnical Terminology
GEL/210/12EMC basic, generic and low frequency phenomena Standardization
B/540Energy performance of materials components and buildings
EXL/31Equipment for explosive atmospheres
GEL/112Evaluation and qualification of electrical insulating materials and systems
EXL/23Explosion and fire precautions in industrial and chemical plant
GEL/89Fire hazard testing
SS/7General metrology, quantities, units and symbols
EPL/94General purpose relays and reed contact units
PEL/36Insulators for power systems
CPL/34Lamps and Related Equipment
GEL/65Measurement and control
PEL/95Measuring relays and protection systems
GME/21Mechanical vibration, shock and condition monitoring
EPL/49Piezoelectric devices for frequency control and selection
PEL/22Power electronics
PEL/57Power systems management and associated information exchange
GEL/15/7Resins and varnishes
GEL/15/6Rigid fibrous reinforced laminates for electrical purposes
PEL/2Rotating electrical machinery
GEL/15Solid electrical insulating materials
PEL/37Surge Arresters - High Voltage
PEL/37/1Surge Arresters - Low Voltage
GEL/65/1System considerations
GEL/8Systems Aspects for Electrical Energy Supply
EPL/51Transformers, inductors, magnetic components and ferrite materials

[ back to top ]

Recently Viewed
Need Help?

We are here to help you with any queries. Email us for help.

But first, why not view the Help Pages?