Skip to content
RSS feed for this category

Electrical engineering

Standards in development (439)

Sort by: Title | Status

Standard TitleStatus
BS 55016-1-4 am3 f1 Ed. 3.0 disturbance and immunity measuring apparatus and methods – Part 1-4: Radio disturbance and immunity measuring apparatus – Antennas and test sites for radiated disturbance - measurementsPublic Comment
BS 7671 18th edition Electrical Installations of Buildingsnull
BS 7671 A3:2015/Cor1 Requirements for Electrical installationsnull
BS CISPR 16-1-4:2010 Amd 2 for radio disturbance and immunity measuring apparatus and methods Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurementsPublic Comment
BS CISPR 16-1-5:2015 Amd 1 disturbance and immunity measuring apparatusandmethods – Part 1-5: Radio disturbance and immunity measuring apparatus – Antenna calibration sites and reference test sites for 5 MHz to 18 GHzPublic Comment
BS CISPR 16-1-6:2015 Amd 1 for radio disturbance and immunity measuring apparatus and methods Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibrationPublic Comment
BS EN /TC 16783 category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations - Complementary elementPublic Comment
BS EN 13163:2012+A1:2015/A2 Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - SpecificationApproval
BS EN 13165:2012+A1:2015/A2 Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - SpecificationPublication
BS EN 13166:2012+A1:2015/A2 Thermal insulation products for buildings - Factory made phenolic foam (PF) products - SpecificationPublication
BS EN 13306 Maintenance – Maintenance TerminologyPublic Comment
BS EN 14313 Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - SpecificationPublication
BS EN 14986 Design of fans working in potentially explosive atmospheresTechnical Review
BS EN 15026 Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulationIdea
BS EN 15548 Thermal insulation products for building equipment and industrial installations - Determination of thermal resistance by means of the guarded hot plate method - Measurements at elevated temperatures from 100 °C to 850 °CIdea
BS EN 16382 Thermal insulation products for building applications - Determination of the pull-through resistance of plate anchors through thermal insulation productsApproval
BS EN 16383 Thermal insulating products for building applications - Determination of the hygrothermal behavior of external thermal insulation composite systems with renders (ETICS)Approval
Opens a new windowBS EN 16991 Risk based inspection framework (RBIF)Public Comment
BS EN 17007 Maintenance process and associated indicatorsPublic Comment
BS EN 1839 Determination of explosion limits of gases and vapours and determination of the limiting oxygen concentration (LOC) for flammable gases and vapoursTechnical Review
BS EN 50117-10-1 Coaxial cables Part 10-1: Sectional specification for coaxial cables for analogue and digital signal transmission - Outdoor drop cables for systems operating at 5 MHz - 1 000 MHzPublic Comment
BS EN 50117-10-2 Coaxial cables Part 10-2: Sectional specification for coaxial cables for analogue and digital signal transmission - Outdoor drop cables for systems operating at 5 MHz - 3 000 MHzPublic Comment
BS EN 50117-11-1 Coaxial cables Part 11-1: Sectional specification for coaxial cables for analogue and digital signal transmission - distribution and trunk cables for systems operating at 5 MHz - 1 000 MHzPublic Comment
BS EN 50117-11-2 Coaxial cables Part 11-2: Sectional specification for coaxial cables for analogue and digital signal transmission - distribution and trunk cables for systems operating at 5 MHz - 2 000 MHzPublic Comment
BS EN 50117-9-1 Coaxial cables Part 9-1: Sectional specification for coaxial cables for analogue and digital signal transmission - Indoor drop cables for systems operating at 5 MHz - 1 000 MHzPublic Comment
BS EN 50117-9-2 Coaxial cables Part 9-2: Sectional specification for coaxial cables for analogue and digital signal transmission - Indoor drop cables for systems operating at 5 MHz - 3 000 MHzPublic Comment
BS EN 50117-9-3 Coaxial cables Part 9-3: Sectional specification for coaxial cables for analogue and digital signal transmission - Indoor drop cables for systems operating at 5 MHz - 6 000 MHzPublic Comment
BS EN 50288-12-1 Multi-element metallic cables used in analogue and digital communications and control - Part 12-1: Sectional specification for screened cables characterised from 1 MHz up to 2 000 MHz – Horizontal and building backbone cables.Accepted
BS EN 50289-1-1 Communication cables - Specifications for test methods Part 1-1: Electrical test methods - General requirementsAccepted
Opens a new windowBS EN 50289-1-11 Communication cables - Specifications for test methods Part 1-11: Electrical test methods - Characteristic impedance, input impedance, return lossPublic Comment
BS EN 50289-1-8 Communication cables - Specifications for test methods - Part 1-8: Electrical test methods - AttenuationAccepted
BS EN 50289-1-9 Communication cables - Specifications for test methods Part 1-9: Electrical test methods - Unbalance attenuation (transverse conversion loss TCL transverse conversion transfer loss TCTL)Accepted
BS EN 50289-4-16 Communication cables - Specifications for test methods - Part 4-16: Environmental test methods - Circuit integrity under fire conditionsPublic Comment
BS EN 50290-2-20 Communication cables - Part 2-20: Common design rules and construction - GeneralPublic Comment
BS EN 50290-2-29 Communication cables - Part 2-29: Common design rules and construction - Crosslinked polyethylene insulation compounds: instrumentation, control and field bus cablesPublic Comment
BS EN 50290-2-34 Communication cables - Part 2-34: Common design rules and construction - PE Sheathing compound for outdoor optical fibre cablesPublic Comment
BS EN 50290-2-35 Communication cables - Part 2-35: Common design rules and construction - Polyamide sheathing compoundPublic Comment
BS EN 50290-2-36 Communication cables - Part 2-36: Common design rules and construction - Silicon compounds for Fire Resistant CablesPublic Comment
BS EN 50407-2 Multi-pair cables used in high bit rate digital access telecommunications networks - Part 2: Multi-pair cables with bandwidth up to 30 MHz - Indoor and Outdoor riser cables.Idea
BS EN 50561-2 Power line communication apparatus used in low voltage installations - Radio disturbance characteristics - Limits and methods of measurement - Part 2: Apparatus for access-network useApproval
BS EN 50628 50628 Erection of electrical installations in underground minesApproval
BS EN 50882-11 Multi-element metalic cables used in analogue and digital communication and control Part 11: Sectional specification for un-screened cables, characterised up to 500 MHz, for horizontal and building backbone wiringPublic Comment
BS EN 55011 Am1 f1 Ed.6.0 Industrial, scientific and medical equipment - Radio-frequencydisturbance characteristics - Limits and methods of measurementApproval
BS EN 55012 Ed. 7.0 Vehicles, boats and internal combustion engines - Radio disturbancecharacteristics - Limits and methods of measurement for the protectionof off-board receiversAccepted
BS EN 55014-1 Ed 6 - Requirements for household appliances, electric tools and similar apparatus - Part 1: EmissionApproval
BS EN 55015 Ed 9.0 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipmentPublic Comment
BS EN 55016-1-1 Requirements for calibration of measuring equipmentApproval
BS EN 55016-1-2/Am 1 Ed. 2.0 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurementsPublic Comment
BS EN 55016-1-4 AMD 3 f2 Ed.3 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurementsPublic Comment
BS EN 55016-1-6:2015/A2 and immunity measuring aparatus andmethods - Part 1-6: Radio disturbance and immunity measuring aparatus - EMC antenna calibrationPublic Comment
BS EN 55016-2-1/Am 1 Ed. 3.0 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurementsPublic Comment
BS EN 55016-2-3 Am3 Ed 3.0 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiateddisturbance measurementsApproval
BS EN 55016-4-2 /Am 2 Ed. 2.0 Specification for radio disturbance and immunity measuring apparatusandmethods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertaintyPublic Comment
BS EN 55016-4-2 Ed 2.0/A2 f4 Specification for radio disturbance and immunity measuring apparatus and methods – Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertaintyPublic Comment
BS EN 55016-4-2 Ed 2.0/A2 f5 Specification for radio disturbance and immunity measuring apparatus and methods – Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertaintyPublic Comment
BS EN 55016-4-2 Ed2.0/A2/F3 Specification for radio disturbance and immunity measuring apparatusandmethods – Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertaintyPublic Comment
BS EN 55016-4-2/Ed2/A2/F2 Specification for radio disturbance and immunity measuring apparatusandmethods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertaintyAccepted
BS EN 55020:2007+A1 Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurementPublication
BS EN 55025 ED.4.0 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers. Annex on ALSE Performance Verification 150 kHz - 1 GHzPublic Comment
BS EN 55035 CISPR 35: Electromagnetic compatibility of multimedia equipment - Immunity RequirementsApproval
BS EN 55036 Ed1.0 Radio disturbance characteristics -Limits and methods of measurement for the protection of off-board receivers below 30 MHzAccepted
BS EN 60027-2 Ed 4.0 Letter symbols to be used in electrical technology Part 2: Telecommunications and electronicsPublic Comment
BS EN 60027-3 Ed 4.0 Letter symbols to be used in electrical technology Part 3: Logarithmic and related quantities; and their unitsAccepted
BS EN 60034-1 Ed 13.0 Rotating electrical machines Part 1: Rating and performancePublic Comment
BS EN 60034-12 Ed 3.0 Rotating electrical machines Part 12: Starting performance of single-speed three-phase cage induction motorsPublic Comment
BS EN 60034-18-41 Ed 1.0 /A1 Amendment 1 - Rotating electrical machines Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality control testsAccepted
BS EN 60034-18-42 Rotating electrical machines Part 18-42: Qualification and acceptance tests for partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage convertersPublic Comment
BS EN 60034-2-1:2007+A11:2015 Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)Publication
BS EN 60034-23 ED 1.0 Rotating electrical machines Part 23: Specification for the refurbishment of rotating electrical machinesPublic Comment
BS EN 60034-27-1 Rotating electrical machines Part 27-1: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machinesAccepted
BS EN 60034-27-3 Ed. 1.0 Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machinesPublication
BS EN 60034-27-4 Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index on winding insulation of rotating electrical machinesAccepted
BS EN 60034-3 Ed 7.0 Rotating electrical machines Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensatorsAccepted
BS EN 60034-30:2009/A11:2015 Rotating electrical machines - Part 30: Efficiency classes of single-speed,three-phase, cage-induction motors (IE-code)Publication
BS EN 60034-4 Ed 4.0 Rotating electrical machines Part 4: Methods for determining synchronous machine quantities from testsPublic Comment
BS EN 60071-2 Insulation co-ordination Part 2 Application Guide (Proposed horizontal standard)Accepted
BS EN 60071-2 ED 3.0/A1 AMD 1 Insulation co-ordination - Part 2: Application guidePublic Comment
BS EN 60079-0 Ed 7.0 Explosive atmospheres Part 0: Equipment - General requirementsAccepted
BS EN 60079-13 Ed 2.0 Explosive atmospheres Part 13: Equipment protection by pressurized room p and artificially ventilated room vPublic Comment
BS EN 60079-15 Ed 5.0 Explosive atmospheres Part 15: Equipment protection by type of protection n NULLAccepted
BS EN 60079-19 Ed 4.0 Explosive atmospheres Part 19: Equipment repair; overhaul and reclamation (REVISED)Accepted
BS EN 60079-2:2014/COR1:2015 Explosive Atmospheres Part 2 - Equipment protection by pressurized enclosure "p"null
BS EN 60079-29-1 Ed 2.0 Explosive atmospheres Part 29-1: Gas detectors - Performance requirements of detectors for flammable gasesApproval
BS EN 60079-30-1 Explosive atmospheres Part 30-1: Electrical resistance trace heating- General; type testing and design requirementsPublication
BS EN 60079-30-2 Explosive atmospheres Part 30-2: Electrical resistance trace heating- Application guide for design; installation and maintenancePublication
BS EN 60079-31 Ed 3.0 Explosive atmospheres Part 31: Equipment dust ignition protection by enclosure tAccepted
BS EN 60081:1998+A6 Ed.5.0 Double-capped fluorescent lamps - Performance specificationsApproval
BS EN 60099-5 Surge arresters Part 5: Selection and application recommendationsPublic Comment
BS EN 60112 Method for the determination of the proof and the comparative tracking indices of solid insulating materialsAccepted
BS EN 60122-1+A1 Amendment1 : Quartz crystal units of assessed quality Part 1: Generic specificationAccepted
BS EN 60137 Ed. 7.0 Insulated bushings for alternating voltages above 1000 VPublic Comment
BS EN 60153-1 HOLLOW METALLIC WAVEGUIDES Part 1: General requirements and measuring methodsPublication
BS EN 60153-2 Ed 3.0 HOLLOW METALLIC WAVEGUIDES Part 2: Relevant specifications for ordinary rectangular waveguidesPublication
BS EN 60154-1 Ed 3.0 FLANGES FOR WAVEGUIDES Part 1: General requirementsPublication
BS EN 60154-2 Ed 3.0 FLANGES FOR WAVEGUIDES Part 2: Relevant specifications for flanges for ordinary rectangular waveguidesPublication
BS EN 60154-4 Flanges for waveguides Part 4: Relevant specifications for flanges for circular waveguidesAccepted
BS EN 60205 Calculation of the effective parameters of magnetic piece partsPublic Comment
BS EN 60255-118-1 Measuring relays and protection equipment - Part 195: Functional requirements for synchrophasor measurementsAccepted
BS EN 60255-187-1 Measuring relays and protection equipment Part 187-1: Functional requirements for restrained and unrestrained differential protection of motors, generators and transformersAccepted
BS EN 60255-24 Measuring relays and protection equipment - Part 24 : Common format for transient data exchange (COMTRADE) for powersystemsPublication
BS EN 60276 Ed. 2.0 IEC 60276 Ed. 2.0 Definitions and nomenclature for carbon brushes,brush-holders, commutators and slip-ringsPublic Comment
BS EN 60300-3-10 Ed 2.0 Dependability management Part 3-10: Application guide - Maintainability and supportabilityAccepted
BS EN 60300-3-3 Dependability management Part 3-3: Application guide - Life cycle costingPublic Comment
BS EN 60305 Insulators for overhead lines with a nominal voltage above 1000 V ceramic or glass insulator units for a a.c. systems - Characteristics of insulator units of the cap and pin typeAccepted
BS EN 60357:2003prAA:2016 (non-vehicle) - Performance specificationsPublic Comment
BS EN 60364-5-56 Ed 3.0 Low-voltage electrical installations Part 5-56: Selection and erection of electrical equipment - Safety servicesAccepted
BS EN 60364-5-57 Low-voltage electrical installations Part 5: Selection and erection of electrical equipment - Clause 57: Stationary secondary batteriesAccepted
BS EN 60364-7-708 Ed 3.0 Low-voltage electrical installations Part 7-708: Requirements for special installations or locations - Caravan parks; camping parks and similar locationsPublic Comment
BS EN 60364-7-721 Ed 2.0 Low-voltage electrical installations Part 7-721: Requirements for special installations or locations - Electrical installations in caravans and motor caravansPublic Comment
BS EN 60370 Ed 2.0 Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdown methodsPublic Comment
BS EN 60433 Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic insulators for a.c. systems - Characteristics of insulator units of the long rod typeAccepted
BS EN 60444-8 ED 2.0 Measurement of quartz crystal unit parameters Part 8: Test fixture for surface mounted quartz crystal unitsPublication
BS EN 60445 Basic and safety principles for man-machine interface, marking andidentification - Identification of equipment terminals, conductor terminations and conductorsAccepted
BS EN 60519-12 Safety in installations for electroheating and electromagnetic processing Part 12: Particular requirements for infrared electroheatingPublic Comment
BS EN 60534-3-1 Ed 2.0 Industrial-process control valves Part 3-1: Dimensions - Face-to-face dimensions for flanged; two-way; globe type; straight pattern and centre-toface dimensions for flanged; two-way; globe-type; angle pattern control valvesAccepted
BS EN 60556 Ed. 2.0/Amd1 Gyromagnetic materials intended for application at microwave frequencies- Measuring methods for propertiesPublication
BS EN 60674-2 Ed 2.0 IEC 60674-2/Ed2: Specification for plastic films for electrical purposes. Part 2: Methods of testApproval
BS EN 60674-3-8 Ed 1.0 /A1 Amendment 1: Plastic films for electrical purposes -Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulationApproval
BS EN 60679-1 Piezoelectric and associated material oscillators of assessed quality Part 1 : Generic specificationPublic Comment
BS EN 60679-1+A1 Quartz crystal controlled oscillators of assessed quality Part 1: Generic specification Amendment 1Accepted
BS EN 60695-1-10 Ed 2.0 Fire hazard testing Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelinesPublic Comment
BS EN 60695-1-12 Fire hazard testing Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineeringPublication
BS EN 60695-1-21 Fire hazard testing Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methodsApproval
BS EN 60695-1-30 Ed 3.0 Fire hazard testing Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelinesPublic Comment
BS EN 60695-10-3 Ed 2.0 Fire hazard testing Part 10-3: Abnormal heat - Mould stress relief distortion testApproval
BS EN 60695-11-2 Ed 3.0 Fire hazard testing Part 11-2: Test flames - 1 kW pre-mixed flame - Apparatus; confirmatory test arrangement and guidanceAccepted
BS EN 60695-11-5 Ed 2.0 Fire hazard testing Part 11-5: Test flames - Needle-flame test method - Apparatus; confirmatory test arrangement and guidancePublic Comment
BS EN 60695-6-2 Ed 2.0 Fire hazard testing Part 6-2: Smoke obscuration - Summary and relevance of test methodsAccepted
BS EN 60695-8-1 Ed 3.0 Fire hazard testing Part 8-1: Heat release - General guidancePublic Comment
BS EN 60695-8-2 Ed1.0 IEC 60695-8-2 Ed 1.0: Fire hazard testing Part 8-2: Heat release – Summary and relevance of test methodsPublication
BS EN 60700-2 Thyristor valves for high-voltage direct current (HVDC) power transmission - Part 2: TerminologyPublic Comment
BS EN 60758 Synthetic quart crystal - Specifications and guidelines for the usePublication
BS EN 60809 Ed 2.0 /A6 Amendment 6 - Lamps for road vehicles - Dimensional; electrical and luminous requirementsAccepted
BS EN 60810+A1 Lamps for road vehicles - Performance requirementsPublic Comment
BS EN 60812 Ed 3.0 Failure Mode and Effects analysis (FMEA)Accepted
BS EN 60893-3-6 Ed 2.0 /A2 Amendment 2: Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resinsAccepted
BS EN 60901: 1996+A6 Single-capped fluorescent lamps - Performance specificationsPublication
BS EN 60966-1 Ed.3 Cables, wires, waveguides, r.f. connectors, and accessories for communication and signallingPublic Comment
BS EN 60966-2-4 Ed 4 Detail specification for cable assebmblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz, IEC 61196-2 connectorsPublication
BS EN 60966-2-5 Ed 4 Detail specification for cable assebmblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz, IEC 61196-2 connectorsApproval
BS EN 60966-2-6 Ed 4 Detail specification for cable assebmblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz, IEC 61196-24 connectorsApproval
BS EN 60968:2014+A1 Self-ballasted fluorescent lamps for general lighting services - safety requirementsApproval
BS EN 60969 ED 2.0 Self-ballasted lamps for general lighting services - Performance require mentsApproval
BS EN 60969:2013/prAA:2014 Self-ballasted compact fluorescent lamps for general lighting services - Performance requirementsIdea
BS EN 61000-2-2 Ed 2.0 /A1 Electromagnetic compatibility (EMC) Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systemsPublic Comment
BS EN 61000-3-2 Ed 5.0 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ? 16 A per phase)Public Comment
BS EN 61000-3-3 Ed 3.0 /A1 Amendment 1 - Electromagnetic compatibility (EMC) Part 3-3: Limits - Limitation of voltage changes; voltage fluctuations and flicker in public low-voltage supply systems; for equipment with rated current ? 16 A per phase and not subject to conditional connectionPublic Comment
BS EN 61000-4-10 Electromagnetic Compatibility (EMC) – Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity testPublic Comment
BS EN 61000-4-11 AMD1 Ed.2.0 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity testsPublic Comment
BS EN 61000-4-23 Ed 2.0 Electromagnetic Compatibility (EMC) - Part 4-23: Testing and measurement techniques - Test methods for protective devices for HEMP and other radiated disturbancesPublic Comment
BS EN 61000-4-39 Ed. 1.0 Electromagnetic compatibilty (EMC) – Part 4-39: Testing and measurement techniques – Radiated fields in close proximity immunity testPublic Comment
BS EN 61000-4-9 Electromagnetic Compatibility (EMC) – Part 4-9: Testing and measurement techniques – Impulse magnetic field immunity testPublic Comment
BS EN 61000-6-3 ED 2.0/A2 Ed 2 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environmentsPublic Comment
BS EN 61000-6-4 ED 2.0/A2 Ed 2 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environmentsPublic Comment
BS EN 61010-2-201 Ed. 2.0 IEC 61010-2-201 Ed. 2.0 Safety requirements for electrical equipment formeasurement, control, and laboratory use - Part 2-201: Particular requirements for control equipmentPublic Comment
BS EN 61010-2-202 Ed. 1.0 IEC 61010-2-202 Ed. 1.0 Safety requirements for electrical equipment for measurement, controland laboratory use - Part 2-2 xx: Particular requirements for electrically operated valve and actuatorApproval
BS EN 61014 Programmes for reliability growthAccepted
BS EN 61069-1 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment -Part 1:Terminology and basic conceptsApproval
BS EN 61069-2 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 2: Assessment methodologyApproval
BS EN 61069-3 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 3: Assessment of system functionalityApproval
BS EN 61069-4 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 4: Assessment od system performanceApproval
BS EN 61069-5 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 5: Assessment of system dependabilityApproval
BS EN 61069-6 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 6: Assessment of system operabilityApproval
BS EN 61069-7 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 7: Assessment of system safety hazardApproval
BS EN 61069-8 Ed 2.0 Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment Part 8: Assessment of other system propertiesApproval
BS EN 61078 Reliability block diagramsApproval
BS EN 61156-1-4 MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS Part 1-4: Assessment of the conductor heating in bundled cables due to the deployment of power transmission based on IEEE802.3 PoE-regimeAccepted
BS EN 61163-2 Reliability stress screening Part 2: ComponentsAccepted
BS EN 61167 Metal halide lamps - Performance specificationPublication
BS EN 61167 Metal halide lamps - Performance specificationApproval
BS EN 61169-11 Radio-frequency connectors Part 11: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9.5 mm with threaded coupling - characteristic impedance 50 ohm (Type 4.1-9.5)Publication
BS EN 61169-54 RADIO-FREQUENCY CONNECTORS Part 54: Sectional Specification for Coaxial Connectors with 10mm inner of outer Conductor,nominal Characteristic Impedance 50 Ohms, Series 4.3- 10Approval
BS EN 61169-58 Radio-frequency connectors Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - characteristic impedance 50 ohm (type SBMA)Approval
BS EN 61169-59 Radio-frequency connectors Part 59: Sectional specification for type L32-4 and L32-5 threaded multi-coaxial radio-frequency connectorsIdea
BS EN 61196-1-110 Ed. 1.0 Coaxial communication cables Part 1-110: Electrical test methods - Test for continuityApproval
BS EN 61196-1-113 Coaxial communication cables Part 1-113: Electrical test methods - Test for attenuation constantAccepted
BS EN 61196-11 Ed1.0 Coaxial communication cables Part 11: Sectional specification for semi-rigid cables with polyethylene (PE) dielectricApproval
BS EN 61196-11-1 Ed.1 Coaxial communication cables Part 11-1: Blank detail specification for semi-rigid cables with polyethylene (PE) dielectricApproval
BS EN 61196-6-2 Coaxial communication cables Part 6-2: Detail specification for 75-4 type CATV drop cablesAccepted
BS EN 61196-6-3 Coaxial communication cables Part 6-3: Detail specification for 75-5 type CATV drop cablesAccepted
BS EN 61196-6-4 Coaxial communication cables Part 6-4: Detail specification for 75-7 type CATV drop cablesAccepted
BS EN 61204-3 Low voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC)Public Comment
BS EN 61204-7 Low-voltage switch mode power supplies - Part 7: Safety requirementsTechnical Review
BS EN 61240 Piezoelectric devices - Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection - General rulesPublication
BS EN 61326-3-1 Ed. 2 Electrical equipment for measurement, control and laboratory use - EMCrequirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applicationsPublic Comment
BS EN 61326-3-2 Ed. 2 Electrical equipment for measurement, control and laboratory use - EMCrequirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environmentPublic Comment
BS EN 61332 Soft ferrite material classificationPublic Comment
BS EN 61360-1 Standard data elements types with associated classification scheme forelectric items - Part 1: Definitions - Principles and methodsPublic Comment
BS EN 61360-6 QIEC Common Data Dictionary (IEC CDD) Quality guideApproval
BS EN 61466-1 Composite string insulator units for overhead lines with a nominalvoltage greater that 1000 V - Part 1: Standard strength and end fittingsPublication
BS EN 61466-2+A2 Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V Part 2: Dimensional and electrical characteristicsAccepted
BS EN 61511-1 ED.2.0 Functional Safety - Safety instrumented systems for the process industrysector - Normative Part 1: Framework, definitions, system, hardware and software requirementsPublication
BS EN 61511-2 ED.2.0 Functional Safety - Safety instrumented systems for the process industrysector - Normative Part 2: Guidelines for the application of IEC 61511-1 - InformativePublication
BS EN 61511-3 ED.2.0 Functional Safety - Safety instrumented systems for the process industrysector - Normative Part 3: Guidance for the determination of the required safety integrity levels - InformativePublication
BS EN 61605 Fixed inductors for use in electronic and telecommunication equipment - Marking codesPublic Comment
BS EN 61643-11:2012/A Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methodsPublic Comment
BS EN 61643-31 Low-voltage surge protective devices Part 31: Requirements and test methods for SPDs for photovoltaic installationsPublic Comment
BS EN 61643-32 Low-voltage surge protective devices - Surge protective devices for specific use including d.c. Part 32: Selection and application principles - SPDs connected to photovoltaic installationsPublic Comment
BS EN 61643-331 Components for low-voltage surge protective devices - Part 331: Performance requirements and test methods for metal oxide varistors (MOV)Accepted
BS EN 61643-341 Ed 2.0 Components for low-voltage surge protection -Part 341: Performance requirements and test circuits for thyristor surge suppressors (TSS) NULLAccepted
BS EN 61643-351 Components for low-voltage surge protective devices Part 351: Performance requirements and test circuits for lightning isolation transformers (LIT)Public Comment
BS EN 61643-352 Low-voltage surge protective component Part 352: Lightning isolation transformers connected to telecommunications and signalling networks-Selection and application principlesPublic Comment
BS EN 61703 Mathematical expressions for reliability, availability, maintainability and maintenance support termsApproval
BS EN 61709 Reference conditions for failure rates and stress models for conversionPublic Comment
BS EN 61800-3:2004+A1:2012+A2 Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methodsPublic Comment
BS EN 61800-5-1:2007/A1 Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energyApproval
BS EN 61800-5-2 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - FunctionalPublication
BS EN 61800-9-1 IEC 61800-9-1 Ed.1: Adjustable speed electrical power drive systems - Part 9-1: Eergy efficiency of power drive systems, motor starters, power electronics and their driven applications – General requirements for setting energy efficiency standards for power driven equipment using the Extended Product Approach (EPA) and semi analytic model (SAM)Public Comment
BS EN 61800-9-2 Adjustable speed electrical power drive systems - Part 9-2: Part 9-2: Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Energy efficiency indicators for power drive systems and motor startersPublic Comment
BS EN 61803:1999+A1:2010+ A2 Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated convertersPublication
BS EN 61810-10 Electromechanical elementary relays Part 10: High capacity relays - Additional functional aspects and safety requirementsAccepted
BS EN 61810-2 Electromechanical elementary relays Part 2: ReliabilityPublic Comment
BS EN 61810-2-1 Ed 2.0 Electromechanical elementary relays Part 2-1: Reliability - Procedure for the verification of B<sub>10</sub> valuesPublic Comment
BS EN 61850-7-2+A1 Communication networks and systems for power utility automation Part 7-2: Basic information and communication structure - Abstract communication service interface (ACSI)Public Comment
BS EN 61850-7-3+A1 Communication networks and systems for power utility automation Part 7-3: Basic communication structure - Common data classesPublic Comment
BS EN 61850-7-4 Ed 2.0 /A1 Amendment 1 to IEC 61850-7-4 Ed.2: Communication networks and systems for power utility automation Part 7-4: Basic communication structure - Compatible logical node classes and data object classes NULLPublic Comment
BS EN 61850-7-420 Ed 2.0 Communication networks and systems for power utility automation Part 7-420: Basic communication structure - Distributed energy resources logical nodesAccepted
BS EN 61850-8-2 Communication networks and systems for power utility automation Part 8-2: Specific communication service mapping (SCSM) - Mapping to Extensible Messaging Presence Protocol (XMPP)Public Comment
BS EN 61850-9-2+A1 Communication networks and systems for power utility automation Part 9-2: Specific communication service mapping (SCSM) - Sampled values over ISO/IEC 8802-3Public Comment
BS EN 61850-90-10 Communication networks and systems for power utility automation Part 90-10: IEC 61850 objects for schedulingAccepted
BS EN 61857-31 systems-procedures for thermal evaluation Part 31: Applications with a designed life less than 5000 hoursPublic Comment
BS EN 61857-32 Electrical insulation systems - Procedures for thermal evaluation Part 32: Multifactor evaluation with increased factors during diagnostic testingAccepted
BS EN 61857-33 Electrical insulation systems - Procedures for thermal evaluation Part 33: Multifactor evaluation with increased factors at elevated temperatureAccepted
BS EN 61935-1 SPECIFICATION FOR THE TESTING OF BALANCED AND COAXIAL INFORMATION TECHNOLOGY CABLING Part 1: Installed balanced cabling as specified in ISO/IEC 11801-1 and related standards.Accepted
BS EN 61935-1-1 TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH ISO/IEC 11801 Part 1-1: Installed Cabling - Additional requirements for measurement of transverse conversion loss with field test instrumentation.Accepted
BS EN 61935-1-2 TESTING OF BALANCED COMMUNICATION CABLING IN A ACCORDANCE WITH ISO/IEC 11801 Part 1-2: Additional requirements for measurement of resistance unbalance with field test instrumentation.Accepted
BS EN 61935-2-21 Ed1.0 Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-21: Cord and work area cord category 6- Blank detail specificationPublic Comment
BS EN 61935-2-22 Ed.1 Generic cabling systems — Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 2-22: Cord and work area cord category 6A- Blank detail specificationPublic Comment
BS EN 61952-1 Insulators for overhead lines - Composite line post insulators for A.C systems with a nominal voltage greater than 1000 V - Part 1: Definitions, End fittings and DesignationsAccepted
BS EN 61954:2011+A2 Static VAR compensators (SVC) - Testing of thyristor valvesPublic Comment
BS EN 61968-13 Ed 2.0 Application integration at electric utilities - System interfaces for distribution management Part 13: Common distribution power system model profilesAccepted
BS EN 61968-3 Ed 2.0 Application integration at electric utilities - System interfaces for distribution management Part 3: Interface for network operations NULLPublic Comment
BS EN 61970-301 Ed 6.0 Energy management system application program interface (EMS-API) Part 301: Common Information Model (CIM) BasePublic Comment
BS EN 61970-302 Energy Management System Application Program Interface (EMS-API) Part 302: CIM for DynamicsPublic Comment
BS EN 61970-502-8 Energy Management System Application Program Interface(EMS-API) Part 502-8: Web Services Profile for 61970-4 Abstract ServicesAccepted
BS EN 61970-552 Ed 2.0 Energy management system application program interface (EMS-API) Part 552: CIMXML Model exchange formatPublic Comment
BS EN 61975:2010+A1 High-voltage direct current (HVDC) installations - System testsPublic Comment
BS EN 62031 Ed 2.0 LED modules for general lighting - Safety specificationsAccepted
BS EN 62040-1 Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPSPublic Comment
BS EN 62040-2 Ed3.0 Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility requirements (EMC)Public Comment
BS EN 62040-5-3 Ed1.0 Uninterruptible power systems (UPS) - Part 5-3: Method of specifying the performance and test requirements for d.c. UPSPublic Comment
BS EN 62052-11/Amd1 Electricity metering equipment (ac) - General requirements, tests andtest conditions Part 11 Metering equipmentApproval
BS EN 62052-21/Amd1 equipment (ac) - General requirements, tests andtest conditions Part 21 Tariff and load control equipmentApproval
BS EN 62052-31 Electricity metering equipment (AC) - General requirements, tests and test conditions Part 31: Product safety requirements and testsPublication
BS EN 62053-11/Amd1 Electricity metering equipment (AC)- Particular requirements Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)Approval
BS EN 62053-21/Amd1 equipment (AC)- Particular requirements Part 21: Static meters for active energy (classes 1 and 2)Approval
BS EN 62053-22/Amd1 equipment (AC)- Particular requirements Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)Approval
BS EN 62053-23/Amd1 Electricity metering equipment (a.c.) - Particular requirements Part 23: Static meters for reactive energy (classes 2 and 3)Approval
BS EN 62053-24/Amd1 equipment (AC)- Particular requirements Part 24: Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1)Approval
BS EN 62053-41 Electricity metering equipment (DC direct current) Particular requirements - Part 41 - Static meter for active energy (class 0.5 and 1)Accepted
BS EN 62054-11/Amd1 Electricity metering (a.c.) - Tariff and load control Part 11: Particular requirements for electronic ripple control receiversApproval
BS EN 62054-21/Amd1 Electricity metering (a.c.) - Tariff and load control Part 21: Particular requirements for electronic ripple control receiversPublic Comment
BS EN 62056-4-7 Electricity metering - Data exchange for meter reading; tariff and load control Part 4-7: COSEM transport layers for IPv4 networksPublication
BS EN 62056-5-3 Ed 1.0 /A1 ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE Part 5-3: DLMS/COSEM application layerPublication
BS EN 62056-5-3 Ed 3.0 ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE Part 5-3:DLMS/COSEM application layerPublic Comment
BS EN 62056-6-1 Ed 3.0 ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE Part 6-1: Object Identification System (OBIS)Public Comment
BS EN 62056-6-1 ED2 Metering Data Exchange - The DLMS/COSEM Suite Part 6-1: Object Identification System (OBIS)Publication
BS EN 62056-6-2 Ed 1.0 /A1 Ammendment 1 - Electricity metering data exchange - The DLMS/COSEM suite -Part 6-2: COSEM interface classesPublication
BS EN 62056-6-2 Ed 3.0 ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE Part 6-2: COSEM interface classesPublic Comment
BS EN 62056-7-3 ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - Part 7-3: Wired and wireless M-Bus communication profiles for local and neighbourhood networksPublic Comment
BS EN 62056-7-5 Ed1.0 The DLMS/COSEM suite Part 7-5: Communication profiles for local data transmissionPublication
BS EN 62056-8-6 ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE Part 8-X: DMT PLC profile for neighbourhood networksPublic Comment
BS EN 62057-1 Test equipment; techniques and procedures for electrical energy meters Part 1: Stationary Meter Test Units (MTU)Accepted
BS EN 62153-4-16 METALLIC COMMUNICATION CABLE TEST METHODS Part 4-16: Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-upPublic Comment
BS EN 62153-4-17 Metallic Communication Cable test methods - Part 4-17: Electromagnetic compatibility (EMC) – Reduction factor test methodAccepted
BS EN 62153-4-6 Metallic Communication Cable test methods Part 4-6: Electromagnetic compatibility (EMC) - Surface transfer impedan impedance - line injection methodAccepted
BS EN 62211 Inductive components - Reliability managementPublic Comment
BS EN 62246-1-1 Reed switches Part 1-1: Detail specification - Quality assessmentAccepted
BS EN 62276 Ed. 3.0 Single crystal wafers for surface acoustic wave (SAW) device application - specifications and measuring methodsPublication
BS EN 62317-12 Ferrite cores - Dimensions Part 12: Ring coresPublic Comment
BS EN 62325-351 Ed 2.0 Framework for energy market communications Part 351: CIM European market model exchange profilePublication
BS EN 62325-451-6 Framework for energy market communications Part 451-6: Publication of information on market; contextual and assembly models for European marketPublication
BS EN 62351-11 Power systems management and associated information exchange - Data and communications security Part 11: Security for XML filesPublic Comment
BS EN 62361-100 ED 1.0 Harmonization of Quality Codes across TC 57 - Part 100: Naming and design rules for CIM profiles to XML schema mappingPublication
BS EN 62361-101 Power systems management and associated information exchange - Interoperability in the long term Part 101: Common Information Model ProfilesAccepted
BS EN 62424 Ed 2.0 control engineering - Request in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools.Publication
BS EN 62443-4-1 Industrial communication networks - Security for industrial and control systems Part: 4-1: Product development requirementsPublic Comment
BS EN 62443-4-2 Industrial communication networks - Security for industrial automation and control systems Part 4-2: Technical security requirements for IACS compnentsAccepted
BS EN 62477-1 Ed 2.0 Safety requirements for power electronic converter systems and equipment- Part 1: GeneralIdea
BS EN 62477-1:2012+A1 Safety requirements for power electronic converter systems and equipment- Part 1: GeneralApproval
BS EN 62477-2 Safety Requirements for Power Electronic Converter Systems and Equipment - Part 2: Power Electronic Converters from 1000 V a.c. or 1500 V d.c. up to 36 kV a.c. or 54 kV d.c.Accepted
BS EN 62488-2 Power line communication systems for power utility applications Part 2: Analogue power line carrier terminals (APLC) NULLPublic Comment
BS EN 62504:204+A1 General lighting - Light emitting diode (LED) products and relatedequipment - Terms and definitionsPublic Comment
BS EN 62532+A1 Fluorescent induction lamps - Safety specificationsPublication
BS EN 62536 Coordinated telebiometric multimodal interaction databasenull
BS EN 62550 Spare Parts ProvisioningPublic Comment
BS EN 62559-1 Use Case Methodology Part 1: Concept and Processes in StandardizationAccepted
BS EN 62559-3 Use case methodology Part 3: Definition of use case template artefacts into an XML serialized formatPublic Comment
BS EN 62569-1 Generic specification of information on products - Part 1: Principles and methodsAccepted
BS EN 62604-2 Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality Part 2: Guidelines for the useAccepted
BS EN 62609-1 Insulators for overhead lines - Composite line post insulators Part 1 - Definitions, End Fittings and Designationsnull
BS EN 62612 +A1 Self-ballasted LED lamps for general lighting services with supply voltages IECXXXYYY2 50V - Performance requirements Amendment 1Publication
BS EN 62612:2013 lighting services with supply voltages >50V -Performance requirementsPublic Comment
BS EN 62631-2-1 Dielectric and resistive properties of solid insulating materials Part 2-1: Relative permittivity and dissipation factor - Technical Frequencies (0.1 Hz - 10 MHz), AC MethodsPublic Comment
BS EN 62631-3-1 Guidelines for the determination of dielectric and resistive properties of solid insulating materials Part 3-1: Determination of resistive properties (DC Methods) - Volume resistance and volume resistivity, general methodPublication
BS EN 62631-3-11 Dielectric and resistive properties of solid insulating materials Part 3-11: Determination of resistive properties (DC Methods) - Volume resistance and volume resistivity, method for impregnation and coating materialsPublic Comment
BS EN 62631-3-4 Dielectric and resistive properties of solid insulating materials Part 3-4: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity at elevated temperaturesAccepted
BS EN 62643-1 ELECTROSTATIC MICRO ELECTRO MECHANICAL SYSTEMS (MEMS) OSCILLATORS OF ASSESSED QUALITY - Part 1: Generic specificationAccepted
BS EN 62656-5 Standardized product ontology register and register by spreadsheets - Part 5: Interface for activity descriptionPublic Comment
BS EN 62663-1 Non-self-ballasted LED lamps Part 1: Safety requirementsPublic Comment
BS EN 62663-2 Non-ballasted single capped LED lamps for general lighting - Part 2: Performance requirementsPublic Comment
BS EN 62677-3-103 Heat-shrinkable low and medium voltage moulded shapes Part 3: Material requirements - Sheet 103: Heat-shrinkable; polyolefin; semi-conductive moulded shapes for medium voltage applicationsAccepted
BS EN 62717 LED modules for general lighting - Performance requirementsPublic Comment
BS EN 62772 Composite hollow core station post insulators for substations with a.c. and d.c.voltages greater than 1 000 V - Definitions, test methods and acceptance criteriaPublic Comment
BS EN 62783-1Ed.1 TWINAX CABLES FOR DIGITAL COMMUNICATIONS - Part 1: GENERIC SPECIFICATIONPublic Comment
BS EN 62783-2 TWINAX CABLES FOR DIGITAL COMMUNICATIONS Part 2: CABLE FOR ETHERNET-OVER-TWINAX PHYSICAL INTERFACESAccepted
BS EN 62786 Smart Grid User Interface: Demand Side Energy Sources Interconnection with the GridAccepted
BS EN 62807-1 Hybrid telecommunication cablesAccepted
BS EN 62832 Industrial-process measurement; control and automation - Reference model for representation of production facilities (Digital Factory)Accepted
BS EN 62881 Cause & Effect TablePublic Comment
BS EN 62884-1 Measurement techniques of piezoelectric, dieletiric and electrostatic oscillators Part 1: Basic methods for the measurementPublic Comment
BS EN 62884-3 Measurement techniques of piezoelectric, dieletiric and electrostatic oscillators Part 3: Frequency aging test methodsAccepted
BS EN 62884-4 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Part 4: Short-term frequency stability test methodsAccepted
BS EN 62890 Ed. 1.0 Life-cycle management for systems and products used inindustrial-process measurement, control and automationPublic Comment
BS EN 62909-1 Bi-directional grid connected power converters - Part 1: General requirementsPublic Comment
BS EN 62922 Organic light emitting diode (OLED) panels for general lighting - Performance requirementsPublic Comment
BS EN 62927 Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical testingPublic Comment
BS EN 62931 GX16t-5 capped tubular LED lamp - Safety specificationsPublic Comment
BS EN 62960 Dependability reviews during the life cycleIdea
BS EN 63013 LED packages packages - Long-term luminous flux maintenance projectionPublic Comment
BS EN 63041-1 Sensor devices using piezoelectric bulk or surface acoustic waves Part 1: Generic specificationsAccepted
BS EN 63041-2 Sensor devices using piezoelectric bulk or surface acoustic waves Part 2: Chemical sensors and BiosensorsAccepted
BS EN 63064 Guidance how to design graphical symbols for diagrams forstandardization and Inclusion in IEC 60617Idea
BS EN 80003-4 Quantities for e-health Part 4: BiologyAccepted
BS EN 80079-38 Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground minesPublication
BS EN 81346-2 and equipment and industrial products- Structuring principles and reference designations - Part 2: Classification of objects and codes for classesAccepted
BS EN 82079-1 Ed 2.0 Preparation of instructions for use - Structuring, content andpresentation - Part 1: General principles and detailed requirementsAccepted
BS EN dust layers by classification into burning classesAccepted
BS EN ISO/IEC 60079-13 IEC 60079-13 Explosive atmospheres Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"Public Comment
BS EN WI 16863 buildings - Factory made reflective insulation products (RI) - SpecificationPublic Comment
BS ENISO 80000-10 Quantities and units Part 10: Atomic and nuclear physicsPublic Comment
BS ENISO 80000-2 Quantities and units Part 2: MathematicsPublic Comment
BS ENISO 12572 Hygrothermal performance of building materials and products - Determination of water vapour transmission properties (ISO 12572:2001)Approval
BS ENISO 16852 requirements, test methods and limits for useApproval
BS ENISO 52000-1 Overarching EPB assessment Part 1: General framework and proceduresPublic Comment
BS ENISO 7345:1995/A1 Thermal insulation - Physical quantities and definitions (ISO 7345:1987)Public Comment
BS ENISO 80000-12 Quantities and units Part 12: Solid state physicsPublic Comment
BS ENISO 80079-36null
BS IEC 60050-617 Ed.1.0 Amd 2 International Electrotechnical Vocabulary Part 617: Organization/Market of electricityPublic Comment
BS IEC 60050-692 International Electrotechnical Vocabulary Part 692: Electric power systems: dependability and quality of servicePublic Comment
BS IEC 60050-726 Ed2.0 IEC 60050-726. International electrotechnical vocabulary. Transmissionlines and waveguidesPublic Comment
BS IEC 60153-4 Ed3.0 HOLLOW METALLIC WAVEGUIDES Part 4: Relevant specifications for circular waveguidesPublic Comment
BS IEC 60809 Ed3.0 Amd 1 electrical and luminous requirements Amendment 1Public Comment
BS IEC 61000-4-12 Ed3.0 Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity testPublic Comment
BS IEC 61000-4-31 Ed1.0 Electromagnetic compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity testApproval
BS IEC 61156-5 Ed3.0 cables for digital communications Part 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Horizontal floor wiring -Sectional specificationAccepted
BS IEC 61156-6 Ed4.0 cables for digital communications Part 6: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Work area wiring - Sectional specificationAccepted
BS IEC 61850-6 am1 Ed. 2.0 for power utility automation Part 6: Configuration description language for communication in electrical substations related to IEDsPublic Comment
BS IEC 61850-9-3 power utility automation Part 9-3: Precision time protocol profile for power utility automation (proposed IEC 61850-9-3)Publication
BS IEC 61970-453 Ed2.0 Amd 1 application program interface (EMS-API) Part 453: Diagram layout profilePublic Comment
BS IEC 62035 Ed2.0+A1 fluorescent lamps) - Safety specificationsPublication
Opens a new windowBS IEC 62325-451-1 Ed2.0 Framework for energy market communications Acknowledgement business process and contextual model for CIM European marketPublic Comment
BS IEC 62351-7 Ed1.0 information exchange - Data andcommunications security Part 7: Network and system management (NSM) data object modelsPublic Comment
BS IEC 62351-9 Ed.1.0 associated information exchange - Data andcommunications security Part 9: Cyber security key management for power system equipmentPublic Comment
BS IEC 62443-2-4 measurement and control - Network and system security Part 2-4: Certification of IACS supplier security policies and practicesApproval
BS IEC 62501 Ed.1 Amd 2 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testingAccepted
BS IEC 62751-1 Ed1.0 Amd 1 sourced converter (VSC) valves for high-voltagedirect current (HVDC) systems - Part 1: General requirementsIdea
BS IEC 62853 Ed1.0 Open Systems DependabilityAccepted
BS IEC/TR 61850-80-3 for power utility automation Part 80- 3: Mapping to web protocols – Requirement analysis and technology assessmentPublication
BS IEC/TR 61850-90-17 Ed1.0 for power utility automation Part 90-17: Using IEC 61850 to transmit power quality dataApproval
BS IEC/TS 61970-555 Ed1.0 Energy management system application program interface (EMS-API) - Part 555: CIM based efficient model exchange format (CIM/E)Approval
BS IEC/TS 61970-556 Ed1.0 Energy management system application program interface (EMS-API) - Part 556: CIM based graphic exchange format (CIM/G)Approval
BS IEC/TS 62056-8-20 Ed1.0 The DLMS/COSEM suite Part 8-20: Mesh communication profile for neighbourhood networksApproval
BS ISO 80000-7 Quantities and units Part 7: Light and radiationPublic Comment
BS ISO 10077-1 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance Part 1: GeneralAccepted
BS ISO 12631 Thermal performance of curtain walling - Calculation of thermal transmittancePublic Comment
BS ISO 18437-6 Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials Part 6: Time-temperature shiftingAccepted
BS ISO 2631-5 Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration Part 5: Method for evaluation of vibration containing multiple shocksAccepted
BS ISO 80000-11 Quantities and units Part 11: Characteristic numbersAccepted
BS ISO 80000-9 Quantities and units Part 9: Physical chemistry and molecular physicsAccepted
BS ISO 80003-2 Physiological quantities and their units Part 2: PhysicsAccepted
BS ISO 80003-3 Physiological quantities and their units Part 3: ChemistryAccepted
BS ISO 81346-12 Ed1.0 equipment and industrial products- Structuring principles and reference designations - Part 12: Construction worksAccepted
BS ISO/IEC 80079-20-1 Explosive atmospheres Part 20-1: Material characteristics for gas and vapour classification - Test methods and dataPublic Comment
PD CISPR/TR 16-4-4/Am 1 Ed. 2.0 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio servicesAccepted
PD CISPR/TR 18-1 Ed. 3.0 Radio interference characteristics of overhead power lines and high-voltage equipment - Part 1: Description of phenomenaApproval
PD CISPR/TR 18-2 Ed. 3.0 Radio interference characteristics of overhead power lines and high-voltage equipment - Part 2: Methods of measurement and procedure for determining limitsApproval
PD CISPR/TR 18-3 Ed. 3.0 Radio interference characteristics of overhead power lines and high-voltage equipment - Part 3: Code of practice for minimizing the generation of radio noiseApproval
PD CLC/TS 62896 Hybrid insulators for a.c. and d.c. applications with voltage greater than 1 000 V-- Definitions, test methods and acceptancecriteriaPublication
PD IEC 60870-5-104 Ed2.0+A1 60870-5-104 Ed.2: Telecontrol equipment and systems Part 5-104: Transmission protocols - Network access for IEC 60870-5-101 using standard transport profilesPublication
PD IEC/PAS 62992 Ed 1.0 IEC/PAS 62992/Ed.1: Simplification of Electrical EngineeringApproval
PD IEC/TR 60216-7-2 Ed1.0 materials – Thermal endurance properties Part 7-2: Results of the round robin tests to validate procedures of IEC/TS 60216-7-1 by non-isothermal kinetic analysis of thermogravimetric dataPublication
PD IEC/TR 60493-3 Ed 1.0 Guide for the statistical analysis of aging test data Part 3: Minimum specimen numbers at different test conditions with given experimental dataAccepted
PD IEC/TR 60893-4 Ed 2.0 /A1 AMENDMENT 1: Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 4: Typical valuesApproval
PD IEC/TR 60919-1:2010+A2 Performance of high-voltage direct current (HVDC) systems withline-commutated converters - Part 1: Steady-state conditionsIdea
PD IEC/TR 61000-4-40 Ed 1.0 Electromagnetic compatibility (EMC) Part 4-40: Testing and measurement techniques - Digital methods for the measurement of power quantities under non-stationary conditionsAccepted
PD IEC/TR 61156-1-6 Ed1.0 pair/quad cables for digital communications Part 1-6: Exploratory DC-resistance values of floor-wiring and work-area cables for digital communicationsApproval
PD IEC/TR 61850-7-500 Use of logical nodes for modelling applications and related concepts andguidelines for substationsnull
PD IEC/TR 62001-1 High-voltage direct current (HVDC) systems – Guidance to the specification and design evaluation of AC filters Part 1: OverviewPublication
PD IEC/TR 62001-2 High-voltage direct current (HVDC) systems - Guidebook to thespecification and design evaluation of A.C. filters - Part 2: PerformancePublication
PD IEC/TR 62001-3 Ed 1.0 High-voltage direct current (HVDC) systems - Guidebook to the specification and design evaluation of AC filters - Part 3: ModellingPublication
PD IEC/TR 62001-4 High-voltage direct current (HVDC) systems – Guidance to the specification and design evaluation of AC filters Part 4: EquipmentPublication
PD IEC/TR 62153-4-16 Ed1.0 METALLIC COMMUNICATION CABLE TEST METHODS Part 4-16: Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-upApproval
PD IEC/TR 62351-13 Ed 1.0 Power systems management and associated information exchange - Data and communications security Part 13: Guidelines on what security topics should be covered in standards and specificationsPublication
PD IEC/TR 62357-1 Ed 2.0 Power systems management and associated information exchange Part 1: Reference architecturePublication
PD IEC/TR 62543:2011+A1:2013/A2 High-voltage direct current (HVDC) transmission using voltage sourcedconverters (VSC)Accepted
PD IEC/TR 62839-2 Environmental declaration Part 2: Optical/copper telecom accessories products specific rulesAccepted
PD IEC/TR 63021 Ed. 1.0 Natural graphite brush for rotating electrical machinery Part 1: Natural graphite brush for slip-ring in wound rotor-type asynchronous motor – Application informationApproval
PD IEC/TR 63022 Ed. 1.0 Model Universals – Specification and ExamplesApproval
PD IEC/TR 63037 Electrical interface specification for self ballasted lamps and controlgear in phase cut dimmed lighting systemsPublication
PD IEC/TR 63039 Ed 1.0 Probablistic risk analysis of technological systems - Estimation of final event rate at a given initial statePublication
PD IEC/TR 63065 Ed 1.0 Guidelines for operation and maintenance of HVDC converter stationsAccepted
PD IEC/TS 60034-25 Rotating electrical machines Part 25: A.C. Motors when used in power drive systems - Application guid eAccepted
PD IEC/TS 60034-30-2 Ed 1.0 Rotating electrical machines Part 30-2: Efficiency classes of variable speed AC motors (IE-code)Accepted
PD IEC/TS 60034-32 Ed1.0 Rotating electrical machines - Part 32: Measurement of stator end winding vibration at form wound windingsApproval
PD IEC/TS 60079-32-1 Ed 1.0 /A1 Amendment 1: Explosive atmospheres Part 32-1: Electrostatic hazards; guidanceApproval
PD IEC/TS 60079-43 Ed 1.0 Explosive atmospheres - Equipment in adverse service conditionsAccepted
PD IEC/TS 60079-46 Ed 1.0 Explosive atmospheres - Equipment assembliesAccepted
PD IEC/TS 60479-1 Ed 4.0 /A1 Amendment 1 - Effects of current on human beings and livestock Part 1: General aspectsPublication
PD IEC/TS 60479-2 Ed 4.0 Effects of current on human beings and livestock Part 2: Special aspectsAccepted
PD IEC/TS 60695-1-14 Ed 1.0 Fire hazard testing Part 1-14: Guidance on the different levels of power and electrical energy source classification related to the probability of ignition and fireAccepted
PD IEC/TS 60695-2-20 Fire hazard testing -- Part 2-20: Glowing/hot wire based test methods - Hot wire coil ignitability - Apparatus, confirmatory test arrangement and guidanceIdea
PD IEC/TS 60695-6-2 ED 3.0 TR Fire hazrd testing - Part: 6-2: Smoke obscuration - Summary and relevance of test methodsAccepted
PD IEC/TS 60815-4 ED 1.0 Selection and dimensioning of high-voltage insulators intended for usein polluted conditions - Part 4: Insulators for d.c. systemsApproval
PD IEC/TS 60870-5-604 Telecontrol equipment and systems Part 5-604: Conformance test cases for the IEC 60870-5-104 companion standardPublication
PD IEC/TS 61000-5-10 Ed 1.0 Guide to the application of HEMP and IEMI publicationsAccepted
PD IEC/TS 61463 Ed2.0 Bushings-Seismic QualificationPublication
PD IEC/TS 61508-3-1 Ed1.0 Functional safety ofelectrical/electronic/programmable electronic safety related systems - Part 3-1: Software requirements - Reuse of pre-existing software elements to implement all or part of a safety functionApproval
PD IEC/TS 61850-10-210 Ed 1.0 Communication networks and systems for power utility automation Part 10-210: IEC 61850 Interoperability tests - Hydro profileAccepted
PD IEC/TS 61850-80-1 Ed 2.0 Communication networks and systems for power utility automation Part 80-1: Guideline to exchanging information from a CDC- based data model using IEC 60870-5-101 or IEC 60870-5-104Publication
PD IEC/TS 62040-4-1 Ed 1.0 Uninterruptible power systems (UPS) - Part 4-1: Environmental aspects - Product category rules (PCR) for life cycle assessmentAccepted
PD IEC/TS 62332-3 Electrical insulation materials (EIM) and systems (EIS) - Thermal evaluation of combined liquid and solid components Part 3: Hermetic Motor-CompressorsPublication
PD IEC/TS 62361-102 Ed 1.0 Power systems management and associated information exchange - Interoperability in the long term Part 102: CIM - IEC 61850 harmonizationPublication
PD IEC/TS 62443-1-3 Industrial communication networks - Network and system security Part 1-3: System security compliance metricsPublic Comment
PD IEC/TS 62612 Self-ballasted LED-lamps for general lighting services >50 V - Performan ce requirementsIdea
PD IEC/TS 62666 Guidelines for the inclusion of documentation aspects in productstandardsPublication
PD IEC/TS 62832-1 Ed. 1.0 Industrial-process measurement, control and automation – Digital Factoryframework – Part 1: General principlesApproval
PD IEC/TS 62861 Guide to principal component reliability testing for LED light sources and LED luminairesApproval
PD IEC/TS 62898-1 Ed 1.0 Guidelines for the General Planning and Design of the Micro-GridAccepted
PD IEC/TS 62898-2 Ed 1.0 Technical requirements for operation and control of microgridsAccepted
PD IEC/TS 62913-1 Ed 1.0 Generic Smart Grid Requirements Part 1 - Specific Application of Methods & Tools for defining Generic Smart Grid RequirementsAccepted
PD IEC/TS 62913-2-1 Ed 1.0 Generic Smart Grid Requirements Part 2-1: Grid related DomainsAccepted
PD IEC/TS 62913-2-2 Ed 1.0 Generic Smart Grid Requirements Part 2-2: Market related DomainAccepted
PD IEC/TS 62913-2-3 Ed 1.0 Generic Smart Grid Requirements Part 2-3: Resources connected to the grid DomainsAccepted
PD IEC/TS 62913-2-4 Ed 1.0 Generic Smart Grid Requirements Part 2-4: Electric Transportation Domain (DCT8)Accepted
PD IEC/TS 62913-2-5 Ed 1.0 Generic Smart Grid Requirements Part 2-5: Support Functions DomainsAccepted
PD IEC/TS 62972 light emitting diode (OLED) products andrelated equipment - Terms and definitionsPublication
PD IEC/TS 62996 Industrial electroheating and electromagnetic processing equipment - Requirements on touch currents, voltages and electric fields from 1kHz to 6 MHzAccepted
PD IEC/TS 62997 Industrial electroheating and electromagnetic processing equipment - Evaluation of hazards caused by magnetic nearfields from 1 kHz to 6 MHzAccepted

[ back to top ]

Published standards (70)

Sort by: Reference | Title | Status

Standard referenceNameStatus
BS EN 60626-1:1996Combined flexible materials for electrical insulation - Definitions and general requirementsWithdrawn
BS EN 60626-1:2012Combined flexible materials for electrical insulation - Definitions and general requirementsCurrent
BS EN 60276:1996Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-ringsCurrent, Work in Hand
BS 5406-1:1988Disturbances in supply systems caused by household appliances and similar electrical equipment - Glossary of termsWithdrawn
BS 142-1-1.1:1982Electrical protection relays. Information and requirements for all protection relays - Glossary of protection relay termsWithdrawn
PD IEC TR 62051:1999Electricity metering. Glossary of termsCurrent
BS 6458-1:1990Fire hazard testing for electrotechnical products - Glossary of termsWithdrawn
BS EN 61508-4:2002Functional safety of electrical/ electronic/ programmable electronic safety-related systems - Definitions and abbreviationsWithdrawn
BS EN 61508-4:2010Functional safety of electrical/electronic/ programmable electronic safety related systems - Definitions and abbreviationsCurrent
DD IEC/TS 62504:2011General lighting. LEDs and LED modules. Terms and definitionsWithdrawn
BS EN 62504:2014General lighting. Light emitting diode (LED) products and related equipment. Terms and definitionsCurrent, Work in Hand
BS EN 61067-1:1997Glass and glass polyester fibre woven tapes - Definitions, classification and general requirementsCurrent
BS 4727-1:Group 01:1983Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics - Fundamental terminologyWithdrawn
BS 4727-1:Group 07:1991Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics - Magnetic materials and componentsCurrent
BS 4727-1:Group 02:1980Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics - Electrical and magnetic devices terminologyWithdrawn
BS 4727-1:Group 03:1971Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics - Relay terminologyWithdrawn
BS 4727-1:Group 10:1991Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics - Insulating solids, liquids and gasesWithdrawn
BS 4727-1:Group 09:1991Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics - Electromagnetic compatibilityWithdrawn
BS 4727-1:Group 12:1991Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics - InsulatorsCurrent, Work in Hand
BS 4727-2:Group 19:1997Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Power system protectionWithdrawn
BS 4727-2:Group 08:1994Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Electric cablesWithdrawn
BS 4727-2:Group 04:1991Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Power transformers and reactorsCurrent
BS 4727-2:Group 18:1992Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Electric tractionWithdrawn
BS 4727-2:Group 10:1985Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Industrial electroheating terminologyCurrent
BS 4727-2:Group 05:1972Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Voltage fluctuation terminologyWithdrawn
BS 4727-2:Group 07:1973Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Tariffs terminologyWithdrawn
BS 4727-2 Group 03:1971Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Rotating machinery terminologyWithdrawn
BS 4727-2:Group 06:1985Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Switchgear and controlgear terminology (including fuse terminology)Withdrawn
BS 4727-2:Group 09:1981Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Transductor terminologyCurrent
BS 4727-2:Group 16:1991Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Instrument transformersCurrent
BS 4727-2:Group 17:1992Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Secondary cells and batteriesCurrent
BS 4727-2:Group 15:1991Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Overhead linesCurrent
BS 4727-2:Group 11:1986Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Generation, transmission and distribution of electricity terminologyWithdrawn
BS 4727-2:Group 13:1991Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering - Electrical apparatus for explosive atmospheresCurrent, Work in Hand
BS EN 60071-1:1996Insulation co-ordination - Definitions, principles and rulesWithdrawn
BS EN 62223:2009Insulators. Glossary of terms and definitionsCurrent
BS IEC 60050-651:1999International electrotechnical vocabulary - Live workingWithdrawn
BS IEC 60050-651:2014International Electrotechnical Vocabulary - Live workingCurrent
BS IEC 60050-551:1998International electrotechnical vocabulary - Power electonicsCurrent
BS IEC 60050-442:1998International electrotechnical vocabulary - Electrical accessoriesCurrent
BS IEC 60050-195:1998International electrotechnical vocabulary - Earthing and protection against electric shockCurrent
BS IEC 60050-101:1998International electrotechnical vocabulary - MathematicsCurrent
BS IEC 60050-821:1998International electrotechnical vocabulary - Signalling and security apparatus for railwaysCurrent, Work in Hand
BS IEC 60050(411):1996International electrotechnical vocabulary - Rotating machinesCurrent, Work in Hand
BS IEC 60050-113:2011International electrotechnical vocabulary - Physics for electrotechnologyCurrent
BS IEC 60050-351:1998International electrotechnical vocabulary - Automatic controlWithdrawn
BS IEC 50(481):1996International electrotechnical vocabulary - Primary cells and batteriesWithdrawn
BS EN 60763-1:2011Laminated pressboard for electrical purposes - Definitions, classification and general requirementsCurrent
BS EN 62333-1:2006Noise suppression sheet for digital devices and equipment - Definitions and general propertiesCurrent
BS EN 60819-1:1996Non-cellulosic papers for electrical purposes - Definitions and general requirementsWithdrawn
BS EN 60819-1:2012Non-cellulosic papers for electrical purposes - Definitions and general requirementsCurrent
BS EN 61061-1:1998Non-impregnated densified laminated wood for electrical purposes - Definitions, designations and general requirementsWithdrawn
BS EN 61061-1:2006Non-impregnated densified laminated wood for electrical purposes - Definitions, designation and general requirementsCurrent
BS EN 61068-1:1997Polyester fibre woven tapes - Definitions, designation and general requirementsCurrent
BS EN 13237:2003Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheresWithdrawn
BS EN 13237:2012Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheresCurrent
BS 4778-3.1:1991Quality vocabulary. Availability, reliability and maintainability terms - Guide to concepts and related definitionsCurrent
BS 4778-3.2:1991Quality vocabulary. Availability, reliability and maintainability terms - Glossary of international terms - 3.2 glossay of international termsCurrent, Work in Hand
BS EN 80000-6:2008Quantities and units - ElectromagnetismCurrent
BS EN 60034-16-1:2011Rotating electrical machines - Excitation systems for synchronous machines. DefinitionsCurrent
BS EN 60034-16-1:1996Rotating electrical machines. Excitation systems for synchronous machines - DefinitionsWithdrawn
BS 5664-1:1978Solventless polymerisable resinous compounds used for electrical insulation - Definitions and general requirementsWithdrawn
BS EN 60684-1:1996Specification for flexible insulating sleeving - Specification for general requirementsWithdrawn
BS EN 60763-1:1996Specification for laminated pressboard - Definitions, classification and general requirementsWithdrawn
BS EN 60641-1:1996Specification for pressboard and presspaper for electrical purposes - Definitions and general requirementsWithdrawn
BS EN 61360-4:1997Standard data element types with associated classification scheme for electric components - Data element type definitionsWithdrawn
PD IEC/PAS 60099-7:2004Surge arresters - Glossary of terms and definitions from IEC publications 60099-1, 60099-4, 60099-6, 61643-1, 61643-12, 61643-21, 61643-311, 61643-321, 61643-331 and 61643-341Current
BS EN 60633:1999+A2:2015Terminology for high-voltage direct current (HVDC) transmissionCurrent
BS EN 60401-1:2005Terms and nomenclature for cores made of magnetically soft ferrites - Terms used for physical irregularitiesCurrent
BS EN 60464-1:1999Varnishes used for electrical insulation - Definitions and general requirementsCurrent

[ back to top ]

Committees (33)

Sort by: Reference | Name

Committee ReferenceTitle
EPL/46Cables, wires and waveguides, radio frequency connectors and accessories for communication and signalling
DS/1Dependability
GEL/3Documentation and graphical symbols
CPL/34/1Electric lamps
JPEL/64Electrical installations of buildings - Joint committee
GEL/28Electrical Insulation Co-ordination
PEL/13Electricity Meters
PEL/27Electroheating
GEL/1Electrotechnical Terminology
GEL/210/11EMC - Standards Committee
B/540Energy performance of materials components and buildings
EXL/31Equipment for explosive atmospheres
GEL/112Evaluation and qualification of electrical insulating materials and systems
EXL/23Explosion and fire precautions in industrial and chemical plant
GEL/89Fire hazard testing
SS/7General metrology, quantities, units and symbols
EPL/94General purpose relays and reed contact units
PEL/36Insulators for power systems
CPL/34Lamps and Related Equipment
GEL/65Measurement and control
PEL/95Measuring relays and protection systems
GME/21Mechanical vibration, shock and condition monitoring
EPL/49Piezoelectric devices for frequency control and selection
PEL/22Power electronics
PEL/57Power systems management and associated information exchange
GEL/15/7Resins and varnishes
PEL/2Rotating electrical machinery
GEL/15Solid electrical insulating materials
PEL/37Surge Arresters - High Voltage
PEL/37/1Surge Arresters - Low Voltage
GEL/65/1System considerations
GEL/8Systems Aspects for Electrical Energy Supply
EPL/51Transformers, inductors, magnetic components and ferrite materials

[ back to top ]

Recently Viewed
Need Help?

We are here to help you with any queries. Email us for help.

But first, why not view the Help Pages?