Skip to content
RSS feed for this category

Environment, health protection & safety

Standards in development (428)

Sort by: Title | Status

Standard TitleStatus
BS 1363-1 13 A plugs, socket outlets, adaptors and connection units Part 1: Specification for rewirable and non-rewirable 13 A fused plugsnull
BS 1363-2 13 A plugs, socket outlets, adaptors and connection units Part 2: Specification for 13 A switched and unswitched socket-outletsnull
BS 1363-3 13 A plugs, socket-outlets, adaptors and connection units Part 3: Specification for adaptorsnull
BS 1363-4 13 A plugs, socket-outlets, adaptors and connection units Part 3: Specification for 13 A fused connection units switched and unswitchednull
BS 1363-5 13 A plugs, socket-outlets, adaptors and connection units Part 3: Specification for 13 A fused connection units switched and unswitchednull
BS 7958 Closed circuit television (CCTV) – Management and operation – Code ofpracticeIdea
BS 8485 Code of practice for the characterization and remediation from groundgas in affected developmentsIdea
BS 8546 Multiple or simple travel adaptors with compatibility with UK plug andsocket system - SpecificationIdea
BS 8584 Vacant property protection Code of practiceIdea
BS 8610 Personal fall equipment Structural anchors and anchor systems not covered by BS EN 795Accepted
BS EN 1018:2013/A1 Chemicals used for treatment of water intended for human consumption - Calcium carbonateApproval
BS EN 12392 Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipmentPublic Comment
BS EN 1253-1 Gullies for buildings Part 1: Trapped floor gullies with a depth water seal of at least 50 mmApproval
BS EN 1253-2 Gullies for buildings Part 2: Roof drains and floor gullies without trapPublication
BS EN 12671 Chemicals used for treatment of water intended for human consumption - Chlorine dioxide generated in situPublic Comment
BS EN 12674-4 Roll containers Part 4: Performance requirementsApproval
BS EN 12678 Chemicals used for treatment of water intended for human consumption - Potassium peroxomonosulfatePublic Comment
BS EN 12876 Chemicals used for treatment of water intended for human consumption - OxygenApproval
BS EN 12926 Chemicals used for treatment of water intended for human consumption - Sodium peroxodisulfateApproval
BS EN 12931 Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, anhydrousApproval
BS EN 12932 Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, dihydrateApproval
BS EN 12933 Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Trichloroisocyanuric acidApproval
BS EN 12972 Tanks for transport of dangerous goods Testing, inspection and marking of metallic tanksApproval
BS EN 13082 Tanks for transport of dangerous goods Service equipment for tanks Vapour transfer valveIdea
BS EN 13094 Tanks for transport of dangerous goods -Metallic tanks with a working pressure not exceeding 0,5 bar - Design and constructionApproval
BS EN 1317-5 Road restraint systems Part 5: Product requirements, test / assessment methods and acceptance criteria for vehicle restraint systemsPublic Comment
BS EN 13176 Chemicals used for treatment of water intended for human consumption - EthanolApproval
BS EN 13194 Chemicals used for treatment of water intended for human consumption - Acetic AcidApproval
BS EN 13204 Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirementsIdea
BS EN 13508-2:2003+A1: Investigation and assessment of drain and sewer systems outsidebuildings. Visual inspection coding systemnull
BS EN 13794 Respiratory protective devices - Self-contained breathing apparatus for escape - Requirements, testing, markingPublic Comment
BS EN 1396 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - SpecificationsTechnical Review
BS EN 14025:2013/A1 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and constructionAccepted
BS EN 14368 Products used for treatment of water intended for human consumption - Manganese dioxide coated limestoneApproval
BS EN 14369 Products used for treatment of water intended for human consumption - Iron-coated granular activated aluminaApproval
Opens a new windowBS EN 14405 Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions)Public Comment
BS EN 14429 Characterization of waste - Leaching behaviour tests - Influence of pH on leaching with initial acid/base additionApproval
BS EN 14533 Textiles and textile products - Burning behaviour of bbedding items - Classification schemeApproval
Opens a new windowBS EN 14595 Tanks for the transport of dangerous goods Service equipment for tanks Pressure and Vacuum Breather VentPublic Comment
BS EN 14742 Characterization of Sludges - Laboratory chemical conditioning procedureTechnical Review
BS EN 14986 Design of fans working in potentially explosive atmospheresPublic Comment
BS EN 14997 Characterization of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH controlApproval
BS EN 15002 Characterization of waste - Preparation of test portions from the laboratory sampleTechnical Review
BS EN 15030:2012/A1 Chemicals used for treatment of water intended for human consumption - Silver salts for intermittent useApproval
BS EN 15074 Chemicals used for treatment of swimming pool water - OzonePublication
BS EN 15207 Tanks for transport of dangerous goods - Plug/socket connection and supply characteristics for service equipment in hazardous areasPublication
BS EN 1559-4 Founding - Technical conditions of delivery Part 4: Additional requirements for aluminium alloy castingsApproval
BS EN 15863 Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with periodic leachant renewal, under fixed test conditionsTechnical Review
BS EN 15969-1 Tanks for the transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities Part 1: Protocol specification - Control, measurement and event dataPublic Comment
BS EN 16397-1 Flexible couplings Part 1: Performance requirementsApproval
BS EN 16397-2 Flexible couplings Part 2 - Materials and dimensions for metal banded flexible couplingsApproval
BS EN 16424:2014 CORR 1 Characterization of waste - Screening methods for the elementcomposition by portable X-ray fluorescence instruments ,,Publication
BS EN 16657 WI 00296072 dangerous goods - Transport tank equipment for overfill prevention devices for static tanksPublic Comment
BS EN 16710 analysis to support designPublic Comment
BS EN 16720-1 Characterization of sludges - Physical consistency Part 1: Determination of flowability - Method by extrusion tube apparatusrPublic Comment
BS EN 16720-2 Characterization of sludges - Physical consistency Part 2: Determination of solidity - Method by pocket vane shear apparatusPublic Comment
BS EN 16747 Maritime and port security servicesPublic Comment
BS EN 16751 Bio-based products - Sustainability criteriaPublic Comment
BS EN 16760 Bio-based products - Life Cycle AssessmentPublic Comment
BS EN 16773 Aluminium and aluminium alloys - Guideline for the production thin foil in the field of containers for foodstuffs fabricationPublic Comment
Opens a new windowBS EN 16778 Protective gloves - The determination of Dimethylformamide in glovesPublic Comment
Opens a new windowBS EN 16785 Bio-based products - Determination of the bio-based content - Method based on the 14C content and elemental analysisPublic Comment
BS EN 1839 Determination of explosion limits of gases and vapours and determination of the limiting oxygen concentration (LOC) for flammable gases and vapoursPublic Comment
BS EN 2084 Aerospace series - Cables, electrical, general purpose, with conductors In copper or copper alloy - Technical specificationTechnical Review
BS EN 2235 Aerospace series - Single and multicore electrical cables, screened and jacketedApproval
BS EN 2266-008 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C Part 008 : DRP (Pair) DRT(3 cores) DRQ (4 cores) family, multicore UV laser printable jacketed cable - Product standardTechnical Review
BS EN 2267-002 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C Part 002: GeneralApproval
BS EN 2267-011 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 65 °C and 260 °C Part 011: DZA family, single and multicore assembly for use in low pressure atmosphere - Product standardTechnical Review
BS EN 2267-012 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -65 °C and 260 °C Part 012: DZ family, single UV laser printable for use in low pressure atmosphere - Product standardTechnical Review
BS EN 2591-227 Aerospace series - Elements of electrical and optical connection - Test methods Part 227: Partial discharges testPublic Comment
BS EN 2593-001 Aerospace series - Bases for 10 A electromagnetic plug-in relays, two and four poles double throw Part 001 : Technical specificationPublication
BS EN 2997-009 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous - 200 °C continuous, 260 °C peak Part 009: Protective cover for receptacle - Product standardApproval
BS EN 2997-010 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak Part 010: Protective cover for plug - Product standardApproval
BS EN 3155-020 Aerospace Series. Electrical contacts used in elements of connection Size 10 Contact, electrical, triaxial, male 020, type D, crimp, class R, Product StandardAccepted
BS EN 3155-021 Aerospace Series. Electrical contacts used in elements of connection Contacts, electrical, triaxial, size 10 female, type D, crimp, class R - Product StandardAccepted
BS EN 3155-070 Aerospace series - Electrical contacts used in elements of connection Part 070: Contacts, electrical, male, type A, crimp, class S - Product standardPublication
BS EN 3155-071 Aerospace series - Electrical contacts used in elements of connection Part 071: Contacts, electrical, female, type A, crimp, class S - Product standardPublication
BS EN 3155-078 Aerospace series - Electrical contacts used in elements of connection Part 078: Contacts size 22 for EN 2997, electrical, male, type A, crimp, class S - Product standardPublication
BS EN 3155-079 Aerospace series - Electrical contacts used in elements of connection Part 079: Contacts size 22 for EN 2997, electrical, female, type A, crimp, class S - Product standardPublication
BS EN 3155-080 Aerospace series - Electrical contacts used in elements of connection Part 080: Contacts size 22 for EN 2997, electrical, male, type A, crimp, class T - Product standardPublication
BS EN 3155-081 Aerospace series - Electrical contacts used in elements of connection Part 081: Contacts size 22 for EN 2997, electrical, female, type A, crimp, class T - Product standardPublication
BS EN 3375-011 Aerospace series - Cable, electrical For digital data transmission - Part 011: Single braid - Star Quad 100 Ohms – light weight - Type KL - Product standardApproval
BS EN 343:2003/A1 Protective clothing - Protection against rainPublic Comment
BS EN 3475-307 Aerospace series - Cables, electrical, aircraft use - Test methods Part 307: Corona extinction voltagePublication
BS EN 3475-411 Aerospace series - Cables, electrical, aircraft use - Test methods Part 411: Resistance to fluidsPublication
BS EN 3545-005 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 C to 175 C Part 005: Female coding and attachment System for mounting on free housing (plug) - Product standardPublication
BS EN 3545-006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C Part 006: Male coding and attachment System for mounting on fixed housing (receptacle) - Product standardPublication
BS EN 3545-007 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C Part 007: Cable clamp - Product standardPublication
BS EN 3645-001 Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous Part 001: Technical specificationTechnical Review
BS EN 3645-002 Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous Part 002: Specification of performance and contact arrangementsPublication
BS EN 3645-003 Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling operating temperature 175 °C or 200 °C continuous Part 003: Wall-mount receptacle - Product standardApproval
BS EN 3645-006 Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling operating temperature 175 °C or 200 °C continuous Part 006: Protective cover for receptacle - Product standardApproval
BS EN 3645-007 Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous Part 007: Protective cover for plug - Product standardApproval
BS EN 3645-008 Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling operating temperature 175 °C or 200 °C continuous Part 008: Non release plug with grounding ring - Product standardApproval
BS EN 3646-007 Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous Part 007: Receptable, hermetic, round flange, welding or brazing mounting - Product standardApproval
BS EN 3646-009 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous Part 009: Protective cover for receptacle — Product standardApproval
BS EN 3646-010 Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous Part 010: Protective cover for plug - Product standardApproval
BS EN 3716-004 Aerospace Series - Connectors, single-way with triaxial interface, for transmission of digital data Part 004: Solder plug - Product StandardPublication
BS EN 374-2 Protective gloves against chemicals and micro-organisms Part 2: Determination of resistance to penetrationApproval
BS EN 3745-410 Aerospace series - Fibres and cables, optical, aircraft use - Test methods Part 410: Thermal lifeTechnical Review
Opens a new windowBS EN 388 Protective gloves against mechanical risksPublic Comment
BS EN 4056-001 Aerospace series - Cable ties for harnesses Part 001: Technical specificationPublication
BS EN 4056-004 Cable ties for harness Part 004 : Cable ties with provision for marking - Product standardPublication
BS EN 4165-013 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 - Product standardApproval
BS EN 4165-019 Aerospace series - Connectors, electrical, rectangular, modular, operating temperature 175 degrees C continuous Part 019: Protective cover for plug, for 2 or 4 modules series 2 and 3 - Product standardPublic Comment
BS EN 4199-004 Aerospace series - Bonding straps for aircraft Part 004: Round bonding straps, copper, tin plated - 65 °C up to 150 °C and nickel plated - 65 °C up to 260 °C - Product standardPublication
BS EN 4604-005 Aerospace series - Cable, electrical, for signal transmission Part 005: Cable, coaxial, 75 Ohms, 200 °C, type WL - Product standardApproval
BS EN 4608-004 Aerospace series Cable, electrical, fire resistant Single and twisted multicore assembly, screened (braided) and jacketed Operating temperatures between - 65 °C and 260 °C Part 004: DW family - lightweight - UV Laser printable - Product standardPublication
BS EN 4641-100 Aerospace series - Cables, optical 125 ?m diameter cladding Part 100: Tight structure 62,5/125 ?m core GI f - Fibre 1,8 mm outside diameter - Product standardPublication
BS EN 4641-101 Aerospace series - Cables, optical, 125 µm diameter cladding Part 101 : Tight structure 62.5 µm core GI fibre 0,9 mm outside diameter - Product StandardApproval
BS EN 4652-001 Aerospace series - Connectors, coaxial, radiofrequency Part 001: Technical specificationTechnical Review
BS EN 4652-002 Aerospace series - Connectors, coaxial, radiofrequency Part 002: Specification of performancesnull
BS EN 4652-110 Aerospace series - Connectors, coaxial, radio frequency Part 110: type 2 BNC interface, straight plug - Clamp assembly version - Product standardTechnical Review
BS EN 4652-111 Aerospace series - Connectors, coaxial, radio frequency Part 111: type 2 clamp assembly version - BNC interface, right angle plug - Product standardTechnical Review
BS EN 4652-112 Aerospace series - Connectors, coaxial, radio frequency Part 112: Type 1 BNC interface - Clamp nut assembly version - Square flange receptacle - Product standardTechnical Review
BS EN 4652-113 Aerospace series - Connectors, coaxial, radio frequency Part 113: Type 1, BNC interface - Clamp nut assembly version - Bulkhead receptacle - Product standardTechnical Review
BS EN 4652-211 Aerospace series - Connectors, coaxial, radiofrequency Part 211: TNC type, crimp assembly, right angle plug - Product standardTechnical Review
BS EN 4652-212 Aerospace series - Connectors, coaxial, radio frequency Part 212: Type 2, TNC interface - Clamp nut assembly version - Square flange receptacle - Product standardTechnical Review
BS EN 4652-310 Aerospace series - Connectors, coaxial, radio frequency Part 310: Type 3, N interface - Clamp nut assembly version - Straight plug - Product standardTechnical Review
BS EN 4674-001 Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve Part 001: Technical specificationPublication
BS EN 4674-002 Aerospace series - Electrical cables, installation Self-wrapping shielding (EMI) protective sleeve Part 002: General and list of product standardPublication
BS EN 4674-003 Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve Part 003: Open sleeve - Inside pressurized area - EMI protection 5 kA Temperature range - 65 °C to 200 °C - Product standardPublication
BS EN 4674-004 Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve Part 004: Open sleeve - Outside pressurized area - EMI protection 10 kA - Temperature range - 65 °C to 200 °C - Product standardPublication
BS EN 4681-005 Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium Part 005: AZ family, single, for use in low pressure atmosphere - Product standardTechnical Review
BS EN 4681-006 Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium Part 006: AZA family, single and multicore assembly, for use in low pressure atmosphere - Product standardTechnical Review
BS EN 4701-001 Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4531 contacts Part 001: Technical specificationPublication
BS EN 4708-101 Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification Part 101: Polyolefin sleevingTechnical Review
BS EN 4728 Aerospace series - Circuit breakers, single and three poles dummies - Product standardApproval
BS EN 482:2012/A1 Workplace exposure - Procedures for measuring a chemical agent present as mixture of airborne particles and vapour - Requirements and test methods - AMENDMENT 1: Additional requirements for the use of considerably lowered limit valuesPublic Comment
BS EN 50066 Miniature connecting devices in carsnull
BS EN 50130-4:2011/A1 Alarm systems Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systemsPublication
BS EN 50131-1:2006/A2 Alarm systems - Intrusion and hold-up systems Part 1: System requirementsIdea
BS EN 50131-2-Y Alarm systems - Intrusion and Hold up systems - Bolt contacts - Requirements for bolt contacts monitoring the lock status of doorsIdea
BS EN 50131-6:2008/A Alarm systems - Intrusion and hold-up systems Part 6: Power suppliesIdea
BS EN 50136-1 Alarm systems - Alarm transmission systems and equipment Part 1: General requirements for alarm transmission systemsIdea
BS EN 50321 Live working - Footwear for electrical protection - Insulating footwear and overbootsPublic Comment
BS EN 50398-1 Alarm systems - combined and integrated systems Part 1: General requirementsIdea
BS EN 50518 Monitoring and alarm receiving centresIdea
BS EN 50606 External Perimeter Security SystemsIdea
BS EN 60050-651 International Electrotechnical Vocabulary Part 651: Live workingPublication
BS EN 60204-1 ED 6.0 Safety of machinery - Electrical equipment of machines - Part 1: General requirementsPublic Comment
BS EN 60297-3-108 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 108: Dimensions of R-type subracks and plug-in unitsPublication
BS EN 60297-3-109 Mechanical structures for electronic equipment - Dimensions ofmechanical structures of the 482,6 mm (19 in) series - Part 109: dimensions of chassis for embedded computingAccepted
BS EN 6049-001 Electrical cables, installation - Protection sleeve in meta-aramid fibres Part 001: Technical specificationPublication
BS EN 6049-005 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres Part 005: Sleeve flexible, post installation - Product standardPublication
BS EN 6049-009 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres Part 009: Self-wrapping fire protection sleeve, flexible post installation operating temperature from - 55 °C to 260 °C - Product standardPublication
BS EN 60512-1-101 Connectors for electronic equipment - Basic testing and measurements Part 1-101x: Blank detail specificationPublic Comment
BS EN 60512-17-5 Connectors for electronic equipment - Tests and measurements - Part 17-5: Cable clamping tests - Test 17X: Cable clamp resistance to dynamic cablenull
BS EN 6059-100 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods Part 100: GeneralApproval
BS EN 6059-307 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 307: AgeingPublic Comment
BS EN 6059-308 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods Part 308 : Rapid change of temperaturePublication
BS EN 6059-502 Aerospace series - Electrical cables, installation Protection sleeves - Test methods Part 502: Resistance to electrical arcsPublication
BS EN 60603-7+A2 Connectors for electronic equipment Part 7: Detail specification for 8-way, unshielded, free and fixed connectorsAccepted
BS EN 60603-7-81 Connectors for electronic equipment Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2000 mhzAccepted
BS EN 60603-7-82 Connectors for electronic equipment Part 7-82: Detail specification for 8-way, shielded, individual pair shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 mhzAccepted
BS EN 60669-1 ED 4.0 Switches for household and similar fixed-electrical installations General requirementsAccepted
BS EN 60669-2-1 ED 4.0/A2 A2 Switches for household and similar fixed electrical installations Part 2-1: Particular requirements - Electronic switchesApproval
BS EN 60669-2-5 ED 1.0 Switches for household and similar fixed electrical installations - Part 2-5: Switches and related accessories for use in home and building electronic systems (HBES)Publication
BS EN 60670-1 ED 2.0 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirementsApproval
BS EN 60670-21 ED 1.0/A1 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 21: Particular requirements for boxes and enclosures with provision for suspension meansAccepted
BS EN 60670-22 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 22: Particular requirements for connecting boxes and enclosuresApproval
BS EN 60670-23 ED 1.0/A1 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosuresAccepted
BS EN 60695-1-11 Ed 2.0 Fire hazard testing Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessmentPublication
BS EN 60695-1-12 Fire hazard testing Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineeringApproval
BS EN 60695-1-20 Fire hazard testing Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidancePublic Comment
BS EN 60695-1-21 Fire hazard testing Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methodsAccepted
BS EN 60695-10-3 Ed 2.0 Fire hazard testing Part 10-3: Abnormal heat - Mould stress relief distortion testAccepted
BS EN 60695-11-10/COR1 IEC 60695-11-10 Part 11-10: Test flames – 50 W horizontal and vertical flame test methods CORRIGENDUM 1null
BS EN 60695-11-5 Ed 2.0 Fire hazard testing Part 11-5: Test flames - Needle-flame test method - Apparatus; confirmatory test arrangement and guidanceAccepted
BS EN 60695-8-2 Ed1.0 IEC 60695-8-2 Ed 1.0: Fire hazard testing Part 8-2: Heat release – Summary and relevance of test methodsApproval
BS EN 60839-11-31 Alarm and electronic security systems Part 11-31: Electronic access control systems - IP Interoperability implementation based on Web services - Core specificationAccepted
BS EN 60839-11-32 Alarm and electronic security systems Part 11-32: Electronic access control systems - IP interoperability implementation based on Web services - Access control specificationAccepted
BS EN 60855-1 Ed 2.0 Live working - Insulating foam-filled tubes and solid rods Part 1: Tubes and rods of a circular cross-sectionAccepted
BS EN 60884-2-5 Ed 1.0/A1 for household and similar purposes – Part 2-5: Particular requirements for adaptorsIdea
BS EN 60895 Ed3.0 Live working - Conductive clothingAccepted
BS EN 60900 Ed 4.0 Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.cPublic Comment
BS EN 60903 Ed 3.0 Live working - Electrical insulating glovesApproval
BS EN 60984 Ed 2.0 Live working – Electrical insulating sleevesApproval
BS EN 61057 ED 2.0 Live working - Aerial devices (MEWPs) with insulating boomIdea
BS EN 61058-1 Switches for appliances - Part 1: General requirementsPublic Comment
BS EN 61058-1-1 Switches for appliances - Part 1-1: Requirements for mechanical switch constructionsPublic Comment
BS EN 61058-1-2 Switches for appliances - Part 1-2: Requirements for electronic switch constructionsPublic Comment
BS EN 61076-1+A1 Connectors for electronic equipment - Product equirements Part 1: Generic specificationAccepted
BS EN 61076-2-104 Connectors for electronic equipment - Product requirements Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-lockingPublication
BS EN 61076-2-111 Connectors for electronics equipment Part 2-111: Circular connectors - Detail specification for plug and jack for 2 mm barrel-type battery charging interfaceAccepted
BS EN 61076-2-112 Connectors for electronic equipment Part 2-112: Product requirements - Circular connectors, Detail specification for M12 power connectors up to12 Amps with screw-lockingAccepted
BS EN 61076-2-113 Connectors for electronic equipment - Product requirements Part 2-113: circular connectors - Detail specification for connectors with data and power contacts with M12 screw-lockingAccepted
BS EN 61076-3-104 Connectors for electronic equipment - Product requirements Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHzAccepted
BS EN 61076-3-110 Connectors for electronic equipment - product requirements Part 3-110: detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 mhzAccepted
BS EN 61076-3-120 Connectors for electronic equipment - Product requirements Part 3-120: rectangular connectors -Detail specification for rewirable power connector with snap locking for 250 v d.c. And rated current of 30aAccepted
BS EN 61076-4-116+A1 equipment - Product requirements Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding functionPublic Comment
BS EN 6113 Aerospace series - Circuit breaker, connecting and attachment hardwareApproval
BS EN 61242:1997+A1:2008+A2 Electrical accessories – cable reels for household and similar purposesAccepted
BS EN 61243-3 Live working - Voltage detectors Part 3: Two-pole low-voltage typePublication
BS EN 61481-1 Live working - Phase comparators – Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.Approval
BS EN 61481-2 Live working - portable phase comparators for use on voltages exceeding 1 kv acApproval
BS EN 61482-1-2 Ed 2.0 Live working - Protective clothing against the thermal hazards of an electric arc Part 1-2: Test methods - Method 2: Determination of arc protection class of material and clothing by using a constrained and directed arc (box test)Publication
BS EN 61482-2 Ed2.0 against the thermal hazards of an electric arc Part 2: RequirementsAccepted
BS EN 61577-3 Radon and radon decay productmeasuring instruments Part 3: Specific requirements for radon decay product measuring instrumentsApproval
BS EN 61577-4 Radon and radon decay productmeasuring instruments Part 4: Equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR)Technical Review
BS EN 61587-1 Ed. 4.0 Mechanical structures for electronic equipment - Tests for IEC 60917 andIEC 60297 series Part 1: Environmental requirements; test set-up and safety aspects for cabinets; racks; subracks and chassis under indoor conditionsAccepted
BS EN 61587-6 Mechanical structures for electronic equipment Part 6: Security and performance for door locking handles for indoor cabinetsAccepted
BS EN 61995-1:2008+A1 Devices for the connection of luminaires for household and similar purposes Part 1: General requirementsAccepted
BS EN 61995-2:2009+A1 Devices for the connection of luminaires for household and similar purposes Part 2: Standard sheets for DCLPublic Comment
BS EN 62046 ED 1.0 Safety of Machinery – Application of protective equipment to detect the presence of personsPublic Comment
BS EN 62061 Ed1.0 Amd 2 safety of safety-related electrical<(>,<)> Electronic and programmable electronic control systemsPublic Comment
BS EN 62080:2009+A2 Sound signalling devices for household and similar purposesPublic Comment
BS EN 62387 Radiation protection instrumentation - Passive integrating dosimetrysystems for personal and environmental monitoring of photon and betaradiationAccepted
BS EN 62449 Connectors for electronic equipment – Product requirements – Detail specification for SCA-2 (Single Connector Attach -2) unshielded connectorsPublic Comment
BS EN 62451 HSSDC-2 Shielded ConnectorsAccepted
BS EN 62610-5 Mechanical structures for electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series Part 5: Guideline of cooling performance evaluation for indoor cabinetsAccepted
BS EN 62692 Alarm and electronic security systems - Digital door lock systems - Requirements and test methodsAccepted
BS EN 62745 Safety of machinery - Requirements for the interfacing of cableless controllers to machineryAccepted
BS EN 62820-1-1 General requirements for building intercom systems Part 1-1: General building intercom systemsAccepted
BS EN 902 Chemicals used for treatment of water intended for human consumption - Hydrogen peroxidePublic Comment
BS EN 938 Chemicals used for treatment of water intended for human consumption - Sodium chloritePublic Comment
BS EN 939 Chemicals used for treatment of water intended for human consumption - Hydrochloric acidPublic Comment
BS EN ENISO 13850 Safety of machinery - Emergency stop - Principles for designPublic Comment
BS EN ISO 13849-1:2006/Amd 1 Safety of machinery - Safety-related parts of control systems Part 1: General principles for design - Amendment 1Public Comment
BS EN ISO 14644-1 Cleanrooms and associated controlled environments. Part 1: Classification of air cleanlinessPublic Comment
BS EN ISO 14644-2 Cleanrooms and associated controlled environments - Part 2: Specifications for testing and monitoring to prove continued compliance with ISO 14644-1Public Comment
BS EN ISO 2919 radioactive sources - General requirements and classificationApproval
BS EN WI 16712-1 extinguishing agents supplied by firefighting pumps - Portable foam equipment - Part 1: Inductors PN 16Public Comment
BS EN WI 16712-2 extinguishing agents supplied by firefighting pumps - Portable foam equipment Part 2: Pick-up tubesPublic Comment
BS EN WI 16712-3 extinguishing agents supplied by firefighting pumps - Portable foam equipment Part 3: Low and medium expansion handheld foam branchpipes PN 16Public Comment
BS ENENISO 14120 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guardsApproval
BS ENISO 11074 Soil quality - VocabularyApproval
BS ENISO 11665-1 Measurement of radioactivity in the environment - Air: radon-222 Part 1: Origins of radon and its short-lived decay products and associated measurement methodsAccepted
BS ENISO 11665-2 Measurement of radioactivity in the environment - Air: radon-222 Part 2: Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay productsAccepted
BS ENISO 11665-3 Measurement of radioactivity in the environment - Air: radon-222 Part 3: Spot measurement method of the potential alpha energy concentration of its short-lived decay productsAccepted
BS ENISO 11665-5 Measurement of radioactivity in the environment - Air: radon-222 Part 5: Continuous measurement method of the activity concentrationAccepted
BS ENISO 11665-6 Measurement of radioactivity in the environment - Air: radon-222 Part 6: Spot measurement method of the activity concentrationAccepted
BS ENISO 11665-7 Measurement of radioactivity in the environment - Air: radon-222 Part 7: Accumulation method for estimating surface exhalation rateAccepted
BS ENISO 12404 Soil quality - Guidance on the selection and application of screening methodsAccepted
BS ENISO 13196 Soil quality - Sreening soils for selected elements by energy dipersive X-ray fluorescence spectrometry using a handheld or portable instrumentAccepted
BS ENISO 13355 Packaging - Complete, filled transport packages and unit loads - Vertical random vibration testAccepted
BS ENISO 13943 Fire safety - VocabularyIdea
BS ENISO 14644-12 Cleanrooms and associated controlled environments Part 12: Classification of air cleanliness by nanoscale particle concentrationPublic Comment
BS ENISO 14644-13 Cleanrooms and associated controlled environments Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classificationsAccepted
Opens a new windowBS ENISO 14644-14 environments — Assessment of suitability of equipment and materials for cleanroomsPublic Comment
BS ENISO 14644-15 Cleanrooms and associated controlled environments Part 15: Assessment of suitability for use of equipment and materials by airborne chemical and surface chemical concentrationAccepted
BS ENISO 14698 environments - Biocontamination control - Microbial cleanliness levelsAccepted
Opens a new windowBS ENISO 15009 Soil quality - Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons - Purge-and-trap method with thermal desorptionPublic Comment
BS ENISO 16198 Soil quality - Plant-based biotest to assess the environmental bioavailability of trace elements to plantsPublication
BS ENISO 16558-1 Soil quality - Risk based petroleum hydrocarbons Part 1: Determination of aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method)Public Comment
BS ENISO 16558-2 Soil quality - Risk-based petroleum hydrocarbons Part 2: Determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionisation detection (GC/FID)Public Comment
Opens a new windowBS ENISO 16852 requirements, test methods and limits for usePublic Comment
BS ENISO 17621 Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methodsPublic Comment
Opens a new windowBS ENISO 22155 Soil quality - Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers - Static headspace methodPublic Comment
BS ENISO 3925 Unsealed radioactive substances -- Identification and documentationAccepted
Opens a new windowBS ENISO 6385 Ergonomic principles in the design of work systemsPublic Comment
Opens a new windowBS ENISO 780 Packaging - Pictorial marking for handling of goodsPublic Comment
BS ENISO 9241-161 Ergonomics of human-system interaction Part 161: User-interface elementsPublic Comment
BS ENISO 9241-220 Ergonomics of human-computer interaction Part 220: Processes for enabling, executing and assessing human-centred design within organizationsAccepted
BS ENISO 9241-306 Ergonomics of human-system interaction Part 306: Field assessment methods for electronic visual displaysIdea
BS ENISO 9241-391 Ergonomics of Human System Interaction Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizuresPublication
BS IEC 60512-29-100 Ed1.0 ED 1.0 Connectors for electronic equipment - Tests and measurements Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29gPublic Comment
BS IEC 60695-11-20 Ed2.0 Fire hazard testing Part 11-20: Test flames - 500 W flame test methodsApproval
BS IEC 61017 Radiation protection instrumentation - Portable; transportable; mobile or installed equipment to measure photon radiation for environmental monitoringPublic Comment
BS IEC 61563 Ed 2.0 instrumentation Equipment for measuring specific activity of gamma-emitting radionuclides in foodstuffsAccepted
BS IEC 62401 Ed 2.0 instrumentation - Alarming Personal Radiation Devices (PRD) for detection of illicit trafficking of radioactive materialAccepted
BS ISO 11268-3 Soil quality - Effects of pollutants on earthworms Part 3: Guidance on the determination of effects in field situationsApproval
BS ISO 11504 Soil quality - Assessment of impact from soil contaminated with petroleum hydrocarbonsAccepted
BS ISO 11665-10 Measurement of radioactivity in the environment - Air: radon 222 Part 10: Determination of the diffusion coefficient in waterproof materials using activity concentration measurementPublic Comment
BS ISO 11665-11 Measurement of radioactivity in the environment - Air: radon-222 Part 11: Test method for soil gasPublic Comment
BS ISO 12749-3 Nuclear energy - Vocabulary Part 3: Nuclear fuel cyclePublic Comment
Opens a new windowBS ISO 12749-4 Nuclear energy, nuclear technologies, and radiological protection - Vocabulary Part 4: Dosimetry for radiation processingPublic Comment
BS ISO 13073-3 Ships and marine technology - Risk assessment on anti-fouling systems on ships Part 3: Human health risk assessment of biocidally active substances in anti-fouling paints on ships during the application and removal processIdea
BS ISO 13854 Safety of machinery - Minimum gaps to avoid crushing of parts of the human bodyPublic Comment
BS ISO 14024:1999/Amd 1 Environmental labels and declarations - Type I environmental labelling - Principles and procedures - Amendment 1Accepted
BS ISO 14026 Environmental labels and declarations - Communication of footprint informationIdea
BS ISO 14034 Environmental management - Environmental technology verification (ETV) and performance evaluationAccepted
BS ISO 14055-1 Environmental management - Combatting land degradation and desertification Part 1: Guidelines and general frameworkAccepted
BS ISO 14869-3 Soil quality - Dissolution for the determination of total element content Part 3: Dissolution with hydrofluoric and nitric acids using pressurised microwave techniqueAccepted
BS ISO 15382 Radiological protection - Procedures for monitoring the dose to the lens of the eye, the skin and the extremitiesPublic Comment
BS ISO 15394 Packaging - Bar code and two-dimensional symbols for shipping, transport and receiving labelsPublic Comment
BS ISO 16220 Magnesium and magnesium alloys - Magnesium alloy ingots and castingsAccepted
BS ISO 16258-1 Workplace air - Respirable crystalline silica by x-ray diffraction Part 1: Method by direct on filter analysisPublic Comment
BS ISO 16258-2 Workplace air - Respirable crystalline silica by x-ray diffraction Part 2: Method by indirect analysisPublic Comment
BS ISO 16321 Occupational eye and face protection - requirementsPublic Comment
BS ISO 16374 Evaluation method for cleanness of magnesium and magnesium alloy ingotsPublic Comment
BS ISO 16637 Radiological protection - Monitoring and internal dosimetry for staff exposed to medical radionuclides as unsealed sourcesPublic Comment
BS ISO 16638-1 Radiological protection - Monitoring and internal dosimetry for specific materials Part 1: UraniumPublic Comment
Opens a new windowBS ISO 16639 Surveillance of airborne radioactive substances in the workplace of nuclear facilitiesPublic Comment
BS ISO 16644-1 Quantification of patient activity in nuclear medicine Part 1: Determination of iodine 131 activity using the conjugate view methodPublic Comment
BS ISO 16645 Radiological protection - Medical accelerators - Radiation protection rules for installationsAccepted
BS ISO 16751-1 Soil quality - Environmental availability of non-polar organic compounds Part 1: Determination of potential availability using a strong absorbent or complexing agentIdea
BS ISO 16900-10 Respiratory protective devices - Methods of test and test equipment Part 10: Resistance to flame (including sparks) and flame engulfment of facepiece and other components including body harness, filtersPublic Comment
BS ISO 16900-12 Respiratory protective devices - Methods of test and test equipment Part 12: Leak test methodsApproval
BS ISO 16900-13 Respiratory protective devices - Methods of test and test equipment Part 13: RPD using regenerated breathable gas and special application mining escape RPD: Consolidated test for gas concentration, temperature, humidity, work of breathing, breathing resistance and durationPublic Comment
BS ISO 16900-14 Respiratory protective devices - Methods of test and test equipment Part 14: Measurement of sound levelPublic Comment
BS ISO 16900-5 Respiratory protective devices - Methods of test and test equipment Part 5: Test Equipment: Breathing machine, simulator, dummy heads and torso, toolsAccepted
BS ISO 16900-6 Respiratory protective devices - Methods of test and test equipment Part 6: Mechanical resistance/strength of componentsPublic Comment
BS ISO 16900-7 Respiratory protective devices - Methods of test and test equipment Part 7: Practical performance test methodPublic Comment
BS ISO 16900-8 Respiratory protective devices - Methods of test and test equipment Part 8: Climatic conditioningApproval
BS ISO 16900-9.2 Respiratory protective devices - Methods of test and test equipment Part 9: Determination of the carbon dioxide content of inhaled airPublic Comment
BS ISO 16975-1 Respiratory protective devices Part 1: Selection, use and maintenancePublic Comment
BS ISO 17183 Soil quality - Screening soils for alcohol-extracted organic compounds by turbidity analysisAccepted
Opens a new windowBS ISO 17183 Soil quality - Screening soils for isopropanol-extractable organic compounds by determining emulsification index by light attenuationPublic Comment
BS ISO 17305 Safety of machinery - Safety functions of control systemsIdea
BS ISO 17325-2 Ships and marine technology — Marine environment protection — Oil booms Part 2: Strength and performance requirementsPublication
BS ISO 17325-3 Ships and marine technology - Marine environment protection - Oil booms Part 3: End connectorsIdea
BS ISO 17420-1 Respiratory protective devices - Performance requirements Part 1: Supplied breathable gas devicesAccepted
BS ISO 17420-2 Respiratory protective devices - Performance requirements Part 2: Filtering devicesAccepted
BS ISO 17451-1 Alphanumeric Codification of Inventories for Shipments of Household Goods and Personal Effects Shipments Part 1: Titre manqueAccepted
BS ISO 17586 Soil quality - Assessment of the bioavailability - Extraction of metals using 0,43 mol/l nitric acid solutionPublic Comment
BS ISO 17601 Soil quality - Method to quantify the abundance of microbial communities from soil DNA extractsPublic Comment
BS ISO 17924 Soil quality - Assessment of human exposure from ingestion of soil and soil material - Guidance on the application and selection of physiologically based extraction methods for the estimation of the human bioaccessibility/bioavailability of metals inIdea
BS ISO 18158 Workplace air - TerminologyAccepted
BS ISO 18187 Soil quality - Quality of solid samples - Solid contact test using the dehydrogenase activity of Arthrobacter globiformisPublic Comment
BS ISO 18223 Nickel alloys - Determination of Nickel content - Inductively coupled plasma atomic emission spectrometric methodAccepted
BS ISO 18310-1 Radiological protection - Measurements and prediction of the ambient dose rate from patient receiving radioiodine administration after thyroid ablation Part 1: During the hospitalizationAccepted
BS ISO 18311 Soil quality - Method for testing effects of soil contaminants on the feeding activity of soil dwelling organisms - Bait-lamina testPublic Comment
BS ISO 18400-101 Soil quality - Sampling Part 101: Framework for the preparartion and application of a sampling planPublic Comment
BS ISO 18400-102 Soil quality - Sampling Part 102: Selection and application of sampling techniquesPublic Comment
BS ISO 18400-103 Soil quality - Sampling Part 103: SafetyPublic Comment
BS ISO 18400-104 Soil quality - Sampling Part 104: Strategies and statistical evaluationsAccepted
BS ISO 18400-105 Soil quality - Sampling Part 105: Package, transport, storage, preservationPublic Comment
BS ISO 18400-106 Soil quality - Sampling Part 106: Quality control and quality assurancePublic Comment
BS ISO 18400-107 Soil quality - Sampling Part 107: Recording and reportingPublic Comment
BS ISO 18400-201 Soil quality - Sampling Part 201: Pretreatment in the fieldPublic Comment
BS ISO 18400-202 Soil quality - Sampling Part 202: Preliminary investigationsAccepted
BS ISO 18400-203 Soil quality - Sampling Part 203: Investigation of potentially contaminated sitesAccepted
BS ISO 18400-204 Soil quality - Sampling Part 204: Guidance on sampling of soil gasAccepted
BS ISO 18417 Iodine charcoal sorbents for nuclear facilities - Method for defining sorption capacity indexAccepted
BS ISO 18504 Soil quality - Guidance on sustainable remediationAccepted
BS ISO 18574 Internet of Things (IoT) in the supply chain - Containerized cargoIdea
BS ISO 18575 Internet of Things (IoT) in the supply chain - Products & product packagesIdea
BS ISO 18576 Internet of Things (IoT) in the supply chain - Returnable transport items (RTIs)Idea
BS ISO 18577 Internet of Things (IoT) in the supply chain - Transport unitsIdea
BS ISO 18589-2 Measurement of radioactivity in the environment - Soil Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samplesPublication
BS ISO 18589-3 Measurement of radioactivity in the environment - Soil Part 3: Measurement of gamma-emitting radionuclidesApproval
BS ISO 18616-1 Returnable transport system - Reusable, rigid plastics distribution boxes Part 1: General purpose applicationAccepted
BS ISO 18616-2 Returnable transport system - Reusable, rigid plastics distribution boxes Part 2: General specifications for testingAccepted
BS ISO 18634 Environmental management - Environmental technology verification (ETV) and performance evaluationIdea
BS ISO 18677 Method of analyzing oxygen for evaluating magnesium and magnesium alloysAccepted
BS ISO 18762 Tubes of titanium and titanium alloys - Welded tubes for condensers and heat exchangers - Technical deliverly conditionsAccepted
BS ISO 18763 Determination of the toxic effects of pollutants on germination and early growth of higher plantsPublic Comment
BS ISO 19030-1 Ships and marine technology - Measurement of changes in hull and propeller performance Part 1: General principlesIdea
BS ISO 19030-2 Ships and marine technology - Measurement of changes in hull and propeller performance Part 2: Enabling performance based contracts and intercompany reportingIdea
BS ISO 19030-3 Ships and marine technology - Measurement of changes in hull and propeller performance Part 3: Enabling intra-company reportingIdea
BS ISO 19059 Magnesium and magnesium alloys - Determination of berylliumAccepted
BS ISO 19060 Magnesium and magnesium alloys - Determination of tinAccepted
BS ISO 19087 Workplace air - Measurement of respirable crystalline silica by infrared spectrometryAccepted
BS ISO 19204 Soil quality - Procedure for site-specific ecological risk assessment of soil contamination (TRIAD approach)Accepted
BS ISO 19361 Measurement of radioactivity - Determination of beta emitting radionuclide activities - Test method using liquid scintillation countingIdea
BS ISO 19443 Quality management systems - Specific requirements for the application of ISO 9001 and IAEA GS-R requirements by organizations in the Supply Chain of the Nuclear Energy sectorIdea
BS ISO 19461 Radiological protection - Measurement for the clearance of waste contaminated with radioisotopes for medical applicationIdea
BS ISO 19581 Measurement of radioactivity - Gamma emitting radionuclides - Rapid test method using NaI(Tl) gamma-ray spectrometryIdea
BS ISO 19709-1 Packaging - Small load carrier systems Part 1: Common requirements and test methodsAccepted
BS ISO 19709-2 Packaging - Small Load Carrier Systems Part 2: Column Stackable System (CSS)Accepted
BS ISO 19709-3 Packaging Small Load Carrier Systems Part 3: Bond Stackable System (BSS)Accepted
BS ISO 19818 Requirements for eye and face protection against laser radiationIdea
BS ISO 20051 Accessibility of the door and handle of the electronic home appliancesIdea
BS ISO 20131-1 Soil quality - Simple laboratory assessments for characterizing the denitrification in soil Part 1: Soil denitrifying enzymes activitiesIdea
BS ISO 20131-2 Soil quality - Simple laboratory assessments for characterizing the denitrification in soil Part 2: Assessment of the capacity of soils to reduce N2OIdea
BS ISO 20244 Soil quality --- On-site test method to quickly determine gravimetric water contents in soil by refractometryIdea
BS ISO 20785-3 Dosimetry for exposures to cosmic radiation in civilian aircraft Part 3: Measurements at aviation altitudesPublic Comment
BS ISO 2100 Aircraft - Electrical connectors - TestsAccepted
BS ISO 21067-1 Packaging - Vocabulary Part 1: General termsPublic Comment
BS ISO 21891 Aerospace electrical requirements - Insulating, heat shrink, sleeves and moulded shapses - Specification for aircraft useIdea
BS ISO 28007-1 for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract)Public Comment
BS ISO 28007-2 Ships and marine technology - Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract) Part 2: International model set of maritime rules for the use of force (RUF) - The 100 series rulesAccepted
BS ISO 28219 Packaging - Labelling and direct product marking with linear bar code and two-dimensional symbolsPublic Comment
BS ISO 29400 Ships and marine technology - Offshore wind energy - Ports and marine operationsPublic Comment
Opens a new windowBS ISO 29404 Ships and marine technology - Specific requirements for offshore wind farm components - Supply chain information flowPublic Comment
BS ISO 6501 Ferronickel - Specification and delivery requirementsAccepted
BS ISO 6707-3 Buildings and civil engineering works - Vocabulary Part 3: Sustainability termsAccepted
BS ISO 6858 Aircraft - Ground support electrical supplies - General requirementsAccepted
BS ISO 7503-1 Evaluation of surface contamination Part 1: Beta-emitters (maximum beta energy greater than 0,15 MeV) and alpha-emittersPublic Comment
BS ISO 7503-2 Evaluation of surface contamination Part 2: Tritium surface contaminationPublic Comment
BS ISO 7503-3 Evaluation of surface contamination Part 3: Isomeric transition and electron capture emitters, low energy beta-emitters (E bêtamax less than 0,15 MeV)Public Comment
BS ISO 7524 Nickel, ferronickel and nickel alloys - Determination of carbon content - Infra-red absorption method after induction furnace combustionIdea
BS ISO 7526 Nickel, ferronickel and nickel alloys - Determination of sulfur content - Infra-red absorption method after induction furnace combustionIdea
BS ISO 7530-1 Nickel alloys - Flame atomic absorption spectrometric analysis Part 1: Determination of cobalt, chromium, copper, iron and manganesePublic Comment
BS ISO 80079-20-2Public Comment
BS ISO 8049 Ferronickel shot - Sampling for analysisAccepted
BS ISO 8769 Reference sources - Calibration of surface contamination monitors - Alpha-, beta- and photon emittersPublic Comment
BS ISO 9241-112 Ergonomics of human-system interaction Part 112: Principles and general guidance for the presentation of informationIdea
BS ISO 9241-125 Ergonomics of human-system interaction Part 125: Guidance on visual presentation of informationAccepted
BS ISO 9241-333 Ergonomics of human-system interaction Part 333: Stereoscopic displays using glassesIdea
BS ISO 9241-392 Ergonomics of human-system interaction Part 392: Ergonomic requirements for the reduction of visual fatigue from stereoscopic imagesApproval
BS ISO 9241-940 Ergonomics of human-system interaction Part 940: Evaluation of tactile and haptic interactionsAccepted
BS ISO 9241-960 Ergonomics of human-system interaction Part 960: Framework and guidance for gesture interactionsAccepted
BS ISO/IEC 80079-36 Explosive atmospheres Part 36: Non-electrical equipment for use in explosive atmospheres - Basic methods and requirementsApproval
BS ISO/IEC 80079-37 Explosive atmospheres Part 37: Non-electrical equipment for use in explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k'Approval
BS ISO/IEC 80079-38 Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground minesApproval
BS ISO/TS 17182 Soil quality - Determination of some selected phenols and chlorophenols - Gas chromatographic method with mass spectrometric detectionPublic Comment
BSEN60695-1-12 ED 1.0 Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineeringPublic Comment
PD 5304 Guidance on safe use of machineryApproval
PD CEN/TR 16748 Aluminium and Aluminium alloys - Mechanical Potential of Al-Si alloys for High Pressure, Low Pressure and Gravity Die CastingPublication
PD CEN/TR 16788 Characterization of sludges - Guideline of good practice for thermal processesApproval
PD CEN/TR 16793 Application guidance for the use of flame arrestersApproval
PD CEN/TR 16815 CAN open on RCV?s (CleANopen)Approval
PD CEN/TR 4646 Aerospace series - Fibres and cables of optical contact EN4531 - Aircraft use - TR n°4646null
PD CEN/TR 4653 Aerospace series - Technical specification of plating of connectors Cadmium and hexavalent Chromium replacementnull
PD CEN/TR 4654-001 Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, EN4644 specific products Part 1 : Technical specificationnull
PD CEN/TR 4654-002 Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, EN4644 specific products Part 002: Specification of performance and list of technical reportsnull
PD CEN/TR 4654-003 Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, EN4644 specific products Part 003: Inserts with PC tails electrical contacts -Technical reportnull
PD CEN/TR 4654-010 Aerospace series - Connectors, electrical Part 010: 1Q18 connectors - Technical reportnull
PD CEN/TR 4654-200 Aerospace series - Connectors, electrical Part 200: Size 8 male quadrax contact pc tails – Technical reportnull
PD CEN/TR 4680 Aerospace series - Contacts, electrical, qualification for change of materials and processAccepted
PD CEN/TR 6058 ED 11 Aerospace series: Cable code identification listIdea
PD CEN/TS 15989 Fire fighting vehicles and equipment - Symbols for operator controls and other displaysIdea
PD CEN/TS 16660 Characterization of waste - Leaching behaviour test - Determination of t he reducing character and the reducing capacityPublication
PD CEN/TS 16766 Bio-based products - Bio-based solvents - Requirements, application classes and test methodsApproval
PD CEN/TS 16786 Road restraint systems — Truck Mounted Attenuators — Performance classes, impact test acceptance criteria and test methodsApproval
PD CENISO/TS 29843-1 microbial diversity Part 1: Method by phospholipid fatty acid analysis (PLFA) and phospholipid ether lipids (PLEL) analysisPublication
PD CLC/TS 50131-5-1 Alarm systems - Intrusion systems Part 5-1: Interconnections - Requirements for wired Interconnection for I&HAS equipments located in supervised premisesIdea
PD CLC/TS 50398-2 Alarm systems - Combined and integrated systems Part 2: Implementation guidelines for EN 50398-1Idea
PD CLC/TS 50634 Active laser measurement and sensing detectorIdea
PD IEC/PAS 61076-3-122 Detail specification for rugged 8-way, shielded, free and fixed connectorsApproval
PD IEC/TR 61916 Electrical accessories - Harmonization of general rulesPublication
PD IEC/TS 60204-34 Ed 1.0 Safety of machinery - Electrical equipment of machines Part 34: Requirements for machine toolsAccepted
PD IEC/TS 60695-2-20 Fire hazard testing -- Part 2-20: Glowing/hot wire based test methods - Hot wire coil ignitability - Apparatus, confirmatory test arrangement and guidanceIdea
PD IEC/TS 60695-6-2 ED 3.0 TR Fire hazrd testing - Part: 6-2: Smoke obscuration - Summary and relevance of test methodsAccepted
PD IEC/TS 61496-4-3 Ed 1.0 Safety of machinery - Electro-sensitive protective equipment Part 4: Particular requirements for equipment using vision based protective devices (VBPD)Publication
PD IEC/TS 61586 Estimation of the reliability of electrical connectorsAccepted
PD IEC/TS 62450 Technical Specification for 40 pin SCA 2 connector with parallel selectionPublic Comment
PD IEC/TS 62452 Testing and performance requirements for high speed serial and parallel- serial copper linksAccepted
PD IEC/TS 62735 D.C. plugs and socket-outlets for ICT equipment installed in data centres and telecom central officesPublic Comment
PD ISO/TR 14055-2 Environmental management - Combatting land degradation and desertification Part 2: Case studiesIdea
PD ISO/TR 22100-1 Safety of machinery - Relationship with ISO 12100 Part 1: How ISO 12100 relates to type-B and type-C standardsAccepted
PD ISO/TR 24119 masking in serial connections of guard interlocking devices with potential-free contactsPublication
PD ISO/TS 18090-1 Characteristics of reference pulsed radiation Part 1: Photon radiationPublication
PD ISO/TS 18614-1 Packaging - Label Material Part 1: Questions for Material DeterminationIdea
PD ISO/TS 18614-2 Packaging - Label Material Part 2: Specification of MaterialIdea
PD ISO/TS 19837 Safety of Machinery - Trapped Key Interlocking Devices Principles for design and selectionIdea

[ back to top ]

Published standards (102)

Sort by: Reference | Title | Status

Standard referenceNameStatus
BS 1339-1:2002Humidity - Terms, definitions and formulaeCurrent
BS 4422-1:1987Glossary of terms associated with fire - General terms and phenomena of fireWithdrawn
BS 4422-2:1990Glossary of terms associated with fire - Structural fire protectionWithdrawn
BS 4422-3:1990Glossary of terms associated with fire - Fire detection and alarmWithdrawn
BS 4422-4:1975Glossary of terms associated with fire - Fire protection equipmentWithdrawn
BS 4422-5:1989Glossary of terms associated with fire - Smoke controlWithdrawn
BS 4422-6:1988Glossary of terms associated with fire - Evacuation and means of escapeWithdrawn
BS 4422-7:1988Glossary of terms associated with fire - Explosion detection and suppression meansWithdrawn
BS 4422-9:1990Glossary of terms associated with fire - Marine termsWithdrawn
BS 4422:2005Fire. VocabularyCurrent
BS 6068-1-1.1:1987Water quality. Glossary - Terms relating to types of water, and treatment and storage of waste waterWithdrawn
BS 6068-1-1.2:1990Water quality. Glossary - Additional terms relating to types of water, and treatment and storage of water and waste water, and terms used in sampling and analysis of waterWithdrawn
BS 6068-1-1.5:1987Water quality. Glossary - An additional 49 termsWithdrawn
BS 6068-1-1.6:1987Water quality. Glossary - An additional 42 termsWithdrawn
BS 6068-1-1.7:1991Water quality. Glossary - An additional 47 termsWithdrawn
BS 6068-1.1:1996Water quality. Glossary - Terms relating to types of water, and treatment and storage of waste waterWithdrawn
BS 6068-1.2:1997Water quality. Glossary - Additional terms relating to types of water, and treatment and storage of water and waste water, and terms used in sampling and analysis of waterWithdrawn
BS 6068-1.4:1993Water quality. Glossary - An additional 18 termsCurrent
BS 6068-1.5:1996Water quality. Glossary - An additional 49 termsWithdrawn
BS 6068-1.6:1996Water quality. Glossary - An additional 41 termsWithdrawn
BS 6068-1.7:1997Water quality. Glossary - An additional 51 termsWithdrawn
BS 6068-1.9:1998Water quality. Glossary - Alphabetical list and subject indexCurrent
BS 6069-2:1983Characterization of air quality. - GlossaryWithdrawn
BS 6069-2:1994Characterization of air quality - GlossaryCurrent
BS 6100-2.7:1992Glossary of building and civil engineering terms. Civil engineering - Public health. Environmental engineeringWithdrawn
BS 6458-1:1990Fire hazard testing for electrotechnical products - Glossary of termsWithdrawn
BS 6967:1988Glossary of terms for personal eye-protectionWithdrawn
BS 7755-1.1:1997Soil quality. Terminology and classification - Terms and definitions relating to the protection and pollution of soilWithdrawn
BS 7755-1.2:1999Soil quality. Terminology and classification - Terms and definitions relating to samplingWithdrawn
BS 7755-1.4:2000Soil quality. Terminology and classification - Terms and definitions related to the rehabilitation of soils and sites - Section 1.4: Terms and definitions related to the rehabilitation of soils and sitesWithdrawn
BS EN 1005-1:2001+A1:2008Safety of machinery. Human physical performance - Terms and definitionsCurrent
BS EN 1070:1998Safety of machinery. TerminologyWithdrawn
BS EN 1085:1997Wastewater treatment. VocabularyWithdrawn
BS EN 1085:2007Wastewater treatment. VocabularyCurrent
BS EN 12258-3:2003Aluminium and aluminium alloys. Terms and definitions - ScrapCurrent
BS EN 12258-4:2004Aluminium and aluminium alloys. Terms and definitions - Residues of the aluminium industryCurrent
BS EN 1317-1:1998Road restraint systems - Terminology and general criteria for test methodsWithdrawn
BS EN 1317-1:2010Road restraint systems - Terminology and general criteria for test methodsCurrent
BS EN 13193:2000Packaging. Packaging and the environment. TerminologyCurrent, Work in Hand
BS EN 132:1999Respiratory protective devices. Definitions of terms and pictogramsCurrent, Work in Hand
BS EN 13237:2003Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheresWithdrawn
BS EN 13237:2012Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheresCurrent
BS EN 134:1998Respiratory protective devices. Nomenclature of componentsCurrent
BS EN 135:1991Respiratory protective devices. List of equivalent termsWithdrawn
BS EN 135:1999Respiratory protective devices. List of equivalent termsCurrent
BS EN 13965-2:2004Characterization of waste. Terminology - Management related terms and definitionsWithdrawn
BS EN 13965-2:2010Characterization of waste. Terminology - Management related terms and definitionsCurrent
BS EN 14564:2004Tanks for transport of dangerous goods. TerminologyWithdrawn
BS EN 14564:2013Tanks for transport of dangerous goods. TerminologyCurrent
BS EN 15144:2007Winter maintenance equipment. Terminology. Terms for winter maintenanceCurrent
BS EN 1540:1998Workplace atmospheres. TerminologyWithdrawn
BS EN 1540:2011Workplace exposure. TerminologyCurrent
BS EN 15602:2008Security service providers. TerminologyCurrent
BS EN 16323:2014Glossary of wastewater engineering termsCurrent
BS EN 165:1996Personal eye-protection. VocabularyWithdrawn
BS EN 165:2005Personal eye-protection. VocabularyWithdrawn
BS EN 16575:2014Bio-based products. VocabularyCurrent
BS EN 1846-1:1998Firefighting and rescue service vehicles - Nomenclature and designationWithdrawn
BS EN 1846-1:2011Firefighting and rescue service vehicles - Nomenclature and designationCurrent
BS EN 1868:1997Personal protective equipment against falls from a height. List of equivalent termsCurrent
BS EN 292-1:1991Safety of machinery. Basic concepts, general principles for design - Basic terminology, methodologyWithdrawn
BS EN 292-2:1991Safety of machinery. Basic concepts, general principles for design - Technical principles and specificationsWithdrawn
BS EN 374-1:1994Protective gloves against chemicals and micro-organisms - Terminology and performance requirementsWithdrawn
BS EN 374-1:2003Protective gloves against chemicals and micro-organisms - Terminology and performance requirementsCurrent, Work in Hand
BS EN 60695-4:1996Fire hazard testing - Terminology concerning fire testsWithdrawn
BS EN 60695-4:2006Fire hazard testing - Terminology concerning fire tests for electrotechnical productsWithdrawn
BS EN 60695-4:2012Fire hazard testing - Terminology concerning fire tests for electrotechnical productsCurrent
BS EN 60743:1997Terminology for tools and equipment to be used in live workingWithdrawn
BS EN 60743:2001+A1:2008Live working. Terminology for tools, equipment and devicesCurrent
BS EN 60743:2013Live working. Terminology for tools, devices and equipmentCurrent
BS EN 614-1:1995Safety of machinery. Ergonomic design principles - Terminology and general principlesWithdrawn
BS EN ISO 10075-1:2000Ergonomic principles related to mental workload - General terms and definitions (ISO 10075:1991)Current
BS EN ISO 12100-1:2003+A1:2009Safety of machinery. Basic concepts, general principles for design - Basic terminology, methodologyWithdrawn
BS EN ISO 12100-2:2003+A1:2009Safety of machinery. Basic concepts, general principles for design - Technical principlesWithdrawn
BS EN ISO 13731:2002Ergonomics of the thermal environment. Vocabulary and symbolsCurrent
BS EN ISO 13943:2000Fire safety. VocabularyWithdrawn
BS EN ISO 13943:2010Fire safety. VocabularyCurrent
BS EN ISO 14050:2010Environmental management. VocabularyCurrent
BS EN ISO 14644-6:2007Cleanrooms and associated controlled environments - VocabularyCurrent
BS EN ISO 26800:2011Ergonomics. General approach, principles and conceptsCurrent
BS EN ISO 4007:2012Personal protective equipment. Eye and face protection. VocabularyCurrent
BS EN ISO 9241-302:2008Ergonomics of human-system interaction - Terminology for electronic visual displaysCurrent
BS EN ISO 9241-303:2008Ergonomics of human-system interaction - Requirements for electronic visual displaysWithdrawn
BS IEC 60050-651:1999International electrotechnical vocabulary - Live workingCurrent, Work in Hand
BS ISO 11074:2005Soil quality. VocabularyCurrent, Work in Hand
BS ISO 12749-2:2013Nuclear energy, nuclear technologies, and radiological protection. Vocabulary - Radiological protectionCurrent
BS ISO 14050:2002Environmental management. VocabularyWithdrawn
BS ISO 16165:2001Ships and marine technology. Marine environment protection. Terminology relating to oil spill responseWithdrawn
BS ISO 16165:2013Ships and marine technology. Marine environment protection. Terminology relating to oil spill responseCurrent
BS ISO 4880:1993Burning behaviour of textiles and textile products. VocabularyWithdrawn
BS ISO 4880:1997Burning behaviour of textiles and textile products. VocabularyCurrent
BS ISO 5805:1997Mechanical vibration and shock. Human exposure. VocabularyCurrent
BS ISO 6107-1:2004Water quality. Vocabulary - Part 1Current
BS ISO 6107-2:2006+A1:2012Water quality. Vocabulary - Part 2Current
BS ISO 6107-3:1993Water quality. Vocabulary - Part 3Current
BS ISO 6107-5:2004Water quality. Vocabulary - Part 5Current
BS ISO 6107-6:2004Water quality. Vocabulary - Part 6Current
BS ISO 6107-7:2006Water quality. Vocabulary - Part 7Current
BS ISO 6107-8:1993Water quality. Vocabulary - Part 8Current
DD ENV 1070:1993Safety of machinery. TerminologyWithdrawn
PD CEN ISO/TR 11610:2004Protective clothing. VocabularyCurrent
PD CLC/TR 50531:2009Alarm systems. Terms and definitionsCurrent

[ back to top ]

Committees (43)

Sort by: Reference | Name

Committee ReferenceTitle
ACE/6Aerospace avionic electrical and fibre optic technology
EH/2Air quality
PH/9Applied ergonomics
CB/101/-/2Basic Data - Terminology
MI/2Bio-based products
TCI/66/-/8Burning behaviour
B/508/3Characterization of waste
CII/59Chemicals for drinking water treatment
LBI/30Cleanroom technology
PEL/23Electrical accessories
EPL/48Electromechanical components and mechanical structures for electronic equipment
GW/1Electronic security systems
GEL/1Electrotechnical Terminology
SES/1Environmental management
EXL/23Explosion and fire precautions in industrial and chemical plant
PH/2Eye protection
FSH/17/9Fire appliances and associated operational equipment
FSH/17Fire brigade equipment
GEL/89Fire hazard testing
FSH/9Fire terminology
EH/2/4General aspects
CPI/29Humidity and temperature conditioning requirements
NFE/35Light metals and their alloys
GW/3Manned security services
I/-Miscellaneous standards materials and chemicals
PKW/0Packaging
PH/5Personal Fall Protection
PH/3Protective clothing
PH/3/8Protective gloves
NCE/2Radiation protection and measurement
PH/4Respiratory protection
B/509/1Road restraint systems
MCE/3Safeguarding of machinery
SME/32/-/2Ships and marine technology - Maritime environment protection
SME/32Ships and marine technology - Steering committee
EH/5Sludge characterization
EH/4Soil quality
AUE/18Tanks for the transport of dangerous goods
PEL/78Tools for live working
B/505Wastewater engineering
EH/3Water quality
B/513/-/16Winter maintenance and road surface and maintenance equipment
EH/2/2Work place atmospheres

[ back to top ]

Need Help?

We are here to help you with any queries. Email us for help.

But first, why not view the Help Pages?